Redcat Lightning EPX Drift 1/10 RTR 4WD Touring Car The Redcat 1/10 RTR 4WD Lightning EPX Drift Kit features a combination of 27T 540 brushed motor and drift specific RC tires that allow the Lightning EPX Drift to slide effortlessly around corners, while maintaining a steady forward momentum. Its lightweight plastic chassis allows for quick drift recovery and almost effortless changes in direction. A forward and reverse ESC allow the Lightning EPX Drift to back out of trouble while the 2.4GHz radio system provides reliable control for maneuvering multiple corners in a matter of seconds. The Lightning EPX Drift’s aluminum capped oil filled shocks with selectable mounting positions, tunable 4-wheel independent suspension, adjustable ride height, adjustable toe angle, and adjustable camber angle allow drivers to tune for any track and driving style. Ready to run, the Lightning EPX Drift includes a rechargeable battery pack, battery charger, and 2.4GHz radio system. Features: 1/10 scale drift car, Scale drift tires, 5-Star rims, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Bearings throughout. Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions. Realistic drift car body, Hard drift tires, Shaft driven 4 Wheel drive. 19T RC550 Brushed Electric Motor, 40a Waterproof ESC, Powerful steering servo, 2.4GHz radio. Assembled & Ready to Run - Includes 7.2V 2000mAh NIMH rechargeable battery with NiMH battery charger - Requires AA Batteries for transmitter. Specifications: Vehicle Scale: 1/10 Servo Type: Qty 1 Hi-Torque Servo for Steering Radio System: 2.4GHz Radio System Transmission: Forward and Reverse Wheelbase: 260mm Battery: 7.2v 2000mAh NiMh & Charger Included Length: 360mm Ground Clearance: 4.5mm Needed to Run: 8 AA Batteries for Remote Control Width: 200mm Chassis Type: Plastic Height: 112mm Speed Control Type: 40a Brushed Waterproof ESC Includes: 7.2V 2000mAh NIMH rechargeable battery NiMH battery charger Needed to Complete: AA batteries for transmitter This product was added to our catalog on March 23, 2021

Read more less

PRODUCT FEATURES The Redcat Volcano EPX Pro 1:10 scale RTR Monster Truck gets a makeover, with a new body, wheels and tires. Vehicle battery and charger are sold separately. Fast and powerful, the Volcano EPX Pro is ready to run (battery & charger not included) and includes a 3300KV RC540 brushless electric motor, waterproof 60A electronic speed controller (ESC), powerful 6Kg steering servo, and our proven 2.4GHz radio system. Add your own battery charger or we recommend the Hexfly 5800 MAh 7.4V LiPo battery pack and the Hexfly HX-403 LiPO balance charger are a perfect fit. The Volcano EPX pro uses a lightweight and durable molded plastic chassis with an aluminum upper brace plate for added rigidity. Low center of gravity gives the Volcano EPX Pro nimble handling while maintaining that aggressive monster truck look we all love. The Volcano EPX Pro’s rugged looking body includes hard plastic skid plates on the roof and rear spoiler. These hard plastic components not only add protection from rollovers and crashes, they also look amazing. Large white Redcat lettering rides inside each of the Volcano EPX Pro’s sporty looking 10-spoke wheels to set off the appearance of this incredible looking monster truck. The Volcano EPX Pro is fully adjustable and upgradable. A total of eight aluminum threaded body oil filled shocks are easily adjusted by twisting the spring tension collars and are completely tunable with aftermarket shock oils, pistons, and/or springs. The included dual-rate springs are designed to offer superior handling over small bumps and large jumps alike. There are also several upper and lower shock mounting positions for dialing in performance even further. Tunable metal gear sealed differentials, four wheel independent suspension, adjustable metal turnbuckles, and aggressive monster truck tires allow the driver to get loads of traction on many different surfaces while a complete set of bearings provide smooth and reliable power delivery. The adjustable metal turnbuckles allow the driver to fine tune camber and toe angle for the very best performance handling on any surface or race track. The Volcano EPX Pro monster truck is a fully tunable hobby grade RC monster truck and comes pre-tuned for most driving situations. The Volcano EPX Pro is among the best selling RTR monster trucks of all time for a reason. Not only is it exciting to drive and really fast, the Volcano EPX Pro has huge parts support with many available custom aftermarket parts, including color anodized machined aluminum parts, as well as a large selection of other performance options. The Volcano EPX Pro, with brushless power system and 2.4GHz radio, is erupting with excitement. Pull the throttle and get your adrenaline flowing with this 1:10 scale, 4WD, RTR brushless monster truck. Buy yours today! Battery and charger not included. • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout. • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle. • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout. • 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system. • Assembled & Ready to Run - Requires LiPO Battery, LiPO safe Battery charger, and 4-AA Batteries for Transmitter.

