Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

By Scale

822 products


  • 67076-4, Traxxas Rustler 4X4 VXL Brushless RTR 1/10 4WD Stadium Truck w/TQi 2.4GHz Radio & TSM 67076-4, Traxxas Rustler 4X4 VXL Brushless RTR 1/10 4WD Stadium Truck w/TQi 2.4GHz Radio & TSM

    Traxxas 67076-4, Traxxas Rustler 4X4 VXL Brushless RTR 1/10 4WD Stadium Truck w/TQi 2.4GHz Radio & TSM

    2 in stock

    67076-4, Traxxas Rustler 4X4 VXL Brushless RTR 1/10 4WD Stadium Truck w/TQi 2.4GHz Radio & TSM The Rustler 4X4 VXL is a hard-charging wheelie machine that captures the speed and classic style of the number-one-selling Rustler and injects it with brutal 4-wheel drive performance, increased durability, and even more fun! Bury the throttle and the Rustler 4X4 launches its front wheels skyward as it shreds the ground underneath. Beneath the sleek clipless body, the heavy duty driveline delivers extreme Velineon brushless horsepower. The larger Talon EXT wheels and tires provide versatility and grip for any terrain, from backyard trails to concrete skate parks. Rustler 4X4 VXL destroys convention to become the new performance and fun standard for 4x4 stadium trucks! Updated Chassis The low-CG chassis positions the weight low for aggressive handling. The wheelbase has been lengthened 20mm for the perfect balance of stability and quick response. Brushless Velineon power flows through a larger Revo®-Spec slipper clutch and new extreme heavy-duty driveshafts to ensure performance and strength. Self-Righting The Rustler 4X4 VXL uses Traxxas’ patented Self-Righting feature to keep the fun going, even when you get carried away with the wheelies or land that big trick upside down. Simply press a button on the TQi transmitter and, in most circumstances, the Rustler 4X4 VXL will be back on its wheels in just seconds and ready for more action! Clipless Body Mounting Similar to the flagship E-Revo, the Rustler 4X4 VXL uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. The sleek, aerodynamic body features a rugged internal structure and external rollover protection for long life and Traxxas-Tough™ durability. Features: Modular Chassis Velineon 3500 Motor VXL-3s ESC Waterproof Receiver Box 5-Channel Receiver with Failsafe Talon EXT 2.8" Tires & Black Chrome Wheels Ultra Shocks Progressive Rate Springs Single Screw Motor Access Digital High-Torque Waterproof Steering Servo Revo-Spec Oil-Filled Differentials Updated Front & Rear Bumpers Updated Heavy-Duty Composite Arms Extruded Aluminum Driveshaft Extreme Heavy-Duty Driveshafts Optimum-Geometry Steering with Integrated Servo Saver Heavy-Duty 32-Pitch Gears Heavy-Duty 4mm Turnbuckles Updated Prographix Body Functional Rear Wing Secure Body Latch Improved Battery Hold-Down Rubber-Sealed Ball Bearings Wheelie Bar Specifications: Length: 18.78 inches (477mm) Width: 12.94 inches (329mm) Ground Clearance: 1.1 inches (27mm) Weight: 5.12lbs (2.32 kg) Height: 6.35 inches (161mm) Wheelbase: 11.62 inches (295mm) Front Shock Length: Long Rear Shock Length: XX-Long Tires (pre-glued): 4.5” x 2.3” (114mm x 58mm) Talon™ EXT Wheels: 2.8 inches (71mm) Black Chrome Speed Control: VXL-3s™ Motor (electric): Velineon® 3500 Brushless Transmission: Single speed Overall Drive Ratio: 13.97:1 Differentials: Sealed, 2-gear Chassis Structure / Material: Composite tub Brake Type: Electronic Drive System: Shaft driven 4WD Steering: Bellcrank with integrated servo saver Radio System: TQi™ 2.4GHz 2-ch transmitter with TRA6533 TSM receiver Servo: Waterproof #2075 Top Speed (optional gearing): 65+ mph with 3-cell LiPo and 20/54 gearing Skill Level: 1 Battery Compartment: 143mm x 50mm x 25mm *42mm with optional battery strap (included) Needed To Complete: 2S or 3S LiPo Battery w/Traxxas Connector Compatible Battery Charger This product was added to our catalog on April 12, 2021

    2 in stock

    $399.99

  • 75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer w/2.4GHz 2-Channel Radio 75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer w/2.4GHz 2-Channel Radio

    Traxxas 75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer w/2.4GHz 2-Channel Radio

    5 in stock

    75054-5, Traxxas LaTrax Rally 1/18 4WD RTR Rally Racer (Red) w/2.4GHz 2-Channel Radio The LaTrax Rally 1/18 incorporates precision and performance into a compact and incredibly affordable model that goes with you anywhere and is ready for fun in an instant. The LaTrax Rally is fully assembled and Ready-to-Race, with everything you need included in the package. The powerful motor, all-wheel drive, and fully independent suspension immediately transform the world beneath your feet into a racetrack. Offices, malls, sidewalks, and playgrounds are the site for your next racing challenge. Long run times and the dependable 2.4GHz radio system extend your playtime. The LaTrax Rally is built to last, protected by world-class Traxxas support, 100% parts availability, and the Traxxas Lifetime Electronics Warranty. The LaTrax 1/18 Rally captures the distinctive look and exciting performance of a true rally car with its lowered stance, tough wide-body styling, and 12-spoke rally wheels. The model is an impressive street machine on asphalt while the fully independent suspension, full-time 4WD, and all-weather electronics carry it confidently off-road. Hang it out in the turns and hustle down the straights with the perfect blend of speed, power, and traction—4WD makes it easy to drive like a pro! The suspension system has been expertly engineered for high-performance handling right down to the coil-over friction shocks and firm, road-tuned springs. The chassis balances strength, weight, function, and style in an impressive achievement of packaging and performance optimization that's built for hours of driving fun. High Capacity 6-volt NiMH Battery Pack with iD™ LaTrax 1/18 Rally includes an iD-equipped 6V NiMH battery and convenient AC wall outlet charger. This potent pack features heavy-duty construction, 16-gauge wires and Traxxas' exclusive patented High-Current Connector for efficient power transfer, run after run. Everything you need is in the box, even 4 AA alkaline batteries! Accessory Traxxas iD chargers (sold separately) auto-detect LaTrax/Traxxas iD-equipped batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity. Waterproof, All-Weather Electronics for No-Limits Radio Control Fun! Waterproof, all-weather electronics open the door to new driving adventures on water-soaked racing surfaces. The 1/18 LaTrax Rally doesn't slow down for rain, puddles, ice, or snow! The waterproof servo and weather-sealed receiver box (patent pending) let you keep going, even in wet conditions that stop other cars in their tracks. It's total driving freedom! 100% Fully Assembled and Ready-To-Run The 1/18 LaTrax Rally is fully assembled with a 2.4GHz radio system, painted and decaled body, pre-glued tires, and easy instructions. A LaTrax 6V rechargeable NiMH battery pack, wall outlet charger, and 4 Traxxas Power Cell AA alkaline batteries are also included. Everything you need for fun is in the box. Features: Fully assembled and Ready-To-Run Tough, rally-inspired body design with cutting edge graphics Pre-glued, low-profile slick tires mounted on white, 12-spoke rally wheels Impact-absorbing foam front bumper Adjustable-height body mounts Waterproof, all-weather electronic speed control Innovative all-weather design Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Forward / Brake / Reverse Race Mode – Forward / Brake Training Mode – 50% Forward / Brake / 50% Reverse EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design Smooth, high-frequency operation Powerful 370 brushed motor Includes LaTrax 6V 5-cell NiMH battery pack and wall outlet charger High-torque waterproof sub-micro steering servo Weather-sealed receiver box (patent pending) Full-time 4WD Front and rear gear differentials Front C-hub design with universal driveshafts Rear axle carrier with universal driveshafts Coil-over shocks with variable mounting positions 4-wheel fully independent suspension Fiber-composite chassis Speed control and receiver are securely fastened to chassis Quick-release battery hold-down for fast battery pack changes 2.4GHz transmitter 2-channel transmitter Servo reversing Electronic steering trim controls Low battery indicator Internal antenna Distinctive, ergonomic, contour grip Award-winning Traxxas support and parts availability Manufacturer Lifetime Electronics Warranty Specifications: Length: 10.4" (265mm) Front Track: 4.17" (106mm) Rear Track: 4.23" (107.5mm) Weight (with battery): 19.5oz (554g) Weight (without battery): 15.2oz (430g) Height (overall): 3.5" (90mm) Wheelbase: 6.5" (165.3mm) Wheel Diameter: 1.3" (33mm) This product was added to our catalog on May 23, 2021

    5 in stock

    $119.99

  • 89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM 89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM

    Traxxas 89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM

    4 in stock

    89086-4, Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck w/TQi 2.4GHz Radio & TSM The Traxxas WideMaxx 1/10 Brushless RTR 4WD Monster Truck with WideMaxx Kit is the next level in ultimate basher chassis. This special chassis comes equipped with the WideMaxx suspension kit from the factory for greater stability. Traxxas has totally revamped the Maxx chassis for this release. Starting on the four corners, Traxxas equipped this truck with the Sledgehammer tires. These tires feature an open-block design that clears away mud allowing for unreal traction. Moving to the suspension, Traxxas then equipped the truck with the WideMaxx suspension set. This extends the width over 1.5 inches improving stability. To further add to the stability, a longer chassis is used allowing allowing the use of larger and more powerful batteries. All of these features come together to make the Traxxas Maxx an extremely durable and stable chassis. With six colors to choose from, the Traxxas Maxx with WideMaxx will be able to exceed expectation. Features: Refined shock tower design Full length motor cradle Updated wheels and tires Clipless Body Mount System Quick one-hand installation and removal Waterproof WideMaxx double-shear suspension arms 1.57” (40 mm) wider for improved handling Tough composite formula resists impact damage, even in cold weather Modular chassis design GT-Maxx Aluminum Shocks 60+ MPH with optional gearing and single 4S LiPo battery (sold separately) Full contact sealed bearings Torque-biasing center drive Easy Battery Access Extended battery tray accepts Traxxas’ 6700mAh 4-cell LiPo battery Aluminum splined driveshaft Steel gear differentials Extreme-duty telescoping driveshafts Specifications: Length: 22.50 inches (572mm) Front Track: 15.95 inches (405mm) Rear Track: 15.95 inches (405mm) Ground Clearance (lowest skid): 1.90 inches (49mm) Ground Clearance (center skid): 2.6 inches (67mm) Weight: 10.40 lbs (4.7kg) Height (ride): 9.12 inches (232mm) Wheelbase: 13.85 inches (352mm) Shock Length: 4.90 inches (124mm) Tire Diameter: 5.64 inches (143mm) Wheel Diameter: 2.8 / 3.6 inches (70 / 92mm) Speed Control: Velineon VXL-4s Motor (electric): 540XL (2400 kV) Transmission: Single-Speed Overall Drive Ratio: 12.37 (23/50 motor pinion and spur gear) Included: (1) Traxxas Maxx with WideMaxx and Traxxas 540XL brushless motor (1) Quick Start Guide (1) TQi 2.4GHz radio system High quality maintenance tools Needed to Complete: (1) 3-4S LiPo Battery with Traxxas ID connector (1) Compatible Traxxas LiPo Balance Charger (4) AA Batteries This product was added to our catalog on April 12, 2021

