By Scale
CEN Racing CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio
CEN Ford F450 SD KG1 Edition 1/10 RTR Custom Dually Truck w/2.4GHz Radio The CEN Officially Licensed Ford F450 SD KG1 Edition 1/10 RTR Custom Truck is an exciting, unique True Scale contender to the scale truck scene. This dually truck was developed to create the look of a custom lifted truck, with the features needed to keep you rollin' for the long haul. The KG1 Edition includes officially licensed KG1 Trident D wheels, and is available in either a silver mercury with black wheels, or candy apple red with gold wheels to create the ultimate cruiser. This truck was made dust and water proof to protect the components on any track or trail. Over heat protection and throttle signal loss prevention give you the feedback needed to not over-do a good time or lose control of your truck. A Pistol-Grip AMP 30 3 Channel Transmitter is included in this Ready to Run, featuring digital trim and a built in fail-safe to help you stay in control. CEN paid attention to the details with the components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD KG1 Edition True 1/10 Scale RTR Custom Truck Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on December 29, 2021
$419.99
CEN Racing CEGCKR0406, Long Battery Straps (2pcs), for Colossus XT
CEGCKR0406, Long Battery Straps (2pcs), for Colossus XT
$2.99
CEN Racing CEN Racing Ford F450 1/10 4WD Solid Axle RTR Dually Truck
Ford F450 1/10 4WD Solid Axle RTR Dually Truck CEN Racing official Licensed FORD F450 SD 1/10 4WD RTR (Blue) Custom Truck DL-Series. True 1/10 scale RTR. Product Manual ESC-40A WP-1040-Brushed (Powered by HobbyWing):Water-proof and dust-proof for all weatherBuilt-In Capacitor ModuleAutomatic throttle range calibrationLow voltage cut-off protection for Li-Po (lithium polymer) and NiMH batteryOver-Heat protection and throttle signal loss protectionEasily programmed with jumpersMotor-RS-550 high Torque Motor - Power By Mabuchi MotorServo -12Kg Servo O.E.M. by Savox:4.8V 0.26 sec/60deg 10.0 kg-cm6.0V 0.23 sec/60deg 12.0 kg-cm25T Horn Gear Spline Radio System:Pistol-Grip AMP 30 3 Channel TransmitterDigital TrimmingSteering Dual-Rate (ST D/R) AdjustmentEnd Point Adjustment (EPA)Built in Failsafe Chassis:- Steel Frame Rails- CMS (Chassis Mounted Servo) Chassis Design- Stamped Steel Shock Hoops- Steel Skid Plate- Full Precision Ball Bearing Support- Adjustable Turnbuckles- High Torque Servo Horn Safer Suspension:- 3 Links Suspension with Panhard Bar Design- Big Bore Oil Filled Adjustable Coil Over Shocks- Harden Steel Steering Drag Link- 6mm Aluminum Linkage Drivetrain:Sway bar included4 Wheel DriveCenter Shaft Drive Train for more power transferred to the wheelsHighly Efficient Transmission SystemWide Range Easy Changeable Gear Box DesignSealed transmission eliminates dirt and dustSealed Axle housing5mm Hardened Steel Axle shaftDifferential Center Locker Front/Rear Planetary Gear TypeMetal Transmission GearsPlanetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 2.51 lb. 2.5kg
$419.99
Carisma CIS83168, SCA-1E 1/10 Scale '76 Ford F-150 4WD Scale Crawler, RTR (313mm Wheelbase) Black
CIS83168SCA-1E 1/10 Scale '76 Ford F-150 4WD Scale Crawler, RTR (313mm Wheelbase) Black This original American classic, has now evolved into a shorter 313mm, 2.1 Spec rig, while keeping the original scale details, along with the classic Ford F-150 pickup look. The shorter wheelbase adds to the rig's abilities when crawling and makes this American workhorse even more desirable. With the SCA-1E Gen 2 layout as standard, the Ford F-150 with the CMS Mount offers a forward weight bias, whicht combined with the shorter wheelbase, aids in crawling performance. This places the battery pack and steering servo right up front and over the front axle. The issue of torque twist (something inherent in all shaft driven rigs) has been addressed with Carisma's ATT (Anti Torque Twist Transmission), which counteracts and reduces the effects of torque twist. This is done by ensuring the front and rear center driveline spin in opposite directions and flipping the rear diff. This creates a counter rotational force in the central