Replacement Body
PROTOform PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am
PRM155240, 1971 Chevrolet Camaro Z28 Clear Body :VTA Class 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am Product Specifications Manufacturer # 1552-40 Body 1971 Camaro Z28 Material Polycarbonate Product Height 4.17" (106 mm) Product Length 17.25" (438 mm) Product Width 8.07" (205 mm) Refinement Color Clear Scale 1/10 Vehicle Type Touring Car Wheelbase 10.1" (257 mm)
$45.00
JConcepts JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)
JCO0418, JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) The JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body is a great way to add customization and a personalized flair to your Street Eliminator set-up. The ATS-V is Cadillac's vigorous, brawny contender, eager to represent against all other performance rides. JConcepts took on recommendations from racers and dove into a project utilizing the coupe style vehicle for the drag racing community. The Cadillac features a V-forged front-end with details chiseled into the headlight area which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recess vents. The included front hood-scoop brings a drag racing flair and blends up to the gradually shaped windshield. The roof is slightly railed, channeling the air over the rear-end and coupe section down to the trunk-lid. Fender flares protrude from the main body shape blend into the railed and splitter along the rocker-panels. The rear trunk cover fits and flows around the back to a recessed center section and allows perfect positioning of the rear taillights. The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included to bring out another side to the Cadillac which is a drag racing animal. Included in each body set, a 2019 Cadillac ATS-V decal sheet and the paint mask for all windows. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: 2019 Cadillac ATS-V faithful representation Direct fit for Team Associated DR10 Sized for an assortment of SCT length trucks with width modifications Rear trunk deck spoiler with lower support structure Decal sheet with Cadillac and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Wheelbase: 13.00" Inside Dimensions: Front: 11.50" Rear: 12.00” This product was added to our catalog on December 16, 2021
$60.00
Traxxas TRA6811X, Body, Slash 4X4, ProGraphix (Graphics are printed, requires paint & final color application)/ decal sheet
6811X - Body, Slash 4X4, ProGraphix (Graphics are printed, requires paint & final color application)/ decal sheet TRA6811X, BODY SLASH 4X4 PRGRPHX This product was added to our catalog on September 7, 2021
$47.50
ARRMA ARA402270, Arrma Typhon 4x4 Body (Clear)
ARA402270, Arrma Typhon 4x4 Body (Clear) This is an Arrma Clear Typhon 4x4 Body, intended for use with BLX 4x4 and Mega 4x4 Typhon kits. This high-quality TYPHON 4X4 Body is perfect for creating a custom painted look for your ARRMA vehicle. Features: Tough Polycarbonate for increased impact resistance and long-lasting durability TYPHON 4X4 BLX Vinyl Decal Sheet included for added detail Pre-trimmed for fast and easy fi Protective Overspray Film for fast and easy custom painting Includes: (1) TYPHON 4X4 Clear Body Shell (1) TYPHON 4X4 BLX Decal Sheet This product was added to our catalog on November 6, 2022
$36.99
Traxxas TRA5826T, Traxxas Body, Ford Raptor, Fox (Heavy Duty)
TRA5826T, Traxxas Body, Ford Raptor, Fox (Heavy Duty) This product was added to our catalog on September 7, 2021
$85.00
Yokomo YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit
YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Retro Iconic Buggy with Modern Capabilities & Performance Stop Reminiscing and bring the 80s 4WD Off-Road buggy racing back to life with the ultimate off-road machine that enlivened the 1980s off-road scene! It is no exaggeration to say that it became the foundation of modern off-road racing, and it is a legendary platform that boasted overwhelming speed in off-road races to gain so much popularity during that golden era or RC Racing! Although Yokomo kept the design and shape untouched, in order to utilize current power sources, this reproduced version comes equipped with gear differentials and a slipper clutch, providing a drive train capable of running powerful modern Lipo batteries. In addition, to further modify the platform to accommodate today's power supply, the battery tray was designed to fit big and small capacity models shorty LiPo batteries! Despite the fact that this vintage race machine comes with the original body, wing, and under cowling to faithfully recreate the original buggy, it has been fully updated for today’s modern power system, while also maintaining much of the original vintage feel! Equipped with aluminum bulkheads, aluminum front and rear knuckles, FRP shock towers, FRP main chassis and hard anodized aluminum shocks, providing much needed durability and boosting performance! Get the legendary Super Dog Fighter and experience the modern performance in a retro style! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: A Re-release version of the original legendary buggy released in 1987 Hard anodized aluminum shocks Aluminum bulkhead Aluminum front and rear knuckles FRP main chassis with a battery tray that can accommodate sub-C size batteries, as well as shorty lipo batteries. Original FRP front and rear shock towers Durable gear differentials and a slipper clutch to accommodate the modern power sources and output. Adjustable turnbuckles Specifications: Scale: 1/10 Drivetrain: Belt Driven 4WD Power Supply: Electric Completion Level: Unassembled kit Includes: (1) Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Needed to Complete: (1) 2 Channel radio system (1) Steering servo (1) 540 Motor (1) Electronic speed control (1) 7.2V NiMh or 2S Shorty LiPo Battery (1) Compatible Battery Charger This product was added to our catalog on January 12, 2024
$469.99
Traxxas Traxxas Body, Chevrolet K10 Truck (1979)
Traxxas Body, Chevrolet K10 Truck (1979) Body, Chevrolet K10 Truck (1979), complete, red (includes grille, side mirrors, door handles, roll bar, windshield wipers, & clipless mounting) (requires #9835 front & rear bumpers) This product was added to our catalog on November 17, 2023
$39.99
Traxxas TRA7420, Traxxas Clipless mounts, body (left & right) (for #7412 series bodies)
TRA7420, Traxxas Clipless mounts, body (left & right) (for #7412 series bodies) This product was added to our catalog on September 7, 2023
$8.00
Traxxas TRA7412, Traxxas Ford Fiesta St Rally Pre-Cut Body (Clear)
TRA7412, Traxxas Ford Fiesta St Rally Pre-Cut Body (Clear) This product was added to our catalog on September 7, 2021
$65.00
Traxxas Traxxas Interior, Chevrolet Blazer (1969 -1972)
Traxxas Interior, Chevrolet Blazer (1969 -1972) Interior, Chevrolet Blazer (1969 -1972) (includes rollbar, gauge bezel, steering wheel and column, shifter, armrest, decals) (fits #9111, 9112, 9130, or 9131 series bodies) (#9111 or 9112 series bodies require #9128 body cage for installation) This product was added to our catalog on June 16, 2021
$34.99
Traxxas TRA5750, Traxxas Body Clip Retainer Set (Black) (4)
TRA5750, Traxxas Body Clip Retainer Set (Black) (4) This product was added to our catalog on September 7, 2021
$3.00
McAllister Racing MR273, McAllister Racing #273 ASA Style Camaro Late Model Body
MR273, McAllister Racing #273 ASA Style Camaro Late Model Body This is a body only. This product was added to our catalog on December 28, 2023
$29.99
Traxxas Traxxas Stampede 2WD ProGraphix Pre-Painted Body
Traxxas Stampede 2WD ProGraphix Pre-Painted Body Traxxas Stampede 2WD Pre-Painted Body. This pre-painted and pre-trimmed body is a replacement for the Traxxas Stampede 2WD but can also be used as an option for the Stampede 2WD and Stampede VXL 2WD monster truck. Package includes one pre-painted body. This product was added to our catalog on October 4, 2023
$39.99
Traxxas TRA7611, Traxxas LaTrax Teton Body (Clear)
TRA7611, Traxxas LaTrax Teton Body (Clear) From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body and decals also come in the kit. This product was added to our catalog on September 7, 2021