    4 in stock

    $579.99

  • 97074-1, Traxxas 1/18 Scale TRX-4M W/Ford Bronco Body 97074-1, Traxxas 1/18 Scale TRX-4M W/Ford Bronco Body

    Traxxas 97074-1, Traxxas 1/18 Scale TRX-4M W/Ford Bronco Body

    Out of stock

    97074-1, TRX-4M Scale and Trail Crawler with Ford Bronco Body: 1/18-Scale 4WD Electric Truck with TQ 2.4GHz Radio System The Traxxas TRX-4M 1/18 Electric Rock Crawler with Ford Bronco Body is an adventure-driven micro crawler that can be found at your local hobby shop! The highly detailed ABS bodyshell features clipless mounting to the rigid C-channel frame. This frame is supported by four oil-filled GTM shocks to add control and keep the body from bouncing around. Scale straight axles are connected to the frame using full 4-link suspension. Adding to the performance, this truck features up to 45° steering angle to help tackle the trail ahead. Head over to your local hobby shop and inquire about the Traxxas TRX-4M Rock Crawler! While your local hobby shop will have the truck, here at AMain we have a wide array of option parts available to make your TRX-4M a fully capable crawling machine! Check out awesome screw kits, scale wheels and tires, and much more from some of your favorite brands in RC! Features: Highly detailed licensed body shell made of durable ABS Triangulated 4-link front and rear suspension Oil-filled GTM shocks Wheels and tires mounted to 7mm hex Full-time shaft-driven 4-wheel drive Low-CG Battery Tray Superior 45° steering angle Direct steering (no servo saver) Powerful Titan® 87-turn brushed motor ECM-2.5 Electronic Control Module incorporates ESC, receiver, and LED controller Fully waterproof for all-weather fun Includes transmitter, battery and charger for out of the box fun Specifications Scale: 1/18 Length: 10.3 inches (262mm) Wheelbase: 6.10 inches (155mm) Track Width: 4.9 inches (124mm) Height: 4.6 inches (117mm) Ground Clearance: 1.12 inches (29mm) Weight (w/o battery): 1.03lbs (468g) Approach Angle: 54° Breakover Angle: 45° Departure Angle: 48° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels: 1.0 x 0.49 inches (25.4 x 12.5mm) Tires: 2.2 x 1.0 inches (57 x 25.4mm) Motor: Brushed 180-Size 87T Differential Type: Fully Locked; 2:1 Axle Ratio Battery Tray: 50.5x31mm (LxW) Includes: (1) Traxxas TRX-4M Micro Rock Crawler with: (1) Officially Licensed ABS Hard Body (1) Titan 180 87-turn motor (1) ECM-2.5 Electronic Control Module (1) TQ transmitter (1) 7.4 volt 750mAh 2-cell LiPo battery (1) 2-amp USB fast charger with iD Tools for maintenance Needed to Complete: (4) AA Alkaline Batteries This product was added to our catalog on January 19, 2023

    Out of stock

    $149.99

  • 97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler 97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler

    Traxxas 97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler

    7 in stock

    97064-1, Traxxas TRX-4M RTR Chevrolet K10 High Trail Edition 1/18 Rock Crawler Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The lifted High Trail pickup offers over 35% more center ground clearance than a standard TRX-4M with an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality and performance you expect from Traxxas. LONG ARM LIFT KIT The High Trail edition’s Factory Installed Long Arm Lift Kit and larger tires raise the center ground clearance over 35% for a dramatic lifted stance. Revised shock mounts and extended links ensure the truck maintains its carefully-tuned suspension geometry for peak performance on challenging terrain. NEW LARGER 2.4″ TIRES Larger 2.4″ Mickey Thompson® Baja Pro™ XS replicate the full size tire’s aggressive tread pattern and fill out the High Trail Edition’s wheel wells for an authentic “lifted truck” look. Sticky compound rubber and trail-tuned foam inserts give extra “bite” for superior traction on the trail. EXTENDED WHEELBASE The High Trail Edition’s steel frame rails extend the wheelbase out to 162mm to capture the pickup’s real-world proportions perfectly. A longer wheelbase also translates into greater climbing stability and a smoother, more stable ride over rough terrain. DETAILED CLIPLESS BODY The TRX-4M Chevrolet K10 clipless body holds tight on the trail but releases in just seconds with a hidden latching system to preserve its clean lines. The tough ABS body featured molded-in color with highly detailed chrome trim for complete scale authenticity. INNOVATION K10 High Trail Edition’s Long Arm Lift Kit expands the core features and capabilities of the standard TRX-4M while maintaining its trail-bred suspension geometry. Length: 10.6 inches (269mm) Front Track: 5.0 inches (127mm) Rear Track: 5.0 inches (127mm) Center Ground Clearance: 1.57 inches (40mm) Weight (with battery): 1.03lbs (468g) Height: 5.0 inches (127mm) Wheelbase: 6.38 inches (162mm) Approach Angle: 62° Breakover Angle: 51.5° Departure Angle: 52° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Differential Type: Fully Locked; 2:1 Axle Ratio Wheels (front and rear): 1.0 x 0.49 inches (25.4 x 12.5mm) Tires (front and rear): 2.4 x 1.0 inches (61.9 x 25.6mm) Electronic Control Module: ECM-2.5™ (Combo ESC, Receiver, Lighting Control*) Motor (electric): Titan® 180 87T Chassis Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers Brake Type: Electronic “Hill Hold” Drive System: Shaft-Driven 4WD Steering: Axle-Mounted Servo Radio System: TQ™ 2.4GHz 2-Channel Transmitter Servo: #2065T Heavy Duty Waterproof Skill Level: 1 Battery Tray: 50.5mm L X 31mm W *Requires accessory Pro Scale LED Light Kit, sold separately ACCESSORIES Traxxas makes a full line of high-performance parts and detailed accessories to get the most out of your TRX-4M. Compatibility and fitment are never an issue when you buy genuine Traxxas products. This product was added to our catalog on August 21, 2023

    7 in stock

    $174.99

  • 77086-4, Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM 77086-4, Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM

    Traxxas 77086-4, Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM

    4 in stock

    77086-4, Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck w/2.4GHz TQi Radio & TSM The Traxxas X-Maxx 8S 4WD Brushless RTR Monster Truck brings the same unrelenting 4X4 power, mammoth size and award-winning innovation to the game that make X-Maxx the ultimate monster truck. When you add 30+ volts of extreme 8s power, X-Maxx 8S defies physics, unleashing jaw-dropping acceleration and 50+mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough™. Traxxas engineers tossed conventional thinking out the window to bring loyal X-Maxx owners the most powerful Traxxas Monster ever developed. X-Maxx 8s is packed with 8s rated components engineered to handle the brutal torque and incredible speed. The Torque-Biasing Center Drive unit distributes the power for maximum wheels-up punch and unrelenting acceleration. Full steel-gear driveline, larger driveshafts, larger main bearings, strengthened bulkhead, heavy-duty ring and pinion gears, dual-fan motor cooling and more make this X-Maxx the ultimate monster. X-Maxx 8S Features: 30+ Volts of Extreme 8S Power Maxx Duty Drivetrain Torque-Biasing Center Drive 50+ MPH Out of the Box Specifications: Length: 29.84 inches (758mm) Front Track: 22.26 inches (540mm) Rear Track: 20.66 inches (525mm) Ground Clearance: 4 inches (102mm) Weight: 19.1lbs (8.66kg) Height (ride): 13.79 inches (350mm) Wheelbase: 18.92 inches (480mm) Skill Level: 6 Battery Tray: 197mm x 51.5mm x 44mm Needed To Complete: (4) "AA" Batteries (for transmitter) (2) 3S or (2) 4S LiPo Battery w/Traxxas iD Connector Compatible Battery Charger This product was added to our catalog on April 12, 2021

    4 in stock

    $999.99

  • 97054-1, Traxxas TRX-4M 1/18 Scale Electric Rock Crawler w/Land Rover Defender Body 97054-1, Traxxas TRX-4M 1/18 Scale Electric Rock Crawler w/Land Rover Defender Body

    Traxxas 97054-1, Traxxas TRX-4M 1/18 Scale Electric Rock Crawler w/Land Rover Defender Body

    Out of stock

    97054-1, Traxxas TRX-4M 1/18 Scale Electric Rock Crawler w/Land Rover Defender Body The Traxxas TRX-4M 1/18 Electric Rock Crawler with Land Rover Defender Body is an adventure-driven micro crawler that can be found at your local hobby shop! The highly detailed ABS bodyshell features clipless mounting to the rigid C-channel frame. This frame is supported by four oil-filled GTM shocks to add control and keep the body from bouncing around. Scale straight axles are connected to the frame using full 4-link suspension. Adding to the performance, this truck features up to 45° steering angle to help tackle the trail ahead. Head over to your local hobby shop and inquire about the Traxxas TRX-4M Rock Crawler! While your local hobby shop will have the truck, here at AMain we have a wide array of option parts available to make your TRX-4M a fully capable crawling machine! Check out awesome screw kits, scale wheels and tires, and much more from some of your favorite brands in RC! Features: Highly detailed licensed body shell made of durable ABS Triangulated 4-link front and rear suspension Oil-filled GTM shocks Wheels and tires mounted to 7mm hex Full-time shaft-driven 4-wheel drive Low-CG Battery Tray Superior 45° steering angle Direct steering (no servo saver) Powerful Titan® 87-turn brushed motor ECM-2.5 Electronic Control Module incorporates ESC, receiver, and LED controller Fully waterproof for all-weather fun Includes transmitter, battery and charger for out of the box fun Specifications Scale: 1/18 Length: 11 inches (279mm) Wheelbase: 6.10 inches (155mm) Track Width: 4.9 inches (124mm) Height: 5.3 inches (135mm) Ground Clearance: 1.12 inches (29mm) Weight (w/o battery): 1.06lbs (483g) Approach Angle: 52° Breakover Angle: 45° Departure Angle: 41° Shock Length (front and rear): 2.0 inches (51mm) Hex Size: 7mm Wheels: 1.0 x 0.49 inches (25.4 x 12.5mm) Tires: 2.2 x 1.0 inches (57 x 25.4mm) Motor: Brushed 180-Size 87T Differential Type: Fully Locked; 2:1 Axle Ratio Battery Tray: 50.5x31mm (LxW) Includes: (1) Traxxas TRX-4M Micro Rock Crawler with: (1) Officially Licensed ABS Hard Body (1) Titan 180 87-turn motor (1) ECM-2.5 Electronic Control Module (1) TQ transmitter (1) 7.4 volt 750mAh 2-cell LiPo battery (1) 2-amp USB fast charger with iD Tools for maintenance Needed to Complete: (4) AA Alkaline Batteries This product was added to our catalog on January 19, 2023