Read more less

RER1704, Redcat RDS 1/10 2WD Ready to Run Brushless Drift Car We’ve been banging on the doors of the competition with the RDS 1:10 scale brushless electric 2WD competition Spec drift car.The RDS is ready to run and includes all the necessary radio gear and electronics to get you on the track quickly. Since battery size and weight are a tuning preference, the RDS does not include a battery or charger. The RDS will accept a competition style 2S shorty LiPo pack, LCG 2S shorty pack, or a standard sized 2S stick pack. We’ve engineered the RDS from the ground up, for a specific purpose, to compete. The RDS is a highly competitive rear wheel drive drift car that excels on surfaces which are found on many prepared RC drift tracks, such as carpet, p-tile, and polished concrete. The RDS can also be used on unpolished concrete and asphalt, though you may not get to experience its full potential on these rougher surfaces. The RDS is ready to run and includes a 2.4GHz radio system, 540 3300kv brushless motor, 60A brushless ESC, coreless digital Hexfly Drift-Spec steering servo and a drift specific gyro. Gyros are a necessity on rear wheel drive drift cars as they allow the driver to achieve true-to-scale door to door drift action. The included Hexfly GX-1 gyro automatically countersteers the car, enabling it to maintain a smooth arc through drifts. The amount of automatic countersteer can be fine tuned by adjusting the amount of gain on the gyro. Competitive drifting is based on line, angle, and style. How close someone is to the ideal line, having maximum angle throughout the run, moving through the course quickly and having minimal corrections after committing to an angle are what judges look for. While this is mostly achieved by skill, it is also necessary to have a predictable drift car that is adjustable to your driving style. The RDS excels in this area with its lightweight carbon fiber based chassis and adjustability. Everything on the RDS is adjustable to suit the driver’s needs, including camber, caster, toe, ackerman, roll center, wheelbase and center of gravity. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can be used to adjust the amount of traction and chassis roll the RDS has on different surfaces. Being able to fine tune ackerman is important in drifting as it directly affects corner speed. The RDS has multiple steering link positions and a sliding ackerman plate, making it easy to fine tune ackerman. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers. The included RDS body not only looks amazing, but it is ready to accept an LED light kit. LED light kits are sold separately. The RDS has front and rear light buckets that are ready to accept four LED lights in the rear and two up front. Whether it’s day or night, the RDS looks trick. While the RDS is an advanced competition spec drift car, it is also a perfect choice for beginners and is already set up out of the box for polished concrete and p-tile surfaces. This means someone learning to drift can open up the RDS and start practicing with the factory settings. We are releasing several how-to videos that include beginner drifting, advanced drift techniques, initial vehicle setup, advanced chassis tuning and understanding how drift competitions work. These videos are hosted by a seasoned drifter who owns and operates one of the largest drift tracks in the US. He will share his wealth of drifting knowledge to help you become more confident and competitive with your new RDS competition spec drift car, regardless of your current skill level. Whether you’re a novice or a pro, check out the all new RDS competition spec rear wheel drive drift car today. Specifications RDS: Fully Assembled with Electronics and Radio Gear Electronics: 540 3300kv Brushless Motor / 60A Brushless ESC / GX-1 Drift Gyro Steering Servo: Hexfly Coreless Drift-Spec Digital Servo. Radio: 2.4GHz radio system Chassis: Carbon Fiber Upper and Lower Deck Drive System: 2-Wheel-Drive Transmission: Single-Speed with 3 Motor Positions For Adjusting CG & Weight Bias Length: 445mm Stock Wheelbase: 253mm - 261mm Adjustable, Stock is 257mm Suspension: 4 Coil Over Shocks / Sliding Adjustable Ackerman Wheels: 6-Spoke Rims with Scale Wheel Nut Covers Needed to Complete 4 AA Batteries for Transmitter Battery and Charger for vehicle NOTE: The depicted decals and battery shown in the photo are for illustrative purposes only. The RDS you receive will require the decals to be added. The battery is sold separately. Redcat recommends the user checks the steering endpoints through the drift gyro prior to use. Please check with the user manual to perform this. This product was added to our catalog on February 10, 2023