$15.00
Tamiya TAM54604, Tamiya Body Mount Extension Set
TAM54604, Tamiya Body Mount Extension Set Tamiya Body Mount Extension Set. These body mounts fit TT-01, TT-02, TA-05, TA-08, TB-03, TB-04, XV-01, FF-03, M-05, and M-06 chassis cars. Package includes eight body mounts and four body clips. This product was added to our catalog on February 22, 2022
$7.25
McAllister Racing MR212, McAllister Racing #212 Wild Cat 3
MR212, McAllister Racing #212 Wild Cat 3 This is a body only. This product was added to our catalog on October 9, 2023
$29.99
McAllister Racing MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body
MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body This is a 1/10 Scale Xfinity Camaro Ultra Light Body. Features: Compatible with 1/10 scale pan cars and touring cars. Clear, unpainted body. Made from 0.020 Ultra Light thickness genuine Lexan. Made in the USA. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on October 9, 2023
$29.99
Salvas 2023 Salvas MudBoss PreCut Dirt Modified Body
2023 Salvas Mud Boss PreCut Dirt Modified Body For Traxxas Slash Features: Fits 2wd Traxxas Slash Short Course Truck 2023 Updated Version, Comes Pre-Drilled for Current 3 Piece Inner Panel and the New Nextgen Inner panel "51" marking on panels to indicate that this is a genuine Salvas body direct from Eric Salvas Slit running along A Pillar Includes: Instructions 30 Plastic Nuts/Bolts to Hold body together All Body panels are clear Lexan, you will need to construct, wrap or paint. * Please note that these bodies are cut on a water jet and not cut by hand. For that reason they DO NOT have any type of protective wrap or coating on the body panels. This product was added on September 29, 2023
$59.99
McAllister Racing MR192, McAllister Racing 2003 Mustang Cobra
MR192, McAllister Racing 2003 Mustang Cobra Mustang Cobra 190mm Body is Clear and comes with window masks. Body is Painted to show finished product. No detail sheet is included. This is a body only. This product was added to our catalog on June 1, 2023
$29.99
KYOSHO KYOFAB707, Kyosho 200mm Dodge 1970 Charger Body Set (Clear)
KYOFAB707, Kyosho 200mm Dodge 1970 Charger Body Set (Clear) Kyosho 200mm Dodge 1970 Charger Body Set. This optional body set intended for the Kyosho Fazer. Made from durable polycarbonate, this body set includes the needed components for the bug catcher, light covers and detailed grille. Package includes one clear body with molded components. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. This product was added to our catalog on April 5, 2023
$69.99
KYOSHO KYOFAB605, Kyosho Toyota Supra Body Set (Clear)
KYOFAB605, Kyosho Toyota Supra Body Set (Clear) Kyosho Toyota Supra Clear Body Set. This optional clear Supra body set is intended for the Kyosho Fazer Mk2 FZ02, however, it will fit most bodies with a 260mm wheelbase. Package includes one clear Lexan body, window masks and two decal sheets NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. This product was added to our catalog on May 10, 2023
$62.99
KYOSHO KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black)
KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black) Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set. This replacement body set is intended for the Kyosho Fazer Mk2. Featuring extreme detail and is equipped with many molded components to and classic bowtie styling. Package includes one pre-painted body and instruction sheet. Specifications: Wheelbase: 10.78" (274mm) Dimensions: 19.29x8.18x4.56" (490x208x116mm) This product was added to our catalog on May 10, 2023
$100.99
Traxxas TRA7515, Traxxas LaTrax 1/18 Rally Body (Red)
TRA7515, Traxxas LaTrax 1/18 Rally Body (Red) This product was added to our catalog on September 7, 2021
$18.00
Traxxas TRA8386A, BODY 4-TEC 2.0 CORVETTE GRPHT
TRA8386A, BODY 4-TEC 2.0 CORVETTE GRPHT This product was added to our catalog on September 7, 2021
$78.99
KYOSHO KYOFAB606SL, Kyosho Nissan Skyline 2000GT-R Tuned Version Silver Deco Body Set
