R/C Marine Parts & Accessories
Speedmaster SPDS-015-BSF, Bushing 1/4" for Large Struts
SPDS-015-BSF, Bushing 1/4" for Large Struts
$6.00
Speedmaster SPDTF-100-XLM, X Large Turn Fin Kit (Mono)
SPDTF-100-XLM, X Large Turn Fin Kit (Mono)
$18.95
Speedmaster SPDR-012-DU-6, Straight Back D/P Rudder Assembly
SPDR-012-DU-6, Straight Back D/P Rudder Assembly
$58.95
Speedmaster SPD-098, Radio Box Tape
SPD-098, Radio Box Tape
$28.99
Speedmaster SPDSD-G250, SPEEDMASTER 1/4" Gas Drive Barrell W/Liner SPDSDB-G250
SPEEDMASTER 1/4" Gas Drive Barrell W/LinerSPDSDB-G250
$59.99
Speedmaster SPDZT-001, Speed Master Throttle Linkage Kit
SPDZT-001, Speed Master Throttle Linkage Kit Includes all hardware items as shown in the picture. Suits Walbro WT-644, WT-257 and WT-1048 carbs
$17.95
Speedmaster SPDWO-100-L, Water Outlet Large
SPDWO-100-L, Water Outlet Large
$3.95
Speedmaster SPDFS-187-24, 3/16" X 24" Cable
SPDFS-187-24 3/16" X 24" Flex Cable
$20.00
Speedmaster OSE-80905, Aluminum large bore water outlet
Aluminum large bore water outlet.Specs:Length: 25mm (0.98")Use with 1/4" tubingAvailable in Black or Silver
$3.54
Speedmaster OSE-80090, Servo Mount: Standard Size Adjustable
Aluminum with anodized silver servo mount for standard size servos(for example Futaba S3003 etc.).Servo width mounting plate is adjustable.All nuts and screws included. Servo NOT included. Notes: For use in a rc boat this will require either gluing it directly to the hull or a wooden base to screw into. Some servos will require slight modifications if there are bulges or wires sticking out of the sides.Will fit upto 43mm wide servo.
$9.54
Speedmaster SPDS-014-BSF, Bushing 3/16" for Small Struts
SPDS-014-BSF, Bushing 3/16" for Small Struts
$6.00
Speedmaster SPDT-100, Speedmaster 1" x 1.5" Adjustable Metal Trim Tabs
SPDT-100, Speedmaster 1" x 1.5" Adjustable Metal Trim Tabs
$25.95
Speedmaster SPDTB-200, Deluxe T-Bar, (For 5" Engine Rails)
SPDTB-200, Deluxe T Bar, (For 5" Engine Rails)
$49.95
Speedmaster SPDPM-004-LM, Large Mono Pipe Mount Kit
SPDPM-004-LH, Large Hydro Pipe Mount Kit
$21.99
Speedmaster SPDEC-8MM-250, Speedmaster Collet Style Couplers, 8mm to .250
Speedmaster Collet Style Couplers Coupler Size - 8mm to .250
$37.48
Speedmaster SPDS-011-250MR, Strut Assembly (round bottom)
SPDS-011-250MR, Strut Assembly (round bottom)
$30.00
Speedmaster SPDRS-009-SNGT, Small Rudder Assembly with Angle Bracket
SPDRS-009-SNGT, Small Rudder Assembly with Angle Bracket
$52.99
Speedmaster CTH-83401, OSE Quick Change 5" Rail Motor Mount, for 56mm Motor with 4 bolt pattern
Quick Change 5" Rail Motor Mount, for 56mm Motor with 4 bolt pattern
$62.48
Speedmaster SPDEC-5MM-187, Speedmaster Flex Cable Collet 5mm x .187
Flex Cable Collet for electric motor used with .187 flex cable includes 2 stainless steel setscrews. Made in the USA
$34.99
Speedmaster SPDS-011-250R, Cat Strut Assembly (round bottom)
SPDS-011-250R, Cat Strut Assembly (round bottom)
$30.00
Speedmaster SPDFS-250-30, Speedmaster Flex Shaft Assembly .250 X 30 inch
SPDFS-250-30, Speedmaster Flex Shaft Assembly .250 X 30 inch
$32.95
Speedmaster SPDZE-002-XTK, Exhaust Extension Kit
Exhaust Extension Kit
$23.95
Speedmaster SPDRS-100-SM, Turn-fin
SPDRS-100-SM, Turn-fin
$11.00
Speedmaster SPDPM-004-LH, Large Hydro Pipe Mount Kit
SPDPM-004-LH Large Hydro Pipe Mount Kit
$14.99
Speedmaster SPDR-012-DU, Dual Pickup Rudder, Straight Blade,SPDR-012-DU
SPDR-012-DU,Dual Pickup Rudder, Straight Blade. This Rudder Is Typically Used On Cat Boats,,,.60 And Above
$24.99
Speedmaster OSE-88376, 56mm Angled Motor Mount
CNC cut aluminum mount works well in narrow areas like catamaran sponsons where there isn't enough room for an adjustable mount. The fixed angle is ridged enough for the longest of 56mm motors. Shown in picture with Leopard 5692 (not included) and Ham-leopard-56L water jacket (not included).Specifications:Motor holes are 30mm apart.Holes for 4mm screws.67mm (2.64") wide.Weight 3.4 ounces Available in Black or Silver Colorations Requires:Installation, Glue and fiberglass to fix the mount into the hull. Motor mounting screws.
