RPM Parts & Accessories
RPM RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from. RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! This product was added to our catalog on March 2, 2021
$11.95
RPM RPM81162, Wide Front Bumper: Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede and Nitro Rustler
Overview Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc.! Note: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede and Nitro Rustler Note: Replaces stock Traxxas #2735 Specifications Material: Composite Refinement Color: Black RPM81162, RPM Traxxas Rustler/Stampede Wide Front Bumper (Black) This product was added to our catalog on December 16, 2021
$6.95
RPM RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede)
RPM80372, RPM Front Bearing Carrier Set (Black) (2) (Slash, Bandit, Rustler, Stampede) RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings have higher load ratings than a 5x8mm bearing and will significantly increase the time between maintenance. In addition, these oversized bearing carriers are so strong, RPM guarantee that they won't ever break! When used in conjunction with the RPM Rear Bearing Carriers (RPM80382), you'll never have to worry about worn-out bushings or blown wheel bearings again! NOTE: 5x11x4mm bearings are not included. 4 bearings are required. Features: Fits the 2WD Slash, Nitro Slash, Bandit, Electric Rustler and Electric Stampede Replaces stock Traxxas #3736 5x11x4mm size bearings not included Available in Black and Blue This product was added to our catalog on October 13, 2021
$8.95
RPM RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH Product Details Key Features Strong and durable Overview Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break! Product Specifications Refinement Color Black Material Plastic
$8.95
RPM RPM80592, RPM Traxxas Slash Rear A-Arms (Black) (2)
RPM80592, RPM Traxxas Slash Rear A-Arms (Black) (2) This product was added to our catalog on May 16, 2021
$11.95
RPM RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2) A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks. This product was added to our catalog on December 16, 2021
$10.95
RPM RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2)
RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2) This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM80372 & RPM80382). RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain. Features: Nearly 25% lighter than stock Stronger material resists flexing and breaking Increased clearance in outer area of arms This product was added to our catalog on December 16, 2021
$10.95
RPM RPM70862, RPM LaTrax Front/Rear Suspension Arm (2)
RPM70862, RPM LaTrax Front/Rear Suspension Arm (2) This is an optional set of two RPM LaTrax Front or Rear Suspension Arms, intended for use with the Traxxas LaTrax Prerunner, Teton or SST kits. These lightweight optional parts are a strong, rigid upgrade for your 1/18th scale Latrax. Features:Sold in pairsLightweight, rigid option over stock partsMade in the USA This product was added to our catalog on December 16, 2021
$9.95
RPM RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732)
RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732) RPM Traxxas X-Maxx Oversized Inner Bearings are replacement bearings for X-Maxx trucks equipped with optional RPM Traxxas X-Maxx Oversized Axle Carriers (RPM81732). NOTE: These bearings are 20x32x7mm in size and are not compatible with stock Traxxas axle carriers (TRA7752). This product was added to our catalog on December 16, 2021
$11.95
RPM RPM80852, RPM Traxxas Front Shock Tower (Rustler, Stampede, Bandit, Slash)
RPM80852, RPM Traxxas Front Shock Tower (Rustler, Stampede, Bandit, Slash) This product was added to our catalog on December 16, 2021
$7.95
RPM RPM70100, RPM Small Parts Tray w/Magnet
RPM70100, RPM Small Parts Tray w/MagnetThis product was added to our catalog on December 16, 2021
$1.95
RPM RPM72082, RPM Losi Mini-T 2.0/Mini-B Heavy Duty Front A-Arms (Black)
RPM72082, RPM Losi Mini-T 2.0/Mini-B Heavy Duty Front A-Arms (Black) This product was added to our catalog on December 16, 2021
$9.95
RPM RPM73752, Front Bulkhead, Black: Fits Traxxas 2-Wheel drive 1/10 vehicles
RPM73752, Front Bulkhead, Black: TRA 2WD Product Details Key Features Fits Traxxas 2-Wheel drive 1/10 vehicles Made from RPM's trademarked blend of incredibly strong nylons RPM's industry-leading limited lifetime breakage warranty Available in different colors COMPATIBILITY Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Overview One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles. * Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed. Product Specifications Material Nylon Scale 1/10
$11.95
RPM RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black)
RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black) RPM Traxxas Sledge Front Bumper and Skid Plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system. RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection. NOTES: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas (TRA9535). This product was added to our catalog on January 27, 2023
$18.95
RPM RPM70950, RPM Precision Monster Truck Camber Gauge
RPM70950, RPM Precision Monster Truck Camber Gauge This product was added to our catalog on December 16, 2021
