TRA3678, Traxxas Wheelie Bar Assembly (Black) This is a replacement wheelie bar assembly from Traxxas. This wheelie bar mounts to the rear of the car to prevent if from flipping over backwards during hard acceleration. The patented Traxxas adjustable wheelie bar features four-position adjustment to control the height of your wheelies. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. Installation is quick and easy while optional aluminum wheels with rubber tires (5186 and 5186A) provide extra style and increased performance (sold separately). Replacement part for these models: Stampede® VXL Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® This product was added to our catalog on September 7, 2021

Read more less

TRA3752, Traxxas Stub Axle Carriers (2) (VXL) (requires 5x11x4mm bearings) Replacement part for these models: Bandit® VXL BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® Accessory part for these models: Bandit® This product was added to our catalog on September 7, 2021

Read more less

HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2) This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit. Features: CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction Replaces factory plastic drive axles Hard Black Anodized Aluminum Slider Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Hardened S2 Spring steel wheel shaft #45 Steel is black finish S2 spring in Brown finish Rubber dust boot to keep the Splined Drive for maximum protection against the elements Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes Specifications: Approximate overall collapsed length: 109mm Includes: (2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies (2) M4x2.5x11mm screw shafts Fits: Traxxas Rustler 2wd Traxxas Stampede 2wd This product was added to our catalog on December 16, 2021

Read more less

TRA2753X, Traxxas Rear Stub Axles (2) Replacement part for these models: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on May 7, 2021

Read more less

TRA3638, Traxxas Rear Shock Tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® This product was added to our catalog on September 7, 2021

Read more less

RPM70662, RPM Wide Front A-Arms (2) (Black) Traxxas Rustler Stampede This is a pair of optional RPM Wide Front A-Arms. Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM wide front A-arms will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. These Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “NOTE:” below) and bolt on a set of rear wheels! It couldn’t be easier. Available in black, blue or green.You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from RPM's trademark blend of nearly indestructible nylons and backed by their world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong! NOTE: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here: Rustler XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Stampede XL-5: 1 – RPM Screw Kit RPM70680, 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA2338 (96mm long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Rustler VXL: 1 – Traxxas TRA3643 (long camber links), 1 – Traxxas TRA3645 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). Stampede VXL: 1 – Traxxas TRA5138 (long toe links) & 1 pair of compatible front wheels (used to replace rear wheels). This product was added to our catalog on April 9, 2015 This product was added to our catalog on December 16, 2021

Read more less

RPM73752, Front Bulkhead, Black: TRA 2WD Product Details Key Features Fits Traxxas 2-Wheel drive 1/10 vehicles Made from RPM's trademarked blend of incredibly strong nylons RPM's industry-leading limited lifetime breakage warranty Available in different colors COMPATIBILITY Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Overview One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles. * Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed. Product Specifications Material Nylon Scale 1/10

Read more less