    Out of stock

    $149.99

  • TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch

    Traxxas TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch

    9 in stock

    TRA9795, Traxxas TRX-4M Utility Trailer w/Hitch Traxxas TRX-4M Utility Trailer. This is a great option trailer to add to your Traxxas TRX-4M for all your 1/24 hauling needs. Package includes one trailer, hitch, and pre-load spacers for rear shocks.Note: This is a scale accessory intended for 1/24 remote control rock crawlers. This product was added to our catalog on January 24, 2023

    9 in stock

    $29.99

  • TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete

    Traxxas TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete

    3 in stock

    TRA9783, Traxxas TRX-4M Bronco Led Light Set Front + Rear Complete Traxxas Bronco Complete Light Kit. The Traxxas TRX-4M Bronco Pro Scale Advanced Lighting Control System adds the ultimate scale look to your Bronco. Package includes headlights, fog lights, tail light housing, two zip ties, and mounting screws. Features: Waterproof 5 Lighting Modes Single wiring harness connection to ECM-2.5 This product was added to our catalog on January 12, 2023

    3 in stock

    $24.99

  • 97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition 97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition

    Traxxas 97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition

    7 in stock

    97044-1, Traxxas TRX-4M Ford F-150 1/18-Scale 4WD Electric Truck High Trail Edition with TQ 2.4GHz Radio System This product was added to our catalog on October 27, 2023

    7 in stock

    $174.99

  • 76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger 76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger

    Traxxas 76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger

    1 in stock

    76064-5, Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck w/2.4GHz Radio, Battery & AC Charger Traxxas LaTrax Desert Prerunner 1/18 4WD RTR Short Course Truck. Taking from the features of the full sized Prerunner this small sized RC is fast, nimble and durable for extreme all-terrain use. Equipped with a powerful brushed motor, full independent suspension, oil-filled shocks and 4-wheel drive, the Latrax Prerunner is Ready to Run right out of the box. Features: ProGraphix® multi-colored painted body Off-road tires mounted on 5-spoke wheels Impact-absorbing front and rear bumpers Adjustable-height body mounts Waterproof Electronic Speed Control Powerful 370 brushed motor Includes 7.2v NiMH battery pack with iD and AC wall charger High-torque waterproof sub-micro steering servo Weather-sealed receiver box (patent pending) Full-time 4WD Front and rear all-metal gear differentials Front C-hub design with universal driveshafts Rear axle carrier with universal driveshafts Oil-filled shocks with variable mounting positions 4-wheel fully independent suspension Fiber-composite chassis Speed control and receiver are securely fastened to chassis Quick-release battery hold-down for fast battery pack changes Award-winning Traxxas support and parts availability Specifications: Length: 12.32 inches (313 mm) Front Track: 6.73 inches (171 mm) Rear Track: 6.73 inches (171 mm) Weight: 26.06 ounces (739 g) Height: 4.80 inches (122 mm) Wheelbase: 7.05 inches (179 mm) Wheel Diameter: 1.38 inches (35 mm) Shock Length (front/rear): (60 mm) Ground Clearance: .6 inches (15 mm) Front/Rear Tires: Slash Front/Rear Wheels: 5-spoke Electronic Speed Control: Waterproof forward/reverse ESC Motor: 370 brushed Transmission: 9T pinion / 61T spur Gear Ratio (internal): 2.5:1 Overall Drive Ratio: 15:1 (Stock, out-of-box) Differential Type: Hardened steel bevel (ring and pinion) Gear Pitch: 0.5 Mod. Chassis Structure/Material: Monocoque molded composite Nylon  Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: 2.4GHz radio Skill Level: 1 Battery Tray Dimensions: 102 mm x 35 mm x 18 mm Includes: (1) Blue LaTrax Desert Prerunner 1/18 4WD RTR (1) 7.2 V NiMH (1) Charger (4) AA Batteries Needed to Complete: Nothing! Everything is included in the box. This product was added to our catalog on April 10, 2021

    1 in stock

    $129.99

  • 76054-5, Traxxas LaTrax Teton 1/18 4WD RTR Monster Truck w/2.4GHz Radio, Battery & AC Charger 76054-5, Traxxas LaTrax Teton 1/18 4WD RTR Monster Truck w/2.4GHz Radio, Battery & AC Charger

    Traxxas 76054-5, Traxxas LaTrax Teton 1/18 4WD RTR Monster Truck w/2.4GHz Radio, Battery & AC Charger

    3 in stock

    76054-5, Traxxas LaTrax Teton 1/18 4WD RTR Monster Truck w/2.4GHz Radio, Battery & AC Charger The LaTrax Teton packs big all-weather adventure into a powerful 4-wheel drive off-road machine that's quick and versatile. This tough rig checks in at 1/18 scale, yet its purposeful design easily tackles rugged back-road terrain. Teton is built to go the distance, and is always ready for your next off-road adventure. The LaTrax Teton is perfect for any age driver or skill level and comes fully assembled, painted, and Ready-To-Explore™ with included 6-cell 7.2V NiMH battery pack and charger. Everything you need is included in the package. Waterproof, All-Weather Electronics  Waterproof, all-weather electronics means your fun doesn't stop just because of a little water. Teton doesn't slow down for puddles, mud, ice, or snow! It's total driving freedom! Drive the Teton where you want, when you want—the only limit is your imagination. 100% Fully Assembled and Ready-To-Explore  The 1/18 LaTrax Teton is fully assembled with a 2.4GHz radio system, painted and decaled body, and easy instructions. A LaTrax 7.2V rechargeable NiMH battery pack, AC wall outlet charger, and 4 Traxxas Power Cell AA alkaline batteries are also included. Everything you need for fun is in the box. Features: 1/18 LaTrax Teton ProGraphix® multi-colored painted body Powered by Traxxas for award-winning performance and support All-weather electronics for year round fun Four-wheel drive for superior off-road versatility and grip Powerful motor for aggressive acceleration and exciting speed Ready-To-Explore with included 6-cell 7.2V NiMH battery pack and AC wall outlet charger Fully independent suspension for exceptional off-road handling and control Smooth, Oil-filled shocks dampen the suspension motion Front and rear gear differentials Metal ring and pinion gears Simple and efficient shaft drive Durable construction that's built to last Specifications:  Length: 10.16" (258mm)  Front Track: 4.17" (106mm)  Rear Track: 4.23" (107.5mm)  Weight (with battery): 19.2oz (55g)  Weight (without battery): 13.3oz (430g)  Height (overall): 4.65" (118mm)  Wheelbase: 6.44" (163.5mm)  Electronic Speed Control: Waterproof Forward/Reverse ESC  Motor (electric): 370 Brushed  Transmission: 10T Pinion / 60T Spur  Gear Pitch: 0.5 Mod.  Radio System: 2.4GHz Radio  Skill Level: 1  Battery Tray Dimensions: 102mm x 35mm x 18mm  Included Batteries: 7.2V 6-cell NiMH with AC Wall Outlet Charger  Included Batteries: 4 "AA" (Transmitter) Needed To Complete: Nothing! Everything you need is in the box.  This product was added to our catalog or updated on April 4, 2022

    3 in stock

    $129.99

  • AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    2 in stock

    AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires. The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!  Features: Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Specifications: Height: 4.625" (117 mm) Front Track: 3.938 in (100.0mm) Width: 3.875" (98 mm) Rear Track: 3.938 in (100.0mm) Wheelbase: 5.19" (132 mm) Length: 8.75" (222 mm) Includes: (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete: Everything you need to drive is included This product was added to our catalog on April 22, 2022

    2 in stock

    $129.99

  • TRA9784, Traxxas TRX-4M Defender LED Complete Light Set

    Traxxas TRA9784, Traxxas TRX-4M Defender LED Complete Light Set

    4 in stock

    TRA9784, Traxxas TRX-4M Defender LED Complete Light Set Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. This product was added to our catalog on November 8, 2022

    4 in stock

    $24.99

  • AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward. The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter! Features: Includes radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Specifications: Approximate Assembly Time: No assembly required Batteries: 7.4V 350mAh 30C LiPo Body: Painted and trimmed Axial Deadbolt Charger: USB LiPo charger Chassis: Stamped steel rails Completion Level: Ready-To-Run Differential: Worm gear 16T/4T Drivetrain: 4WD Gear Pitch: 32-Pitch Ground Clearance: 1.06" (27mm) Height: 4.73" (120.2mm) Length: 7.8" (199.5mm) Motor Size: 180 Motor Type: Brushed Pinion: 10T Radio: AX-4 2.4GHz 2-channel Servos: AS-1 steering servo Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm) Size/Scale: 1/24 Speed Control: AE-6 ESC receiver/combo Spur Gear: 55T Suspension: Solid axle, front and rear Tire Diameter: 2.0" (51mm) Tire Tread: Nitto Trail Grappler M/T, large block tread Track: 3.9" 99.5mm) Vehicle Type: Crawler Water-Resistant: No Weight: 0.5lb (0.22kg) Wheel Diameter: 1.0" (26mm) Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl Wheel Width: 0.48" (12.4mm) Wheelbase: 5.25" (133.5mm) Width: 3.9" (99.5mm)   Includes:  (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 2-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Needed to Complete: Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! This product was added to our catalog on May 29, 2019