driveline that significantly reduces torque twist and enhances the available traction where you need it most...at the wheels. The rig runs flatter even at full throttle, and the geometry is more stable and predictable when rock crawling. Along with the LiPo friendly ARC-1 Electronic Speed Controller, it features a lowered gear ratio in the transmission (5.92:1), giving a smoother low RPM range and greater control. To compliment this it has a sealed can 17T 5 pole motor, with greater magnetic force over a 3-pole motor, thus offering enhanced torque and throttle finesse. But it's not all about crawling, the 17T motor has the ability to still produce wheel speed when required, for trail running. Being a sealed can, the motor will be more weather resistant and require minimal maintenance between runs, a must for all Scale Adventurists. Giving the fully Licensed Ford F-150 body a black finish makes the chrome of the grille, wipers, mirrors, and wheels stand out even more. This complete contrast really suits the rig, and further enhances its original 1970's look. As with the previous release, the body is also LED Ready and accepts our own or third part LED Kits (sold separately). The chrome, 1.9" true beadlock wheels allow you to add weight to each rim if you want to fine-tune the weight bias, and to complete the wheel and tire package, are the soft compound ATAT (All Terrain Adventure Tires) which offer great all round performance. The trusty Carisma CTX-8000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use, eliminating cross channel interference and offering precise and responsive control at all times. It also includes a 1400mah NiMH battery and 5V USB charger to get you started on your adventure. In addition the ARC-1 ESC is also LiPO friendly, offering owners a clear future upgrade path. Features: CMS Mount For Improved Weight Bias ATT (Anti Torque Twist) Transmission Lower 14/83 (5.92:1) Gear Ratio 5 Pole 17T Brushed Crawler Motor LiPo Safe ARC-1 ESC with Crawler Mode Front CVD's & Robust Steel Driveline Specifications: Wheelbase: 313mm Length: 480mm Width: 230mm Clearance: 75mm
$359.99
CEN Racing CEG8992, CEN Ford F250 SD KG1 Lift Edition 1/10 RTR Custom Truck (Daytona Blue) w/2.4GHz Radio
CEG8992, CEN Ford F250 SD KG1 Lift Edition 1/10 RTR Custom Truck (Daytona Blue) w/2.4GHz Radio The CEN Ford F250 SD KG1 Lift Edition 1/10 RTR Custom Truck brings the same incredible custom looks as offered with it's F450 big brother but with a fresh updated look. Featuring a true to scale F250 quad cab body, detailed side view mirrors, custom front and rear bumpers and a massive suspension lift it is hard to deny how awesome this truck looks! Adding to the custom truck theme is an RGB LED light positioned under the fenders. This light is selectable from the transmitter and gives you a multitude of color options showing off the impressive suspension. Supporting the F250 are two stout straight axles each located with four aluminum main links and a unique Watts link style pivoting axle mount. The Watts link takes the place of a typical panhard bar and keeps the axle centered throughout the suspension travel thus keeping any unwanted tire rubbing from happening. Finishing off the axles are a matching pair of front and rear sway bars keeping the truck level in heavy duty conditions. Powering this beast is a high torque 540 brushed motor and Hobbywing SC-40A WP-1040 ESC giving you the power and control needed to take this truck to the extremes. CEN paid attention to the details with the drivetrain components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Available in either a Burnt Copper body with black chrome wheels or a Daytona Blue body with chrome wheels gives you the ability to choose your own unique look. The CEN Ford F250 SD KG1 Lift Edition has the custom design you are looking for and is ready for the ultimate scale adventure! Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Watts Link Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link 6mm Aluminum Linkage Sway bar included Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 25.60inch (650mm) Width: 10.04inch (255mm) Wheelbase: 16.02inch (407mm) Ground Clearance: 3.54inch (90mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F250 SD KG1 Lift Edition 1/10 Scale RTR Custom Truck Needed To Complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on September 30, 2022
