Electronics Cars & Trucks
Traxxas TRA3350R, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
TRA6814, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof) The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works. The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition. Traxxas’ exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineon powered adventure leads—the only limits are your imagination. Key Features: Now Waterproof Compatible with brushed, brushless and sensored brushless motors Auto-detects the motor type Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3cells) battery packs Built-in-two-stage low-voltage detection for LiPo battery packs 3 drive profiles:Sport Mode, Race Mode, and Training Mode Two-Stage Thermal shutdown protection Velineon 3500 Brushless Motor 10-Turn, 3500kV Optimized for extreme power and efficiency in 1/10 vehicles This product was added to our catalog on May 7, 2021
$179.99
Spektrum SPMXSEM0501, Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
SPMXSEM0501, Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv) This is the Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo. This powerful brushless combo is an excellent drop in brushless system for Mini vehicles such as the Losi Mini-T, Mini-B and Mini JRX2. This system contains a high-torque and high speed 6000kv brushless sensorless motor that is designed for bashing and sport racing applications. The motor features the same basic dimensions and mounting patterns as industry-standard, 1/16 to 1/18, 280-size brushed motors, making it easy to install and setup. These motors also offer high performance over a longer lifetime with little to no maintenance. Features: Drop-in brushless upgrade for Losi Mini-T, Mini-B and Mini JRX2 Integrated 20 amp ESC 2-in-1 design reduces space requirements EC2 connector that is compatible with popular battery types used in 1/18th scale models Perfect upgrade for brushed 280 motors with the same diameter Industry standard mounting hole patterns High torque and high RPM 6000kv Brushless Sensorless motor Counter-clockwise operation only Easy programming via one-button interface High-quality construction with ball bearings Hardened steel 2mm motor shaft Low maintenance design Easy installation Specifications: Input Voltage: 2S LiPo RPM/Volt (Kv): 6000 Motor Type: Brushless Maximum Burst Current: 40A Maximum Continuous Current: 20A Connector Type: EC2 BEC: Yes BEC Type: Switching BEC Continuous Current: 1A Motor Design: Inrunner Reverse: Yes Forward: Yes Auto Cutoff: Yes Overload Protection: Yes Shaft Diameter: 0.07" (2mm) Outer Diameter: 0.94" (24mm) Product Length: 1.41" (36mm) Includes: (1) Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv) (1) Product Manual This product was added to our catalog on December 12, 2022
$82.99
Traxxas TRA3355R, Traxxas VXL-3S Brushless ESC (Waterproof)
TRA3355R, Traxxas VXL-3S Brushless ESC (Waterproof) This is the Traxxas VXL-3S Brushless Electronic Speed Control. This Speed Control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored, or sensorless brushless motors. The VXL-3s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn. Traxxas exclusive patented Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use. The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty. Features: The VXL-3s auto-detects the motor type for brushless and sensored brushless motors. Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system. Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold. Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt) The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity. The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures. The VXL-3s is programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode**™ – 50% Fwd / Brake / 50% Rev More Features: Multi-color LED provides clear feedback Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail. Two-stage thermal shutdown protection protects the VXL-3s from overheating. Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound. Sensor Phase Detection™ protects against improperly wiring aftermarket sensored motors. Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC. Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded. Water resistant case design uses rubber seals and o-rings to protect against damage caused by water and moisture. Micro-fin aluminum heatsink dissipates heat. The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it. MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 (ohm)). Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance. Specifications: Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC); LiPo 2-3 Cells: (7.4 to 11.1 Volts DC) Case Size: 39mmW x 55mmD x 33mmH Weight: 90 grams Motor Limit (Brushed/Brushless): No motor limit On Resistance Forward: 0.00075 Ohms On Resistance Reverse: 0.00075 Ohms Peak Current - Forward: 320A Peak Current - Reverse: 320A Braking Current: 320A Continuous Current: 200A BEC Voltage: 6.0 V BEC Current: 2.5A (with 6-cell NiMH) Power Wire: 12-Gauge Maxx® Cable Input Harness Wire: 26 Gauge / 100mm Transistor Type: MOSFET Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Single-Button Setup: Yes, Traxxas EZ-Set® Battery Input Connector : Traxxas High-Current Connector Motor Types (Autodetect): Brushed, brushless, sensored brushless Ports: RX Input, motor sensor, auxiliary fan Documents and Resources for TRA3355R Traxxas VXL-3S Waterproof ESC Manual This product was added to our catalog on April 12, 2021
$99.99
Castle Creations CSE011-0135-00, Castle Creations B Link Bluetooth Adapter
CSE011-0135-00, Castle Creations B Link Bluetooth Adapter The Castle Creations B Link Bluetooth Adapter gives you access to powerful Castle Link ESC tuning features right from your iOS or Android smartphone! Castle Link is an essential component of customization for all Castle ESCs. While the controllers are plug and play, the benefits of fine tuning your Castle ESC through the Castle Link Programming Suite have only reinforced the sophistication and value of the Castle product line. Not only do you get the ability to adjust many variables to enhance your experience, you have the assurance that firmware updates for future features and improvements for your controller are provided at no cost to you. Discover just how easily and quickly you can reign in tuning with the release of the Castle B•LINK BLUETOOTH ADAPTER, which will allow most Castle Link compatible products to be programmed via Bluetooth enabled mobile devices using the free application, with firmware updating to be added soon. CASTLE LINK APP FEATURES:The Castle Link App contains all of the same tuning options as the Castle Link USB Programming Suite used on a Windows compatible PC, now with even greater flexibility. NOTE: All current Castle Creations ESCs, many older units and the BEC 2.0 and BEC Pro are supported, for a complete listing of compatible ESCs and accessories please view the PDF file in the resources tab above. App available for free at the Apple App Store and Google Play. Features: WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware. DATA LOG VIEWING allows the user to view and download data logs wirelessly, giving you the information needed to fine tune your setup. COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight. CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models. FREE APP DOWNLOAD is readily available in the Apple App Store or Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data. EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models. PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings. SYNC information between multiple devices by creating a free account (requires internet connection to sync database). Specifications: Input Voltage: Minimum: 4.5V - Maximum: 13V Max Continuous Current: 10A Maximum Burst Current: 20A Dimensions (with wires): 7.25" x 0.81" x 0.27" (184.15mm x 20.55mm x 0.27"mm) Dimensions (w/o wires): 1.20" x 0.81" x 0.27" (30.48mm x 20.55mm x 0.27"mm) Weight: 6.62gm / 0.015lbs Needed for Operation: Castle Link App found at Apple Store or Google Play. This product was added to our catalog on May 1, 2021
$56.99
HobbyWing HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC
HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC The Hobbywing XERUN XR10 Justock G3 1/10 Sensored Brushless ESC is the next level in zero timing spec racing. The timing in this ESC has been fixed to a permanent 0° to comply with stock class racing. Package includes one Justock ESC. Features: Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system Programmable via OTA Bluetooth module or 3in1 program box Built-in capacitor module eliminates the need for external capacitors and unwanted space RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box) Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use Supports both CCW (counterclockwise) and CW (clockwise) motor directions Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection Supports ESC firmware upgrades User-friendly and convenient for set-up Specifications: Continuous Current: 60A Burst Current: 380A Battery: 2S Lipo (Only 2S) Built-in BEC: 6V/7.4V @ 4A(Switch-mode) ESC programming: Independent programming port Motor Supported: Sensor and sensorless brushless motor Motor Limit: 10.5T 3650 Motor Application: 1/10, 1/12 On-road and Off-road Cooling Fan: Powered by BEC Size: 40.9x33.9x32.1mm (LxWxH) Weight: 75.4g (Including weight of wire) This product was added to our catalog on May 3, 2023
