Tools & Maintenance
Traxxas TRA2748R, Traxxas Tool Set 1.5mm, 2.0mm, 2.5mm, 4-Way Wrench
TRA2748R, Traxxas Tool Set 1.5mm, 2.0mm, 2.5mm, 4-Way Wrench This product was added to our catalog on April 12, 2021
$6.00
Traxxas TRA5480X, Traxxas 17mm Splined Wheel Wrench
TRA5480X, Traxxas 17mm Splined Wheel Wrench This product was added to our catalog on May 7, 2021
$3.00
Duratrax DTXC2369, DuraTrax Pit Tech Deluxe Car Stand (Black)
DTXC2369, DuraTrax Pit Tech Deluxe Car Stand (Black) The Duratrax Pit Tech Deluxe Car Stand is a convenient workstation for your cars and trucks. No matter where you are, or where you are going, the sturdy stand disassembles easily and stores flat, making it perfect for carrying in a toolbox or field bag. Features: Ideal for all 1/10 cars, trucks and buggies. Molded rubber inserts in the upper plate grip chassis securely. Built-in holes keep shocks handy when rebuilding. Plate rotates to allow access from all sides; the dropped center accommodates racing chassis with lowered battery channels to provide a stable work platform. Extra-large parts tray in the base is designed to be easily accessible. This product was added to our catalog on June 8, 2021
$19.99
ProTek RC PTK-8243, ProTek RC "TruTorque" Metric 1/4" Power Drill Tip Set (4) (1.5, 2.0, 2.5, 3.0mm)
PTK-8243, ProTek RC "TruTorque" Metric 1/4" Power Drill Tip Set (4) (1.5, 2.0, 2.5, 3.0mm) This is a ProTek R/C "TruTorque" Metric Power Tool Tip Set, with 1.5, 2.0, 2.5 and 3.0mm tips. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier. Anyone who has used a cordless drill to wrench on their rig knows that when used properly, power tools can provide an incredible advantage. They not only allow you to replace damaged parts faster, but also help to prevent hand fatigue. ProTek R/C "TruTorque" Power Tool Tips are machined from high quality HSS steel for durability and long life. The precision cut tips provide an exceptional fit with the fastener. The 1/4" drive hex ends are designed to fit tools that accept a 1/4" drive hex socket. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. Features: Quality tool steel tips Standard 1/4" drive for compatibility with common power tools Size is marked on the tip for identification Specifications: Total Length: 85mm Tip Length: 54mm Material: HSS Steel Includes: (1) 1.5mm 1/4" Drive Power Tool Tip (1) 2.0mm 1/4" Drive Power Tool Tip (1) 2.5mm 1/4" Drive Power Tool Tip (1) 3.0mm 1/4" Drive Power Tool Tip This product was added to our catalog on December 16, 2021
$29.99
ProTek RC PTK-8485, ProTek RC Exactness High Grip Hobby Knife (#11 Blade)
PTK-8485, ProTek RC Exactness High Grip Hobby Knife (#11 Blade) The ProTek RC Exactness High Grip Hobby Knife is a great option for cutting or trimming plastic, polycarbonate, rubber, paper and wood. The soft handle has a hex nut on the adjusting end to keep the handle from rolling away but still allowing for a comfortable round handle. Using number 11 blades, this hobby knife also features a blade cover for safe storage and transport. Package includes one hobby knife and one blade. Features: Sharp, Long lasting #11 blade Soft, no slip handle Non-roll design Replacement blades available (PTK-8487) This product was added to our catalog on September 30, 2022
$9.99
ProTek RC PTK-8279, ProTek RC "TruTorque" Lexan Scissors (Straight)
PTK-8279, ProTek RC "TruTorque" Lexan Scissors (Straight) This product was added to our catalog on December 16, 2021
$6.99
Integy INTC22774BL, Integy Quad Hex Socket Wrench 7, 8, 17, 23mm, Blue
INTC22774BL, Integy Quad Hex Socket Wrench 7, 8, 17, 23mm, Blue This product was added to our catalog on October 3, 2021
$23.99
Traxxas TRA3426, Traxxas Rubber Pit Mat
TRA3426, Traxxas Rubber Pit Mat The Traxxas Rubber Pit Mat is perfect for any RC workstation. Featuring a chemical resistant thick rubber this pit mat will help protect the surface underneath from any damage. Built in recessed compartments will help keep screws and tools from rolling away. Package includes one pit mat.Specifications: Size: 36x20x0.25in (91.4x50.8x0.635cm) This product was added to our catalog on September 7, 2021
$39.99
Racers Edge RCEPRO7030, Racers Edge Cordless Drill with Clutch & Metric Tip Set (1.5/2.0/2.5/3mm)