$469.99
CEN Racing CEGCKD0450, KAOS Aluminum Tow Hitch w/ 5.8mm Pivot Ball Bolt, Ford F450 SD
CEGCKD0450, KAOS Aluminum Tow Hitch w/ 5.8mm Pivot Ball Bolt, Ford F450 SD
$29.99
Traxxas 98044-1, Traxxas TRX-4MT Ford F-150 1/18 Scale 4X4 Monster Truck
98044-1, Traxxas TRX-4MT Ford F-150 1/18 Scale 4X4 Monster Truck Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Ford F-150 body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size. MODEL 98044-1: TRX-4MT with Ford F-150 pickup body: 1/18 scale 4X4 monster truck, fully-assembled, Ready-To-Drive, with TQ 2.4 GHz 2-channel transmitter, and ECM-2.5 waterproof electronics. This product was added to our catalog on May 1, 2024
$199.99
CEN Racing CEGCKD0455, CEN Two Way Adjustable Aluminum Tow Hitch
CEN Two Way Adjustable Aluminum Tow Hitch
$32.00
CEN Racing Ford F450 American Force Wheel and Fury Tire 1/10 4WD RTR Custom Truck DL- Series
Ford F450 American Force Wheel and Fury Tire 1/10 4WD RTR Custom Truck DL- Series The CEN Ford F450 SD V2 1/10 RTR Custom Dually Truck features custom updates to this already unique scale truck. When first released the CEN Ford F450 quickly became a cult classic, sparking scale inspired builds and custom options. The V2 takes the same features that created this icon and adds a custom touch. The most noticeable are the updated body colors; Blue Galaxy(CEG8984) and Grey Titanium(CEG8985). Adding to this look are the chrome wheels and links offered with the Blue Galaxy model and the Gold wheels and links offered on the Grey Titanium model. This creates a custom look further setting the CEN Ford F450 apart from the competition. With a stout and durable drivetrain the CEN F450 offers the same proven performance you would expect from a heavy duty truck. Using scale steel frame rails as a base for the 3 link suspension this truck features 4wd drivetrain offering an abundance of traction with the rear axle having four tires digging for grip. Powering this drivetrain is a large 550 size brushed motor and Hobbywing 40A WP-1040 ESC. Steering is handled by a high torque Savox servo and an AMP 30 3-Channel transmitter providing precise steering and throttle control. Packed full of features out of the box and topped off with custom looks that no other truck offers it is easy to see why the CEN Ford F450 is so popular! Features: SC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather Built-In Capacitor Module Automatic throttle range calibration Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery Over-Heat protection and throttle signal loss protection Easily programmed with jumpers Motor-RS-550 high Torque Motor (Power By Mabuchi Motor) Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm 6.0V 0.23 sec/60deg 12.0 kg-cm 25T Horn Gear Spline Radio System: Pistol-Grip AMP 30 3 Channel Transmitter Digital Trimming Steering Dual-Rate (ST D/R) Adjustment End Point Adjustment (EPA) Built in Fail-safe Chassis: Steel Frame Rails CMS (Chassis Mounted Servo) Chassis Design Stamped Steel Shock Hoops Steel Skid Plate Full Precision Ball Bearing Support Adjustable Turnbuckles High Torque Servo Horn Safer Suspension: 3 Links Suspension with Panhard Bar Design Big Bore Oil Filled Adjustable Coil Over Shocks Harden Steel Steering Drag Link Sway bar included 6mm Aluminum Linkage Drivetrain: 4 Wheel Drive Center Shaft Drive Train for more power transferred to the wheels Highly Efficient Transmission System Wide Range Easy Changeable Gear Box Design Sealed transmission eliminates dirt and dust Sealed Axle housing 5mm Hardened Steel Axle shaft Differential Center Locker Front/Rear Planetary Gear Type Metal Transmission Gears Planetary Gear type Differential Specifications: Length: 26.70inch (678.18mm) Width: 11.41inch (290mm) Wheelbase: 17.60inch (447mm) Ground Clearance: 2.52inch (64mm) Weight: 5.51 lb. (2.5kg) Battery: 2s Lipo recommended Includes: (1) Ford F450 SD V2 1/10 RTR Custom Dually Truck Needed to complete: 2S Lipo w/T-Style Connector Battery Charger (4) "AA" Batteries for Transmitter This product was added to our catalog on August 1, 2022
