Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

48 Pitch Spur Gear

35 products


  • HRASTE886, Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T) HRASTE886, Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T)

    Hot Racing HRASTE886, Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T)

    10 in stock

    HRASTE886, Hot Racing Traxxas 48P Hardened Steel Spur Gear (86T) This product was added to our catalog on December 16, 2021

    10 in stock

    $19.99

  • TRA4690, Traxxas 48P Spur Gear (90T) TRA4690, Traxxas 48P Spur Gear (90T)

    Traxxas TRA4690, Traxxas 48P Spur Gear (90T)

    3 in stock

    TRA4690, Traxxas 48P Spur Gear (90T) This product was added to our catalog on April 7, 2021

    3 in stock

    $3.00

  • TRA4676, Traxxas 48P Spur Gear (76T) TRA4676, Traxxas 48P Spur Gear (76T)

    Traxxas TRA4676, Traxxas 48P Spur Gear (76T)

    Out of stock

    TRA4676, Traxxas 48P Spur Gear (76T) This product was added to our catalog on May 7, 2021

    Out of stock

    $5.00

  • TRA4683, Traxxas 48P Spur Gear (83T) TRA4683, Traxxas 48P Spur Gear (83T)

    Traxxas TRA4683, Traxxas 48P Spur Gear (83T)

    11 in stock

    TRA4683, Traxxas 48P Spur Gear (83T) This product was added to our catalog on September 7, 2021

    11 in stock

    $4.50

  • HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T) HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)

    Hot Racing HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)

    4 in stock

    HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T) Compatibility Traxxas Bandit Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Traxxas Telluride 4x4 The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm This product was added to our catalog on February 21, 2022

    4 in stock

    $19.99

  • TRA4686, Traxxas 48P Spur Gear (86T) TRA4686, Traxxas 48P Spur Gear (86T)

    Traxxas TRA4686, Traxxas 48P Spur Gear (86T)

    4 in stock

    TRA4686, Traxxas 48P Spur Gear (86T) This product was added to our catalog on September 7, 2021

    4 in stock

    $6.00

  • KIM149, Kimbrough 48P Spur Gear (90T) KIM149, Kimbrough 48P Spur Gear (90T)

    Kimbrough KIM149, Kimbrough 48P Spur Gear (90T)

    1 in stock

    KIM149, Kimbrough 48P Spur Gear (90T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    1 in stock

    $6.00

  • KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    Kimbrough KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    6 in stock

    KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    6 in stock

    $6.00

  • KIM147, Kimbrough 48P Spur Gear (84T) KIM147, Kimbrough 48P Spur Gear (84T)

    Kimbrough KIM147, Kimbrough 48P Spur Gear (84T)

    6 in stock

    KIM147, Kimbrough 48P Spur Gear (84T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    6 in stock

    $6.00

  • TRA7046R, Traxxas 48P Spur Gear (50T) TRA7046R, Traxxas 48P Spur Gear (50T)

    Traxxas TRA7046R, Traxxas 48P Spur Gear (50T)

    13 in stock

    TRA7046R, Traxxas 48P Spur Gear (50T) This product was added to our catalog on September 7, 2021

    13 in stock

    $3.00

  • ASC9654, Team Associated 48P Spur Gear (87T) ASC9654, Team Associated 48P Spur Gear (87T)

    Team Associated ASC9654, Team Associated 48P Spur Gear (87T)

    3 in stock

    ASC9654, Team Associated 48P Spur Gear (87T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2021

    3 in stock

    $6.00

  • ASC9653, Team Associated 48P Spur Gear (81T) ASC9653, Team Associated 48P Spur Gear (81T)

    Associated Electrics ASC9653, Team Associated 48P Spur Gear (81T)

    1 in stock

    ASC9653, Team Associated 48P Spur Gear (81T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2022

    1 in stock

    $6.00

  • TRA8357, Traxxas 4-Tec 2.0 48P Spur Gear (70T) TRA8357, Traxxas 4-Tec 2.0 48P Spur Gear (70T)

    Traxxas TRA8357, Traxxas 4-Tec 2.0 48P Spur Gear (70T)