RCEPRO7030, Racers Edge Cordless Drill with Clutch & Metric Tip Set (1.5/2.0/2.5/3mm) Use a quality tool set for your quality hobby time. The Racers Edge Cordless Drill with Clutch and Metric Hex Tip Set is a big upgrade to your tool kit. This kit includes the most common metric hex bits for the R/C enthusiast. Each tip can be quickly swapped out with the magnetic 1/4" tip receiver. A strong magnet helps small parts stay on the driver tip for ease of use. The handle of the drill is designed to swivel and go from a inline style drill, to a standard pistol grip drill. The integrated clutch helps to keep the powerful 180RPM, 3.5Nm drill from overdriving small parts and plastic components. Charging the drill is super convenient off any USB power supply with the included USB cable. The 3.6V, 1.3Ah integrated battery provides lasting battery life. The included hex bits have a hard titanium nitride coating which helps prevent corrosion and keeps your tips in tip-top shape. Whether you are just starting your journey in the hobby, or are looking to expand your tool kit, Racers Edge tools have you covered. Features: 180RPM 1.5Nm drill driver with integrated clutch and 1/4" bit adapter USB Charging and integrated 3.6V 1300mAh battery Swivel handle for comfort Includes 1.5mm, 2.0mm, 2.5mm, and 3.0mm TiN coated Hex bits This product was added to our catalog on March 30, 2021
$59.99
ProTek RC PTK-8487, ProTek RC Replacement #11 Hobby Knife Blades (10pcs)
PTK-8487, ProTek RC Replacement #11 Hobby Knife Blades (10pcs) ProTek RC Replacement #11 Hobby Knife Blades. These replacement blades are intended for the ProTek RC Hobby Knife (PTK-8485), or for any hobby knife requiring a #11 blade. Package includes ten blades. This product was added to our catalog on September 30, 2022
$6.99
ProTek RC PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer
PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer This product was added to our catalog on December 16, 2021
$22.49
Traxxas TRA8715-15, Traxxas Speed Bit Ball End 1.5mm Hex Driver Bit
TRA8715-15, Traxxas Speed Bit Ball End 1.5mm Hex Driver Bit This product was added to our catalog on May 7, 2021
$10.00
Traxxas TRA3980, Traxxas Glow Plug Wrench
TRA3980, Traxxas Glow Plug Wrench This product was added to our catalog on September 7, 2021
$3.00
ProTek RC PTK-8486, ProTek RC Sprue Side Cutter
PTK-8486, ProTek RC Sprue Side Cutter The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting control. Package includes one sprue cutter. Features: Precision cut blades with tapered edge Made from hardened stainless steel Comfortable soft grips Perfect for cutting parts and trimming tires This product was added to our catalog on September 30, 2022
$13.99
Traxxas TRA8715-20, Traxxas Speed Bit, Hex Driver, Straight, 2.0mm (110mm)
TRA8715-20, Traxxas Speed Bit, Hex Driver, Straight, 2.0mm (110mm) This product was added to our catalog on May 7, 2021
$9.99
ProTek RC PTK-8416, ProTek RC "TruTorque SL" Metric Hex Driver Set (4)
PTK-8416, ProTek RC "TruTorque SL" Metric Hex Driver Set (4) (1.5mm, 2.0mm, 2.5mm, 3.0mm) Features: CNC machined knurled aluminum handle with relief holes Rotating aluminum end cap Durable, precision cut, 80mm long HSS Steel tip Tip size is etched in three places on the handle for easy identification Includes: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 2.5mm Hex Driver (1) 3.0mm Hex Driver This product was added to our catalog on December 16, 2021
$58.99
Dynamite DYN7177, 17mm T-Handle Hex Wrench: LST2, 1/8 Buggy/Truggy
DYN7177, 17mm T-Handle Hex Wrench: LST2, 1/8 Buggy/Truggy
$26.99
Traxxas TRA8719-70, Traxxas Speed Bit, Nut Driver, 7.0mm
TRA8719-70, Traxxas Speed Bit, Nut Driver, 7.0mm Speed bit, nut driver, 7.0mm The 7.0 mm hex nut driver is made from hardened-steel to fit just right and prevent wear and rounding. The 1/4" drive shank features a laser-etched size for easy identification. This product was added to our catalog on September 7, 2021
$8.99
SRC SRC004P, Parts / Build Box
SRC004P, Parts / Build Box This product was added to our catalog on December 12, 2023
$16.99
Racer's Edge RCE7202, Titanium Phillips & Flat Tips, Power Tool Replacements (4pcs)
RCE7202, Titanium Phillips & Flat Tips, Power Tool Replacements (4pcs)
$14.99
Yeah Racing YEA-YT-0187, Yeah Racing Metric Hex Driver Set (4) (1.5, 2.0, 2.5, 3.0mm)
YEA-YT-0187, Yeah Racing Metric Hex Driver Set (4) (1.5, 2.0, 2.5, 3.0mm) Yeah Racing Metric Hex Driver Set. These hex wrenches are great for your pit bag/toolbox. Featuring anti-slip handles with improved tips. The four common sizes for RC are included giving you the piece of mind that you have the right tool. Includes: (1) 1.5mm Hex Wrench (1) 2.0mm Hex Wrench (1) 2.5mm Hex Wrench (1) 3.0mm Hex Wrench This product was added to our catalog on December 16, 2021
$32.99
