Hot Racing
Hot Racing HRASTRXF332C, Hot Racing TRX4 Stainless Steel Center Skid Plate Armor
HRASTRXF332C, Hot Racing TRX4 Stainless Steel Center Skid Plate ArmorThis product was added to our catalog on December 16, 2021
$14.99
Hot Racing HRASXTF133HA01, Hot Racing Axial SCX24 Deadbolt Aluminum High Clearance Links Set (133.5mm)
HRASXTF133HA01, Hot Racing Axial SCX24 Deadbolt Aluminum High Clearance Links Set (133.5mm)This product was added to our catalog on December 16, 2021
$37.99
Hot Racing HRASSLG52M1, Traxxas Sledge Steel Spur Gear (52T 1 Mod)
HRASSLG52M1, Traxxas Sledge Steel Spur Gear (52T 1 Mod) This product was added to our catalog on October 20, 2022
$39.99
Hot Racing HRASXTF133HFJ01, Hot Racing Axial SCX24 Aluminum High Clearance 4 Link Set (133.7mm)
The Hot Racing Axial SCX24 Aluminum High Clearance 4 Link Set is an optional link kit intended for the Axial SXC24 133.7mm wheelbase platform and converts the front axle to a true 4 link setup. This Hot Racing link set adds strength, clearance and precision to an already capable crawler.NOTE: The 133.7mm wheelbase link set is compatible with vehicles that use the AXI204000. Features: 6061 CNC T6 Black anodized aluminum link for ultimate durability Replaces stock plastic links EZ Replacement chrome Ball Includes: (2) Front High Clearance Links lower links (2) Upper 4-links (2) Rear High Clearance Links lower links (2) Rear upper 4-links Mounting Hardware
$33.99
Hot Racing HRATE125, Hot Racing Differential Lock Hub Spool (Slash/Rustler/Stampede 2WD)
HRATE125, Hot Racing Differential Lock Hub Spool (Slash/Rustler/Stampede 2WD)This product was added to our catalog on December 16, 2021
$13.99
Hot Racing HRASLF25SH06, Hot Racing Traxxas Slash/Stampede 4x4 Aluminum Lock Servo Arm (25T)
HRASLF25SH06, Hot Racing Traxxas Slash/Stampede 4x4 Aluminum Lock Servo Arm (25T)This product was added to our catalog on December 16, 2021
$10.99
Hot Racing HRATRXM51DP08, Hot Racing Traxxas TRX-4M Threaded Aluminum Shocks (Black) (4)
HRATRXM51DP08, Hot Racing Traxxas TRX-4M Threaded Aluminum Shocks (Black) (4) This is the Hot Racing Traxxas TRX-4M Threaded Aluminum Oil Dampened Shocks Set. This set of pre-assembled optional shocks is intended for use with the Traxxas 1/18 TRX-4M to replace the stock composite shocks for smoother more consistent damping. These shocks feature a threaded aluminum body for more tuning and adjustment, Stainless steel shock shafts and bleeder screws for easy shock maintenance. Features: CNC machined 6061-T6 shock bodies, caps, collars, and spring retainers Oil dampened shocks with rubber bladders Bleeder screws for easy shock maintenance Threaded shock bodies for fine tuning of shock preload Stainless steel shock shafts Two spring sets: black (soft) and silver (stiff) Perfect fit for Trx-4M Specifications: Application: Traxxas TRX-4M 1/18 Scale Crawlers Length: 51mm Includes: (4) Assembled shocks (2) Sets of springs (8) 2.5x12mm button head cap screws (8) Aluminum shock eye bushings Needed to Complete: Silicone shock oil This product was added to our catalog on March 20, 2023
$43.99
Hot Racing HRATRXM21H, Hot Racing Traxxas TRX-4M Brass Steering Knuckle (2) (19.4g) (For Bearing Use)
HRATRXM21H, Hot Racing Traxxas TRX-4M Brass Steering Knuckle (2) (19.4g) (For Bearing Use) Hot Racing Traxxas TRX-4M Brass Steering Knuckle. These steering knuckles are intended for the Traxxas TRX-4M, when equipped with the optional bearing kit. Made from CNC Machined brass, these help to lower the Center of Gravity (CG) to help keep your truck planted. Package includes two brass steering knuckles. NOTE: Due to the tight tolerances for bearings, factory bushings may not fit. Features: Made from CNC Machined brass Lowers CG to increase stability and front weight bias This product was added to our catalog on February 1, 2023
$28.99
Hot Racing HRASLF1006, Hot Racing Traxxas Slash 4x4 Aluminum Locking 12mm Wheel Hex Kit (Blue)
HRASLF1006, Hot Racing Traxxas Slash 4x4 Aluminum Locking 12mm Wheel Hex Kit (Blue)This product was added to our catalog on December 16, 2021
$14.99