$11.95
RPM RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set
RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set This is an optional RPM Threaded Hinge Pin Set for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer A-arm hinge pin location. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information). This product was added to our catalog on December 16, 2021
$9.95
RPM RPM81562, RPM Arrma 8S BLX Front Right Upper & Lower Suspension Arms (2)
RPM81562, RPM Arrma 8S BLX Front Right Upper & Lower Suspension Arms (2)This product was added to our catalog on December 16, 2021
$27.95
RPM RPM73152, RPM Lower Spring Cups (Black) (4)
RPM73152, RPM Lower Spring Cups (Black) (4)This product was added to our catalog on December 16, 2021
$2.95
RPM RPM80692, RPM Front Upper & Lower A-Arm Set (1/16 E-Revo) (Black)
RPM80692, RPM Front Upper & Lower A-Arm Set (1/16 E-Revo) (Black)This product was added to our catalog on December 16, 2021
$14.95
RPM RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black)
RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black) This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on December 16, 2021
$15.95
RPM RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black)
RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black) This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks. RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on February 6, 2021
$15.95
RPM RPM80962, RPM Traxxas Rustler 4x4 Wheelie Bar Mount
RPM80962, RPM Traxxas Rustler 4x4 Wheelie Bar Mount This product was added to our catalog on May 16, 2021
$9.95
RPM RPM81552, RPM “N2O” Resto-Mod Sedan Wheels (2) (Gloss Black)
RPM81552, RPM “N2O” Resto-Mod Sedan Wheels (2) (Gloss Black)This product was added to our catalog on December 16, 2021
$10.95
RPM RPM70412, ESC Cage-CSE Mamba X 8S ESC, Kraton 8S, Outcast 8S
RPM70412, ESC Cage-CSE Mamba X 8S ESC, Kraton 8S, Outcast 8S
$11.95
RPM RPM81402, Rear A-Arms: ARRMA Kraton, Talion & Outcast
RPM81402, Rear A-Arms: ARRMA Kraton, Talion & Outcast RPM81402, RPM ARRMA Kraton/Outcast Rear A-Arms (Black) This product was added to our catalog on December 16, 2021
$13.95
RPM ARA311077, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (15T)
ARA311077, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (15T) This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision CNC machined Wide tooth profile for smooth operation Suits 1/8" (3.175mm) motor shaft diameter Laser etched with tooth count for easy identification Precision manufactured threaded set-screw hole 4x4mm set screw included Includes: (1) 0.8 Mod Pinion Gear (1) Set Screw (4x4mm) This product was added to our catalog on August 5, 2022
$6.99
RPM RPM80902, RPM Bumper Mount (Black) (Rustler, Stampede, Bandit, Slash)
RPM80902, Rear Bumper/Wheely Bar Mnt, Black: ST, BA, RU, SLH This product was added to our catalog on May 16, 2021
$9.95
RPM RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue)
RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue) This is a set of RPM Front Upper & Lower A-Arms, and are intended for use with the Traxxas 1/16 E-Revo. Upon the release of the 1/16th Scale Traxxas Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With RPM's guaranteed unbreakable material and a proven A-arm design based off of their larger, 1/10th scale Revo A-arms durability for these little powerhouse trucks has finally arrived! Another problem that has been eliminated was slop in the suspension system. In some cases, as much as 1/32” of slop is found in the stock A-arms! That problem has been solved with these new RPM versions. RPM A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result is smoother, more consistent steering and suspension movement with a significantly reduced tendency for the truck to randomly wander while driving. These arms also feature angled leading and trailing edges. RPM incorporates a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms, and are backed by RPM's industry-leading breakage warranty. If it breaks (under normal operating conditions), send it to RPM and they will replace it! This product was added to our catalog on December 16, 2021
$14.95
RPM RPM70652, RPM Traxxas Slash LCG 4x4 & Rally Nerf Bar Set (Black)
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black) This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit! RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under! RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage. Features: Available in Black and Blue This product was added to our catalog on July 31, 2021
$8.95
RPM RPM80842, RPM Arrma Typhon 4x4 3S BLX Rear Suspension Arm Set (Black)
RPM80842, RPM Arrma Typhon 4x4 3S BLX Rear Suspension Arm Set (Black)This product was added to our catalog on December 16, 2021
$12.95
RPM RPM72152, RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)
RPM72152, RPM Losi Mini-T 2.0 Heavy Duty Rear A-Arms (Black)This product was added to our catalog on December 16, 2021
$9.95
RPM RPM80832, R Shock Tower,Black: RU, ST, BA, SLH
RPM80832, R Shock Tower,Black: RU, ST, BA, SLH Product Details Overview RPM rear shock towers for the electric versions of the Stampede, Rustler & Bandit as well as the Slash were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Product Specifications Part Type Shocks & Shock Parts Refinement Color Black Material Plastic