$69.99
Castle Creations CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter
CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter The Castle Creations Castle Link contains a proprietary interface adapter and standard USB cable that will give you in depth access to the programmable parameters of your Castle Creations ESC. All you need is an available USB port on your PC. Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit. Set up of programmable options with point and click ease View your current program settings Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Download new software updates as they become available Simple programming interface featuring: All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs). Demo Mode allows users to check available settings without connecting their Castle device to the computer Simple to install software Expanded programming and parameters for all Castle ESCs Set-up instructions: Download the interface software. Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit. Connect the USB cable to your PC. System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10. Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations. This product was added to our catalog on August 31, 2021
$24.99
HobbyWing HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box
HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 18.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun. Features: Compatible with sensorless brushless motors. High quality components, big current endurance. Excellent start-up, acceleration and linearity features. Plenty of programmable items, suitable for various of chassis's, tires and racing tracks. Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. Internal timing can be changed easily to make the ESC suitable for various of motors. Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software. ESC firmware can be updated through the USB adapter in the LCD Program Box. Top quality motor: Aluminum shell (case) High quality magnets Copper wires of high temperature endurance Good quality bearings ESC Specifications: Output: Continuous 18A, burst 50A. Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 6V/1A (Linear mode built-in BEC). Resistance: 0.01 Ohm. Motor Supported: Sensorless Brushless Motor. Suitable Car: 1/18 on-road sport. Cooling Fan: Not included. Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). Weight: 19g (Without wires) Motor Specifications: kV: 5200 Motor Diameter: 20mm Motor Length: 30 Shaft Diameter: 2mm Shaft Length: 10mm Weight: 46g Programmer Specifications: Size: 88x58x14mm Weight: 40g Input Weight: 4.8-6V Includes: EZRun 18A Brushless/Sensorless ESC EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor LED Program Box Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors. This product was added to our catalog on May 4, 2023
$50.99
Traxxas TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control
TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control Specifications: Input Voltage: 2x 2s/3s LiPo (Max 25.2 volts) Case Size: 2.23x2.83x1.81in (58x72x46mm) Weight: 206.5g (7.28oz) Motor Connectors: Traxxas 6.5mm Bullet Connectors BEC Voltage: 6.0 V BEC Continuous Current: 10A BEC Peak Current: 20A Power Wire: 10-Gauge Maxx Cable Input Harness Wire: 26 Gauge / 295mm Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Profile selection: Sport Mode: 100% FWD, 100% BRAKES, 100% REV Race Mode: 100% FWD, 100% BRAKES, NO REV Training Mode: 50% FWD, 100% BRAKES, 50% REV Battery Input Connector: Traxxas High-Current Connector Motor Types: Brushless Replacement part for these models: E-Revo VXL Brushless Unlimited Desert Racer This product was added to our catalog on May 7, 2021
$159.99
Traxxas TRA3465, Traxxas Velineon VXL-4S Brushless Electronic Speed Control