$21.59
Speedmaster SPDFS-187250-36-RH, Speedmaster Flex Cable 3/16" x 1/4" x 36" RH
SPDFS-187250-36-RH, Speedmaster Flex Cable 3/16" x 1/4" x 36" RH
$39.95
Speedmaster SPDZM-013, Gas Engine Mount
SPDZM-013, Gas Engine Mount Zenoah Motor Mount w/Throttle Kit and Coil Relocator Bracket
$74.99
Speedmaster SPDZC-001, Zenoah Collet 1/4" Shaft
SPDZC-001, Zenoah Collet 1/4" Shaft
$29.95
Speedmaster SPDPM-009, Large Pipe Grommet
SPDPM-009, Large Pipe Grommet
$4.99
Speedmaster SPDZE-002, 5/8 Silicone Coupler
SPDZE-002, 5/8 Silicone Coupler
$8.99
Speedmaster SPDFS-250-36, Speedmaster Flex Shaft Assembly – .250 x 36 inch with Hardened Threaded Stub Shaft 1/4-28
SPDFS-250-36, Speedmaster Flex Shaft Assembly – .250 x 36 inch with Hardened Threaded Stub Shaft 1/4-28
$39.99
Speedmaster SPDR-012-DU-4, Straight Back D/P Rudder Assembly
SPDR-012-DU-4, Straight Back D/P Rudder Assembly
$56.99
Speedmaster spdrs-009-21dut, Speedmaster 21 Rudder Assembly w/ Extended Tee Bracket
spdrs-009-21, Speedmaster 21 Rudder Assembly w/ Extended Tee Bracket
$59.99
Speedmaster SPDT-200, 2" x 2" Trim Tab Kit
SPDT-200, 2" x 2" Trim Tab Kit
$26.99
Speedmaster SPDT-150, Speedmaster 1.5" x 1.5" Adjustable Metal Trim Tabs (2 Pairs)
SPDT-150, Speedmaster 1.5" x 1.5" Adjustable Metal Trim Tabs (2 Pairs) Speedmaster 1 1/2" x 1 1/2" tabs. These tabs are perfect for dialing in any mono and at the same time saving some weight. CNC cut Aluminum adjusting bracket with stainless trim plate.Same as part number ros-spdt-150 but this package comes with (2) pairs of tabs.These adjustable trim tabs measure approx. 1.5" (38.10mm) wide x 1.5" (38.10mm) Long x .70" (17.80mm) height(2) pairs per pack.
$29.95
Speedmaster SPDSD-6090, Nitro, for 1/4" (.250") propeller shaft
SPDSD-6090: Nitro, for 1/4" (.250") propeller shaft. Speedmaster Stinger StrutIt can be quickly adjusted from positive to negative thrust angles. The bushing is cross drilled to hold grease for an extra smooth driveline. It is constructed with high quality aluminum and CNC cut to tight tolerances. This has been often copied by other manufactures but never truly has been duplicated.
$47.94
Speedmaster SPDSB-010-250F, EXT .250 STRUT BLD F/B
SPDSB-010-250F, EXT .250 STRUT BLD F/B
$17.96
Speedmaster SPDSB-014-225, 2 1/4" BEARING BLOCK
SPDSB-014-225, 2 1/4" BEARING BLOCK
$13.28
Speedmaster LEO-56110, Leopard 56110 Motor
Leopard 56110 brushless motorSpecial while supplies last, includes water Jacket with Leopard Motor Purchase!56mm Diameter x 110mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.Specs:Magnets: NeodymiumWatts: 5000 with Over 6000 Burst.Poles: 4Motor Shaft: 8mmCan Measures: 56mm diameter x 110mm longMounting screw diameter required: 4mmMounting Holes 30mm apartWeighs: 40.5 ouncesBearing size: 8mm wide x 19mm od x 6mm idIncludes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. OSE Suggests 20,000-35,000 total rpm for boats. We suggest most Fast Electric Boaters should run in the 25,000RPM range for Sport Boating or 30,000RPM Range for racing. These are only guidelines, we suggest if you do not have the knowledge to pick the correct motor, please consult us first or other members of the rc fast electric boating community. Either at a local club or on our OSE Forums.
$233.99
Speedmaster OSE-526B30, TFL Bearing Clamp Oiler : Red
TFL's new Bearing Clamp Oiler. Just tighten and attach an oil source and you will have easy and convenient lubrication during run time. Specs:- For .250" 6.35mm Cables- Bearing Diameter: 6.85mm- Water Fitting: M5- Length: 20mm (0.79")- Width: 30mm (1.18")- Height: 30mm (1.18")- Weight: 19.84g (0.7 Oz)
$11.99
Speedmaster OCT-X465R, OCTURA PROPELLER
Diameter: 2.56"Total Pitch: 1.4x2.56=3.584"Shaft Size: 3/16"Attention! This prop is made for boat that require a clockwise spinning prop!
$34.99
Speedmaster SPDFS-187250-36, Speedmaster Flex Cable 3/16" x 1/4" x 36"
SPDFS-187250-36, Speedmaster Flex Cable 3/16" x 1/4" x 36"
$39.95
Speedmaster SPDMR-580, Speedmaster Motor Mount Cushion – 5/8 in.
SPDMR-580, 5/8" Motor Mount Cushion (4 required)
$2.30
Speedmaster SPDR-005-M, Mini Rudder Assembly Mono
SPDR-005-M, Mini Rudder Assembly Mono
$39.95
Speedmaster SPDSD-2140, 3/16" Shaft 3 Bolt Transom Bracket
3/16" Shaft 3 Bolt Transom Bracket
$39.95