    8 in stock

    TRA8357, Traxxas 4-Tec 2.0 48P Spur Gear (70T) This product was added to our catalog on May 7, 2021

    8 in stock

    $3.00

  • ASC9648, Spur Gear, 69T 48P

    Associated Electrics ASC9648, Spur Gear, 69T 48P

    2 in stock

    ASC9648, Spur Gear, 69T 48P Team Associated 48 Pitch "Brushless" Spur Gear. These spur gears are compatible with a variety of Team Associated slipper clutch equipped vehicles. Featuring a smaller design, these gears moves the motor forward for better balance and more predictable handling, and allow the use of smaller pinion gears. They allow gear ratios that are optimized for 17.5, 13.5, and 10.5 motors. Features: Smaller design for gear ratios used with 17.5, 13.5 and 10.5 brushless motors. Allows the use of smaller sized pinion gears. Moves motor forward for better balance and more predictable handling. 69T, 72T and 75T available (48 pitch).

    2 in stock

    $6.00

  • KIM150, Kimbrough 48P Spur Gear (69T) KIM150, Kimbrough 48P Spur Gear (69T)

    Kimbrough KIM150, Kimbrough 48P Spur Gear (69T)

    3 in stock

    KIM150, Kimbrough 48P Spur Gear (69T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    3 in stock

    $6.00

  • HRASTE872, Hot Racing Traxxas 48P Hardened Steel Spur Gear (72T) HRASTE872, Hot Racing Traxxas 48P Hardened Steel Spur Gear (72T)

    Hot Racing HRASTE872, Hot Racing Traxxas 48P Hardened Steel Spur Gear (72T)

    9 in stock

    HRASTE872, Hot Racing Traxxas 48P Hardened Steel Spur Gear (72T) This product was added to our catalog on December 16, 2021

    9 in stock

    $19.99

  • TRA8368, SPUR GEAR 72-TOOTH 48 PITCH

    Traxxas TRA8368, SPUR GEAR 72-TOOTH 48 PITCH

    10 in stock

    TRA8368, SPUR GEAR 72-TOOTH 48 PITCHThis product was added to our catalog on September 7, 2021

    10 in stock

    $3.00

  • KIM145, Kimbrough 48P Spur Gear (78T) KIM145, Kimbrough 48P Spur Gear (78T)

    Kimbrough KIM145, Kimbrough 48P Spur Gear (78T)

    Out of stock

    KIM145, Kimbrough 48P Spur Gear (78T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on March 19, 2021

    Out of stock

    $6.00

  • TRA8358, Traxxas 4-Tec 2.0 48P Spur Gear (55T) TRA8358, Traxxas 4-Tec 2.0 48P Spur Gear (55T)

    Traxxas TRA8358, Traxxas 4-Tec 2.0 48P Spur Gear (55T)

    6 in stock

    TRA8358, Traxxas 4-Tec 2.0 48P Spur Gear (55T) This product was added to our catalog on September 7, 2021

    6 in stock

    $3.00

  • KIM141, 93 Tooth Spur Gear 48 Pitch

    Kimbrough KIM141, 93 Tooth Spur Gear 48 Pitch

    Out of stock

    KIM141, 93 Tooth Spur Gear 48 Pitch  

    Out of stock

    $6.00

  • KIM378, 78 Tooth Spur Gear 48 Pitch

    Kimbrough KIM378, 78 Tooth Spur Gear 48 Pitch

    2 in stock

    KIM378, 78 Tooth Spur Gear 48 Pitch

    2 in stock

    $6.00

  • HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T) HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T)

    Hot Racing HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T)

    19 in stock

    HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T) The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware. NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Gear Pitch: 48 pitch Mounting Holes: 3 Tooth Face width: ~5mm This product was added to our catalog on May 16, 2021

