Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

JConcepts Replacement Body

16 products


  • JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    JConcepts JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    1 in stock

    JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    1 in stock

    $60.00

  • JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    JConcepts JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    1 in stock

    JCO0267, 1972 Chevy C10 Clear Body, requires JCO2173: SLH 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    1 in stock

    $43.00

  • JCO0222L, JConcepts Illuzion Hi Flow Lightweight Short Course Body (Clear)

    JConcepts JCO0222L, JConcepts Illuzion Hi Flow Lightweight Short Course Body (Clear)

    Out of stock

    JCO0222L, JConcepts Illuzion Hi Flow Lightweight Short Course Body (Clear) This product was added to our catalog on December 16, 2021

    Out of stock

    $43.00

  • JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    JConcepts JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    2 in stock

    JCO0418, JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) The JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body is a great way to add customization and a personalized flair to your Street Eliminator set-up. The ATS-V is Cadillac's vigorous, brawny contender, eager to represent against all other performance rides. JConcepts took on recommendations from racers and dove into a project utilizing the coupe style vehicle for the drag racing community. The Cadillac features a V-forged front-end with details chiseled into the headlight area which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recess vents. The included front hood-scoop brings a drag racing flair and blends up to the gradually shaped windshield. The roof is slightly railed, channeling the air over the rear-end and coupe section down to the trunk-lid. Fender flares protrude from the main body shape blend into the railed and splitter along the rocker-panels. The rear trunk cover fits and flows around the back to a recessed center section and allows perfect positioning of the rear taillights. The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included to bring out another side to the Cadillac which is a drag racing animal. Included in each body set, a 2019 Cadillac ATS-V decal sheet and the paint mask for all windows. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: 2019 Cadillac ATS-V faithful representation Direct fit for Team Associated DR10 Sized for an assortment of SCT length trucks with width modifications Rear trunk deck spoiler with lower support structure Decal sheet with Cadillac and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Wheelbase: 13.00" Inside Dimensions:  Front: 11.50"  Rear: 12.00” This product was added to our catalog on December 16, 2021

    2 in stock

    $60.00

  • JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear) JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear)

    JConcepts JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear)

    5 in stock

    JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear) NOTE: This body will most likely require a custom fit, or modification, to fit most short course trucks. JConcepts has adapted the iconic 1991 Ford Mustang into a street eliminator machine. The Mustang is intended for street racing and drops to popular SCT conversions and drag racing builds currently in the market. JConcepts looked to build on the street eliminator class by adding the “Fox Body” to the line-up. With past success used as a guideline, the R&D team spent time breaking down the early model Mustangs and arrived at the roughly 13” wheel base and 10.75” width. The size accommodates the trend of utilizing SCT trucks as drag racing platforms. The end result has a low-slung appearance, tight wheel well openings, hood-scoop, bobbed tail and an extended front fascia. As an addition, JConcepts has included a rear spoiler option which attaches with an under / over technique. Each package also includes a the custom window mask, 1991 generation Ford Mustang specific decal sheet and clear polycarbonate body. The product is always backed by JConcepts customer service, supported and used trackside by the JConcepts world-wide racing team and developed by professionals with style and authenticity.  Note: The lower rear spoiler support is mounted carefully to the back of the trunk using double sided tape or shoe goo (not included). The upper wing section sits down on top of the base and is attached with the same technique described above. The rear spoiler provides the look and finishing touch to the street eliminator project. Specifications | Options The Ford Mustang measures a 13" wheelbase and the inside dimensions of the body are 10.75" wide front and 11.375" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the body. The JConcepts display vehicle is fitted with and available separately, Hotties tire (JCO3193 front) and (JCO3194 rear) made specifically for the 12mm hex StarTec wheels (JCO3387B) front and rear. The Hotties are purpose built drag racing tires that look the part and available in multiple compounds to suit demanding needs. The StarTec wheels are injected molded for durability and light-weight performance and available in the stealth black color.  Features: Officially licensed by Ford to JConcepts Body measures 10.75” in width and 13” wheelbase Two-piece rear spoiler for street elimination competition Fits an assortment of SCT length trucks with width modifications Scale inspired body, cab and window design 1:1 headlight and grill treatment Clear heavy-duty polycarbonate with protective film Window masks and detailed Ford Mustang decal sheet NOTE: Complete and painted model shown for illustrative purposes only and is not included. This product was added to our catalog on August 22, 2021

    5 in stock

    $51.00

  • JCO0365, Clear Body, 1955 Chevy Bel Air Drag Eliminator JCO0365, Clear Body, 1955 Chevy Bel Air Drag Eliminator