TRA3465, Traxxas Velineon VXL-4S Brushless Electronic Speed Control Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck. Specifications: Input Voltage: 3S–4S LiPo (11.1V – 16.8V) Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm) Weight: 201g (7.09oz) BEC Voltage: 6.0 V BEC Current Continuous: 10 A BEC Current Peak: 20 A Motor Connectors: Traxxas 6.5mm bullet connectors Battery Connectors: Traxxas High-Current Connectors Power Wire: 10-gauge Maxx Cable Ports: RX input, auxiliary fan, Traxxas accessory port This product was added to our catalog on May 2, 2021
$139.99
Traxxas TRA3018R, XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
3018R - XL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake) TRA3018R, ESC XL-5 WATERPROOF FWD/REV This product was added to our catalog on September 7, 2021
$85.00$69.99
HobbyWing HWA30112401, Hobbywing Xerun XR10 Pro Stock Spec V4 Sensored Brushless ESC
HWA30112401, Hobbywing Xerun XR10 Pro Stock Spec V4 Sensored Brushless ESC The Hobbywing Xerun XR10 Pro Stock Spec V4 offers the latest in Hobbywing ESC technology, developed and optimized for stock spec class racing. Recommended for on-road and off-road spec racing, this high quality ESC features a tiny 31.5x25.6x16.1mm footprint, a full aluminum case, and 80 amp current delivery with burst up to 380 amps! Other features include 2S LiPo compatibility, and a 6V/3A switch mode BEC. Specifications: Current: Continuous: 80A / Burst: 380A Battery: 5-7 cells NiMH/NiCd / 2S LiPo Built-in BEC: 6V@3A (switch mode) Motor Supported: Sensored and sensorless brushless motors Suitable Motor: 3650 Motors,1/10 Touring Cars ≥10.5T, 1/10 Buggy≥13.5T Application: STOCK class of 1/10th Touring Car & Buggy Racing Cooling Fan: 5V - 7.4V (20x20x8mm) Wires: 14AWG-200mm Size: 31.5x25.6x16.1mm Weight: 28g (without wires and cooling fan) This product was added to our catalog on May 3, 2023
$125.99
HobbyWing HWA30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box
HWI30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box This Hobbywing Multifunction Gen2 LCD Professional Program Box is for programming Hobbywing brushless ESCs. The user friendly LCD interface makes ESC programming quick and easy. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. It is very compact, portable and applicable for field use. NOTE: A external battery is needed for powering this program box when the ESC has no built-in/external BEC. Features: Works with Platinum, XeRun, EzRun, and Seaking series ESCs Specifications: Size: 91x51x17mm (LxWxH) Weight: 65g Input Voltage: 4.5V—12.6V Interface: USB C ESC interface: Futaba plug Power supply interface: Futaba plug This product was added to our catalog on June 4, 2021
$29.99
HobbyWing HWA30120201, Hobbywing Quicrun 1060 1/10 Brushed ESC
HWI30120201, Hobbywing Quicrun 1060 1/10 Brushed ESC Features: Water-proof and dust-proof, suitable for all weather races. Small size, with built-in capacitor module. Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse). Great current endurance capability. Great built-in BEC output capacity. Automatic throttle range calibration, easy to use. ESC parameters are easy to set with jumpers. Multiple protections: Over Voltage Protection Low voltage cut-off protection for battery Over-heating protection Throttle signal loss protection Specifications: Fwd Cont. Current /Peak Current/ Resistance: 60A/360A/0.001? Rev Cont. Current /Peak Current/ Resistance: 30A/180A/0.002? Motor Type Supported: Brushed Motor Application: 1:10 Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank Suitable Battery: 2-3S LiPo, 6-9 cell NiMH Brushed Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550 Size Motor: ?12T, Or RPM<30000 @7.2V 3S LiPo or 9 cell NiMH: 540 or 550 Size Motor: ?18T, Or RPM< 20000 @7.2V BEC Output: 2A/5V (Switch Mode) PWM Frequency: 1KHz Size/ Weight: 35.5(L)*32.18(W)*18(H) / 39g Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse Cooling Fan: No need This product was added to our catalog on May 20, 2021
$24.99
Traxxas TRA3045R, Traxxas LaTrax Waterproof Electronic Speed Control (w/Bullet Connectors)
TRA3045R, Traxxas LaTrax Waterproof Electronic Speed Control (w/Bullet Connectors) LaTrax Waterproof ESC FeaturesInnovative waterproof designFully-proportional forward, reverse, and braking controlProgrammable with three drive profiles:Sport Mode – Fwd / Brake / RevRace Mode – Fwd / BrakeTraining Mode – 50% Fwd / Brake / 50% RevEZ-Set® push-button setupMulti-color LEDThermal shutdown protectionEfficient, low-loss MOSFET designBacked by the Traxxas Lifetime Electronics warranty This product was added to our catalog on September 7, 2021
$60.00
Traxxas TRA3370, Traxxas Velineon VXL-3M Waterproof 1/16 Scale Brushless Power System