$419.99
CEN Racing CEGCKD1000, KAOS F450 SD Custom Truck Lift Conversion Kit
KAOS F450 SD Custom Truck Lift Conversion Kit CKD1000 KAOS F450 SD Custom Truck Lift Conversion kit. This is a full lift kit and includes everything you need to take your F450 SD to the next level. Whether you want to tackle new terrain, or just stand out above the rest, this lift kit is what you need. Features: Full lift kit for F450 SD only Includes 110mm full aluminum shock sets Watt design links for prefect geometry Item First Received: 12/13/2022
$149.00
Carisma CIS86568, Carisma SCA-1E 2.1 Spec Toyota Tacoma TRD Pro 1/10th RTR
CIS86568, Carisma SCA-1E 2.1 Spec Toyota Tacoma TRD Pro 1/10th RTR Carisma's most successful rig ever has evolved, and they've kept the affordable price point, making it one of the best value rigs on the market. Officially Licensed TOYOTA TACOMA TRD Pro Body With Hard Body realism, and the weight advantage of polycarbonate, this is no ordinary shell! It's a multi-part body with added injection molded scale detail. LED lights are pre-fitted at the factory, and will allow users to illuminate their way on rocks or trails (or even urban environments).The rig also comes with unique TRD Pro, True Beadlock Wheels, ensuring that the 95mm Ultra Realistic ATSS tires stay firmly on the rims. Upgrades & Enhancements The Gen 2 layout, with CMS Mount and forward mounted battery, offers a forward weight bias to aid crawling, making it ready for action! The issue of torque twist, something inherent in all shaft driven rigs, has been addressed with the ATT (Anti Torque Twist Transmission) which counteracts and reduces the effects of torque twist by rotating the front and rear center drivelines in opposite directions. This creates a counter rotational force in the central driveline that significantly reduces twist and enhances traction when you need it most. The rig runs flatter even at full throttle, and the geometry is more stable and predictable when rock crawling Increased Control & Torque This rig comes with the fully programmable ARC-2 Electronic Speed Controller as standard. Fine-tune any one of 21 Programmable Performance Parameters (including PWM Frequency) with the included, (and easy to use) MPG-1 programmer. Truly class leading electronics at an affordable price. Alongside the LiPo friendly ARC-2 Electronic Speed Controller, the gear ratio has been lowered to 5.92:1, giving a smoother low RPM range and greater control. The CSA 5-Pole Motor generates immense torque and low RPM throttle finesse, which is essential for exploration, trail running and rock crawling. When matched with the ARC-2 ESC, this offers a formidable combination of control and power. Tried & Trusted Electronics Carisma's CTX-2000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use, eliminating cross channel interference and offering precise and responsive control at all times. With a unique 1-2-3 Throttle Profile Switch, it allows users of all abilities to have complete control of the rig. From seasoned OG RC enthusiasts, to complete RC newbie, Carisma has you covered. Also included is a 1400mah NiMH battery and safe 5V USB Charger to get you started on your adventure, although the ARC-2 ESC is also LiPO friendly, offering you a clear future upgrade path. Dimensions: Wheelbase: 313mm Length: 510mm Width: 210mm Clearance: 75mm Features: Officially Licensed TOYOTA TACOMA TRD Pro Body LED Lights are pre-fitted at the factory 5-Pole Motor generates immense Torque and low RPM Throttle Finesse 9kg High Torque Metal Geared Servo ATT (Anti Torque Twist) Transmission Low 14,83 (5.92:1) Gear Ratio This product was added to our catalog on September 10, 2022
$399.99
CEN Racing CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR
CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR RGB LED Light: Standard Under Fender Multicolor RGB LED. ESC: 40A WP-1040-Brushed (By HobbyWing) Water-Proof and Dust-Proof for All Weather. Built-In Capacitor Module. Automatic Throttle Range Calibration. Low Voltage Cut-Off Protection for Li-Po and NiMH Battery. Over-Heat Protection and Throttle Signal Loss Protection. Motor: RS-540 High Torque Brushed Motor. Servo: 12Kg Metal Gear Servo (By Savox) 4.8V - 0.26 sec/60 10.0 kg-cm. 6.0V - 0.23 sec/60 12.0 kg-cm. 25T Horn Gear Spline. Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter and Receiver Digital Trimming. Steering Dual-Rate (ST D/R) Adjustment. End Point Adjustment (EPA). Build in Failsafe. Frequencies: 2.4GHz Power Supply: 4 AA Alkaline (Not Included). Body: Official Licensed by Ford Motor F-250 Super Duty. Scale Realistic Body Details. Black Bed Liner Coating. hard Molded Front & Rear bumpers with build in 3mm LED housing Chassis: Steel Frame Rails. CMS (Chassis Mounted Servo) Chassis Design. Stamped Steel Shock Hoops. Steel Skid Plate. Full Precision Ball Bearing Supported. Adjustable Turnbuckles. High Torque Servo Saver Horn. Easy Access Battery Tray. Battery Tray Size 146 x 50 x 25mm. Suspension: Custom Lifted Suspension Design. 110mm Big Bore Oil Filled Adjustable Coil Over Shocks. 12mm over size shock body with 3mm Hardened Steel Polished Shaft. Harden Steel Steering Drag Link. CNC Machined 6mm Aluminum Linkage. Front / Rear Sway Bar. Drivetrain: Full Metal Transmission Gears. 4 Wheels Drive. Center Shaft Drivetrain for More Power Transferred to the Wheels. Hight Efficient Transmission System. Wide Range Easy Changeable Gear Box Design. Sealed Transmission Case. Sealed Axle Housing. Metal Planetary Gear Type Differential. Gear Ratio: Hi / Speed Ratio 1.56:1 Hi / Torque Ratio 2.8:1 Spur / Pinion Gear 32p85/32p12T Ring & Pinion Gear30/15T 2:1 Wheel: Official Licensed by KG1 Forged KF004 Vile Wheel. 66.50mm x 37.5mm. Tires: Official Licensed Fury Tires Low Profile Country Hunter tires. 65 x 100.50 x 38.50 mm. Specifications: Length: 25.6 inches (650mm) Width: 10.04 inches (255mm) Wheelbase: 16.02 inches (407mm) Ground Clearance: 3.54inch (90mm) Weight: 5.51 lb. 2.5 kg Recommended Battery: 2S 5000mAh LiPo Battery with dean connector
$469.99
Carisma CIS78068, SCA-1E 1/10 Scale Prairie Wolf RTR
SCA-1E 1/10 Scale Prairie Wolf RTR The call of the wild, the need to explore and to discover new locations, to respect and being at one with nature, leads more and more people to go 'Off Grid' to escape the urban 9-5 lifestyle. For those people, Carisma Scale Adventure offers the opportunity to do so in 1/10th scale.Carisma's 'Prairie Wolf' LWB Adventure Van exudes 'Off Road Adventure'. With scale details like a LED-Ready Grille, robust wing mirrors, and a rear panel roof access ladder, the body looks the part straight from the box, but still has enough scope for additional detailing. Add a roof rack, luggage, spare wheels & tires, or any other scale accessories you'd like. The possibilities are truly limitless.Vacuum formed in a thicker than standard polycarbonate for additional rigidity, the body comes pre-painted and adorned with a retro Off Road inspired livery. The 324mm wheelbase rig meets 2.1 Spec and including the CMS Mount, offering a forward weight bias, which when combined with the ATT Transmission and 95mm AT-SS soft compound tires improves rock crawling ability. Carisma also addressed the issue of torque twist with their ATT (Anti Torque Twist Transmission), neutralizing twist and keeping the wheels firmly planted (and generating grip).The trusty Carisma CTX-8000 2.4GHz radio system is supplied with the RTR rig. Featuring Steering Rate adjustment, Steering and Throttle Trims, Channel Reversing, End Point Adjustment and F.H.S.S (Frequency Hopping Spread Spectrum) Technology for glitch free use. Carisma also includes a 1400mah NiMH battery and 5V USB Charger to get you started on your adventure. The ARC-1 ESC is LiPO friendly, offering owners a clear future upgrade path. Carisma has also lowered the gear ratio in the transmission to 5.92:1, giving a smoother low RPM range and greater finesse and control. To compliment this they have introduced a new Sealed Can 17T 5 Pole Motor, with greater magnetic force over a 3-pole motor, thus offering a balance between RPM and torque. Being a sealed can, the motor will be more weather resistant and require minimal maintenance between runs.