    JConcepts JCO0365, Clear Body, 1955 Chevy Bel Air Drag Eliminator

    2 in stock

    JCO0365, 1955 Chevy Bel Air Street Eliminator Drag Racing Body (Clear) The JConcepts 1955 Chevy Bel Air Street Eliminator Drag Racing Body is a no prep replica of one of the most popular cars in the door slammer racing since. Taking on this project was not an effortless task, doing a great deal of R&D, the team went for the more race inspired style and decided to split up the design into 3 different parts. First, the main Bel Air shell has been carefully crafted via CAD and hand shaped and finish to realize the many details found on the 1955. The stunning looks, slightly modified for drag racing, create a low-profile build, racy, laid-back front grille and unmistakable front headlight section. JConcepts has designed the entire race body with the shoebox look as it was called in the 50’s. Along with the flatter straighter panels, the '55 also has modern cues like wrap-around glass on the windshield, and tail lights that jut outward. The body shell has built-in trim along the main panels which can be painted and detailed by the user to emulate the real steel. In the rear, the drop-dome roof glides toward the trunk deck which allows the 2-piece spoiler package to drop into place. Sculpted and abbreviated (race-style) bumpers are molded with the body and just like all the rest, can be painted as desired. The front hood-scoop is a separate polycarbonate piece which has a special form just to under-cut and look the size and shape as a 1:1 counterpart. Slight fender flares give the user a hint of trimming direction for the 13” wheelbase and wheel well openings. The trim lines throughout the body provide a low-profile appearance and steady guide for a clean overall look. Included in each body set, a 1955 Chevy Bel Air decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. A front hood-scoop is also part of each body set and ready for trim, fit and finishing. As always, each body set is backed with JConcepts customer support and racing heritage. The Chevy Bel Air measures a 13.00" wheelbase and the inside dimensions of the body are 11.25" wide front and 12.00" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body. NOTE: The rear wing consists of two pieces, the lower section is designed with an L-shape with support ribs which require double-sided tape (not included) to attach to the back of the trunk lid. Once base is attached, apply more double-sided tape to match locations on the top wing and drop the main wing down into place. The hood-scoop is also applied with double-sided tape and it can be applied by installing 1 small strip of tape on both sides of the scoop. To finish, flex the scoop out and drop down and press firmly against tape. Photos show body mounted on Team Associated DR10. Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Features: 1955 Chevy Bel Air drag racer faithful representation Two-piece rear wing for street elimination competition Fits an assortment of SCT length trucks with width modifications Decal sheet with Chevy, Bel Air and JConcepts badges Officially licensed by Chevrolet to JConcepts

    2 in stock

    $60.00

  • JCO0388, JConcepts RC10T6.1/YZ-2T Finnisher 1/10 Stadium Truck Body (Clear) JCO0388, JConcepts RC10T6.1/YZ-2T Finnisher 1/10 Stadium Truck Body (Clear)

    JConcepts JCO0388, JConcepts RC10T6.1/YZ-2T Finnisher 1/10 Stadium Truck Body (Clear)

    8 in stock

    JCO0388, JConcepts RC10T6.1/YZ-2T Finnisher 1/10 Stadium Truck Body (Clear) The JConcepts Clear RC10T6.1/YZ-2T Finnisher 1/10 Stadium Truck Body, a Finnisher body which drop fits on to the Team Associated T6.1 and YZ2-T racing truck, featuring pre-dimpled locations for some of the most popular models to date. The slight cab forward, raked windshield and aggressive stance highlight a performance-oriented core. A revised front hood scoop allows plenty of clearance for unique geometry while smoothing out the front down force area. Front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while the supplied decals stand-out like an 18-wheeler. This body come clear and ready for the customers own unique paint application. Like the ROAR National Champion Hi-Flow SCT body, the Finnisher body has built-in air escape passages which allow the customer to fine-tune the body for maximum outdoor performance. The latest stadium trucks can utilize shocks placed on the front or rear of the rear suspension, the JConcepts body accommodates both configurations for the utmost versatility. The updated body includes the high-performance gurney spoiler (JCO0147) which increases rear grip and balances the handling characteristics of the aggressively styled body. 1/10th stadium truck racing is back, JConcepts style.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Fits: Team Associated RC10 T6.1 Yokomo YZ-2 T Features: Original - JConcepts Finnisher design Drop-on fit for the Team Associated T6.1 | Yokomo YZ2-T Blended wing / body design Gurney spoiler #0147 included Clear polycarbonate with protective film Window masks and Finnisher decal sheet This product was added to our catalog on December 16, 2021

    8 in stock

    $32.00

  • JCO0355, JConcepts T6.1 F2 Finnisher Body (Clear) JCO0355, JConcepts T6.1 F2 Finnisher Body (Clear)