Hot Racing HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit)
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit) This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts Black oxide coated gear for durability and corrosion resistance Purple anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 18T/56T Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 18 tooth 32 pitch (0.8 Mod) pinion gear (1) 56 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) purple anodized countersunk washers (1) pinion adapter sleeve (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on March 16, 2021
$25.99
Hot Racing HRASPN1000E, Hot Racing Brass Prop Set w/Bullet Nut/Drive Dog M41
HRASPN1000E, Hot Racing Brass Prop Set w/Bullet Nut/Drive Dog M41This product was added to our catalog on December 16, 2021
$49.99
Hot Racing HRASXTF32TD02, Hot Racing Axial SCX24 32mm Internal Spring Air Shocks (Black)
HRASXTF32TD02, Hot Racing Axial SCX24 32mm Internal Spring Air Shocks (Black)This product was added to our catalog on December 16, 2021
$30.99
Hot Racing HRASTE282RP, Hot Racing Traxxas Slash Steel CV Drive Shafts
HRASTE282RP, Hot Racing Traxxas Slash Steel CV Drive Shafts The Hot Racing Traxxas Slash Steel CV Drive Shafts are an excellent way to increase the reliability of your Traxxas Slash 2wd. Made with high strength steel these shafts offer higher strength over the stock plastic shafts along with smoother operation due to the CV (constant velocity) joint. Package includes two assembled steel CV drive shafts and two differential drive cups. This product was added to our catalog on May 16, 2021
$36.99
Hot Racing HRALTN1901, Hot Racing LaTrax Rally/Teton Aluminum Hub Carrier Set (Black)
HRALTN1901, Hot Racing LaTrax Rally/Teton Aluminum Hub Carrier Set (Black) This product was added to our catalog on December 16, 2021
$18.99
Hot Racing HRATRXF03EMR01, Hot Racing Traxxas TRX-4 Aluminum Front Bumper w/Winch Mount & Light Buckets
HRATRXF03EMR01, Hot Racing Traxxas TRX-4 Aluminum Front Bumper w/Winch Mount & Light Buckets This product was added to our catalog on December 16, 2021
$49.99
Hot Racing HRASTRXF49M08, Hot Racing TRX4 Stainless Steel Offset Steering Tie Rod
HRASTRXF49M08, Hot Racing TRX4 Stainless Steel Offset Steering Tie RodThis product was added to our catalog on December 16, 2021
$9.99
Hot Racing HRASDP868X01, Hot Racing Shock Shaft & Ball End Multi-Function Pliers
HRASDP868X01, Hot Racing Shock Shaft & Ball End Multi-Function Pliers These are the Hot Racing Shock Shaft and Ball End Multi-Function Pliers. Features: CNC machined aluminum construction will not scratch hardened shock shafts Ergonomic grip design Black anodizing for durability, corrosion resistance, and great looks Accommodates numerous shock shaft or shock body sizes Integrated shock end ball installer helps with shock dis-assembly and maintenance Specifications: Length: 6 inch (152mm) Width: 2 inch (51mm) Thickness: 0.37 inch (9.5mm) This product was added to our catalog on May 23, 2021
$23.99
Hot Racing HRAXMX48M06, Hot Racing Traxxas X-Maxx Aluminum Steering Servo Saver Bellcrank
HRAXMX48M06, Hot Racing Traxxas X-Maxx Aluminum Steering Servo Saver Bellcrank The Hot Racing Aluminum Steering Servo Saver Bellcrank is an adjustable aluminum steering bellcrank and servo saver for the Traxxas X-Maxx. Features: Super-tough, fully adjustable servo saver bell crank Replaces factory plastic for a stronger-than-standard stock steering system CNC machined aluminum construction Reuses factory ball bearings for smooth operation Retains stock double shear design for ultimate reliability Adjustable servo saver springs for different tension Two servo saver springs to suit preference. Black (installed) is same as stock Traxxas, silver is stiffer then stock Anodized blue and black for durability, corrosion resistance, and aesthetics Includes: (1) assembled steering bellcrank (1) aluminum draglink (1) silver hard stiffness servo saver spring (1) black medium stiffness servo saver spring NOTE: Requires use of the stock bearings and some of the stock hardware Recommended to use removable-type thread lock on any screws threading into metal Optional use of a grease lubricant on servo saver cam surfaces can smooth servo saver action and prolong life Replaces most of Traxxas TRA7746 steering components Replacement Hot Racing draglink is part number HRAXMX4906 Aluminum servo horn is Hot Racing HRAXMX48A06 This product was added to our catalog on September 6, 2021