ProTek RC PTK-2034, ProTek RC Aluminum Turnbuckle Wrench Set (3, 3.2, 3.5, 3.7, 4, 5, 5.5 & 6mm)
PTK-2034, ProTek RC Aluminum Turnbuckle Wrench Set (3, 3.2, 3.5, 3.7, 4, 5, 5.5 & 6mm) This product was added to our catalog on December 16, 2021
$39.99
SRC SRC011, Wing Buttons Team Asociated B6
SRC011, Wing Buttons Team Asociated B6 This product was added to our catalog on December 12, 2023
$8.99
JConcepts JCO2538-2, JConcepts 1/10 & 1/8 Aluminum Tire Balancer w/Case (Black)
The JConcepts Tire Balancer features an aluminum and steel design that blends nicely into any pit area. The balancer comes set in a storage box for protection and travel convenience. The collapsible design rests in a lay-down configuration but pivots to a 90 degree stance and locks when in usable condition. The center point of any balancer are the bearings, the free spinning action rests inside the JConcepts hub design. The interchangeable thumb nuts for 1/10th and 1/8th wheel versatility are located on the main axle which can be moved from its home base position to its critical balancing position with ease. The upright is built in aluminum material, anodized, etched with instructions and chamfered for that extra lustrous look. The base of the item is built to protect, position and maintain a small footprint at all times. The base has 4 stand-off legs to hold a steady structure while a thumb screw secures the upright in either the up or down position. The JConcepts balancer is pre-assembled and backed by JConcepts customer support and racing team lineage. NOTE: The JConcepts Racing Team uses a modeling clay for balancing material which is readily available through hobby based retailers. Features: JConcepts design, function Aluminum and steel construction Collapsible, lay-down design Center hub assembly with bearings Compatible with 1/10th and 1/8th vehicles Sturdy base with stand-off legs Black anodizing, etched instructions Thumb nut and screw assembly and use Pre-assembled Includes storage box with foam padding This product was added to our catalog on December 16, 2021
$90.00
Tamiya TAM54792, Model Polycarbonate Body Reinforcing Mesh Tape
TAM54792, Model Polycarbonate Body Reinforcing Mesh Tape
$8.00
ProTek RC PTK-8266, ProTek RC "TruTorque" Spring Clip Remover
PTK-8266, ProTek RC "TruTorque" Spring Clip Remover This product was added to our catalog on December 16, 2021
$15.99
DU-BRO DUB705, DuBro Ball Driver Set with Holder
DUB705, DuBro Ball Driver Set with Holder This is a 6 pc Set that includes a handy workbench or fieldbox holder for the Ball Wrenches. The perfect tools for getting at those hard to reach places. Ball wrenches make it possible to turn socket head screws or bolts from any angle. Set contains one each of :.050, 5/64, 3/32, 7/64, 9/64, and 5/32. This product was added to our catalog on October 9, 2021
$34.99
Yokomo YOK-YC-7, Yokomo Plastic Parts & Screws Carrying Case (7.5 x 8.9 x 1.6")
YOK-YC-7, Yokomo Plastic Parts & Screws Carrying Case (7.5 x 8.9 x 1.6") The YC-7 is around a medium size screw box, convenient for screws, parts, shock springs and even hex tools. With 4 rows of compartments and dozens of included partition plates, the YC-7 can be configured in a variety of combinations to accommodate different needs. Specifications: Dimensions: 190x225x40mm (7.5 x 8.9 x 1.6") This product was added to our catalog on September 18, 2021
$18.25
Traxxas TRA8719, Traxxas 6-Piece Metric Nut Driver Master Set w/Carrying Case (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm)
TRA8719, Traxxas 6-Piece Metric Nut Driver Master Set w/Carrying Case (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm) This is a Traxxas 6-Piece Metric Nut Driver Master Set, intended for use with Traxxas models to help simplify building and maintenance. Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an over-molded rubber design for more power and comfort. The precision-ground, hardened-steel tips fit just right, to prevent wear, rounding, and damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber over-molded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Features: Precision-ground, hardened steel metric nut drivers Rubber over-molded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Nut drivers 4.0 mm 4.5 mm 5.0 mm 5.5 mm 7.0 mm 8.0 mm This product was added to our catalog on June 26, 2021
$59.99
Integy INTC32438, Steel Drive Axle Cross Pins (4): Axial SCX24
INTC32438, Steel Drive Axle Cross Pins (4): Axial SCX24 Steel Drive Axle Cross Pins (4): Axial SCX24 This product was added to our catalog on April 10, 2024
