PTK-130T, ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage) This is the ProTek R/C 130T Digital Hi-Torque Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support. The ProTek R/C 130T High Voltage Hi-Torque servo delivers an incredible 288 oz-in of torque with a 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 355 oz-in and 0.08! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency. Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back. Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty. Features: Ideal for any 1/10 to 1/8 scale vehicle application Aluminum middle case High voltage circuitry 0.10 transit speed, and 288 oz-in of torque @ 6.0V 0.08 transit speed, and 355 oz-in of torque @ 7.4V Aluminum single arm servo horn Full metal gears and dual ball bearings 200mm long 22awg connector wire w/gold plated connectors Coreless motor Servo Model 130T Recommended Application 1/10 to 1/8 scale surface Operating Voltage 4.8V - 7.4V Operating Temperature 14° to 140° F (-10 to +60° C) Operating Speed @ 6.0V 0.10/60° sec Operating Speed @ 7.4V 0.08/60° sec Dynamic Torque @ 6.0V 288 oz-in (20.7 kg-cm) Dynamic Torque @ 7.4V 355 oz-in (25.6 kg-cm) Motor Type High Efficiency Coreless Motor Output Shaft 25 Tooth Gears Metal Weight 61g Pulse/Frequency 1520?s / 333hz This product was added to our catalog on December 16, 2021

Read more less

PTK-160TBL, ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.  A black anodized aluminum case with aluminum and gold accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. An aluminum, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.   NOTE: If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.  Features: Used by Ryan Maifield to win the 2019 Roar 4wd Off-Road National Championships Ideal for any 1/10 to 1/8 surface application that can benefit from a low profile configuration Full aluminum black anodized case High voltage circuitry 0.08 transit speed, and 230 oz-in of torque @ 6.0V 0.06 transit speed, and 290 oz-in of torque @ 7.4V Includes aluminum single arm clamping servo horn and servo mounting washers for a rock solid installation 140mm long servo lead Full metal gears and dual ball bearings Brushless motor Servo Model 160TBL Recommended Application 1/10 to 1/8 Scale Surface Operating Voltage 4.8V - 7.4V Operating Temperature 14° to 140° F (-10 to +60° C) Operating Speed @ 6.0V 0.08/60° sec Operating Speed @ 7.4V 0.06/60° sec Dynamic Torque @ 6.0V 230 oz-in (16.5 kg-cm)  Dynamic Torque @ 7.4V 290 oz-in (20.9 kg-cm) Motor Type Brushless Output Shaft 25 Tooth Gears Metal Weight 55g Pulse/Frequency 1520?s / 333hz Dimensions 39.5x20x30.6mm Length (Bottom to Mount) 19.35mm This product was added to our catalog on May 23, 2023

Read more less

PTK-160T, ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case This is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support. The ProTek R/C 160T High Voltage Low Profile servo delivers an incredible 216 oz-in of torque and 0.08 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 274 oz-in and 0.06! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor. Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back. Features: Low-Profile case saves space and weight Ideal for any 1/12 to 1/10 scale vehicle application Full aluminum case High voltage circuitry 0.08 transit speed, and 216 oz-in of torque @ 6.0V 0.06 transit speed, and 274 oz-in of torque @ 7.4V Aluminum single arm servo horn Full metal gears and dual ball bearings 160mm long 22awg connector wire w/gold plated connectors Coreless motor Servo Model 160T Recommended Application 1/12 to 1/10 scale Surface Operating Voltage 4.8V - 7.4V Operating Temperature 14° to 140° F (-10 to +60° C) Operating Speed @ 6.0V 0.08/60° sec Operating Speed @ 7.4V 0.06/60° sec Dynamic Torque @ 6.0V 216 oz-in (15.5 kg-cm) Dynamic Torque @ 7.4V 274 oz-in (19.7 kg-cm) Motor Type High Efficiency Coreless Motor Output Shaft 25 Tooth Gears Metal Weight 54.5g Pulse/Frequency 1520?s / 333hz Dimensions 39.5x20x30.3mm Length (Bottom to Mount) 19.10mm This product was added to our catalog on December 16, 2021

Read more less