    JConcepts JCO0355, JConcepts T6.1 F2 Finnisher Body (Clear)

    7 in stock

    JCO0355, JConcepts T6.1 F2 Finnisher Body (Clear) This product was added to our catalog on December 16, 2021

    7 in stock

    $32.00

  • JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear) JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear)

    JConcepts JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear)

    2 in stock

    JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear) This clear 1978 Chevy Camaro Street Stock Dirt Oval Body by JConcepts is a great compliment to an emerging entry level class on the dirt-oval racing scene. This body shell features a fastback roofline with built-in rear spoiler, traditional V-nose and grille with perched headlights. The rear is highlighted by large format taillight and turn signal combination lamps. In addition, the large format side-windows and wrap-around rear window scream late 70’s styling cues. If you’re far enough over the hill, you might recall the days when the coolest guys in town cruised the streets in a shiny new 1978 Camaro. In those days the classic pony car sported a flowing look and set a new record for annual sales for the Chevrolet brand. Today, the Camaro is the talk of the race track with all specific wheelbase and width to fit modern 1/10th off-road chassis converted to dirt-oval bandits. The Street Stock class is fun, exciting and now, with JConcepts, even better in appearance and performance. The 1978 Camaro debuted in May of 2019 at the inaugural JConcepts Spring Dirt Oval Nationals in Omaha, Nebraska to a thrilling reception. As with all JConcepts body shells, the set includes clear body, window mask, instruction sheet and decal sheet. Officially licensed to JConcepts by Chevrolet, the classic is also built, formed and designed in the U.S.A. with professional grade artisans. The body is built for a 2wd off-road buggy wheelbase and width and requires body mounting assistance or while using the B6, the JConcepts recommend shock towers (#2716, #2717) and Team Associated T6.1 body mounts. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the body.  NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Feature: 1978 Chevy Camaro faithful representation Built-in rear spoiler for added rear down-force V-nose with perched headlights Fits an assortment of standard 1/10th buggies (with body mount applications) Decal sheet with Chevrolet, Camaro, Speed Shop and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Model: 1978 Chevy Camaro Wheelbase: 11" Inside Dimensions: Front:9.5" Rear: 9.75" Application: 2wd Off-road buggy Includes:  (1) Clear Camaro Body Window Masks Instruction Sheet Decal Sheet This product was added to our catalog on July 16, 2021

    2 in stock

    $40.00

  • JCO0476, JConcepts RC10 B6.4/B6.4D "P2" Buggy Body w/Carpet Wing (Clear) JCO0476, JConcepts RC10 B6.4/B6.4D "P2" Buggy Body w/Carpet Wing (Clear)

    JConcepts JCO0476, JConcepts RC10 B6.4/B6.4D "P2" Buggy Body w/Carpet Wing (Clear)

    7 in stock

    JCO0476, JConcepts RC10 B6.4/B6.4D "P2" Buggy Body w/Carpet Wing (Clear) The JConcepts B6.4/B6.4D "P2" Buggy Body with Carpet Wing for the Team Associated B6 vehicle is the meanest, nastiest thing out for 1/10th buggy racing. The Punisher 2 separates itself from the rest with its distinctive styling. The P2 is all about performance with riveting details including raised nose/hood, taller cab and rear-end force features. The side-pods are once again JC chamfered to provide that legendary look and the secondary window screams JConcepts styling. The cab drops off quickly and runs deep toward the rear giving plenty of drift to the newly added winglets. The tall, rear fin stabilizer acts as a vane to keep the buggy tracking in the proper direction while also maintaining a rigid roof-line even with light-weight materials. The P2 body is also available in a light weight version (JCO0476L) giving you the most weight saving possible.The Punisher 2 body is made famous by Spencer Rivkin taking the 2wd modified TQ and 1st place during the 2019 IFMAR World Championships in Trencín, Slovakia. Dakotah Phend uses the P2 body at dirt racing events winning the 2021 and 2022 ROAR National Championship with the unique body shell style. The P2, available in standard weight, and light-weight materials give users unmatched tunablity while delivering on class leading looks and swagger.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Features: Original JConcepts Punisher 2 styling Raised nose/hood with taller P2 cab Drop-in cab with rear-end winglets Tall, rear fin stabilizer for tracking performance Includes: (1) Associated B6.4/B6.4D "P2" Buggy Body (Clear) (1) Carpet Wing (Clear) This product was added to our catalog on September 27, 2022 

    7 in stock

    $35.00

  • JCO0475, JConcepts RC10 B6.4/B6.4D "F2" Body w/Carpet Wing (Clear) JCO0475, JConcepts RC10 B6.4/B6.4D "F2" Body w/Carpet Wing (Clear)