KYOFAB606SL, Kyosho Nissan Skyline 2000GT-R Tuned Version Silver Deco Body Set This product was added to our catalog on May 10, 2023
$109.99
Traxxas TRA5812, Traxxas Body, Slash 4X4, Prographix
TRA5812, Traxxas Body, Slash 4X4, Prographix This product was added to our catalog on September 7, 2021
$44.99
ARRMA ARA406156, Kraton 6S BLX Painted Decaled Trimmed Body (Red)
ARA406156, Kraton 6S BLX Painted Decaled Trimmed Body (Red) Arrma Kraton 6S BLX Pre-Painted Body. This is a replacement body intended for the Arrma Kraton 6S BLX monster truck. Features: Strong and flexible Polycarbonate material for long-lasting performance Aggressive styling for awesome looks and advanced aerodynamic performance at high speeds Pre-painted trim scheme for eye-catching looks Decorated in high quality decals for added detail and realism Pre-trimmed for fast and easy fit Pre-drilled body post holes for fast and easy mounting Includes: (1) Kraton 6S BLX Pre-Painted Body (Red) This product was added to our catalog on February 16, 2022
$68.99
Traxxas TRA6717X, Traxxas Rustler 4X4 Pre-Painted Body (Blue/Silver)
TRA6717X, Traxxas Rustler 4X4 Pre-Painted Body (Blue/Silver) This product was added to our catalog on September 7, 2021
$59.99
Traxxas TRA8611R, Traxxas E-Revo VXL 2.0 Pre-Painted Monster Truck Body (Black)
TRA8611R, Traxxas E-Revo VXL 2.0 Pre-Painted Monster Truck Body (Black) Traxxas E-Revo VXL 2.0 Pre-Painted Monster Truck Body. This replacement body is intended to freshen up your Traxxas E-Revo VXL 2.0. Package includes one pre-cut body, with factory installed body mounts and roof skid. This product was added to our catalog on September 7, 2021
$79.99
Traxxas TRA8090X, Traxxas TRX-4 1969/1972 K5 Blazer Complete Pro Scale LED Light Set
TRA8090, Traxxas TRX-4 1969/1972 K5 Chevrolet Blazer Complete Pro Scale LED Light Set Traxxas TRX-4 1969/1972 K5 Blazer Complete Pro Scale LED Light Set. This optional LED light set is intended for the Traxxas TRX-4 when equipped with the 1969 or 1972 K5 Blazer body. Using this set will allow for headlights with low and high beams, turn signals with automatic cancellation, hazard lights and brake lights with reverse lamps. For maximum power and convenience, add the Traxxas Link and the optional Wireless Module (TRA6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes adding lights to your rig easy. Features: Headlights with high/low beam settings Brake lights Reverse lights Turn signals with auto-cancellation Hazard lights Includes: (1) Complete LED light Set (1) Pro Scale Lighting Power Module and mount (1) Pro Scale Lighting Distribution Block and mount (1) Motor sensors wire harness (1) Front and rear light harness (1) MAXX Link cable (1) Receiver communication cable Installation hardware This product was added to our catalog on September 7, 2021
$99.99
Traxxas Traxxas 4-Tec 3.0 Chevrolet Corvette Stingray Body
Traxxas 4-Tec 3.0 Chevrolet Corvette Stingray Body Replacement body is made from a tough polycarbonate material and comes pre-cut and pre-painted (Colored Bodies Only) for ease of use. Finishing the body are factory installed decals, ProGraphix paint and pre installed body accessories. This body is available in multiple colors allowing you to match your kit or change to an alternative color. Package includes one Corvette body intended for the Traxxas 4-Tec 3.0. Available In: Black Blue Red Silver Clear This product was added to our catalog on May 7, 2021
$119.99
Traxxas TRA5848, Traxxas Slash 4X4 Pre-Painted Body (Rock N' Roll)
TRA5848, Traxxas Slash 4X4 Pre-Painted Body (Rock N' Roll) Traxxas Slash 4X4 Pre-Painted Body. Package includes factory painted and trimmed body with decals applied. This product was added to our catalog on April 12, 2021
$65.00
Traxxas TRA3720T, Traxxas Rustler VXL Body, orange (painted, decals applied)
TRA3720T, Traxxas Rustler VXL Body, orange (painted, decals applied) This product was added to our catalog on March 7, 2023
$39.99
Traxxas TRA7812X, Traxxas XRT Monster Truck Pre-Painted Body (Prographix)