$70.99
Hot Racing HRABWP39T02, Hot Racing 1/10 Body Clip Retainers (Red) (4)
HRABWP39T02, Hot Racing 1/10 Body Clip Retainers (Red) (4)This product was added to our catalog on December 16, 2021
$3.99
Hot Racing HRASTE874, Hot Racing Traxxas 48P Hardened Steel Spur Gear (74T)
HRASTE874, Hot Racing Traxxas 48P Hardened Steel Spur Gear (74T) This product was added to our catalog on December 16, 2021
$19.99
Hot Racing HRASXTF18SS, Hot Racing Axial SCX24 Stainless Steel Modify Motor Plate
HRASXTF18SS, Hot Racing Axial SCX24 Stainless Steel Modify Motor Plate The Hot Racing Axial SCX24 Stainless Steel Modify Motor Plate is an optional motor plate that is a drop in upgrade for the stock parts. This motor plate fits the stock motor, as well as larger 050 size motors. Features: CNC machined stainless steel Motor plate Includes holes for mounting stock or 050 motor Motor list: 030 motor DYNS1217 050 Motor Hot Racing HRASXTF50M11 Barrage motor DYNS1203 This product was added to our catalog on December 16, 2021
$8.99
Hot Racing HRASXTF282P01, Hot Racing Axial SCX24 70mm LED Light Bar
HRASXTF282P01, Hot Racing Axial SCX24 70mm LED Light BarThis product was added to our catalog on December 16, 2021
$16.99
Hot Racing HRASLG156AX01, Aluminum bleeder shock caps Traxxas Sledge
HRASLG156AX01, Aluminum bleeder shock caps Traxxas Sledge This product was added to our catalog on December 1, 2022
$23.99
Hot Racing HRAERVT37CC, Center Drive CV Splined Shaft, for Traxxas E-Revo, E-Revo 2.0, & Summit
HRAERVT37CCCenter Drive CV Splined Shaft, for Traxxas E-Revo, E-Revo 2.0, & Summit Hot Racing optional upgrade heavy duty Center Drive Cv Splined Shaft E-Revo, E-Revo 2 Summit. Features: CNC machined #45 hardened carbon steel and Aluminum construction Replaces factory plastic drive axles Hard Black Anodized Aluminum Slider Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Black finish #45 Steel Rubber dust boot to keep the Splined Drive for maximum protection against the elements
$54.99
Hot Racing HRARVO5095, Hot Racing High Lift Shock Springs, Chrome 15lb/in, 2pcs, for Traxxas GTR Shocks
HRARVO5095, Hot Racing High Lift Shock Springs, Chrome 15lb/in, 2pcs, for Traxxas GTR Shocks Hot Racing extra-lift cold-coiled shock springs for the Traxxas E-Revo, Revo 3.3, Slayer Pro 4X4, and Summit. These springs are approximately 5mm longer than the stock springs to help compensate and raise the vehicle after adding heavy duty upgrades or high capacity batteries. Adding these springs will add 5 to 10 percent more ground clearance to the vehicle, depending on the vehicle components installed. This product was added to our catalog on December 16, 2021
$6.99
Hot Racing HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff. Traxxas Slash 4x4 Traxxas TRX-4 This product was added to our catalog on December 16, 2021
$14.99
Hot Racing HRASTE260, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Red) (18T/60T)
HRASTE260, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Red) (18T/60T)This product was added to our catalog on December 16, 2021
$25.99
Hot Racing HRATUDR88SLS108, Hot Racing 108mm Traxxas Unlimited Desert Racer Rear Suspension Travel Limit Strap (2)
HRATUDR88SLS108, Hot Racing 108mm Traxxas Unlimited Desert Racer Rear Suspension Travel Limit Strap (2) This is a pack of two optional Hot Racing 108mm Rear Suspension Travel Limit Strap intended for use with the Traxxas UDR. Hot Racing scale functional suspension limit straps limit suspension travel for Traxxas UDR Limit straps are used to take stress off shocks and to control suspension extension. when crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and the vehicle from rolling, all while keeping suspension articulation intact. From climbing, to droop control, to super scale looks, these limit straps will get you further and get you noticed! Features: Woven 2-ply Nylon fabric strap material CNC machined aluminum clevis buckles, anodized Red in color Specifications: Eyelet hole size: 3.3mm (0.13 inch) - for a 3mm screw NOTES: These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks Tested on extreme off-road terrain Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm This is the replacement of TRA8548 This product was added to our catalog on December 16, 2021