    19 in stock

    $19.99

  • KIM164, 77 Tooth Spur Gear 48 Pitch

    Kimbrough KIM164, 77 Tooth Spur Gear 48 Pitch

    8 in stock

    KIM164, 77 Tooth Spur Gear 48 Pitch  

    8 in stock

    $6.00

  • KIM144, 75 Tooth Spur Gear 48 Pitch

    Kimbrough KIM144, 75 Tooth Spur Gear 48 Pitch

    Out of stock

    KIM144, 75 Tooth Spur Gear 48 Pitch  

    Out of stock

    $6.00

  • KIM143, 72 Tooth Spur Gear 48 Pitch

    Kimbrough KIM143, 72 Tooth Spur Gear 48 Pitch

    Out of stock

    KIM143, 72 Tooth Spur Gear 48 Pitch  

    Out of stock

    $6.00

  • KIM142, 96 Tooth Spur Gear 48 Pitch

    Kimbrough KIM142, 96 Tooth Spur Gear 48 Pitch

    Out of stock

    KIM142, 96 Tooth Spur Gear 48 Pitch  

    Out of stock

    $6.00

  • KIM387, Kimbrough 48P Traxxas Spur Gear (87T) KIM387, Kimbrough 48P Traxxas Spur Gear (87T)

    Kimbrough KIM387, Kimbrough 48P Traxxas Spur Gear (87T)

    10 in stock

    KIM387, Kimbrough 48P Traxxas Spur Gear (87T) Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on November 18, 2021

    10 in stock

    $6.00

  • ASC3924, Team Associated 48P Precision Spur Gear (66T) ASC3924, Team Associated 48P Precision Spur Gear (66T)

    Associated Electrics ASC3924, Team Associated 48P Precision Spur Gear (66T)

    6 in stock

    ASC3924, Team Associated 48P Precision Spur Gear (66T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with all Team Associated touring car and pan car models, and are available in multiple tooth count options to fine tune torque and top speed.

    6 in stock

    $6.00

  • TRA4678, SPUR GEAR 78-T 48-P W/BUSHING

    Traxxas TRA4678, SPUR GEAR 78-T 48-P W/BUSHING

    2 in stock

    TRA4678, SPUR GEAR 78-T 48-P W/BUSHINGThis product was added to our catalog on September 7, 2021

    2 in stock

    $3.00

  • TRA4684, SPUR GEAR 84-T 48-P W/ BUSHING

    Traxxas TRA4684, SPUR GEAR 84-T 48-P W/ BUSHING

    3 in stock

    TRA4684, SPUR GEAR 84-T 48-P W/ BUSHINGThis product was added to our catalog on September 7, 2021

    3 in stock

    $3.00

  • TRA4687, SPUR GEAR 87-T 48-P W/ BUSHING

    Traxxas TRA4687, SPUR GEAR 87-T 48-P W/ BUSHING

    1 in stock

    TRA4687, SPUR GEAR 87-T 48-P W/ BUSHINGThis product was added to our catalog on September 7, 2021

    1 in stock

    $3.00

  • KIM301, Kimbrough 48P Spur Gear (66T) KIM301, Kimbrough 48P Spur Gear (66T)

    Kimbrough KIM301, Kimbrough 48P Spur Gear (66T)

    7 in stock

    KIM301, Kimbrough 48P Spur Gear (66T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    7 in stock

    $6.00

  • KIM162, 74 Tooth Spur Gear 48 Pitch

    Kimbrough KIM162, 74 Tooth Spur Gear 48 Pitch

    Out of stock

    KIM162, 74 Tooth Spur Gear 48 Pitch  

    Out of stock

    $6.00

  • KIM381, Kimbrough 48P Traxxas Spur Gear (81T) KIM381, Kimbrough 48P Traxxas Spur Gear (81T)

    Kimbrough KIM381, Kimbrough 48P Traxxas Spur Gear (81T)

    6 in stock

    KIM381, Kimbrough 48P Traxxas Spur Gear (81T) Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too! Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on May 19, 2021

    6 in stock

    $6.00

  • KIM384, 84 Tooth 48 Pitch Spur Gear

    Kimbrough KIM384, 84 Tooth 48 Pitch Spur Gear

    5 in stock

    KIM384, 84 Tooth 48 Pitch Spur Gear

    5 in stock

    $6.00

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account