TRA3370, Traxxas Velineon VXL-3M Waterproof 1/16 Scale Brushless Power System Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Mustang Traxxas 1/16 Race Truck Traxxas 1/16 Rally Traxxas 1/16 Slash Traxxas 1/16 Summit This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles. The Velineon ESC simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs! The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for big power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 380 delivers consistent, high-power output, run after run. Velineon VXL-3m Features: Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system. Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold. Wide range of battery options, including 6-12 cell NiMH or NiCad packs The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity. The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures. The VXL-3m is programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode™ – 50% Fwd / Brake / 50% Rev Multi-color LED provides clear feedback Two-stage thermal shutdown protection protects the VXL-3m from overheating. Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound. Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded. Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture. Micro-fin aluminum heatsink dissipates heat. MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 (Ohm)). Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance. Velineon 380 Features: Ultra high-temperature sintered Neodymium magnets provide Massive torque and linear power Optimized for power and efficiency in 1/16th scale vehicles Consistent, high-power output, run after run Low-maintenance, unique Traxxas design Efficient, high-speed ball bearings Precision-balanced rotor 8-Turn, 4000KV Rebuildable Hex hardware Brilliant blue-anodized finish Silicone steel laminations Delivers more power than comparable brushed motors VXL-3M Specifications: Input Voltage: 6 to 12 cells NiMH, 2S to 3S LiPo Case Size: 26.5mm W x 46.5mm D x 22mm H Weight: 38 grams Motors: Sensorless Brushless Motor Limit: None On Resistance: 0.0005 Ohms PWM Frequency: 12,000Hz Peak Current: 326A Continuous Current: 52A BEC Voltage: 6.0V DC Motor / Battery Wiring: 16-Gauge Maxx® Cable Transistor Type: MOSFET Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Single-button setup: Yes, Traxxas EZ-Set® Battery Input Connector: Traxxas High-Current Connector Motor Connector: TRX 3.5mm Bullet Connectors Velineon 380 Specifications: Type: Sensorless Brushless kV (RPM/Volt): 4000kV (8T) Magnet Type: High Temp Sintered Neodymium Connection Type: TRX 3.5mm Bullet Wire Size: 16g Maxx Cable Continuous Current: 25A Max Current: 50A Burst Max RPM: 50,000 Weight: 140g (4.94oz) This product was added to our catalog on May 7, 2021
$149.99
Castle Creations CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV)
CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV) COMPATIBILITY: Arrma Felony 6S BLX Arrma Infraction 6S BLX Arrma Infraction V2 6S BLX Arrma Limitless Arrma Outcast 8S BLX The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before. Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine! When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles. Features: ESC: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty Motor: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs Specifications: ESC: Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (with no battery connector): 5.75 oz. (163 grams) Connectors: 6.5mm female bullets for motor connection. Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. Motor: Input Voltage Range: 3S-8S LiPo Kv: 1650 Max. RPM: 56,000 Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm) Weight (w/wires): 21.08oz. /597.6g Shaft Diameter: 5mm Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter Cooling Fan: Not available Connectors: 6.5mm male connectors Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo. Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™ ESC Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Tech Notes: This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo. Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Includes: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide This product was added to our catalog on June 23, 2021
$399.99
Castle Creations CSE010016001, Castle Creations Mamba X SCT 1/10 Brushless Combo w/1415 Sensored Motor (2400kV) (5mm Shaft)
