PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Features: Molded-in High-Performance Herringbone Weave Pattern Belt Reaction HP Tire Will Not Balloon or Expand During Use Specifically Made for No-prep Drag Racing Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires  (2) Soft Foam Inserts  This product was added to our catalog on November 21, 2021

Read more less

JCO3181-101011, JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex These are the JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires. The JConcepts Pin Swag 2.2" 2wd slim front tires are designed to combine the outer lugs of the JConcepts Swagger front tire with a dense arrangement of pins. The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with an angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. Features: JConcepts original design, details, and materials Pre-mounted for convenience Low profile carcass layout Pin and Swag combo pin/lug arrangement Hefty base pin with crisp ends Dense layout to help minimize wear. Ultra-light weight scalloped tire beads. Available in bright white or fluorescent yellow colors This product was added to our catalog on June 20, 2022

Read more less

PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator) This is a pack of two Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires with included Open Cell Memory Foams. Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything the Race might throw at you. The Hyrax features an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line’s Legendary G8 material, so you know it provides performance you can depend on. Features: Ground up Design for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle tough terrain in Scale Style Made in the Legendary G8 Material Made in the USA, since 1982 Specifications: Height: 5.75" (146mm) Width: 2.15" (55mm) Includes: (2) Hyrax 2.2” G8 Rock Terrain Truck Tires (2) Open Cell Foam Inserts This product was added to our catalog on July 18, 2021

Read more less

PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires were developed specifically for no-prep RC Drag racing! These Hoosier Drag Slick tires not only look amazingly scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound. The Hoosier Drag Slick tire and every other tire that Pro-Line makes is proudly Made in the USA.  Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier 2.2" Drag Front Tires to Complete the Look Available in Soft S3 Compound or the more Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Hoosier Drag Slick SC 2.2"/3.0" Tires  (2) Closed Cell Foam Inserts This product was added to our catalog on May 13, 2019

Read more less

TRA7175, Traxxas Pre-Mounted Response Pro 2.2 Tires (S1/Soft) (2) Give your 1/16 E-Revo VXL competition style and track ready performance! Traxxas' new dish wheels and Response Pro tires are engineered for competition grade traction and superior grip in all off-road conditions. Patterned after the Revo 3.3 Platinum Edition's race-winning tire design, the new 2.2" Response Pro tires are molded in soft S1-compound for maximum grip and feature a versatile micro-block tread that offers superior handling. Foam inserts are included, and the Response Pro tires are available unmounted in pairs, or factory-mounted and glued to new 2.2 dish wheels. In addition to providing a sleek look, the dish wheels increase the E-Revo's overall width by 14mm for even greater straight-line stability and cornering agility. Standard-size 12mm hexes allow Traxxas 2.2” dish wheels to be used with many 1/10 scale buggies as well. The dish wheels accept all popular 2.2" buggy tires, including Traxxas Alias 2.2” tires. 2.2" Response Pro Tires Features: Designed after the national championship-winning 3.8” Response Pro tires Race-proven, S1 soft-compound rubber improves traction and cornering grip Performance-tuned foam inserts included 2.2" Dish Wheel features: Standard-size 12mm hex Fits Traxxas Bandit when used with #1654 hex adapter Lightweight, aerodynamic design 7mm wider offset than stock 1/16 E-Revo wheels for enhanced off-road stability Accept standard buggy rear 2.2" tires This product was added to our catalog on May 3, 2021

Read more less

JCO3192010, JConcepts Fuzz Bite Carpet Short Course Tire (2) (Pink) The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides a quick transition at high speed and minimizes side wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight-knit CRC carpeting. The alternating rows of pins provide side bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also a forward mid-corner launch grip. A unique feature of the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. Note: During the gluing process, it is also handy to have some breathing room for the gluing process and the geometry gives many edges and ledges to adhere to. Features: JConcepts original design, details, and materialsLow profile carcass layout Reverse “water tower” pin shape Radius positioned pin arrangement Directional sidewall lugging Ultra lightweight scalloped tire beads Plush open cell inserts included This product was added to our catalog on October 2, 2023

Read more less

JCO3191, Concepts Fuzz Bite Carpet 2.2" Pre-Mounted Stadium Truck Tires (2) (Pink) w/12mm Hex The Fuzz Bite lands on a stadium truck carcass carried over from already successful tires in the line-up. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting. The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also forward mid-corner launch grip. Inside the carcass, small sidewall ribs help support heavy corning force and built to work in conjunction with included foam inserts. A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to. Features: JConcepts original design, details, and materialsLow profile carcass layout Reverse “water tower” pin shape Radius positioned pin arrangement Directional sidewall lugging Ultra lightweight scalloped tire beads Plush open cell inserts included This product was added to our catalog on October 6, 2023

Read more less

PRO1016110, Pro-Line Street Fighter LP 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex The Pro-Line Street Fighter Low Profile 2.8" Tires with Raid 6x30 Removable Hex Wheels take the guess work out of your glue job by doing the mounting for you so you can spend more time having fun! Looking for the ultimate street tire? Then check out Pro-Line's Street Fighter LP (Low Profile) 2.8” Tire perfect for your Rustler 2WD and 4WD, Stampede 2wd and 4x4 and the 2WD JATO. Based on the latest in high performance on-road tire technology, the Street Fighter LP 2.8" tire has the perfect balance of G force enhancement and style that will keep your truck turning heads! Street Fighter tires comes Pre-Mounted on a true next generation 2.8” wheel design from Pro-Line, the Raid 2.8” Removable Hex Wheel for all 2.8” tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also imagine being able to replace a damaged wheel hex without needing to replace your glued tires (6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (6336-00 Sold Separately) for extreme use! These Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Features: Tire: Street Tread Perfect for your Rustler® 2wd or Rustler® 4x4 Grip and Rip on Asphalt and Concrete Aggressive Long Wear Street Tread Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Fits: Rustler 2wd Rustler 4x4 Stampede 2wd Stampede 4x4 JATO Rear Specifications:  Height: 4.07" (103mm)  Width: 2.05" (52mm)  Includes:  (2) Street Fighter LP 2.8” Tires (2) Foam Inserts This product was added to our catalog on May 7, 2021

Read more less

JCO3191-010, JConcepts Fuzz Bite Carpet 2.2" Stadium Truck Tires (2) (Pink) This is the JConcepts Fuzz Bite Carpet 2.2" Stadium Truck Tire. This is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces. The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides a quick transition at high speed and minimizes side wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight-knit CRC carpeting. The alternating rows of pins provide side bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with an angular cross to give consistent cornering but also a forward mid-corner launch grip. A unique feature of the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. Note: During the gluing process, it is also handy to have some breathing room for the gluing process and the geometry gives many edges and ledges to adhere to. Features: JConcepts original design, details, and materials Low profile carcass layout Reverse “water tower” pin shape Radius positioned pin arrangement Directional sidewall lugging Ultra lightweight scalloped tire beads Plush open cell inserts included This product was added to our catalog on April 16, 2023

Read more less

JCO3347W, JConcepts 12mm Hex Mono 2.2 Front Wheels (4) (B6/B5/RB6) (White)This product was added to our catalog on December 16, 2021

Read more less