    1 in stock

    $109.99

  • AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger

    Axial AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger

    Out of stock

    AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger The Axial AX24 XC-1 1/24 4WD Ready to Run Mini 4WS Crawler is designed to push the limits of 1/24 RTR crawlers. The AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and a worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. With 4-Wheel Steer, there are three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl". The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists. Everyone will find it to be a highly capable mini crawler to run on indoor or outdoor courses. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. This AX24 includes everything you need to get out and start having fun! Features: Three 4-wheel steering (4WS) modes give all drivers terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. 1.0" Rockstar wheels and Rock Lizards tires produce trail-taming traction. Fully equipped — you can hit the trails almost immediately! Specifications: Scale: 1/24 Length: 7.8" (198 mm) Width: 4.5" (114 mm) Height: 3.7" (94 mm) Ground Clearance: 1.3 in (34mm) Wheelbase: 5.3" (135 mm) Drivetrain: 4WD Power Type: Electric Connector Type: PH 2.0 (High-Current Ultra Micro) Motor Type: Brushed Pinion: 11T Spur Gear: 55T Completion Level: Ready-To-Run Includes: (1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler (1) Spektrum SLT3 2.4GHz 3-Channel Radio System (4) AA Transmitter Batteries (1) Dynamite 350mAh 2S 7.4V LiPo (1) 0.5 Amp USB Charger (1) Product Manual Needed to Complete: Nothing! Everything you need to get out and have fun is in the box! This product was added to our catalog on January 27, 2023

    Out of stock

    $159.99

  • SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Axial SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Out of stock

    SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Out of stock

    $119.99

  • PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    PROTOform PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    Out of stock

    PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) The Protoform Clear Chevrolet Corvette C7 Pro-Mod Short Course Drag Car Body represents Protoforms long heritage with drag racing. This is Protoforms first body dedicated to the fast-growing SC Drag Racing class and will transform your Slash 2WD into a scale 1/4-mile beast with realistic details to give your SC drag car a super unique, race-inspired look. The C7 Pro-Mod Corvette body is a clean and convenient one piece design that allows any enthusiast to pick and apply their own unique paint scheme. Trim, mask and get creative with this slick drag body. Note: To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly. Here is the list of modifications needed to fit: Pro-Line Extended Body Mounts for Slash 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible! Traxxas® Bandit® Front Arms - TRA2531X Traxxas® Bandit® Rear Arms - TRA2750R Traxxas® Bandit® Front Caster Blocks - TRA2432 Traxxas® Bandit® Steering Blocks - TRA3636 Traxxas® Bandit® Axles - TRA2437 Traxxas® King Pins - TRA3740 Traxxas® Front Camber Turnbuckles - TRA2444 Traxxas® Rear Turnbuckles - TRA2443 Traxxas® Toe Link Turnbuckles - TRA2445 Shorten Rear Drive Shafts Remove Front Bumper Features: Modern, sleek Pro-Mod styling Incredible scale details Officially-licensed by General Motors 1-piece design Made in the USA from durable polycarbonate Specifications: Length: 25.5" (647mm) Front Width: 11.125" (282mm) Height: 11.25" (285mm) Wheelbase: 13.2" (335mm) Compatible with: Slash® 2wd Modified into a narrow Pro-Mod Drag Car  Includes:  (1) Clear Chevy® Corvette™ C7 Pro-Mod Body (1) Detailed Decal sheet Paint-then-peel over spray film & window masks This product was added to our catalog on August 28, 2021

    Out of stock

    $50.00

  • AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio Axial SCX24 Micro Size Rock Crawler, with Jeep JT Gladiator Body! The Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler, is a longer wheelbase SCX24 that is ready to hit the trail or the desk. The included Jeep JT Gladiator body depicts a scale interior, driver and detailed Tuff Stuff Overland scale accessories. Based on the proven SCX24 chassis, your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ.  For extreme crawling performance, this mini crawler has been extended 22mm to increase stability and allow a more scale fitment of the body. The axles use steel front and rear axles, steel stub axles and steel dogbones to give you peace of mind while tackling any obstacle. An 88T motor and 2S LiPo battery are used to provide precise, dependable control. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler M/T tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep JT Gladiator comes ready-to-run with radio and electronics included. Features: Factory-assembled and ready-to-run Detailed Jeep Gladiator body with scale interior, scale driver and Tuff Stuff Overland scale accessory pack Two LED lights in front bumper Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels True full-time 4-wheel drive 22mm longer wheelbase for best body fitment Durable 3-link front/4-link rear suspension for optimal crawling performance Worm drive front and rear differential gears for increased ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails Hook-and-loop body hinge for easy, tilt-open battery access Specifications: Scale: 1/24 Drive: 4WD Motor Type: Brushed Vehicle Type: Rock Crawler Includes: (1) Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RTR with: (1) Horizon 2.4GHz 2-Channel Radio System (1) Axial AS-1 Servo (1) Horizon ESC/Receiver Combo (1) Dynamite 88T Brushed Electric Motor (1) Dynamite 350mAh 2S LiPo 7.4V (1) USB Charger (4) AA Batteries for Transmitter Needed to Complete: Nothing! This truck is ready to go out of the box. This product was added to our catalog on February 3, 2022

    1 in stock

    $129.99

  • LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC

    Losi LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC

    3 in stock

    LOS03027V2, Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy w/DX3 Radio, Smart ESC & AVC The Losi TENACITY DB Pro 1/10 RTR 4WD Brushless Desert Buggy is built off the legendary TEN platform - a design known as one of the toughest available. The Losi TENACITY DB Pro Buggy is a continuation of that dominance. The TENACITY DB Pro includes a full metric hardware package and aluminum features the other guys sell as option parts. The TENACITY DB Pro desert buggy offers Spektrum Smart technology with a 130A Brushless ESC and Firma 4-Pole 3150KV 550 Motor that can achieve 50+ MPH speeds with a 3 cell LiPo battery. The ESC is waterproof, completely programmable and comes pre-wired with a high-current IC5 connector. Drivers stay in control with a Spektrum DX3 3-Channel DSMR Radio System and a Spektrum AVC receiver, while scale-to-size Falken Wildpeak MT tires and Method wheels help to achieve control at high speed. Finally, the TENACITY DB has a scale-inspired Desert Buggy body along with an updated wing and off-road buggy inspired wheel design. Features: Losi TEN 4WD Platform Spektrum Smart 130A Brushless ESC and Spektrum Firma 4-Pole 3150Kv Motor Spektrum DX3™ 3-Channel DSMR® Radio System Spektrum SR6200A DSMR 6-Channel AVC Surface Receiver Spektrum S614 Waterproof Metal Gear Surface Servo, 23T Waterproof Components 12mm Race Inspired Aluminum Bodied Shock Absorbers and Caps Race Inspired Scale Body Falken Wildpeak MT Tires Sway Bars Adjustable Turnbuckles Officially Licensed Trim Schemes from Fox Racing and Lucas Oil Front LED bar Three Silicone Filled Gear Differentials Center Differential Specifications: Product Height: 6.89" (175 mm) Product Length: 21.1" (536 mm) Product Weight: 6lb (2.72kg) Without Battery Product Width: 11.7" (297 mm) Front Track: 11.5" (292mm) Rear Track: 11.5" (292mm) Wheelbase: 13.1" (333 mm) Wheel Width: 1.63 in (41.4mm) Internal Gear Ratio: 3:89:1 Speed: 50+ Includes: (1) Losi TENACITY DB Pro 1/10-scale 4WD Buggy (1) Spektrum DX3 Smart 3-Channel DSMR Radio System (1) Spektrum SR6200A DSMR 6-Channel AVC Surface Receiver (1) Spektrum Smart 130A Brushless ESC (1) Spektrum Firma 4-Pole 3150Kv 550 Motor (1) Spektrum S614 Waterproof Metal Gear Surface Servo, 23T (1) User Manual Needed to Complete: (1) 5000mAh 2-3S LiPo Battery with IC5 Connector (1) Suitable LiPo Battery Charger This product was added to our catalog on February 9, 2022