CSE010016001, Castle Creations Mamba X SCT 1/10 Brushless Combo w/1415 Sensored Motor (2400kV) (5mm Shaft) The Castle Creations Mamba X SCT Waterproof 1/10 Brushless Combo includes the Mamba X, with the awesome 1415 Sensored motor to create a all in one system perfect for 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo. The Mamba X is going to shake things up. Extremely versatile, and capable of powering a wide variety of applications and vehicles the Mamba X is ideal for racing at the track with your 2wd buggy, bashing through mud puddles in your monster truck, or navigating a hardcore trail with your crawler. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. Castle Creations 1415 Sensored 4-Pole Brushless Motors combine rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, predictable power delivery, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for. Features: ESC Wide 2S to 6S input voltage range Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts The Mamba X is proudly designed and manufactured in Olathe, Kansas Backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support Motor 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering QUIETSENSE™ Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times HIGHER PRECISION and MORE EFFICIENT startups OPTIMIZED design eliminates the need for mechanical timing adjustments Sensor alignment method delivers uniform timing and torque in both directions, automatically REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft ROAR standard sensor port and labeled connections High strength 180°C neodymium sintered magnets High quality, temperature-stabilized sensors High-purity, high-temperature copper windings Hardened stainless steel shaft 13 AWG high strand wire with silicone insulation Kevlar wrapped rotor 6061-T6 Billet aluminum heatsink can High RPM NMB oversized bearings High quality 0.2mm steel laminations Low resistance gold plated bullet connectors Specifications: ESC Input Voltage Range: 2S LiPo (7.4V) to 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size (LxWxH): 2.14x1.39x1.18" (54.4x35.2x30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run Telemetry Link Capable: Yes Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Motor Input Voltage Range: 3-4S LiPo Kv: 2400 Max. RPM: 75,000 Length: 69.5mm Diameter: 36mm Weight (w/wires): 319g / 11.3oz Shaft Length: 21mm Shaft Diameter: 0.197" (5mm) Mounting Hole: M3 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors Recommended ESC (s): Combo includes Mamba X ESC. Recommended Applications: 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo with included 1415 - 2400kv sensored motor. Running Modes: SMARTSENSE™, Sensored, Sensorless Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs This product was added to our catalog on February 16, 2021
$292.95$275.00
Traxxas TRA3024R, Traxxas XL-2.5 ESC w/Low Voltage Detection (Waterproof)
TRA3024R, Traxxas XL-2.5 ESC w/Low Voltage Detection (Waterproof) This is the Traxxas XL 2.5 Electronic Speed Control, with Low Voltage Detection. Designed and engineered by Traxxas, the XL-2.5 Brushed Electronic Speed Control provides smooth throttle control with 380-size and smaller mini-motors and is completely waterproof for all-weather R/C driving fun. This high-performance ESC is packed with impressive specifications and features that are normally only found on expensive high-end replacement units. The XL-2.5 features three throttle profiles, Thermal Shutdown Protection, 6-8 cell NiMH and 2S LiPo compatibility, and built-in BEC. High-frequency operation combined with ultra-low resistance make the XL-2.5 an efficient and ultra-smooth fully proportional speed control. The XL-2.5 is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty. Traxxas High-Current Connector The XL-2.5 ESC is equipped with the Traxxas high-current connectors for restriction-free current flow. Patent-Pending Training Mode™ An exclusive feature that places the XL-2.5 ahead of the pack is the patent pending Training Mode. This feature reduces the overall power output of the XL-2.5 by 50% making it easier for new drivers to control their model. When they’re ready, simply change profiles to unleash full-throttle action. Only Traxxas has it! XL-2.5 Waterproof ESC Features: Innovative waterproof design 10-turn motor limit for 380 size motors Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode – 50% Fwd / Brake / 50% Rev EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design High-capacity heat sink Smooth, high-frequency operation Easy installation in Traxxas models Backed by the Traxxas Lifetime Electronics warranty XL-2.5 Waterproof ESC Specifications: Input Voltage: 4-8 cells NiMH; 2S LiPo Case Size: 26.5mm W x 46.5mm D x 22mm H Weight: 33 Grams Motor Limit: 10-turns (380 size) On Resistance (@Trans): 0.008 Ohms Reverse Delay: None BEC Voltage: 6.0V DC Power Wire: 16 Gauge / 40mm Input Harness Wire: 26 Gauge / 130mm Motor Wires: 26 Gauge / 130mm Transistor Type: MOSFET PWM Frequency: 2300 Hz Thermal Protection: Thermal shutdown Profile selection: Sport Mode: 100% FWD, 100% brakes, 100% REV Race Mode: 100% FWD, 100% brakes, No REV Training Mode: 50% FWD, 100% brakes, 50% REV Single-button setup: Yes, Traxxas EZ-Set® This product was added to our catalog on May 7, 2021