$16.99
Hot Racing HRASPN1000ME, Hot Racing Traxxas Spartan/M41 Pro Brass Prop w/Nut & Drive Dog (Brass/Blue)
HRASPN1000ME, Hot Racing Traxxas Spartan/M41 Pro Brass Prop w/Nut & Drive Dog (Brass/Blue) This is an optional Hot Racing 42x63mm Polished Brass Propeller, intended for use with the Traxxas DCB M41 and Spartan boats as a replacement for the stock plastic part. This part has been machined out of polished brass and includes an aluminum conical M4 propeller nut and drive dog, both anodized blue for added strength and style. Features: CNC machined from polished brass Anodized blue CNC machined Aluminum conical prop nut and drive dog Replaces factory plastic propeller Replaces factory hex nut with hydro dynamically efficient conical nut for reduced drag Specifications: Prop diameter: 42mm (1.65 inches) Prop pitch: 63mm (2.48 inches) Weight: 9g (0.32 oz) Prop nut length: 18.3mm (0.72 inch) Prop nut diameter: 8mm (0.31 inch) Includes: (1) CNC brass prop (1) Aluminum bullet prop nut (1) Aluminum drive dog (1) stainless steel setscrew This product was added to our catalog on July 23, 2021
$55.99
Hot Racing HRAXMX09M06, Hot Racing Traxxas X-Maxx Aluminum Rear Tie Bar Mount
HRAXMX09M06, Hot Racing Traxxas X-Maxx Aluminum Rear Tie Bar MountThis product was added to our catalog on December 16, 2021
$34.99
Hot Racing HRASPN1000H, Hot Racing Traxxas M41/Spartan Propeller Set w/Bullet Nut
HRASPN1000H, Hot Racing Traxxas M41/Spartan Propeller Set w/Bullet NutThis product was added to our catalog on December 16, 2021
$80.99
Hot Racing HRASXTF030H01, Hot Racing Axial SCX24 030 Motor Heat Sink (Black)
HRASXTF030H01, Hot Racing Axial SCX24 030 Motor Heat Sink (Black)This product was added to our catalog on December 16, 2021
$8.99
Hot Racing HRASXTF326RX04, Hot Racing Axial SCX24 Aluminum Threaded Oil Emulsion Shocks (4)
HRASXTF326RX04, Hot Racing Axial SCX24 Aluminum Threaded Oil Emulsion Shocks (4) Hot Racing Axial SCX24 Aluminum Threaded Oil Emulsion Shocks are a great upgrade for the Axial SCX24, or other mini/micro size crawler. These shocks are oil damped, requiring filling of silicone oil, and feature a machined faux reservoir shock cap for realistic scale looks. Features: Machined aluminum construction Threaded shock bodies for quick pre-load adjustments Scale-looking reservoir (non-functioning; for scale only) Three spring rates included Replaces Axial AXI31612 SCX24 shock set Reservoir is for aesthetics only and is non-functional NOTE: Silicone shock should be only fully filled 80% with shock shaft compress 80%. Mount with wide flange outward to retain O-rings. Specifications: Extended length eye-to-eye: ~32.5mm Compressed length eye-to-eye: ~23mm Stroke: 7.5mm Includes: (4) Shocks (4) Ex Firm Spring (Gold) (4) Soft Springs (black) (4) Firm Springs (silver) This product was added to our catalog on December 16, 2021
$30.99
Hot Racing HRASSLG889D, Mod 1 SS Motor Fix Mount Washer Sledge
Mod 1 SS Motor Fix Mount Washer Sledge
$9.99
Hot Racing HRASERVO268, Hot Racing 32P/0.8M Hardened Steel Spur Gear (Black) (68T)
HRASERVO268, Hot Racing 32P/0.8M Hardened Steel Spur Gear (Black) (68T)This product was added to our catalog on December 16, 2021
$23.99
Hot Racing HRATD90X06, Hot Racing 90mm Aluminum HD Big Bore Shock Set (2)
HRATD90X06, Hot Racing 90mm Aluminum HD Big Bore Shock Set (2)This product was added to our catalog on December 16, 2021
$29.99
Hot Racing HRATRXF03WRA01, Hot Racing Traxxas TRX-4 Aluminum Rear Bumper
HRATRXF03WRA01, Hot Racing Traxxas TRX-4 Aluminum Rear BumperThis product was added to our catalog on December 16, 2021