    3 in stock

    $499.99

  • ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio

    ARRMA ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio

    2 in stock

    ARA4302V3, Arrma Granite 4X4 V3 3S BLX 1/10 RTR Brushless 4WD Monster Truck w/Spektrum SLT3 2.4GHz Radio The Arrma 1/10 Granite 4X4 V3 3S BLX Brushless 4WD Monster Truck delivers jaw-dropping power and 50+ MPH brushless performance. Precision aluminum, tough steel and composite materials come together for an easy-to-maintain, super-durable vehicle design that’s now upgraded for even greater performance and durability. The GRANITE 4X4 3S BLX RTR is DESIGNED FAST, DESIGNED TOUGH — built for exciting bashing speeds and extreme, all-terrain toughness. Features that enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout. It also now includes a Spektrum SLT3 transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control, plus an improved hand grip and trigger feel. New drivers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3 is compatible with Tactic SLT receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them. ARRMA now powers the GRANITE 4X4 3S BLX with a brushless system featuring its BLX100 ESC and the Spektrum Firma 3200Kv brushless motor. The combination provides incredible torque, acceleration and speed. The transmission and chassis are ruggedly engineered to take full advantage of the electronics’ power. It has the ingenious modular design perfected by ARRMA engineers for easy component access and maintenance. The power module, with improved dirt management, consists of the motor with ARRMA heatsink and cooling fan, plus motor plate, slipper clutch assembly and gear cover. The power module can be detached from the chassis as a complete unit by removing just one screw. With the power module removed, the slipper clutch can be reached easily for adjustments by taking out three screws that attach the gear cover. The gear ratio can be finely tuned as the power module now uses a sliding motor mesh design. A two-piece molding screwed to the truck’s chassis serves as its electronics module, containing a waterproof receiver box, servo mount and ESC tray. The SLR300 receiver mounts inside the receiver box for protection from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, allowing quick access to the on/off switch, while the servo mounts to the side. All three components can be removed together, quickly and easily. The differential module houses each differential unit in an innovative yoke design. Only eight screws need to be removed to release the front and rear yokes. The power module can then be detached, allowing you to pivot the gearbox cases for differential access. The GRANITE 4X4 3S BLX RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large gears can withstand huge torque, and internal metal gears have been chosen for reliability during extreme bashing. Its full-time 4WD transmission uses strong front, rear, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. A simple, dependable, responsive steering assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The GRANITE 4X4 3S BLX RTR includes the waterproof Spektrum SPMS651 metal-geared digital servo for 15% more torque than the previous version’s ADS-7M servo. The self-bleeding, oil-filled shocks, now with silicone O-rings, use a tried and tested, coil-over design for simple maintenance and amazing handling. Their innovative rod-end has a molded-in spring perch for extra toughness. Extended height dirt defenders and a close-fitting body limit the amount of dirt and debris that can get into the chassis tub. Front and rear bumpers offer defense against impacts. Four dBoots Fortress MT tires on gunmetal multi-spoke wheels give the GRANITE 4X4 3S BLX superb bite on a multitude of surfaces. ARRMA has also installed a wheelie bar as standard. The aggressively styled truck body looks great while bashing and even better up-close and personal, with great attention to detail on the decal and body aesthetics. Choose green or red trim schemes. Features: Stronger chassis and retained hinge pin plates Steering with more clearance for stones Castellated slipper pad and sliding gear mesh Plastic locknut for slipper 23T Spline servo saver 37T 1.35Mod diffs with silicone O-rings Power Module with sliding gear mesh and improved dirt management Rubber shielded bearings throughout Oil-filled shocks with silicone O-rings Front and rear bumpers Tough gunmetal colored multi-spoke wheels Vented multi-terrain dBoots® Fortress™ MT tires BLX100 2S/3S waterproof* ESC *For details on waterproof standards, refer to the instruction manual. IC5™ connectors (EC5™) compatible Signature easy-access modular design Easy-access power module Easy-access electronics module Easy-access diff module removal front and rear Double wishbone suspension front and rear Metal-geared differentials Extended height dirt defenders Adjustable ride height Adjustable body mounts Adjustable turnbuckles High-speed center driveshaft support Wheelie bar 2-year limited warranty (see website for details) 50+ MPH (80+ km/h) speed achievable in optimum driving conditions on 3S LiPo Specifications: Ball Bearings: Full Ball Bearing Drivetrain Battery: Sold Separately Body: Painted, decalled and trimmed Charger: Sold Separately Chassis: Molded Composite Completion Level: Ready-To-Run Differential: 2 Gear Diffs Drivetrain: 4WD Final Drive Ratio: 10.83 Front Track: 13.46 in (342mm) Power Type: Electric Gear Pitch: 0.8MOD Ground Clearance: 1.85 in (47mm) Internal Gear Ratio: 2.85 Motor Type: Brushless - Sensorless Pinion: 15T Product Height: 8.11" (206 mm) Product Length: 18.74" (476 mm) Product Weight: 6.23lbs (2826g) Product Width: 13.46" (342 mm) Radio: Included Rear Track: 13.46 in (342mm) Receiver: Included Scale: 1/10 Servos: Included Shock Type: Oil-Filled, Coil-Over Springs Speed Control: Included Spur Gear: 57T Suspension: Independent Vehicle Type: Monster Truck Water-Resistant: Yes Wheelbase: 11.3 in (287mm) Includes: (1) ARRMA® GRANITE™ 4X4 3S BLX 1/10 Scale 4WD Electric Monster Truck RTR  (1) BLX100 2S/3S Waterproof* ESC (1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor (1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter (1) Spektrum™ SLR300 Receiver (1) Spektrum™ SPMS651 Waterproof* Metal-Geared Digital Servo (1) Product Manual *NOTE: For details on waterproof standards, refer to the instruction manual. Needed to Complete: 2S LiPo or 3S Hardcase LiPo Battery Compatible Charger LiPo Safe Charging Bag (4) AA Batteries This product was added to our catalog on March 5, 2021

    2 in stock

    $329.99

  • AXI00002V3, Axial 1/24 SCX24 Jeep Wrangler JLU 4X4 Rock Crawler Brushed RTR AXI00002V3, Axial 1/24 SCX24 Jeep Wrangler JLU 4X4 Rock Crawler Brushed RTR

    Axial AXI00002V3, Axial 1/24 SCX24 Jeep Wrangler JLU 4X4 Rock Crawler Brushed RTR

    Out of stock

    AXI00002V3, Axial 1/24 SCX24 Jeep Wrangler JLU 4X4 Rock Crawler Brushed RTR This product was added to our catalog on December 10, 2023

    Out of stock

    $124.99

  • HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4)

    Hot Racing HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4)

    Out of stock

    HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4) This product was added to our catalog on December 16, 2021

    Out of stock

    $27.99

  • DYNS1217, Dynamite SCX24 Motor w/Pinion DYNS1217, Dynamite SCX24 Motor w/Pinion

    Dynamite DYNS1217, Dynamite SCX24 Motor w/Pinion

    3 in stock

    DYNS1217, Dynamite SCX24 Motor w/Pinion The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one motor with pinion and two screws. This product was added to our catalog on June 5, 2021

    3 in stock

    $9.00

  • XRA803053, HUDY 1/10 TC Carpet Tires C3-28 (4)

    XRAY XRA803053, HUDY 1/10 TC Carpet Tires C3-28 (4)

    5 in stock

    XRA803053, HUDY 1/10 TC Carpet Tires C3-28 (4) This product was added to our catalog on May 21, 2023

    5 in stock

    $36.99

  • MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th

    McAllister Racing MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th

    2 in stock

    MR326, "EL Jefe" NextGen Camaro 1/18th Little Cars for BIG FUN! The “EL Jefe” is a 1/18th scale NextGen Camaro body designed specifically for the Traxxas LaTrax Rally 1/18 4wd. We nicknamed this body "EL Jefe" aka "The Boss" because this spicy little guy will be taking command on the track, in the driveway, or across your living room!  Included with the body: Easy to follow cut lines, pre-cut decal detail sheet, pre-cut window masks, spoiler, and hardware. The last picture is how the mounts need to be set up to best suit the body. This body will require the chassis to be used in the short wheelbase to match perfectly with the wheel wells. Made in the USA with genuine .030 American Made Lexan. This product was added to our catalog on June 1, 2023

    2 in stock

    $29.99

  • KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium)

    KYOSHO KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium)

    Out of stock

    KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium) This set of Kyosho Fazer Vintage Sedan Tires is intended for use with Fazer Mk2 kits. This package includes two tires with inserts. This product was added to our catalog on March 23, 2021

    Out of stock

    $19.99

  • 92046-4, Traxxas TRX-4 1979 Ford F-150 High Trail Edition 92046-4, Traxxas TRX-4 1979 Ford F-150 High Trail Edition

    Traxxas 92046-4, Traxxas TRX-4 1979 Ford F-150 High Trail Edition

    2 in stock

    92046-4, TRX-4 1979 Ford F-150 High Trail Edition Traxxas TRX-4 High Trail RC Crawler with '79 Ford F-150 Body The Traxxas TRX-4 1/10 High Trail Edition RC Crawler with '79 Ford F-150 Ranger XLT Truck Body has been designed to offer scale performance and adventure. Thanks to its factory-installed Long Arm Lift Kit and oversize tires, the highly detailed 79 Ford F-150 Ranger XLT body stands over an inch taller than the standard TRX-4 chassis. The F-150's extended wheelbase further enhances the TRX-4’s legendary off-road capability for better performance on the trail. To further the appearance, this truck uses the Traxxas Clipless Body Mounting for added scale realism. The TRX-4 High Trail Edition is the perfect vehicle for the driver who wants it all: extreme all-terrain capability, stunning scale looks, and extreme durability. This High Trail Edition TRX-4 uses portal axles, 110mm threaded shocks and a lift kit for extreme ground clearance. Oversized Canyon Trail tires are mounted to chrome 2.2" wheels to improve both performance and ground clearance. When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain. Features: Molded Scale Detail: The 1979 Ford F-150 Ranger XLT Pickup Body comes with authentic-looking chrome wheels, side mirrors and windshield wipers. Clip-less Body Mounting System: Traditional posts and body clips are gone, and instead an integrated quick-release system secures the body invisibly. The hidden mechanism holds tight on the trail yet releases in just seconds to access the chassis. Trail-tuned XL-5 HV Waterproof Electronic Speed Control: HV electronic speed control brings 3s LiPo capability for strong efficient running. The powerful 21T Titan motor provides torque for hauling heavy loads and climbing steep grades. Factory-Installed Long Arm Lift Kit: The lift kit not only gives you an extra inch of ground clearance but also maintains the TRX-4's suspension geometry. Extended Wheelbase: The K10’s steel frame rails extend the wheelbase out to 336mm to capture the pickup’s real-world proportions perfectly. The Power of Portals: The K10’s portal axles work in tandem with the Lift Kit to lift the truck for huge center ground clearance. The portal axles’ internal gear reduction virtually eliminates torque twist, keeping the K10 straight and on course. Extended Aluminum GTS Shocks: These shocks are 20mm longer than the standard GTS shocks. The threaded shock bodies are silver-anodized to deliver silky-smooth dampening. Oversize Wheels and Tires: The aggressive Canyon Trail tires feature large lugs for increased grip with foam inserts for realistic trail performance. Slotted chrome Mag wheels come with replica locking hubs to conceal the wheel nuts. Sealed Ball Bearings: Reliable sealed ball bearings are used throughout the chassis for long-lasting performance. Specifications: Scale: 1/10 Length: 22.30inches (566mm) Track Width (Front/Rear): 10.60inches (270mm) Center Ground Clearance: 4inches (99mm) Height (Overall): 10.82inches (275mm) Wheelbase: 13.23inches (336mm) Weight (w/o Battery): 7.38lbs (3.35kg) Shock Length (Front/Rear): 4.33inches (110mm) Wheels (Front/Rear): 2.2x1.34inches (56x34mm) Tires (Front/Rear): 5.3x2.14inches (135x54mm) Approach Angle: 73.5° Departure Angle: 49.67° Breakover Angle: 67° Hex Size: 12mm Gear Pitch: 32P Battery Tray Size (LxWxH): 158.75x47x23/26mm Includes: (1) Traxxas TRX-4 1/10 High Trail Edition RC Crawler with '79 Ford F-150 Ranger XLT Body (1) TQi 2.4 GHz 4-Channel Transmitter Maintenance Tools Needed to Complete: (4) "AA" Batteries (for transmitter) (1) NiMH Battery (4-7 cell) or LiPo Battery (2S/3S) (1) Compatible Battery Charger This product was added to our catalog on March 3, 2023

    2 in stock

    $549.99

  • TRA9779, Traxxas TRX-4M Metal Axle Gears TRA9779, Traxxas TRX-4M Metal Axle Gears