$49.99
Traxxas TRA3025, Traxxas XL-5HV 3S Waterproof Electronic Speed Control
TRA3025, Traxxas XL-5HV 3S Waterproof Electronic Speed Control This is the Traxxas XL-5HV 3S Waterproof Electronic Speed Control. HV stands for compatibility with the high voltage 3S LiPo battery packs for greater efficiency and power. In addition to the three standard profiles (Sport, Race and Training Mode), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. A new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate the trail with ease. This product was added to our catalog on April 7, 2021
$69.99
Corally COR54001, Corally CORA 40-Brushed ESC, 2-3S: SP Versions
COR54001, Corally CORA 40-Brushed ESC, 2-3S: SP Versions Max. Cont. Current (A): Forward: 40 A / Reverse: 20 A Motor Limit: 2S = 12T 3S = 18T Input Voltage (V) min. - max.: 5-12.6 V Max. Current (A): Forward: 180 A / Reverse: 90 A Resistance: Forward: 0.002 Ohn / Reverse: 0.004 Ohm Length (mm): 46.5 mm Nr of Li-xx Cells: 2-3S Width (mm): 34 mm Nr of Ni-xx Cells: 5-9 Cell NiMH Motor Type: Brushed Height (mm): 28.5 mm BEC Voltage (V): 6 V BEC Current (A): 2 A Weight incl. wire (g): 65 g Programmable: Jumper Throttle Mode: Forward / Reverse programmable Reverse lockout Battery Mode: NiMH / LiPo Cut off voltage: NiMH mode = 4.5 V Lipo Cut off: 2S = 6.5 V 3S = 9.75 V Thermal Protection Temperature: 105 Degrees C Water Protection: Yes Connector (Motor): 4 mm Connector (Battery): Tamiya style Motor wire size: 16 AWG Battery wire size: 16 AWG Car Type Use: 1/10th scale This product was added to our catalog on January 18, 2022
$37.99
Spektrum SPMXSE1130, Firma 130A Brushless Smart ESC, 2S-4S
SPMXSE1130, Firma 130A Brushless Smart ESC, 2S-4S
$149.99
Traxxas TRA3375, Traxxas Velineon VXL-3M Waterproof Brushless Electronic Speed Control
TRA3375, Traxxas Velineon VXL-3M Waterproof Brushless Electronic Speed Control This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control. This ESC simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs! Features: Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system. Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold. Wide range of battery options, including 6-12 cell NiMH or NiCad packs The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity. The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures. The VXL-3m is programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode™ – 50% Fwd / Brake / 50% Rev Multi-color LED provides clear feedback Two-stage thermal shutdown protection protects the VXL-3m from overheating. Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound. Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded. Water resistant case design uses rubber seals and o-rings to protect against damage caused by water and moisture. Micro-fin aluminum heatsink dissipates heat. MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 Ohm). Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance. Specifications: Input voltage: 6 to 12 cells NiMH, 2S to 3S LiPo Case Size: 26.5mm W x 46.5mm D x 22mm H Weight: 38 grams Motors: Sensorless Brushless Motor Limit: None On Resistance: 0.0005 Ohms PWM Frequency: 12,000Hz Peak Current: 326A Continuous Current: 52A BEC Voltage: 6.0V DC Motor / Battery Wiring: 16-Gauge Maxx® Cable Transistor Type: MOSFET Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Profile selection: Sport Mode: 100% fwd, 100% brakes, 100% rev Race Mode: 100% fwd, 100% brakes, no rev. Training Mode: 50% fwd, 100% brakes, 50% rev. Single-button setup: Yes, Traxxas EZ-Set® Battery Input Connector: Traxxas High-Current Connector Motor Connector: TRX 3.5mm Bullet Connectors This product was added to our catalog on July 17, 2021
$99.99
Traxxas TRA3382, Traxxas BL-2S Brushless Power System Combo