    JConcepts JCO0475, JConcepts RC10 B6.4/B6.4D "F2" Body w/Carpet Wing (Clear)

    7 in stock

    JCO0475, JConcepts RC10 B6.4/B6.4D "F2" Body w/Carpet Wing (Clear) The JConcepts B6.4/B6.4D "F2" Body with Carpet Wing uses the latest design philosophies from the team at JConcepts. Built specifically to fit the B6.4 chassis this F2 body has a lower profile cab lowering the center of gravity and looking great at the same time. Additional width has been added to the spur gear area over previous versions to make sure there are no fitment issues when using the three pad slipper assembly. Trim lines have also been updated throughout to make for a nicer fitting body with a slim front nose to fit just under the front shock tower. The rear side-pods have been simplified to allow smoother driving characteristics and more room for decal placement.NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted. Features: Updated JConcepts F2 design  Blended wing / body design  Includes two Hi-Clearance carpet or turf wing rear wings Clear polycarbonate with protective film Includes: (1) JConcepts B6.4/B6.4D "F2" Body with Carpet Wing (1) Decal sheet (1) Window masks This product was added to our catalog on Semtember 27, 2022 

    7 in stock

    $35.00

  • JCO0474, JConcepts RC10 B6.4/B6.4D "S2" Body w/Turf Wing (Clear) JCO0474, JConcepts RC10 B6.4/B6.4D "S2" Body w/Turf Wing (Clear)

    JConcepts JCO0474, JConcepts RC10 B6.4/B6.4D "S2" Body w/Turf Wing (Clear)

    8 in stock

    JCO0474, JConcepts RC10 B6.4/B6.4D "S2" Body w/Turf Wing (Clear) The JConcepts Associated B6.4/B6.4D "S2" Body with Turf Wing brings a competitive edge to the B6.4 platform. Dubbed the S2, this shell rocks some familiar features but rolled together with a low-profile stance. The S2 is a performer straight out of the package and the Aero rear wing helps deliver results on any racing circuit. Slammed overall height allows the S2 to whisk through the turns with a low center of mass while the progressive cab design provides plenty of front-end force for superior balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of the cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate 3 and 4 gear lay-down transmission layouts as well as the “dirt” 3 gear stand-up configuration, giving all out versatility. Note: This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product. Features: JConcepts original Silencer 2 styling Direct fit for B6.4 and B6.4D Aggressive, progressive cab design Channeled roof with center stabilizer Useable side-pod vents Includes two Carpet/Turf rear wings Includes JConcepts decal sheet and window mask Also available in a light weight version (JCO0474L) This product was added to our catalog on September 27,2023

    8 in stock

    $35.00

  • JCO0384, JConcepts Arrma Kraton 6S BLX Finnisher Body (Clear) JCO0384, JConcepts Arrma Kraton 6S BLX Finnisher Body (Clear)

    JConcepts JCO0384, JConcepts Arrma Kraton 6S BLX Finnisher Body (Clear)

    1 in stock

    JCO0384, JConcepts Arrma Kraton 6S BLX Finnisher Body (Clear) The JConcepts Arrma Kraton BLX Finnisher body is a great option to customize your Arrma Kraton kit. This body incorporates many design features to give it an aggressive stance with a highlight on performance. A wide front hood scoop allows plenty of clearance for the unique Kraton shock geometry, while an extended front chin spoiler, headlights and grill protect the front-end from unwanted up-drafts. A built-in air escape passage on the roof allows the customer to fine-tune the body for maximum outdoor performance. The clear polycarbonate body with protective film allows you to pick and apply your own paint design. A sheet of Finnisher decals is included. Body is sold clear and requires trimming. NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.  Features: Original - JConcepts Finnisher design Drop-on fit for the Arrma Kraton BLX Blended wing / body design  Clear polycarbonate with protective film  Window masks and Finnisher decal sheet 2016 ROAR National Champion design 2017 Dirt Nitro Challenge Champion design 2018 Dirt Nitro Challenge Champion design This product was added to our catalog on June 2, 2022

    1 in stock

    $40.00

  • JCO0454, JConcepts Axial SCX24 JCI Creep Mini Crawler Body (Clear)

    JConcepts JCO0454, JConcepts Axial SCX24 JCI Creep Mini Crawler Body (Clear)

    1 in stock

    JCO0454, JConcepts Axial SCX24 JCI Creep Mini Crawler Body (Clear)This product was added to our catalog on December 16, 2021

    1 in stock

    $28.00

  • JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear)

    JConcepts JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear)

    2 in stock

    JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear)This product was added to our catalog on December 16, 2021

    2 in stock

    $40.00

  • JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    JConcepts JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    1 in stock

    JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    1 in stock

    $60.00

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account