TRA7812X, Traxxas XRT Monster Truck Pre-Painted Body (Prographix) This is a Traxxas XRT ProGraphix Body, and is intended for use with the XRT Truck. This body comes 80% pre-painted with the graphics already painted on the inside, however large portions of the body are left clear so you can apply your own final color to finish the paint scheme. Included is one body with a decal sheet for windows, grill and lights. This product was added to our catalog on April 27, 2023
$85.00
Redcat Racing RER14488, Blue Classic Edition
PRODUCT FEATURES 1/10 Truck Body with Roof Skids and Spoiler (Blue) (1pc) Direct Replacement for Volcano EPX/EPX Pro Can be mounted on most 1/10th size trucks
$30.99
Redcat Racing REDRC-C, 1/10 On Road Stocker Body, Clear
1/10 Scale On Road Body Length - 19" or 483mm Width - 8" or 203mm Height - 3.5" or 89mm Wheelbase - 10.5" or 267mm Color - Clear Window Stickers Included - Yes Other Stickers Included - Yes Precut - Yes
$29.99
$24.99
Team Associated ASC20531C, Pro4 SC10 General Tire RTR LiPo Combo
ASC20531C, Pro4 SC10 General Tire RTR LiPo Combo Product Detail In The Box (1) Pro4 SC10 General Tire Short Course Truck RTR (1) #27201 Reedy Compact Balance Charger (1) #751 Reedy 7.4V 2S LiPo Battery with T-plug (1) Product Manual Needed to Complete (4) AA batteries used in the transmitter
$399.99
PROTOform PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm)
PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm) The Protoform Chevrolet Corvette C8 Touring Car Body is an officially-licensed body, developed for USGT class racing. All the exceptional details of its 1:1 counterpart including aggressive cab forward design, striking front splitter, and sculpted side doors and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette branded windshield headers, number plates, "Jake" skulls and USA flags. This C8 fits modern 190mm touring cars and is formed from high-quality polycarbonate with paint-then-peel overspray film. It also includes an add-on rear wing with the USGT-sanctioned 10mm trim height, wing buttons with mounting hardware and window masks. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: Incredible Scale Details Officially-licensed by General Motors® USGT Ready Made in the USA Fits 190mm TC Specifications: Length: 17.68" (449mm) Width: 7.6" (193mm) Wheelbase: 10.1" (257mm) Includes: Chevy® Corvette™ C8 Clear Body Wing Buttons Under-wing Nuts Extensive Decal Sheet Paint-then-peel Over Spray Film & Window Masks This product was added to our catalog on April 3, 2021
$41.99
PROTOform PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body
PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body
$36.24
Redcat Racing RED25188-3, 1/10 Truck Body (Yellow)
PRODUCT FEATURES 1/10 Truck Body Length - 16" or 406mm Width - 6.5" or 165mm Height - 4.5" or 114mm Wheelbase - 10" or 254mm Color - Black with yellow and silver accents Window Stickers Included - Yes Other Stickers Included - Yes Precut - Yes This product was added to our catalog on December 16, 2021
$29.99
Bittydesign BDYGT7-S65, Bittydesign Seven65 1/7 GT Supercar Body (Clear) (Arrma Infraction/Limitless)
BDYGT7-S65, Bittydesign Seven65 1/7 GT Supercar Body (Clear) (Arrma Infraction/Limitless) The Bittydesign Seven65 Arrma Infraction/Limitless 1/7 GT Supercar Body is inspired by british GT3 supercars. The Seven65 body shell was developed over several months with every detail optimized in order to create an exotic, ultra low CG, super aerodynamic and realistic looking body for 1/7 scale options from Arrma and Traxxas. Designed for the Infraction series, this body also fits the Limitless with the additional parts listed below. Combine this with the Bittydesign Foam Front Bumper (BDYARA-FOMS65) to help eliminate turbulence that is generated under the model. Important: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Details: The body shell has been designed on the ARRMA® Infraction™ Compatible with Limitless™ with minor modification. Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick Includes a complete set of screws, nuts and large plastic washers to properly attach the included rear wing Also fits Traxxas® XO-1™ chassis with modification Sold clear with protective film outside Includes body, wing, decals, window masks and hardware Installation on Limitless applications requires the following optional parts: Front Bumper Support: ARA320521 Front Splitter: ARA320520 or XTR12381 Bittydesign Foam Front Bumper: BDYARA-FOMS65 Rear Body Mount Frame Set: ARA320516 Body Post Mount Set: ARA320517 Body Post Set: ARA320357 Specifications: Length: 710mm Width: 310mm Height: 155mm Wheelbase: 406mm (with ARRMA DBoots Hoons wheels diameter 100x43mm, ARA550070) This product was added to our catalog on December 16, 2021
$94.99
JConcepts JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear)
JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear) NOTE: This body will most likely require a custom fit, or modification, to fit most short course trucks. JConcepts has adapted the iconic 1991 Ford Mustang into a street eliminator machine. The Mustang is intended for street racing and drops to popular SCT conversions and drag racing builds currently in the market. JConcepts looked to build on the street eliminator class by adding the “Fox Body” to the line-up. With past success used as a guideline, the R&D team spent time breaking down the early model Mustangs and arrived at the roughly 13” wheel base and 10.75” width. The size accommodates the trend of utilizing SCT trucks as drag racing platforms. The end result has a low-slung appearance, tight wheel well openings, hood-scoop, bobbed tail and an extended front fascia. As an addition, JConcepts has included a rear spoiler option which attaches with an under / over technique. Each package also includes a the custom window mask, 1991 generation Ford Mustang specific decal sheet and clear polycarbonate body. The product is always backed by JConcepts customer service, supported and used trackside by the JConcepts world-wide racing team and developed by professionals with style and authenticity. Note: The lower rear spoiler support is mounted carefully to the back of the trunk using double sided tape or shoe goo (not included). The upper wing section sits down on top of the base and is attached with the same technique described above. The rear spoiler provides the look and finishing touch to the street eliminator project. Specifications | Options The Ford Mustang measures a 13" wheelbase and the inside dimensions of the body are 10.75" wide front and 11.375" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the body. The JConcepts display vehicle is fitted with and available separately, Hotties tire (JCO3193 front) and (JCO3194 rear) made specifically for the 12mm hex StarTec wheels (JCO3387B) front and rear. The Hotties are purpose built drag racing tires that look the part and available in multiple compounds to suit demanding needs. The StarTec wheels are injected molded for durability and light-weight performance and available in the stealth black color. Features: Officially licensed by Ford to JConcepts Body measures 10.75” in width and 13” wheelbase Two-piece rear spoiler for street elimination competition Fits an assortment of SCT length trucks with width modifications Scale inspired body, cab and window design 1:1 headlight and grill treatment Clear heavy-duty polycarbonate with protective film Window masks and detailed Ford Mustang decal sheet NOTE: Complete and painted model shown for illustrative purposes only and is not included. This product was added to our catalog on August 22, 2021
$51.00
Traxxas TRA6593, Distribution block, Pro Scale® Advanced Lighting Control System
6593 - Distribution block, Pro Scale® Advanced Lighting Control System This product was added to our catalog on September 7, 2021
$15.00
Tamiya TAM54792, Model Polycarbonate Body Reinforcing Mesh Tape
TAM54792, Model Polycarbonate Body Reinforcing Mesh Tape
$8.00
Traxxas TRA6592, Power module, Pro Scale® Advanced Lighting Control System
6592 - Power module, Pro Scale® Advanced Lighting Control System TRA6592, PRO SCALE POWER MODULE This product was added to our catalog on September 7, 2021