    Traxxas TRA9779, Traxxas TRX-4M Metal Axle Gears

    8 in stock

    TRA9779, Traxxas TRX-4M Metal Axle Gears Traxxas Gears Axle Metal Front + Rear This product was added to our catalog on October 3, 2022

    8 in stock

    $10.00

  • HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box

    HobbyWing HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box

    Out of stock

    HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 18.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun.  Features: Compatible with sensorless brushless motors. High quality components, big current endurance. Excellent start-up, acceleration and linearity features. Plenty of programmable items, suitable for various of chassis's, tires and racing tracks. Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. Internal timing can be changed easily to make the ESC suitable for various of motors. Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software. ESC firmware can be updated through the USB adapter in the LCD Program Box. Top quality motor: Aluminum shell (case) High quality magnets Copper wires of high temperature endurance Good quality bearings ESC Specifications: Output: Continuous 18A, burst 50A. Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 6V/1A (Linear mode built-in BEC). Resistance: 0.01 Ohm. Motor Supported: Sensorless Brushless Motor. Suitable Car: 1/18 on-road sport. Cooling Fan: Not included. Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). Weight: 19g (Without wires) Motor Specifications: kV: 5200 Motor Diameter: 20mm Motor Length: 30 Shaft Diameter: 2mm Shaft Length: 10mm Weight: 46g Programmer Specifications: Size: 88x58x14mm Weight: 40g Input Weight: 4.8-6V Includes: EZRun 18A Brushless/Sensorless ESC EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor LED Program Box  Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors. This product was added to our catalog on May 4, 2023

    Out of stock

    $50.99

  • HRASXTF10H, Brass Stock Wheels hub 7mm hex SCX24

    Hot Racing HRASXTF10H, Brass Stock Wheels hub 7mm hex SCX24

    1 in stock

    HRASXTF10H, Hot Racing Axial SCX24 Brass 7mm Wheel Hex Hub (4) Hot Racing Axial SCX24 Brass 7mm Wheel Hex Hubs are a machined upgrade that adds a total of 4g weight down low for improved overall performance. Package includes four hex hubs and four axle pins. Features: CNC Machined Solid Brass construction Adds weight down low for improved performance 4g of total unsprung weight Specifications: Hex: 7mm Inner diameter: 4mm Includes: (4) Hex Wheel Hubs (4) 2 x 6mm Axle Pins This product was added to our catalog on December 16, 2021

    1 in stock

    $9.00

  • TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T) TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T)

    Traxxas TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T)

    12 in stock

    TRA9776R, Traxxas TRX-4M Low Range Transmission Gear Set (Crawl) (11T) Traxxas TRX-4M Low Range Transmission Gear Set. This optional gearset provides superb crawling speeds ideal for conquering steep and aggressive terrain. Featuring an ultra-low 40.3:1 reduction ratio this gives you maximum rock-climbing power. Traxxas offers a variety of gearsets to suit your application that can be used to customize your vehicle to your preferences. Package includes all transmission gears and an 11t pinion. Optional Gearsets: TRA9776R: 40.3:1 Reduction Ratio TRA9776: 16.6:1 Reduction Ratio TRA9776R: 9.7 Reduction Ratio This product was added to our catalog on May 24, 2023

    12 in stock

    $5.00

  • LOS03045, Losi 22S '68 Ford F100 No Prep 1/10 RTR Brushless Drag Race Truck w/Spektrum SLT3 2.4GHz Radio LOS03045, Losi 22S '68 Ford F100 No Prep 1/10 RTR Brushless Drag Race Truck w/Spektrum SLT3 2.4GHz Radio

    Losi LOS03045, Losi 22S '68 Ford F100 No Prep 1/10 RTR Brushless Drag Race Truck w/Spektrum SLT3 2.4GHz Radio

    Out of stock

    LOS03045, Losi 22S '68 Ford F100 No Prep 1/10 RTR Brushless Drag Race Truck w/Spektrum SLT3 2.4GHz Radio The Losi The Losi 22S '68 Ford F100 No Prep 1/10 RTR Brushless Drag Race Truck combines the innovative design and the quality workmanship drivers expect from Losi, in a ready to run package that makes it easy to hit the track and make fast passes. The Ford F100 has been carefully crafted to offer an authentic and scale look, while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It's designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability along with a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor.  Losi '68 Ford F100 No Prep Drag Racing BL RTR: 1/10 2WD Features: Spektrum Firma 100 amp Smart ESC Spektrum Firma 6500kv Brushless Motor Spektrum SLT3 Transmitter and Dual Protocol Receiver 22S aluminum chassis Officially Licensed 1968 Ford F100 Body Officially Licensed Mickey Thompson ET Rear Drag Tires Officially Licensed Mickey Thompson Ultra Light Front Runner Tires LED Lights All Metal Gear Transmission Elastomer Battery Straps Precisely Adjustable Wheelie Bar Aluminum Option Parts Available Specifications: Completion Level: Ready-To-Run Drivetrain: 2WD Power Type: Electric Scale: 1/10 Vehicle Type: Drag Car Motor Type: Brushless Color Variant: Black Includes: (1) Losi 68 Ford F100 Drag Truck RTR with: (1) Spektrum Firma 100 amp Smart ESC (1) Spektrum Firma 6500kv Brushless Motor (1) Spektrum SLT3 Transmitter and Dual Protocol Receiver (1) User Manual Needed to Complete: 2-3S LiPo Battery with IC5/EC5 Connector LiPo Compatible Charger Assorted tools (see manual for details) This product was added to our catalog on February 16, 2022

    Out of stock

    $199.99

  • TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2) TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2)

    Traxxas TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2)

    8 in stock

    TRA9782, Traxxas Mickey Thompson Baja Pro X 1.0" Micro Crawler Tires (2) This product was added to our catalog on October 3, 2022

    8 in stock

    $12.00

  • MXS-832103FBK, MST 501 Wheel Set (Flat Black) (4) (Offset Changeable) w/12mm Hex MXS-832103FBK, MST 501 Wheel Set (Flat Black) (4) (Offset Changeable) w/12mm Hex

    MST MXS-832103FBK, MST 501 Wheel Set (Flat Black) (4) (Offset Changeable) w/12mm Hex

    Out of stock

    MXS-832103FBK, MST 501 Wheel Set (Flat Black) (4) (Offset Changeable) w/12mm Hex MST 501 Offset Changeable Wheel Set. These wheels feature a classic webbed pattern and molded in 5 lug bolt details. The design allows you to setup the wheel with a +3, +5, +7 or +9 offset to fit a variety of bodies, and setup the stance to create the look you want on your ride. Simply clock the wheel face inside the rim and glue in place. Package includes four wheels, four serrated wheel nuts and four adhesive foam strips. Fits: MST FXX-D MST MS-01D MST RMX 2.0 S This product was added to our catalog on October 28, 2021

    Out of stock

    $20.99

  • RER03831, 1/10 Volcano EPX PRO 4WD Monster Truck Brushless RTR RER03831, 1/10 Volcano EPX PRO 4WD Monster Truck Brushless RTR

    Redcat Racing RER03831, 1/10 Volcano EPX PRO 4WD Monster Truck Brushless RTR

    Out of stock

    PRODUCT FEATURES The Redcat Volcano EPX Pro 1:10 scale RTR Monster Truck gets a makeover, with a new body, wheels and tires. Vehicle battery and charger are sold separately. Fast and powerful, the Volcano EPX Pro is ready to run (battery & charger not included) and includes a 3300KV RC540 brushless electric motor, waterproof 60A electronic speed controller (ESC), powerful 6Kg steering servo, and our proven 2.4GHz radio system. Add your own battery charger or we recommend the Hexfly 5800 MAh 7.4V LiPo battery pack and the Hexfly HX-403 LiPO balance charger are a perfect fit. The Volcano EPX pro uses a lightweight and durable molded plastic chassis with an aluminum upper brace plate for added rigidity. Low center of gravity gives the Volcano EPX Pro nimble handling while maintaining that aggressive monster truck look we all love. The Volcano EPX Pro’s rugged looking body includes hard plastic skid plates on the roof and rear spoiler. These hard plastic components not only add protection from rollovers and crashes, they also look amazing. Large white Redcat lettering rides inside each of the Volcano EPX Pro’s sporty looking 10-spoke wheels to set off the appearance of this incredible looking monster truck. The Volcano EPX Pro is fully adjustable and upgradable. A total of eight aluminum threaded body oil filled shocks are easily adjusted by twisting the spring tension collars and are completely tunable with aftermarket shock oils, pistons, and/or springs. The included dual-rate springs are designed to offer superior handling over small bumps and large jumps alike. There are also several upper and lower shock mounting positions for dialing in performance even further. Tunable metal gear sealed differentials, four wheel independent suspension, adjustable metal turnbuckles, and aggressive monster truck tires allow the driver to get loads of traction on many different surfaces while a complete set of bearings provide smooth and reliable power delivery. The adjustable metal turnbuckles allow the driver to fine tune camber and toe angle for the very best performance handling on any surface or race track. The Volcano EPX Pro monster truck is a fully tunable hobby grade RC monster truck and comes pre-tuned for most driving situations. The Volcano EPX Pro is among the best selling RTR monster trucks of all time for a reason. Not only is it exciting to drive and really fast, the Volcano EPX Pro has huge parts support with many available custom aftermarket parts, including color anodized machined aluminum parts, as well as a large selection of other performance options. The Volcano EPX Pro, with brushless power system and 2.4GHz radio, is erupting with excitement. Pull the throttle and get your adrenaline flowing with this 1:10 scale, 4WD, RTR brushless monster truck. Buy yours today! Battery and charger not included. • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout. • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle. • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout. • 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system. • Assembled & Ready to Run - Requires LiPO Battery, LiPO safe Battery charger, and 4-AA Batteries for Transmitter.

