Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

Fantom Racing

5 products


  • FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER

    Fantom Racing FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER

    Out of stock

    Have you ever been at a race and wondered how the top finishers seem to have faster motors than everyone else? One of the reasons for this is because the fast guys know how to tune their motors with different rotors.  Most motor companies now offer optional tuning rotors, but without a way to measure their magnetic strength, there is no way for you to know what strength rotor you are putting in your motor and therefore no way to fine-tune your motor correctly.  In addition, rotors are not all created equal.  Due to tolerances in the manufacturing process, some are better than others and the fast guys have figured this out.  Tuning your motor with the correct rotor is the most critical step in getting the maximum performance out of your motor. Do you know that the strength of your rotor has the single biggest effect on how your motor runs, yet most racers don’t even know what strength rotor they have in their motor?  This is like not knowing whether you have a 4, 6 or 8 cylinder engine in your real car.  This basically leaves you guessing at how to gear your car and where to set the motor timing.  Furthermore, without the correct rotor in your motor, your motor may never run up to its full potential for the application that it is being used for. Now, with the new FACTS MACHINE v3 rotor tester, this easy to use tool gives you the ability to accurately test the magnetic field strength of all of your rotors! No more guessing…get the “FACTS” and the edge over your competition with the FACTS MACHINE v3 Brushless Rotor Tester! IMPORTANT: It is important to know that there is no standard in the R/C industry for testing brushless rotors.  There are numerous testers on the market, including the Trinity, MMS, and others, that all provide different information.  This information can vary greatly.  For example, one company’s meter may read 1500 for a rotor, where our meter may read it as 1400.  The Fantom Facts Machine v3 is not mass produced, but rather is hand-built one at a time, in the U.S.A., to the highest standards in the R/C industry.  Also, the Facts Machine v3 calibration is double-checked for the highest accuracy possible, so you can feel confident that we are providing you with the most precise rotor tester in R/C. FEATURES: Precision Calibrated – Accurately Measures Magnetic Field Strength Of Brushless Rotors Works With Most Brand 540 Size Rotors and All Diameters (maximum length of 1.54 inches / 39mm) Displays The Highest Measurement For Both Poles At The Same Time Until The Unit Is Reset (eliminates having to memorize or having to write down each number) Lighted LCD Display – Reads Out To 4 Numeric Places (example: 1550) AC Powered – Includes 6v Wall Power Supply Laser Engraved Fantom Logo RoHS Compliant – Built With All Lead-Free Components And Solder Comes in a sturdy, foam padded storage box Hand Built In The USA! SPECS: DIMENSIONS: 4.17″ (106mm) L x 1.58″ (40mm) W x 0.72″ (18.4mm) H (1.18″ / 30mm H including standoffs) WEIGHT: 2.23 ounces (63.22 grams) This product was added to our catalog on September 10, 2021

    Out of stock

    $179.99

  • FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER

    Fantom Racing FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER

    Out of stock

    Introducing our latest motor testing tool, the Facts Machine 3S Precision Resistance / Inductance Meter!  This incredible new tool allows you to test both the resistance and inductance of your brushless motor!  This information is critical in knowing the performance capability of your motors. Did you know that knowing the inductance of your motor is just as important as knowing the resistance? Yet most racers don’t pay much attention to this.  Most racers are only concerned with getting the lowest resistance stator they can find, however, this is only half the equation in finding the best stator possible.  Inductance also plays a very important role in your motor’s performance.  The general rule of thumb is the combination of the lowest resistance and highest inductance produces the highest performance for R/C motors and the difference between these two numbers we call the “spread”.  Typically, the bigger the spread, the better the motor will perform.  For example, using common 17.5 turn numbers of 18.0 milliohms as the resistance number and 30.0 milliHenries as the inductance number, this is a spread of 12.  If you could find another 17.5, for example, with a spread of 12.5, this motor will run better on the track compared to the motor with the spread of 12.  Not knowing the “spread” basically leaves you guessing at what motor is truly best in your box. In addition, the Fantom Facts Machine 3S is not mass produced, but rather is hand-built one at a time, in the U.S.A., to the highest standards in the R/C industry.  The Facts Machine 3S calibration is double-checked for the highest accuracy possible, using 5% tolerance resistors and inductors, referenced to our shop Instek GOM-802 milliohm meter and Duoyi inductance meter, so you can feel confident that we are providing you with the most precise stator tester in R/C.  To purchase an Instek GOM-802 and quality inductance meter costs over $500, so the Facts Machine 3S is an incredible value for all serious racers. Now, with the new FACTS MACHINE 3S Resistance / Inductance Meter, you can test the two most important factors of your stator with one compact and easy to use tool! No more guessing…get the “FACTS” and the edge over your competition with the FACTS MACHINE 3S Brushless Motor Resistance / Inductance Meter! FEATURES: Precision Calibrated Using an Instek GOM-802 milliohm Meter (same as ROAR uses) and a Duoyi DY-4070G Inductance Meter Resistance Range: 0 to 999 milliohms Inductance Range: 0 to .999 milliHenries Displays both Resistance and Inductance Numbers, of all 3 poles, at the same time until the unit is reset (eliminates having to memorize or having to write down each number) Lighted LCD Display High-quality Mueller® Gold-plated resistance clips and high-quality Kelvin inductance clips Capable of testing each pole individually or two poles at a time AC Powered – Includes 6v Wall Power Supply 3D Printed Case with Fantom Logo Comes in a sturdy, foam padded storage box Hand Built In The USA! SPECS: DIMENSIONS: 2.85″ (72mm) L x 1.58″ (40mm) W x 0.72″ (18.4mm) H (0.78″ / 20mm H including screen) WEIGHT: 2.45 ounces (69.46 grams) This product was added to our catalog on September 10, 2021

    Out of stock

    $199.99

  • FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN

    Fantom Racing FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 3.5 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Red Optional Stationary End Plate: Red Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

  • FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN

    Fantom Racing FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 3.0 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Green Optional Stationary End Plate: Green Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

  • FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN

    Fantom Racing FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 4.0 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Orange Optional Stationary End Plate: Orange Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account