$39.99
Hot Racing HRASVXS848, Hot Racing Steel Spur Gear (Traxxas 1/16) (48T)
HRASVXS848, Hot Racing Steel Spur Gear (Traxxas 1/16) (48T)This product was added to our catalog on December 16, 2021
$18.99
Hot Racing HRASRVO438, Hot Racing Revo 3.3 Heavy Duty Mod 1 Steel Spur Gear (38T)
HRASRVO438, Hot Racing Revo 3.3 Heavy Duty Mod 1 Steel Spur Gear (38T)This product was added to our catalog on December 16, 2021
$23.99
Hot Racing HRATD105X06, Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks (2)
HRATD105X06, Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks (2) This is a pack of two Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks. These Hot Racing 105mm big bore threaded body aluminum shocks are for use with many Traxxas and other 1/10 scale off-road vehicles using 105mm length shocks. Features: CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers "Big Bore" threaded shock bodies CNC machined 11mm Delrin pistons 3.5mm stainless steel shock shafts Gunmetal and blue anodized aluminum components Vented shock caps with bladder seals for consistent rebound dampening Threaded shock collars with o-rings to prevent unwanted movement Composite plastic lower shock ends with aluminum balls Fully assembled, just add shock oil and bleed Specifications: Extended length: 105mm Compressed length: 75mm Overall length: 115mm Diameter: 19mm Spring: ~5.8lb/in, 1.54mm wire, 14 turn dual rate, 19.3mm OD, 72mm long Includes: (2) assembled shocks (2) M3x20mm flat head cap screws (2) M3x18mm button head cap screws (2) 3mm countersunk washers (2) 5.9 hollow balls (4) 1.5mm thick spacers (4) 3mm thick spacers Requires: Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal Snap ring pliers when rebuilding lower seal NOTES: Use spacers as need for installation Can be used with optional Hot Racing springs: SLF63FS261 (progressive), SLF63MR268 (linear), SLF63RS286 (progressive) Accepts optional Hot Racing silicone shock boot RDP34201 Replacement parts are Hot Racing: RTD910BN (shock ends), RTD910RB (pistons and o-rings), RTD1010X (bladders and lower seals) This product was added to our catalog on May 20, 2023
$29.99
Hot Racing HRASXTF030H02, Hot Racing Axial SCX24 030 Motor Heat Sink (Red)
HRASXTF030H02, Hot Racing Axial SCX24 030 Motor Heat Sink (Red)This product was added to our catalog on December 16, 2021
$8.99
Hot Racing HRATRXM2401, Hot Racing Traxxas TRX-4M Aluminum Servo Mount (Black)
HRATRXM2401, Hot Racing Traxxas TRX-4M Aluminum Servo Mount (Black) Hot Racing Traxxas TRX-4M Aluminum Servo Mount. This optional servo mount uses CNC machined aluminum to provide a solid servo mounting solution for the Traxxas TRX-4M rock crawler. Using aluminum construction keeps this mount from flexing under high loads unlike the stock plastic mount. This mount is an easy upgrade giving your rig precise and consistent steering performance. Features: CNC machined 6061-T6 billet aluminum Secure servo mount over stock plastic mount Installs easily with no modifications Includes: (1) Traxxas TRX-4M Aluminum Servo Mount (2) Mounting Screws This product was added to our catalog on February 7, 2023
$14.99
Hot Racing HRASSLG889A, 1.5 Mod 11:34 SS Motor Fix Mount Washer Sledge
1.5 Mod 11:34 SS Motor Fix Mount Washer Sledge
$9.99
Hot Racing HRASSLG889B, Traxxas Sledge 1.5 Mod 13:34 SS Motor Fix Mount Washer
HRASSLG889B, Traxxas Sledge 1.5 Mod 13:34 SS Motor Fix Mount Washer This product was added to our catalog or updated on April 4, 2022
$9.99
Hot Racing HRASSLG889C, Traxxas Sledge Mod 1.5 and Mod 1 SS Motor Fix Mount Washer
HRASSLG889C, Traxxas Sledge Mod 1.5 and Mod 1 SS Motor Fix Mount Washer This product was added to our catalog or updated on April 4, 2022
$9.99
Hot Racing HRASSLG34M15, Steel Spur Gear (34T 1.5 Mod) Sledge
Steel Spur Gear (34T 1.5 Mod) Sledge
$43.99
Hot Racing HRAMTT10M01, 12mm Aluminum Hex system Mini-T B 2.0
12mm Aluminum Hex system Mini-T B 2.0
$18.99
Hot Racing HRASMTT288, Steel Universal Axles Drive Shafts : Losi Mini-T2
Steel Universal Axles Drive Shafts : Losi Mini-T2
$29.99
You have seen 96 out of 1069 products