$8.95
RPM RPM81642, Wing Mounts :ARRMA Kraton, Talion
RPM81642, Wing Mounts :ARRMA Kraton, Talion
$16.95
RPM RPM81502, Rear A-arms: Arrma 3S 4x4-Big Rock, Senton, Granite
RPM81502, Rear A-arms: Arrma 3S 4x4-Big Rock, Senton, Granite The RPM Arrma 4x4 Rear Suspension Arm Set is compatible with 4×4 3S BLX versions of the Granite and Senton. These optional arms offer increased adjustability, improved durability and reduced weight.Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. This outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds.Durability: Molded from RPM's trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! RPM also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments.Lightweight: With RPM's stronger materials and improved designs, they are able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability.Features:Fits 3s BLX 4×4 versions of the Granite & SentonExclusive 2nd shock mount hole for added adjustabilityReplaces stock AR330516NOTE: RPM A-arms fit the following ARRMA vehicles; Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Rear A-arms replace ARRMA #AR330516. This item was added to our catalog March 2, 2024
$11.95
RPM RPM80762, Front A-arms: ARRMA Typhon 4x4 3S BLX
RPM80762, Front A-arms: ARRMA Typhon 4x4 3S BLX
$12.95
RPM ARA311080, 18T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311080, 18T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$9.99
RPM RPM80195, RPM Traxxas Revo/Summit Rear Left/Right A-Arms (Blue)
RPM80195, RPM Traxxas Revo/Summit Rear Left/Right A-Arms (Blue) This is a pair of blue A Arms for the Traxxas Revo, made by RPM. These arms are for the rear of the truck, and will work on either the left or the right side of the truck. These arms are dyed blue. This product was added to our catalog on December 16, 2021
$12.95
RPM RPM73372, RPM Heavy Duty 4-40 Rod Ends (Black) (12)
RPM73372, RPM Heavy Duty 4-40 Rod Ends (Black) (12)This product was added to our catalog on December 16, 2021
$4.95
RPM RPM80232, RPM Mini Front Bumper (Black)
RPM80232, RPM Mini Front Bumper (Black)This product was added to our catalog on December 16, 2021
$4.95
RPM RPM80952, RPM Traxxas Slash Front Bumper & Skid Plate (Black)
RPM80952, RPM Traxxas Slash Front Bumper & Skid Plate (Black)This product was added to our catalog on December 16, 2021
$12.95
RPM RPM80705, RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue)
RPM80705, RPM Traxxas Slash 4x4 Front or Rear A-arms (Blue) This product was added to our catalog on December 16, 2021
$11.95
RPM RPM70172, RPM Rear Hub Carrier Set
RPM70172, RPM Rear Hub Carrier SetThis product was added to our catalog on December 16, 2021
$10.95
RPM RPM82352, RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2)
RPM82352, RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2)This product was added to our catalog on December 16, 2021
$27.95
RPM RPM73755, RPM Traxxas 2WD Front Bulkhead (Blue)
RPM73755, RPM Traxxas 2WD Front Bulkhead (Blue) Fits: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on May 16, 2021
$11.95
RPM RPM81392, RPM ARRMA Front Upper & Lower Suspension Arm Set
RPM81392, RPM ARRMA Front Upper & Lower Suspension Arm SetThis product was added to our catalog on December 16, 2021
$14.95
RPM RPM81362, RPM Unlimited Desert Racer Trailing Arm Skid Plates (2)
RPM81362, RPM Unlimited Desert Racer Trailing Arm Skid Plates (2)This product was added to our catalog on December 16, 2021
$6.95
RPM RPM80552, RPM X-Maxx Body Savers
RPM80552, RPM X-Maxx Body SaversThis product was added to our catalog on December 16, 2021
$14.95
RPM RPM81332, Rear Skid Plate for most ARRMA 6S vehicles
RPM81332, Rear Skid Plate for most ARRMA 6S vehicles One of the most expensive replacement items on any vehicle is the chassis, especially when that chassis is a 3-4mm thick aluminum plate. On ARRMA 6S vehicles, there's absolutely no protection for the underside of the chassis. Rocks, roots, asphalt, etc, can all create nasty scabs, scrapes, and dents that will eventually lead to the need for a replacement. Reduce skid and scrape damage by installing this RPM Rear Skid Plate to your favorite ride. The areas most prone to damage are at the extreme ends of the chassis, and the RPM Rear Skid Plate protects the rear end with 4mm of RPM engineering grade nylons. This Skid Plate is not only extremely tough and durable, it also slides up and over obstacles much easier than aluminum. The leading edge has been rolled to a thin edge to reduce the likelihood of it catching. The rear is a full 4mm thick for a long-lasting skid plate built to handle some serious punishment! Tech Notes: The RPM #81332 Skid Plate is compatible with V5 & EXB model 6S ARRMA vehicles and is reverse compatible with older version vehicles (V1 - V4) as well. It is designed specifically for the ARRMA Kraton V5, yet will fit most ARRMA vehicles running stock gearbox case set #AR310854 or #AR310427. Features: fits most ARRMA 6S vehicles (V5, EXB & older) its most ARRMA vehicles running stock gearbox case set #AR310427 or #AR310854 fits most Durango vehicles running stock gearbox case set #TD210046 Item Added: 11/29/2021
$8.95
You have seen 48 out of 395 products