AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires. The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!  Features: Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Specifications: Height: 4.625" (117 mm) Front Track: 3.938 in (100.0mm) Width: 3.875" (98 mm) Rear Track: 3.938 in (100.0mm) Wheelbase: 5.19" (132 mm) Length: 8.75" (222 mm) Includes: (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete: Everything you need to drive is included This product was added to our catalog on April 22, 2022

Read more less

AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward. The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter! Features: Includes radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Specifications: Approximate Assembly Time: No assembly required Batteries: 7.4V 350mAh 30C LiPo Body: Painted and trimmed Axial Deadbolt Charger: USB LiPo charger Chassis: Stamped steel rails Completion Level: Ready-To-Run Differential: Worm gear 16T/4T Drivetrain: 4WD Gear Pitch: 32-Pitch Ground Clearance: 1.06" (27mm) Height: 4.73" (120.2mm) Length: 7.8" (199.5mm) Motor Size: 180 Motor Type: Brushed Pinion: 10T Radio: AX-4 2.4GHz 2-channel Servos: AS-1 steering servo Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm) Size/Scale: 1/24 Speed Control: AE-6 ESC receiver/combo Spur Gear: 55T Suspension: Solid axle, front and rear Tire Diameter: 2.0" (51mm) Tire Tread: Nitto Trail Grappler M/T, large block tread Track: 3.9" 99.5mm) Vehicle Type: Crawler Water-Resistant: No Weight: 0.5lb (0.22kg) Wheel Diameter: 1.0" (26mm) Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl Wheel Width: 0.48" (12.4mm) Wheelbase: 5.25" (133.5mm) Width: 3.9" (99.5mm)   Includes:  (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 2-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Needed to Complete: Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! This product was added to our catalog on May 29, 2019

Read more less