Read more less

PRODUCT FEATURES 1964 Chevrolet Impala SS - Fully Functional Hopping Lowrider Expertly designed and engineered, the Redcat SixtyFour hopping lowrider captures the 1964 Chevrolet Impala SS in a classic highly-detailed, fully-functioning 1:10 scale Remote Control Car. The SixtyFour was designed from the ground up with the lowrider, auto enthusiast and R/C scaler communities in mind. Every detail of the SixtyFour was painstakingly and passionately created with scale accuracy and detail. The Impala SS interior and exterior badging adorn the 1964 Impala SS body and interior. 23 individual chrome plated molded parts are used to create the body’s accessories. Optional LED lights are available for night time cruising. Clear windows feature high quality chrome foil trim to complete the ultra-realistic appearance. The attention to detail continues below the body, with the chassis frame, faux transmission and functional solid rear axle with removable differential cover. The SixtyFour is designed for slow cruising and performing tricks that you can only do with special hydraulically actuated suspensions. Using specialty servos and precision weight bias, it replicates the driving style and overall look of a full sized lowrider / hopper. Vehicle Features • Officially licensed and highly detailed 1964 Chevrolet Impala SS body • Scale 14 inch spoked wheels • Detailed chrome injection molded trim • LED light kit ready Mechanical Features • Patented vehicle hopping system – U.S. Patent No. 11,083,973 • Real-time adjustable ride height • Ultra fast custom made REEFS RC Hopping Servo • Two 25KG rear axle height adjustment servos Radio Features • 6-Channel LR6X Radio control with lowrider style switches • Individual switches for each of the 3 height adjustment servos • Momentary switches for raising either the front or rear to max ride height / hopping • Momentary buttons for lowering either the front or rear to minimum ride height

Read more less

RER16205, Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit The Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit offers a highly adjustable and high performance drift platform, whether your a veteran drifter or just starting. Using a competition inspired design the RDS platform provides a solid base with the ability to fine tune the driving characteristics to your liking. By using premium features such as a carbon fiber chassis, adjustable motor positions, multiple shock mounting locations and a plethora of suspension geometry adjustments it's easy to see how the RDS is a must have for the drift enthusiast. Designed with competition in mind by the seasoned drift drivers, the RDS has been developed to give you the edge you need at the track. Through rigorous testing Redcat was able to specifically cater the RDS platform to excel on prepped surfaces such as P-Tile and polished concrete as most drift tracks will use these surfaces. With that in mind the RDS design can easily adapt to less than ideal surfaces such as unpolished concrete or asphalt with it's incredible amount of chassis adjustments.  The RDS chassis is completely adjustable allowing the user to fine tune the chassis to best suit your driving style and surface. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can adjust the amount of traction and chassis roll the RDS has on different surfaces. The RDS has multiple steering link positions and a sliding Ackermann plate, making it easy to fine tune the Ackermann. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers. NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Competition spec drift car chassis Adjustable camber, caster, toe, Ackermann, roll center, wheelbase, and center of gravity Adjustable motor mount with high, mid and low positions Includes carbon fiber chassis, front and rear shock tower, and top deck Accepts 2S Shorty packs or 2S Stick packs HDPE drift tires with scale nut covers Specifications: Length: 445mm Wheelbase: 253mm - 261mm Adjustable Suspension: 4 Coil Over Shocks / Sliding Adjustable Ackermann Wheels: 6-Spoke Rims with Scale Wheel Nut Covers Tires: HDPE Drift Tires Includes: (1) Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit Needed to Complete: Steering Servo 2 Channel Radio System 540 Size Motor ESC Drift Gyro Body (200mm wide, 253-261mm wheelbase) Battery (2S LiPo shorty pack recommended) Compatible Charger This product was added to our catalog on February 14, 2023