    Out of stock

    $239.99

  • 93054-4, Traxxas 4-Tec 3.0 1/10 RTR Touring Car w/Corvette Stingray Body & TQ 2.4GHz Radio System 93054-4, Traxxas 4-Tec 3.0 1/10 RTR Touring Car w/Corvette Stingray Body & TQ 2.4GHz Radio System

    Traxxas 93054-4, Traxxas 4-Tec 3.0 1/10 RTR Touring Car w/Corvette Stingray Body & TQ 2.4GHz Radio System

    Out of stock

    93054-4, Traxxas 4-Tec 3.0 1/10 RTR Touring Car w/Corvette Stingray Body & TQ 2.4GHz Radio System The Traxxas 4-Tec 3.0 1/10 RTR Touring Car delivers the spirit and excitement of the mid-engine Corvette in exacting scale detail on the larger 4-Tec 3.0 chassis. The Traxxas 4-Tec 3.0 puts supercar performance in your hands with a long-wheelbase, wide-track design. The faceted, Corvette Stingray body and its massive side intakes are duplicated to the millimeter. The simulated LT2 V8 is visible beneath the rear hatch. Authentic black-chrome wheels fill the fenders. A name synonymous with American sports car excellence, combined with Traxxas performance that demands you to drive. ULTIMATE REALISM Every detail of the Stingray is faithfully captured. Beneath the rear “glass,” the engine bay shows off a realistic recreation of the 16-valve V8. Replica wheels shine in stealthy black chrome, and wide tires fill out the rear fender wheels to match the full-size machine’s muscular stance. LARGER 4-TEC 3.0 CHASSIS The 4-Tec® 3.0 chassis features a longer wheelbase and wider track developed specifically for the Corvette Stingray. In addition to ensuring accurate proportions, the longer, wider footprint improves stability and refines handling to deliver the steering precision and balanced feel of the mid-engine ‘Vette. CLIPLESS BODY MOUNTING The Stingray’s meticulously detailed shape is unmarred by out-of-scale posts or clips. Instead, an integrated quick-release system secures the body invisibly. The hidden mechanism delivers a secure hold, and releases in seconds to provide chassis access. Specifications: Length: 19.4 inches (492mm) Front Track: 8.1 inches (204mm) Rear Track: 8.0 inches (202mm) Total Width (mirrors): 8.9 inches (227mm) Ground Clearance: 0.3 inches (9mm) Weight: 3.92lbs (1.78kg) with body (no battery) Height (ride): 5.1 inches (130mm) Wheelbase: 11.3 inches (288mm) Shock Length: Short (front and rear) Tire Diameter: 2.8 inches (73mm) Tire Width (front): 1.1 inches (28mm) Tire Width (rear): 1.3 inches (32mm) Wheel Diameter: 2.1 inches (54mm) Speed Control: XL-5™ Electronic Speed Control Motor (electric): Titan® 12T 550 (12-Turn) Transmission: Single Speed Direct Drive Overall Drive Ratio: 11.38 Differential Type: Sealed, Hardened Steel Bevel, Limited Slip Gear Pitch: 48 Chassis Structure/Material: Molded Tub / Nylon Composite Brake Type: Electronic Drive System: Shaft-Driven 4WD Steering: Dual-Bellcrank Radio System: TQ™ 2.4GHz Transmitter Servo: #2075 High Torque Waterproof Top Speed: 30+mph (with included optional pinion gear) Skill Level: 1 Battery Tray: 158mm long / 46mm wide / 23 or 26mm high Includes: 4-Tec 3.0 RTR Touring Car w/Corvette Stingray Body Titan 12 Turn 550 Motor XL-5 Electronic Speed Control TQ 2.4GHz Radio System Needed To Complete: 7.4V 2S LiPo or 7.2V 6-Cell NiMH or 8.4V 7-Cell NiMH Battery Pack Compatible Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on June 30, 2022

    Out of stock

    $249.99

  • XP-90032, Xpress Execute XQ2S 1-10 Sport 4WD Touring Car Kit (XP-90032) XP-90032, Xpress Execute XQ2S 1-10 Sport 4WD Touring Car Kit (XP-90032)

    Xpress XP-90032, Xpress Execute XQ2S 1-10 Sport 4WD Touring Car Kit (XP-90032)

    Out of stock

    XP-90032, Xpress Execute XQ2S 1-10 Sport 4WD Touring Car Kit (XP-90032) Different from other "entry" level priced touring car kits, the XQ2S has drawn it's inspiration from the race proven Execute XQ10! With adjustable suspension and steering to better prepare newcomers to the on-road touring car scene for the different type of setup changes you can make. Fitted with oil-filled dampers and gear differential, setup can be adjusted towards either backyard bashing or even winning club races! Features: Adjustable Geometry (Front Toe-in/out, Camber) Low friction belt driven 4WD system Flex Cut Lower Chassis for maximum traction Aluminum Lay-shaft for instantaneous power delivery Compatible with Execute Upgrade Parts Same suspension Geometry as the Competition Grade XQ10 New For the XQ2S: Motor mount area flex adjustment with updated flex plate Low Profile front bumper for large flexibility for mounting different bodies Improved Ball Raced Steering Rack allowing up to 32deg. of steering angle Redesigned Upper bulkhead for different camberlink lengths for roll center adjustment Improved C-Hub running 3.0mm suspension pins Inbuilt height adjustable body support in the c-hub for more consistent handling Flex Elimination Top deck, suiting for different track conditions Easy to use spring loaded battery mount, adjustable for different heights and lengths Low profile shocks for cornering stability Adjustable diff heights for different cornering reactions Reinforced Rear Hubs for higher durability, and 3.0mm suspension pins for rigidity Specifications: Wheelbase: Adjustable 254 to 258mm Width: Adjustable 185mm Includes: Xpress Execute XQ2S 1/10 Sport Touring Car Kit (1 pc) Required: Radio system (transmitter and receiver) Steering servo Motor Pinion gear Battery pack Speed controller Charger 1/10-scale bodyshell (190 mm), Wheels, tires, inserts This product was added to our catalog on August 2, 2023

    Out of stock

    $169.99

  • Traxxas Wheels 1.0" Method Race Wheels 105 2Pk Traxxas Wheels 1.0" Method Race Wheels 105 2Pk

    Traxxas Traxxas Wheels 1.0" Method Race Wheels 105 2Pk

    1 in stock

    Traxxas Wheels 1.0" Method Race Wheels 105 2Pk Traxxas Method Beadlock Rims. These Method race beadlock rims are an upgrade for your TRX-4M. Designed to work with Traxxas brass wheel weights (TRA9780) and Mickey Thompson Baja Pro X (TRA9782). Package includes two rims and hardware. This product was added to our catalog on January 12, 2023

    1 in stock

    $7.00

  • 92086-4, Traxxas TRX-4 1972 Chevrolet K5 Blazer High Trail Edition 92086-4, Traxxas TRX-4 1972 Chevrolet K5 Blazer High Trail Edition

    Traxxas 92086-4, Traxxas TRX-4 1972 Chevrolet K5 Blazer High Trail Edition

    Out of stock

    92086-4, Traxxas TRX-4 1972 Chevrolet® K5 Blazer High Trail Edition Traxxas High Trail Edition TRX-4 models are the biggest and baddest trucks on the trail and now classic Blazer fans have reason to celebrate. The 1972 Chevrolet K5 Blazer gets the full High Trail treatment with a big, lifted stance and beautifully detailed body. Features: Factory-Installed Long Arm Lift Kit Detailed licensed 1972 Chevrolet Blazer body in two colors Clipless Body Mounting TQi 2.4GHz 4-Channel Radio System High/Low Transmission T-Lock Locking Differentials This product was added to our catalog on May 17, 2023

    Out of stock

    $549.99

  • KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    KYOSHO KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    1 in stock

    KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run.  Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W         Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023

    1 in stock

    $249.99

  • CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio

    CEN Racing CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio

    Out of stock

    CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio The CEN Officially Licensed Ford F450 SD KG1 Edition 1/10 RTR Custom Truck is an exciting, unique True Scale contender to the scale truck scene. This dually truck was developed to create the look of a custom lifted truck, with the features needed to keep you rollin' for the long haul. The KG1 Edition includes officially licensed KG1 Trident D wheels, and is available in either a silver mercury with black wheels, or candy apple red with gold wheels to create the ultimate cruiser.  This truck was made dust and water proof to protect the components on any track or trail. Over heat protection and throttle signal loss prevention give you the feedback needed to not over-do a good time or lose control of your truck. A Pistol-Grip AMP 30 3 Channel Transmitter is included in this Ready to Run, featuring digital trim and a built in fail-safe to help you stay in control. CEN paid attention to the details with the components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD KG1 Edition True 1/10 Scale RTR Custom Truck   Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on December 29, 2021

    Out of stock

    $419.99

  • LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio

    Losi LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio

    Out of stock

    LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio The Losi 22S '69 Camaro No Prep 1/10 RTR Drag Race Car combines the innovative design and the quality workmanship drivers expect from Losi, in a ready to run package that makes it easy to hit the track and make fast passes. The 69 Camaro has been carefully crafted to offer an authentic and scale look, while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It's designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability, a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor. Features: Spektrum Firma 100 Amp Smart ESC Spektrum Firma 6500kv Brushless Motor Spektrum SLT3 Transmitter and Dual Protocol Receiver 22S aluminum chassis Officially Licensed 1969 Chevrolet Camaro Body Officially Licensed Summit Racing Trim Scheme (Available on the T1 version) LED Lights Mickey Thompson branded Large Rear Drag Racing Slicks Mickey Thompson branded Low Drag, Front Tires All Metal Gear Transmission Elastomer Battery Straps Full Adjustable Wheelie Bar Aluminum Option Parts Available In Depth Features: Spektrum Firma 100 Amp Smart ESC: Spektrum Firma 100A Smart ESC for surface vehicles (With Drag specific programming) is waterproof and delivers power and intelligence all-in-one. Without additional sensors or modules, they feed battery and ESC telemetry data straight to your radio in real time, all over one connection. Spektrum Firma 6500Kv Brushless Motor: The Firma 6500Kv brushless motor features a lg 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 3.175mm (1/8") output shaft, and precision bearings for high durability and smooth rotation. Preinstalled 4mm gold plated bullet connectors. SLT3 3-Channel SLT Radio System: The SLT3 is much more than an economical 3-channel radio. Together with the included SR315 receiver, it's the most affordable radio system available that offers Spektrum quality range, response, and interference resistance while also laying the groundwork to upgrade later for superior DSMR® control and Smart connectivity. Its SLT protocol is compatible with the Spektrum SPMSLR300 (SLT Protocol Receiver) and legacy Tactic receivers, such as the TR325, that are included with some ready-to-run vehicles. Spektrum SR315 Dual Protocol Receiver: The SR315 dual protocol receiver included with the SLT3 radio system not only supports the transmitter's SLT 2.4GHz technology but is also compatible with Spektrum DSMR® protocol. It's ready when you are for stepping up to next-level transmitters such as the DX5 Pro, DX5 Rugged, and DX5C. The receiver supports Spektrum Smart Technology, too — paving the way for you to enjoy Smart connectivity advantages when using it with Smart transmitters, ESCs, and batteries. Mickey Thompson ET Drag Tires: The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included. Mickey Thompson Ultra Light Front Runner Tires: Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics. 3mm Aluminum Chassis: The Drag Car Roller comes standard with a 3mm Aluminum chassis to provide accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system. Front Bumper with Adjustable Weight Placement: Fine tune the weight of the front end to keep it under control and on the ground. Precise Adjustable Wheelie Bar: The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run. Elastomer Battery Straps and Adjustable Battery Position: Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it. Oil-filled Internal limited Coil-Over Spring Shocks: These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track. Bleeder Shock Caps: Bleeder caps help you fine tune your shocks and get the perfect feel every time. Fully Adjustable Turnbuckles: For added adjustability and tune-ability, adjustable turnbuckles come standard. All Metal Gear Transmission: The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear! Sealed Gear Differential: The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want. Specifications: Scale: 1/10 Length: 25.1" (638 mm) Width: 11.08" (281 mm) Height: 6.6" (168 mm) Wheelbase: 13.1" (333 mm) Drivetrain: 2WD Power Type: Electric Motor Type: Brushless - Sensorless Gear Pitch: 48P Pinion: 16T Internal Gear Ratio: 2.43:1 Completion Level: Ready-To-Run Includes: (1) Losi 1969 Camaro Drag Car RTR (1) Spektrum Firma 100 amp Smart ESC (installed) (1) Spektrum Firma 6500kv Brushless Motor (installed) (1) Spektrum SLT3 Transmitter and Dual Protocol Receiver (installed) (1) Product Manual Needed to Complete: 2-3S LiPo Battery with IC5/EC5 Connector LiPo Compatible Charger Assorted tools (see manual for details) This product was added to our catalog on October 21, 2021