$359.99
CEN Racing CEGCD0210, CEN F250 Center Drive Shaft (160.45mm)
CEN F250 Center Drive Shaft. This is a replacement center drive shaft intended for the CEN Ford F250 truck. Package includes one 160.45mm long center driveshaft.
$9.99
CEN Racing CEGCKD0801, Pro RGB Light Conversion Kit for F450 Chasiss w/Pro Module
CEGCKD0801, Pro RGB Light Conversion Kit for F450 Chasiss w/Pro Module Pro RGB Light Conversion Kit for F450 Chassis w/Pro Module CKD0801 KAOS RGB Light Conversion kit for F450 SD (F450 Chassis only w/ control Module) This is Standard RGB kit for F450 SD Including all the mounting wares Include RGB MODULE which controls multi color changes
$69.00
Carisma CIS86368, Carisma SCA-1E 1/10 Scale 70s Ford F-150 2.1 Spec 4WD RTR Scale Truck (Black)
CIS86368, Carisma SCA-1E 1/10 Scale 70s Ford F-150 2.1 Spec 4WD RTR Scale Truck (Black) Now with 2.1 Spec as standard. New Retro Livery, and a one piece 313mm wheelbase body. This will be the last of this model as a RTR, and is sure to become a very sought after rig. Grab a piece of American Automotive History today and hit the Trails and Rocks with one of our most capable rigs.This LWB, 2.1 Spec Rig offers CMS (Chassis Mounted Servo), 1.9 true Beadlock 1.9 wheels and soft compound AT-AT tyres. The fully Licensed 70's Ford F-150 body includes chromed injection moulded details and LED ready light buckets. With 2.4GHz FHSS 2-Channel Radio Gear, a 9kg Metal Geared Steering Servo, NiMH Battery and safe USB Charger included it's a complete 'Ready To Run' rig, in every sense of the word! Features: New retro livery Pre-built and fully painted One piece 313mm WB body Chassis mounted servo 1.9" true beadlock wheels Soft compound AT-AT tires Fully licensed 70's Ford F-150 body Chromed injection molded details LED ready light buckets 2.4GHz FHSS 2-channel radio 9kg metal geared steering servo This product was added to our catalog on February 10, 2023
$359.99
CEN Racing CEGG36311A, CEN 3x10mm Button Head Screw (10)
This is a replacement set of ten CEN 3x10mm Button Head Screws, intended for use with the CEN Ford F450 SD scale truck. COMPATIBILITY CEN Ford B50 CEN Ford F450 CEN Reepe
$3.00
CEN Racing CEGCKD0350, CEN F450 Aluminum Differential Cover (Red)
CEN Racing F450 Aluminum Differential Cover. This optional differential cover is made from aluminum and anodized red to add style to the CEN Racing F450. Package includes one differential cover and hardware. This product was added to our catalog on October 11, 2021
$26.99
CEN Racing CEGCD0103, CEN F450 Shock Spring (Matte Silver) (2)
This is a replacement set of two CEN F450 SD Matte Silver Shock Springs, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2021
$6.00
CEN Racing CEGCQ0218, CEN F450 Wheel Hex Set
This is a replacement CEN F450 SD Wheel Hex set, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2021
$6.00
Revell Monogram RMX854418, 1/24 Ford GT Racing LeMans
RMX854418, 1/24 Ford GT Racing LeMans
$29.95
Carisma CIS85968, MSA-1MT 2.0 Spec Coyote 4WD 1/24 RTR with Battery & Charger
CIS85968, MSA-1MT 2.0 Spec Coyote 4WD 1/24 RTR with Battery & Charger The 2.0 Spec vehicles have been equipped with a new, faster MT Spec Carisma Motor, offering double the power of their existing power plant in both wheel speed and torque. They've also redesigned the ESC software to offer a more traditional, bashing orientated; Forward, Reverse and Brake profile. But that's not all, they've also changed the gearing to work in harmony with the MT Spec's electronics to create what they feel is the ultimate 1/24th Micro Monster Truck. This product was added to our catalog on February 10, 2024