Read more less

PRODUCT FEATURES Are you ready for an adrenaline explosion? Fast and powerful, the Redcat Racing Volcano EPX is equipped with a 19T brushed 550 electric motor, waterproof electronic speed controller (ESC) and, thanks to its large aggressive tires, the traction needed to put all that power to the ground. The lightweight molded plastic chassis is designed to be durable, while providing a low center of gravity for high speed off road action. Speaking of durability, the Volcano EPX utilizes a 4WD shaft driven drivetrain with steel dogbone axles, and eight aluminum capped oil filled shocks. The Volcano EPX is fully adjustable and upgradeable. The shocks can be tuned with the included preload spacers or, for even more tuning options, you can buy different weight oils and springs . Tunable sealed differentials, and four wheel independent suspension, allow the driver to get loads of traction, on a multitude of surfaces. The Volcano EPX is also equipped with adjustable metal turnbuckles, so camber and toe angle can be fine tuned for the best performance possible. The Volcano EPX monster truck is a completely tunable hobby grade RC monster truck and comes pre-tuned for most driving situations. Many custom aftermarket parts are available for the Volcano EPX monster truck. These aftermarket parts include color anodized machined aluminum as well as many other performance options. Volcano EPX is erupting with excitement. Get yours today! • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum capped oil filled shocks, front and rear gear differentials. • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle. • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout. • 19T brushed 550 electric motor with heat sink, Waterproof ESC, Waterproof high torque steering servo, 2.4GHz radio system. • Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH Battery & NiMH Charger - Requires 4-AA Batteries for Transmitter

Read more less

RER21925, Redcat 1/10 Scale Custom Car Hauler Trailer Introducing the meticulously crafted 1/10 scale Custom Trailer, a true masterpiece in vehicle transport. This precisely scaled trailer is designed to carry 1/10 scale vehicles and can be easily towed by a wide range of popular 1/10 scale RC vehicles. It comes complete with a universal tow hitch and an additional hitch specifically tailored for use with the Redcat Custom Hauler. Built to impress, the Custom Trailer has the capacity to carry 1/10 scale vehicles weighing up to 20lbs. Its robust steel c-channel frame rails, heavy duty leaf springs, and scale-inspired heavy duty tires with attractive chrome wheels ensure durability and style. The trailer is rich in details, featuring functional components such as a storage box, a rotating jack stand, extendable loading ramps, adjustable wheel chock blocks, and tie-down straps. When not in use, all accessories can be conveniently stored on the trailer, maintaining a neat and organized appearance. Moreover, the Custom Trailer is ready to illuminate your RC experience with fourteen LED-ready light buckets, allowing for effortless integration of an optional LED light kit (sold separately). Elevate your RC transport with this exceptional trailer designed for both functionality and aesthetic appeal. Features: Designed to carry 1/10th scale RC vehicles up to 20lbs. Anti-skid bed surface with wheel chocks & four tie-down straps. Adjustable loading ramps can be stored when not in use. Easy-load battery box is hidden in the bed. Extremely detailed and versatile components Scale heavy duty tires with stylish chrome wheels Heavy Duty steel C-Channel frame rails for extreme rigidity & strength Heavy Duty leaf springs Accepts up to 14 LED lights (LED lights sold separately) This product was added to our catalog on October  16, 2023

Read more less

PRODUCT FEATURES Shocks (Gun Metal)(2pcs) Fits Ground Pounder models

Read more less