    Out of stock

    $299.99

  • 67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module 67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module

    Traxxas 67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module

    Out of stock

    67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module The Rustler 4x4 VXL Ultimate is the ultimate Heavy Duty choice for speed enthusiasts seeking robust capabilities, boasting unparalleled agility and unstoppable 4WD traction. Beneath its reinforced clipless body, the Rustler's low and broad chassis guarantees superb stability and precise maneuverability, setting the bar higher for handling prowess. Packed with both chassis and electronics updates the Rustler 4x4 is more exciting than ever! The Rustler 4x4 VXL Ultimate pre-installed Extreme Heavy Duty Upgrade Kit elevates its drivetrain and suspension to unparalleled levels of strength. Boasting reinforced components from heavy-duty suspension arms to steel wheel hubs, this upgrade kit forms the strongest driveline ever offered in a Rustler. Additionally, the clipless body mounting system ensures secure attachment and swift, single-handed removal/installation, featuring a sleek, aerodynamic design fortified by an internal rugged structure and external rollover protection. Equipped with a powerful Velineon 3500 brushless system, the Rustler Ultimate is capable of running 2S to 3S LiPo with a top speed of 60+ MPH! providing the Rustler 4x4 VXL Ultimate with all the power needed for shredding tires, doing wheelies on demand and be a robust speed weapon! Carve corners like a pro thanks to Rustler 4x4 VXL Ultimate’s adjustable sway bars and ultra-smooth, PTFE-coated aluminum GTR shocks. Rustler 4x4 VXL Ultimate’s agility and 4-wheel drive grip is further enhanced by its 2.8" Gravix tires. Pioneered on XRT, Gravix tires deliver outstanding grip on hard-packed surfaces with fast and quiet-running precision. comes fully loaded with aluminum upgrades for maximum strength and durability and they’re color-matched to the body. Brightly anodized caster and steering blocks, axle carriers, and chassis stiffener look as good as they perform and give Rustler 4x4 VXL Ultimate the brute strength required for extreme driving. A Traxxas Link Wireless Module comes standard on Rustler 4x4 VXL Ultimate along with factory-installed telemetry sensors to unlock the full potential of the TQi transmitter. Adjust the transmitter’s settings on the fly and record real-time telemetry data like speed, RPM, and battery voltage on your mobile device using the free Traxxas Link app! Features: Velineon 3500 Brushless Power System: Capable of running 2S to 3S LiPo with a top speed of 60+ MPH! Extreme Heavy Duty Upgrade Kit: Upgraded drivetrain and suspension components for ultimate strength, including HD suspension arms and steel wheel hubs Clipless Body Mounting: Secure body latching system for easy one-handed removal/installation, aerodynamic design with rugged internal structure for durability Modular Chassis: Easily perform maintenance and repairs with the Rustler 4x4's modular chassis design Ultimate Features: Anodized aluminum chassis stiffener brace CNC-machined anodized aluminum caster, steering blocks and hub carriers Extremely lightweight aluminum center driveshaft Blue anodized PTFE-coated aluminum GTR shocks with nitride coated shafts Factory installed composite body reinforcement Low CG (Center of Gravity) chassis Adjustable front and rear sway bars High speed metal gear servo All-Terrain Gravix tires on RXT wheels Specifications: Scale: 1/10 Length: 18" (457mm) Width: 12.94" (329mm) Wheelbase: 11.6" (295mm) Weight: 5.13lbs (2.33kg) Drive: 4WD Power Source: Electric Input Voltage: 6-7 cells (7.2-8.4V) NiMH 2-3S (7.4-11.1V) LiPo Gear Ratio: 12.81:1 Assembly Level: Ready To Run Includes: (1) Rustler Ultimate 1/10 4x4 Brushless RTR Stadium Truck (1) User Manual Needed to Complete: (1) 6-7 Cells NiMH or (2-3S) LiPo Battery w/iD Connector (1) Compatible Battery Charger (4) (AA) Batteries for Transmitter This product was added to our catalog on November 11, 2023

    Out of stock

    $529.99

  • TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g) TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g)

    Traxxas TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g)

    6 in stock

    TRA9780, Traxxas 1.0" Micro Brass Wheel Weights (2) (31g) This product was added to our catalog on January 30, 2023

    6 in stock

    $19.99

  • 82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor. 82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor.

    Traxxas 82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor.

    Out of stock

    82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor. Built To Perform The Traxxas TRX-4 Sport is a technical powerhouse purpose-built from the ground up to conquer any terrain. The Sport packs in all the features necessary for crawling while keeping weight as low as possible. Portal axles provide unprecedented ground clearance with the smooth damping action of aluminum GTS shocks. The lightweight body keeps the CG low for sure-footed climbing and permanently locked differentials transform the motor’s torque into unstoppable forward motion. Built Traxxas-Tough, the Sport adds a dedicated hardcore crawler to the powerful TRX-4 lineup. MODEL 82024-4: 1/10 Scale 4X4 Crawler, Fully-Assembled, Waterproof Electronics,Ready-To-Drive®, with TQ™ 2.4GHz 2-Channel Radio System, XL-5 HV Speed Control, and Painted Body

    Out of stock

    $399.95

  • TAM58683, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck

    Tamiya TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck

    1 in stock

    TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck This is a Tamiya 1/14 Tankpool24 Mercedes Actros 4WD On-Road Semi Truck, an impressive model that recreates the Mercedes Actros as raced by the Tankpool24 team in the 2019 ETRC (European Truck Racing Championship). This specific recreation depicts the truck that carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model. Features: 1/14 scale R/C model assembly kit Three-part polycarbonate body with components for body, cab and coupler Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem Includes stickers recreating the sponsors and livery Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customization potential TT-01 Type-E chassis Hop-Up Options available Includes 540-Type Brushed motor Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Adjustable Gear Ratio: Yes Bearings: Plastic bushing Body Material: Polycarbonate Body Stickers: Included Chassis Material: ABS Plastic Chassis Type: TT-01E Construction Type: Assembly Kit Differential Type: Gear Drive Type: 4WD Electronic Speed Control: Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Motor: Brushed 540 Type  Length: 441mm Width: 188mm Wheelbase: 257mm Needed to Complete:  2 channel radio system Steering servo  Polycarbonate paint for body 7.2V battery & charger This product was added to our catalog on December 16, 2021

    1 in stock

    $164.99

  • ARA2102, Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR w/SLT2 2.4GHz Radio, Battery & Charger ARA2102, Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR w/SLT2 2.4GHz Radio, Battery & Charger

    ARRMA ARA2102, Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR w/SLT2 2.4GHz Radio, Battery & Charger

    5 in stock

    ARA2102, Arrma Granite Grom MEGA 4WD 380 Brushed 1/18 Monster Truck RTR w/SLT2 2.4GHz Radio, Battery & Charger The GRANITE GROM 4X4 Monster Truck upholds the same rigorous engineering standards as its larger ARRMA RC counterparts. Additionally, it features a clipless body mount design that ensures the body remains securely attached while remaining effortlessly removable for drivers of all ages. In the realm of small-scale RC basher models, it stands out as a leader, offering a unique blend of convenience, power, strength, and exceptional handling capabilities that enable you to take your stunts to the next level. The ARRMA GRANITE GROM 4X4 Monster Truck is built to withstand any challenge you throw its way. Its impact-absorbing front and rear bumpers are ready for intense bashing, flanking a robust composite chassis. Power is efficiently transmitted through a robust 4WD drivetrain with durable metal gears, connecting the MEGA 380 brushed motor to the rugged dBoots FORTRESS monster truck wheels and tires. The Spektrum SX110 steering servo boasts waterproof construction and dependable metal gear strength. Features: Awesome monster truck styling with three rad color options fast and easy body attachment and removal mounts High strength metal gear drivetrain Fully enclosed drivetrain for tertian versatility High strength composite chassis Ballistic 4WD drive train Powerful 2S LiPo fun Waterproof 25Amp Spektrum SLT 2-in1 ESC and receiver Waterproof Spektrum SX110 metal geared servo Spektrum SLT 2-channel 2.4GHz radio Specifications: Scale: 1/18 Length: 9.84in (249.9mm) Width: 7.87in (199.8mm) Height: 4.65in (118.1mm) Wheelbase: 6.5in (165.1mm) Weight: 28.2oz (800g) Drive: 4WD Power Source: Electric Assembly Level: RTR Includes: (1) 1/18 Arrma Granite Grom (1) 7.4V 1400mAh 2S LiPo Battery with IC2 connector (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger Needed to Complete: (1) USB power adapter with QC 2.0/3.0 18W+ This product was added to our catalog on October 27, 2023

    5 in stock

    $129.99


You have seen 48 out of 822 products

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account