$139.99
CEN Racing CEGCD0910, CEN Ford F-250 Complete Body Set (Clear) w/Headlight Bracket
CEGCD0910, CEN Ford F-250 Complete Body Set (Clear) w/Headlight Bracket CEN Ford F-250 Complete Clear Body Set with Headlight Bracket. This is an optional clear body set intended for the CEN Ford F-250. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.Includes: (1) F-250 Clear Lexan Cab (1) F-250 Clear Lexan Bed (1) F-250 Clear Lexan Light Buckets (3) Decal Sheets Molded Plastic Scale Accessories with Mounting Hardware This product was added to our catalog on January 10, 2023
$108.00
CEN Racing CEGG36401, CEN Ford F450 SD M3 Nylon Locknuts (10)
CEGG36401, CEN Ford F450 SD M3 Nylon Locknuts (10) This is a pack of ten CEN M3 Nylon Locknuts, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2022
$2.50
CEN Racing CEGCD0424, CEN F250 Servo Saver Set (25T)
CEN F250 Servo Saver Set. This is a replacement servo saver set intended for the CEN Ford F250 truck. Package includes one servo saver top, one servo saver bottom with a 25T spline and one extended servo saver arm.
$7.00
CEN Racing CEGCQ0157, CEN F450 Sway Bar Main Shaft (2)
This is a replacement set of two CEN F450 SD Sway Bar Main Shafts, intended for use with the CEN Ford F450 SD scale truck. COMPATIBILITY CEN Ford B50 CEN Ford F450
$8.00
CEN Racing CEGCD0151, CEN F450 Sway Bar Mount
This is a replacement CEN F450 SD Sway Bar Mount, intended for use with the CEN Ford F450 SD scale truck. Package includes left and right side sway bar mount brackets.
$6.00
CEN Racing CEGCQ0155, CEN F450 1.8mm Tension Bar (4)
This is a replacement pack of four CEN F450 SD 1.8mm Tension Bars, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 15, 2021
$3.50
CEN Racing CEGG36267, CEN F450 King Pin (6)
This is a replacement pack of six CEN F450 SD King Pins, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on March 4, 2021
$3.00
CEN Racing CEGCQ0206, CEN F450 Outdrive Cup
This is a replacement CEN F450 SD Outdrive Cup, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 15, 202
$8.00
Revell Monogram RMX852596, 1/24 70 Dodge Challenger 2N1
RMX852596, 1/24 70 Dodge Challenger 2N1
$29.95
CEN Racing CEGG73301, CEN F450 32P Spur Gear (56T)
CEGG73301, CEN F450 32P Spur Gear (56T) This is a replacement CEN F450 32 Pitch 56 Tooth Spur Gear, intended for use with the CEN Ford F450 SD scale truck. This product was added to our catalog on February 7, 2024
$5.00
CEN Racing CEGCQ0821, CQ0821 Savox RTR-08 Servo (12KG)
CEGCQ0821, CQ0821 Savox RTR-08 Servo (12KG) This product was added to our catalog on November 7, 2023
$30.00
CEN Racing CEGCQ0311, CEN Turnbuckle M3 X 30mm, for the Q & MT Series (1pc)
CEGCQ0311, CEN Turnbuckle M3 X 30mm, for the Q & MT Series (1pc)
$3.50
CEN Racing CEGCQ0303, C-Hub A, B, for the Q & MT Series
C-Hub A, B, for the Q & MT Series
$8.00
CEN Racing CEGCQ0331, 5.8mm Flanged Pivot Balls, for the Q & MT Series (16pcs)
5.8mm Flanged Pivot Balls, for the Q & MT Series (16pcs)
$6.00
CEN Racing CEGCQ0302, Steering Knuckle, for the Q & MT Series (2pcs)
Steering Knuckle, for the Q & MT Series (2pcs)
$9.00
CEN Racing CEGCD0412, CEN F450 3rd Link & Panhard Mount
This is a replacement set of CEN F450 SD 3rd Link and Panhard Mount set, intended for use with the CEN Ford F450 SD scale truck.