$40.00
JConcepts JCO0365, Clear Body, 1955 Chevy Bel Air Drag Eliminator
JCO0365, 1955 Chevy Bel Air Street Eliminator Drag Racing Body (Clear) The JConcepts 1955 Chevy Bel Air Street Eliminator Drag Racing Body is a no prep replica of one of the most popular cars in the door slammer racing since. Taking on this project was not an effortless task, doing a great deal of R&D, the team went for the more race inspired style and decided to split up the design into 3 different parts. First, the main Bel Air shell has been carefully crafted via CAD and hand shaped and finish to realize the many details found on the 1955. The stunning looks, slightly modified for drag racing, create a low-profile build, racy, laid-back front grille and unmistakable front headlight section. JConcepts has designed the entire race body with the shoebox look as it was called in the 50’s. Along with the flatter straighter panels, the '55 also has modern cues like wrap-around glass on the windshield, and tail lights that jut outward. The body shell has built-in trim along the main panels which can be painted and detailed by the user to emulate the real steel. In the rear, the drop-dome roof glides toward the trunk deck which allows the 2-piece spoiler package to drop into place. Sculpted and abbreviated (race-style) bumpers are molded with the body and just like all the rest, can be painted as desired. The front hood-scoop is a separate polycarbonate piece which has a special form just to under-cut and look the size and shape as a 1:1 counterpart. Slight fender flares give the user a hint of trimming direction for the 13” wheelbase and wheel well openings. The trim lines throughout the body provide a low-profile appearance and steady guide for a clean overall look. Included in each body set, a 1955 Chevy Bel Air decal sheet, rear wing option including lower support and upper wing spoiler and the paint mask for all windows. A front hood-scoop is also part of each body set and ready for trim, fit and finishing. As always, each body set is backed with JConcepts customer support and racing heritage. The Chevy Bel Air measures a 13.00" wheelbase and the inside dimensions of the body are 11.25" wide front and 12.00" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the Chevy body. NOTE: The rear wing consists of two pieces, the lower section is designed with an L-shape with support ribs which require double-sided tape (not included) to attach to the back of the trunk lid. Once base is attached, apply more double-sided tape to match locations on the top wing and drop the main wing down into place. The hood-scoop is also applied with double-sided tape and it can be applied by installing 1 small strip of tape on both sides of the scoop. To finish, flex the scoop out and drop down and press firmly against tape. Photos show body mounted on Team Associated DR10. Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: 1955 Chevy Bel Air drag racer faithful representation Two-piece rear wing for street elimination competition Fits an assortment of SCT length trucks with width modifications Decal sheet with Chevy, Bel Air and JConcepts badges Officially licensed by Chevrolet to JConcepts
$60.00
ARRMA ARA410002, ARRMA® INFRACTION 1/7 Scale Finished Body (Matte Bronze Camo)
ARA410002, ARRMA® INFRACTION 1/7 Scale Finished Body (Matte Bronze Camo) Product Details This high-quality polycarbonate INFRACTION 6S pre-painted bodyshell is the perfect replacement for your kit item. Features Strong and flexible polycarbonate material for long-lasting performance - Pre-painted with a matte bronze camo trim scheme for eye-catching looks - Decorated in high quality decals for added detail and realism - Pre-trimmed for fast and easy fit - Pre-drilled body post mounting holes for fast and easy mounting Includes 1 x INFRACTION 6S BLX PAINTED DECALED TRIMMED BODY Product Specifications Manufacturer # ARAC1138 Material Polycarbonate
$100.99$90.00
You have seen 144 out of 333 products