Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller Features: Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages. A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC. Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors). Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time. Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately) Specifications: Application: 1/10th drift car Cont./Peak Current: 100A/800A Input Voltage: 2S LiPo/4-6S NiMH BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode) Wires & Connectors: 13AWG 200mm Programming device: LCD program box, OTA programmer (Available through Firmware update) Firmware: LCD Program box via USB software (PC only), OTA  (iOS / Android)  Size & Weight: 40.7x35.0x32.0mm (w/Fan) Weight: 95g (w/ wires) Motor Limit: 2S LiPo/6S NiMH ?8.5T Includes: (1) XD10 PRO ESC  (2) Input wires & (3) Output wires (PRE-SOLDERED) (1) cooling fan  Decals Bonus parts: heat tubes, double tape, nylon cable zap traps This product was added to our catalog on May 3, 2023

Read more less

HWA30404307, Hobbywing Quicrun 3650 G2 Sensored Brushless Motor (21.5T) The Hobbywing Quicrun 3650 G2 Sensored Brushless Motor is a high efficiency option, creating good power, and keeping temps low. Ideal for 1/10th, 1/12th On-road (Race or drift Touring cars, F1, M vehicles and etc.) & Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T,25.5T motors) applications. Features: Built-in Hall sensor brings drivers an amazing sense of control. Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings. Dustproof design where motor leads exit. Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections. Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor. Specifications: Turn: 21.5T Kv: 1800Kv LiPo: 2-3S Shaft Diameter: 3.175mm Resistance: 0.0747 ohm No Load Current: 1.3A Max Output Power: 95W Max Output Current: 28A Weight: 186g This product was added to our catalog on May 3, 2023

Read more less

HWA30401139, HobbyWing Xerun D10 Drift Brushless Motor (13.5T) (Purple) Features: Designed for Drift: The Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple. Banana Plug Quick-Swap Design: The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC. Stator Designed for Drift: The motor stator is optimized for drift and improves motor efficiency in drift applications. Built-in with high-precision sensors board, combined with drift-specific fan rotors, providing excellent motor linearity and drivability while greatly improves motor efficiency. Lightweight: The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (including 3 gold insert weights). The lightweight motor allows user to easily tweak their weight bias on their car. Fan Rotor: Providing great heat dissipation, power the special-shaped gold fan on the rotor heats the motor while making a pleasant sound, especially when Turbo is turned on. Best paired with XD10 PRO ESC  Specifications: Application: 1/10th Drift car Input Voltage: 2S Lipo KV: 2900kv Rotor: 2 POLE ?5-12.1*24.1-BES*-L3 Weight: 157 / 165 Can Size: 35.7xx52.6mm (1.41x2.07") Shaft Diameter: 3.175mm (0.125")  Shaft Length: 15.0mm (0.591") NOTE: To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices. The M3 screws with a length (no longer than 7mm) are needed when mounting the motor onto your vehicle. Please pay attention to the relevant marks (on the ESC) when soldering/connecting those output wires to the motor and make sure that you will strictly follow the wiring order (between the ESC & themotor) of “A-A, B-B, and C-C”. Please ensure the sensor cable is clean and undamaged when you’re using a sensor ESC. You need to pay attention to the two connectors on the cable when connecting the ESC to the motor. Re-check all the connections between the ESC & the motor and ensure that they are all correct before turning on the ESC. Timing Note: The D10 motors provide a wide range of adjustable mechanical timings, the following are the methods & principles you can follow when adjusting the timing. You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as needed according to the mark (white lines) at the rear end of the motor and fasten the screw after the adjustment. For obtaining optimal performance, you can change the output range and characteristics of your power system by adjusting the motor timing. Increasing the timing can increase the motor speed (RPM), while that also increases the motor temperature and reduces the efficiency. A high(er) timing usually requires a high(er) ratio. Please ensure your ESC is properly programmed before setting the motor timing. For detailed information about ESC programming, please refer to the user manual of the ESC. After the timing adjustment, please ensure that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the information about the motor temperature via a infra-red temperature gun. If the temperature is too high, please let the motor cool down first and then test again. If the temperature is still too high, then please reduce the timing or increase the FDR (that is to replace the pinion gear with fewer teeth or spur gear with more teeth). This product was added to our catalog on April 21, 2024

Read more less

HWI30404307, HobbyWing Quicrun 3650 G2 Sensored Brushless Motor (21.5T) The Hobbywing Quicrun 3650 G2 Sensored Brushless Motor is a high efficiency option, creating good power, and keeping temps low. Ideal for 1/10th, 1/12th On-road (Race or drift Touring cars, F1, M vehicles and etc.) & Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T,25.5T motors) applications. Features: Built-in Hall sensor brings drivers an amazing sense of control. Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings. Dustproof design where motor leads exit. Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections. Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor. Specifications: Turn: 21.5T Kv: 1800Kv LiPo: 2-3S Shaft Diameter: 3.175mm Resistance: 0.0747 ohm No Load Current: 1.3A Max Output Power: 95W Max Output Current: 28A Weight: 186g This product was added to our catalog on April 21, 2024

Read more less