$15.00
CEN Racing CEGCQ0306, Solid Axle Housing Cover, Front or Rear, for the Q & MT Series
Solid Axle Housing Cover, Front or Rear, for the Q & MT Series
$13.00
CEN Racing CEGCQ0801, CEN 40 Amp Waterproof Brushed Hobbywing ESC
CEGCQ0801, CEN 40 Amp Waterproof Brushed Hobbywing ESC CEN Racing 40 Amp Waterproof Brushed Hobbywing ESC. This WP-1040 ESC is designed and produced by Hobbywing for the CEN Racing Fiat Abarth, Ford B50, Ford F450 and Suzuki Jimny models. Featuring a power switch, standard brushed motor connectors and a pre-soldered T-style connector. Package includes one brushed ESC. This product was added to our catalog on October 14, 2021
$40.00
CEN Racing CEGCKR0404, CEN Aluminum Servo Horn
CEN 2Aluminum Servo Horn. Package includes replacement servo horn for the CEN Reeper and Colossus XT monster trucks. COMPATIBILITY CEN Reeper
$12.49
CEN Racing CEGG36706, CEN F450 2x8mm Pin (6)
This is a replacement pack of six CEN F450 2x8mm Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck. COMPATIBILITY CEN Fiat Abarth CEN Ford B50 CEN Ford F450 CEN Suzuki Jimny
$3.00
CEN Racing CEGCQ0213, CEN F450 2nd Gear Shaft
This is a replacement CEN F450 SD 2nd Gear Shaft, intended for use with the CEN Ford F450 SD scale truck. COMPATIBILITY CEN Fiat Abarth CEN Ford B50 CEN Ford F450 CEN Suzuki Jimn
$4.50
CEN Racing CEGGS517, CEN Lower Suspension Arm
CEN Lower Suspension Arm. Package includes replacement suspension arm for the CEN Reeper and Colossus XT monster trucks. This suspension arm can be used in the front or rear position, on both the left and right side of the chassis. COMPATIBILITY CEN Reeper
$4.99
CEN Racing CEGGS248, CEN Upper Suspension Arm
CEN Upper Suspension Arm. Package includes replacement upper suspension arm for the CEN Reeper monster truck. COMPATIBILITY CEN Reeper
$4.99
CEN Racing CEGCQ0317, CEN F450 Steering Drag Link
This is a replacement CEN F450 SD Steering Drag Link, intended for use with the CEN Ford F450 SD scale truck.
$5.00
CEN Racing CEGCD0408, CEN F450 Metal Skid Plate
This is a replacement CEN F450 SD Metal Skid Plate, intended for use with the CEN Ford F450 SD scale truck.
$18.00
CEN Racing CEGCQ0410, CEN F450 Receiver Box
This is a replacement CEN F450 SD Receiver Box, intended for use with the CEN Ford F450 SD scale truck
$12.00
You have seen 48 out of 93 products