HWA30108000, Hobbywing Quicrun 10BL60 Sensored Brushless ESC Features: High performance but low price- users can own this reliable race-ready ESC at an affordable cost. Compact size, suitable for various car chassis.  Auto identification system can recognize sensored or sensorless brushless motors automatically.  Smooth operation and plentiful adjustment options. Suitable for most kinds of competitions. 8 steps of timing adjustment greatly increase the output power of the motor and unlock its maximum potential.  Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment.  9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit various of cars, tires and tracks. Multiple protections: Low voltage cut-off protection for LiPo or NiMH battery / Over-heating protection / Throttle signal loss protection / Motor Lock-up protection.  One-button sets the ESC. Easily reset all parameters to factory default settings.  Compatible with optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use. Specifications: Applications: 1/10 & 1/12 On-road / Off-road / F1 / Drift car race / Street race for fun / Club racing / STOCK race with 0 timing / Drift car race Cont./Peak Current/Resistance: 60A/380A/0.0008? Motor Type Supported: Sensored / Sensorless Brushless Motor Car Applicable: 1:10 On-road/Off-road/Buggy/Monster Motor Limit:  2S LiPo or 4-6 cell NiMH: ?8.5T(1/10 On-road), ?13.5T(1/10 Off-road)* 3S LiPo or 8-9 cell NiMH: ?13.5T(1/10 On-road), ?17.5T(1/10 Off-road)* Battery: 4-9 cell NiMH, 2-3S LiPo BEC Output: 6V/2A (Linear Mode) Size: 33mm(L)*28mm(W)*31.5mm(H, with cooling fan)  Weight: 59g (with wires, without cooling Fan) External Program Port: Available *NOTE: Indicates the limit value of motor turns when the ESC timing is set to 0. The larger the timing, the more turns the motor needs. This product was added to our catalog on May 3, 2023

Read more less

HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth) The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control. Hobbywing FFD: A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs.  PWM Adjustments: From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition. Internal BEC: The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos. NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended. Features: 32 Bit, M4 microprocessor for ultimate performance Frameless fan design for extreme cooling Reverse polarity protection Precise adjustments to throttle and brake PWM Optimized programmable parameters Extended brake force Drag Brake Acceleration and Softening Function High output BEC Specifications: Wire gauge: 13 AWG Lightweight Ultra-flex Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1 Continuous Current: 160A Peak Current: 1200A Input Voltage: 2S LiPo / 4-6S Cell NiMH BEC Output: BEC voltage of 5-7.4V Programming device: LCD Program Box / OTA Programmer Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android)  Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud) Weight: 88g (with wires) Motor spec recommendation: Touring Car: >4.5T Buggy: >5.5T Includes: (1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC (1) Cooling Fan (1) Capacitors Decals Accessory package This product was added to our catalog on December 14, 2023

Read more less

HWA30125002, HobbyWing QuicRun 10BL120 G2 120A 1/10 Sensored Brushless ESC This product was added to our catalog on December 14, 2023

Read more less

HWA30401134, Hobbywing Xerun D10 Drift Brushless Motor (10.5T) (Black) Features: Designed for Drift: The Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple. Banana Plug Quick-Swap Design: The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC. Stator Designed for Drift: The motor stator is optimized for drift and improves motor efficiency in drift applications. Built-in with high-precision sensors board, combined with drift-specific fan rotors, providing excellent motor linearity and drivability while greatly improves motor efficiency. Lightweight: The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (including 3 gold insert weights). The lightweight motor allows user to easily tweak their weight bias on their car. Fan Rotor: Providing great heat dissipation, power the special-shaped gold fan on the rotor heats the motor while making a pleasant sound, especially when Turbo is turned on. Best paired with XD10 PRO ESC  Specifications: Application: 1/10th Drift car Input Voltage: 2S Lipo KV: 4600kv Rotor: 2 POLE ?7-12.2*24.1-BUT*-L1  Weight: 157  Can Size: 35.7xx52.6mm (1.41x2.07") Shaft Diameter: 3.175mm (0.125")  Shaft Length: 15.0mm (0.591") NOTE: To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices. The M3 screws with a length (no longer than 7mm) are needed when mounting the motor onto your vehicle. Please pay attention to the relevant marks (on the ESC) when soldering/connecting those output wires to the motor and make sure that you will strictly follow the wiring order (between the ESC & the motor) of “A-A, B-B, and C-C”. Please ensure the sensor cable is clean and undamaged when you’re using a sensor ESC. You need to pay attention to the two connectors on the cable when connecting the ESC to the motor. Re-check all the connections between the ESC & the motor and ensure that they are all correct before turning on the ESC. Timing Note: The D10 motors provide a wide range of adjustable mechanical timings, the following are the methods & principles you can follow when adjusting the timing. You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as needed according to the mark (white lines) at the rear end of the motor and fasten the screw after the adjustment. For obtaining optimal performance, you can change the output range and characteristics of your power system by adjusting the motor timing. Increasing the timing can increase the motor speed (RPM), while that also increases the motor temperature and reduces the efficiency. A high(er) timing usually requires a high(er) ratio. Please ensure your ESC is properly programmed before setting the motor timing. For detailed information about ESC programming, please refer to the user manual of the ESC. After the timing adjustment, please ensure that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the information about the motor temperature via a infra-red temperature gun. If the temperature is too high, please let the motor cool down first and then test again. If the temperature is still too high, then please reduce the timing or increase the FDR (that is to replace the pinion gear with fewer teeth or spur gear with more teeth). This product was added to our catalog on May 3, 2023

Read more less

HWA30408012, Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motor (21.5T) The Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motors feature an updated can design over the G2 - and especially G1 - and push the boundaries of an Fixed Timing Motor with lower weight, good heat dissipation and a rebuildable design. Features:  The use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability. The built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand. The silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor. The detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency. This motor is perfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands. This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice. The motor design is in compliance with IFMAR, and ROAR specifications. Specifications:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 2050LiPo Cells: 2-3SNo-Load Current(A): 3Outer Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 175g (6.17oz)Timing: FixedApplications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only). This product was added to our catalog on May 3, 2023

Read more less