$1.99
ProTek RC PTK-8282, ProTek RC 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm)
PTK-8282, ProTek RC "TruTorque SL" 4-Piece Metric Nut Driver Set (5.0, 5.5, 7.0, 8.0mm) This is the ProTek R/C "TruTorque SL" Metric Nut Driver Set. No one wants to spend money on low quality tools. Tools are an investment that should not be taken lightly and are one of the few items that should outlast the life of the model you are working on...and remain with you for years after. With so many choices available, the decision can be overwhelming. So ProTek R/C has stepped up again, expanding its product line with a complete range of affordable, high quality tools that help to make the decision a little easier. ProTek R/C "TruTorque SL" nut drivers feature updated, "super light" 20mm diameter machined aluminum handles that have been knurled to provide a high leverage, non slip surface that will be comfortable to use during long wrenching sessions. The tool size is etched into the handle for easy identification and a black rubber cap is fitted to the end to increase comfort during use. The precision cut tool steel tips provide an exceptional fit with the fastener, and feature a bronze colored finish that not only looks good, but also helps to protect the steel from corrosion. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. Features: Updated SL super light CNC machined knurled aluminum handles Size is marked on the handle for identification 4-Piece nut driver set Rubber end caps Includes: (1) 5.0mm Metric Nut Driver (1) 5.5mm Metric Nut Driver (1) 7.0mm Metric Nut Driver (1) 8.0mm Metric Nut Driver This product was added to our catalog on December 16, 2021
$50.99$46.99
Hot Racing HRASDW8MU, Hot Racing Dual System Wheel Balancer & Shock Stand
HRASDW8MU, Hot Racing Dual System Wheel Balancer & Shock Stand The Hot Racing balancer is an innovative tool designed for balancing aircraft or boat propellers, spinner car wheels, and tires. It significantly reduces vibrations on RC tires, enhancing overall handling and performance. Features: All-in-one system: Balancer, shock stand, and car stand Precision ground 3mm balancing shaft: Floating shaft design using powerful neodymium disk magnets Precision ground 4mm steel balancing shaft: Spin-ready even with heavier wheels and tires using stainless steel ball bearings Adjustable legs: Stand allows for leveling and can be used as a shock rebuild stand Multi-use: Can also function as a car stand, enhancing versatility Durable construction: CNC aluminum and steel construction ensures long-lasting usage Includes: (4) Ceramic Magnets (4) 6x12mm Ball Bearings (2) Aluminum Side Plates (4) Delrin Leveling Stands (3) Aluminum Rods for Base Support (1) 3mm Magnetic Balance Shaft (2) Aluminum 3mm Locking Cones (1) 4mm bearing Balance Shaft (2) Aluminum 3mm Locking Cones This product was added to our catalog on November 15, 2023
$38.99
SRC SRC012, Wing Buttons Team XRAY XB2
SRC011, Wing Buttons Team XRAY XB2 This product was added to our catalog on December 12, 2023
$8.99
JConcepts JCO2889, Analog Quick Reference Calipers
JCO2889, Analog Quick Reference Calipers JConcepts Analog Quick Reference Calipers allow users to reference dimensions quickly. Racers have asked over and over for a small footprint item that is able to measure small spaces accurately and quickly. The quick reference calipers are analog based and capable to be locked into place to secure or save dimensions for later or to copy side-to-side. The all-aluminum built and anodized item, built from 4 pieces, is a very technical and precise piece. The quick reference tool has the ability to measure inside surfaces and outside surfaces depending on which end is chosen for use. A metric graduated scale is laser etched onto the item to allow the user to measure in .5mm increments. A thumbscrew allows the sliding plane to be locked into place for quick comparisons and reference distances. A display window is machined into the upper slide where dimensions are shown up to an overall length of 80mm. A small overall size makes it ideal to place in to RC sized tool and lock boxes used routinely out in the field. Features: JConcepts design and function Highly detailed design, 4-piece construction Graduated scale measuring in .5mm increments to 80mm Lockable sliding plane to save reference dimensions This product was added to our catalog on May 22, 2021
$80.00
Racer's Edge RCE7086, 14mm T-Handle Ratchet Wheel
RCE7086, 14mm T-Handle Ratchet Wheel
$17.99