APD F-SERIES 120F3[X] V2 X-Class 12S 120A ESC

  • VendorRaceDayQuads

Description

RDQ is proud to be the official APD USA Distributor!

The improved F_Series 120F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 120F3[X]v2 ESCs are drop-in replaceable to 120F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetization, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 9 kW.

The 120F3[X] V2 is designed to withstand the extreme demands of X-Class motor and prop combinations, where high inertia and fast spool-up/spool-down rates normally cause issues.

Note: The V2 has all the same features as the V1. 

Check out our ESC selection and all our APD X-Class Electronics!

Features

  • Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.  (V2)
  • Configuration of drive parameters, signal types and fault handling (V2)
  • Bi-Directional DShot for RPM Filtering support (V2)
  • On board bootloader (V2)
  • Passthrough firmware updating and configuration (V2)
  • Additional Telemetry types: PWM Telemetry and RPM Output (V2)
  • High-speed telemetry rates when operating DShot and ProShot (V2)
  • Reversible operation support (full forwards to full reverse) (V2)
  • Dynamic signal quality checks across supported input protocols (V2)
  • Hardware protection for UART programming pins (V2)
  • components, ensuring no sacrifice in reliability.
  • Plug and play firmware
  • 4S to 12S capable
  • Up to 120Amps continuous current with airflow
  • 200A Burst current - With active current Limiting
  • True 10bit resolution
  • Virtually no setup time, with simple motor reverse solder tab
  • Auto-detect ProShot or Dshot any frequency range
  • ProShot1000 to ProShot3000 capable (1-3Mbs/s)
  • Dshot300 to Dshot2400 capabale (0.3-2.4Mbs/s)
  • Up to 750,000 eRPM
  • Auto PWM-freq
  • Auto Timing Advance
  • Telemetry output
  • Intelligent current sensing
  • Intelligent Regen (active-braking) control
  • LED indication
  • Digital commands over Proshot (including anti-turtle mode)
  • Digital commands over Dshot
  • 6-Layer PCB to ensure minimal track resistance

Specifications

  • Dimensions: 70x30x20mm
  • Weight:  9.10g

Includes

  • 1x APD F-SERIES 120F3[X] V2 X-Class 12S 120A ESC
Product form

$108.99

    SKU: sku-20157186998385

    Brand: RaceDayQuads | ESC

    Product Tags

    Description

    RDQ is proud to be the official APD USA Distributor!

    The improved F_Series 120F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 120F3[X]v2 ESCs are drop-in replaceable to 120F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetization, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 9 kW.

    The 120F3[X] V2 is designed to withstand the extreme demands of X-Class motor and prop combinations, where high inertia and fast spool-up/spool-down rates normally cause issues.

    Note: The V2 has all the same features as the V1. 

    Check out our ESC selection and all our APD X-Class Electronics!

    Features

    • Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability.  (V2)
    • Configuration of drive parameters, signal types and fault handling (V2)
    • Bi-Directional DShot for RPM Filtering support (V2)
    • On board bootloader (V2)
    • Passthrough firmware updating and configuration (V2)
    • Additional Telemetry types: PWM Telemetry and RPM Output (V2)
    • High-speed telemetry rates when operating DShot and ProShot (V2)
    • Reversible operation support (full forwards to full reverse) (V2)
    • Dynamic signal quality checks across supported input protocols (V2)
    • Hardware protection for UART programming pins (V2)
    • components, ensuring no sacrifice in reliability.
    • Plug and play firmware
    • 4S to 12S capable
    • Up to 120Amps continuous current with airflow
    • 200A Burst current - With active current Limiting
    • True 10bit resolution
    • Virtually no setup time, with simple motor reverse solder tab
    • Auto-detect ProShot or Dshot any frequency range
    • ProShot1000 to ProShot3000 capable (1-3Mbs/s)
    • Dshot300 to Dshot2400 capabale (0.3-2.4Mbs/s)
    • Up to 750,000 eRPM
    • Auto PWM-freq
    • Auto Timing Advance
    • Telemetry output
    • Intelligent current sensing
    • Intelligent Regen (active-braking) control
    • LED indication
    • Digital commands over Proshot (including anti-turtle mode)
    • Digital commands over Dshot
    • 6-Layer PCB to ensure minimal track resistance

    Specifications

    • Dimensions: 70x30x20mm
    • Weight:  9.10g

    Includes

    • 1x APD F-SERIES 120F3[X] V2 X-Class 12S 120A ESC

    Recently Viewed...

    © 2024 Caloosa Trains And Hobbies,

      • Amazon
      • American Express
      • Apple Pay
      • Discover
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Venmo
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account