TRA3382, Traxxas BL-2S Brushless Power System Combo The water-resistant BL-2s speed controller offers the advantages of brushless technology while incorporating the expected safety and convenience features from Traxxas. With built-in low-voltage detection, thermal shutdown protection, and EZ-Set one-button programming, the BL-2s ensures reliability and user-friendly operation. The brushless BL-2s 3300 kV motor operates sensorlessly, offering the expected speed and torque of brushless technology without the hefty price tag. With its brushless design, the BL-2s ensures longevity and minimal maintenance needs. Equipped with low-friction ball bearings and an integrated cooling fan, it guarantees extended, maintenance-free enjoyment throughout your run. Features: ESC Perfect upgrade for your stock Brushed traxxas! Built-in two-stage low voltage and thermal detection Patented Training Mode reduces the power output by 50% for new or younger drivers EZ-Set one-button setup operates and programs Three driving profiles Sport, race and Training mode Motor Integrated cooling fan High-speed ball bearings Quick connect motor plug Specifications: ESC: Scale: 1/10 Brushed/Brushless: Brushless Sensored/Sensorless: Sensorless Waterproof: Yes Current: Input Voltage: 2S LiPo (7.4V MAX) BEC Output: 6V Output Connectors: Traxxas Quick Connect Dimensions: 2.3x1.5x1.2" (59x39x31mm) Weight: 3.06oz (87g) Motor: Input Voltage: 2S LiPo KV: 3300kV Motor Diameter: 1.455" (37mm) Motor Length: 2.24" (57mm) Weight: 7.09oz (201g) Includes (1) Traxxas BL-2s Brushless ESC (1) Traxxas BL-2s Sensorless Brushless Motor This product was added to our catalog on September 15, 2023
$99.99
HobbyWing Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller
Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller Features: Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages. A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC. Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors). Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time. Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately) Specifications: Application: 1/10th drift car Cont./Peak Current: 100A/800A Input Voltage: 2S LiPo/4-6S NiMH BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode) Wires & Connectors: 13AWG 200mm Programming device: LCD program box, OTA programmer (Available through Firmware update) Firmware: LCD Program box via USB software (PC only), OTA (iOS / Android) Size & Weight: 40.7x35.0x32.0mm (w/Fan) Weight: 95g (w/ wires) Motor Limit: 2S LiPo/6S NiMH ?8.5T Includes: (1) XD10 PRO ESC (2) Input wires & (3) Output wires (PRE-SOLDERED) (1) cooling fan Decals Bonus parts: heat tubes, double tape, nylon cable zap traps This product was added to our catalog on May 3, 2023
$220.99
HobbyWing HWA30501003, Hobbywing LED Program Card
HWA30501003, Hobbywing LED Program Card The Hobbywing LED Program Card is used to program Hobbywing ESC's. It features a user friendly interface and is easy to use. Package includes program box and 3-wire male/male plug for hooking the programmer to the ESC. Compatible With: Platinum V1/V2 series & FlyFun V5 series of brushless aircraft ESCs. XeRun series (some XeRun ESCs, please take the instructions of relevant user manuals as standard.) EzRun series QuicRun series of brushless car ESCs Quicrun 1080 & 880 brushed ESC SeaKing series of brushless boat ESCs Specifications: Size: 88x58x14mm Weight: 40g Input Voltage: 4.8-6V NOTE: If the ESC doesn't have a built-in BEC, you will need to use an additional 6.0V battery to supply power to the program box. This product was added to our catalog on February 3, 2022
$13.99
HobbyWing HWA30112751, Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC
HWA30112751, Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC The Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC is super small in size and at 31.6x25.8x16.2mm size, is 20% smaller than the standard version XeRun XR10 Pro 1S. Plus, the light weight (only 23.5g w/o wires) provides more weight margin when adjusting the balance of the chassis. Features: Special Design for Stock 1S Class Racing: Reliable hardware combined with powerful software (contains 5 common select-to-use profiles) provides an ideal power solution for 1/12th Stock 1S class racing Super Internal BEC: The built-in boost BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows users to use various, servos and receivers (without connecting any extra battery). Adjustable Throttle & Brake PWM Frequencies: The independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control. Programming/Upgrading/Data Reading Wirelessly: With Hobbywing's optional "WiFi Express" module (HWA30503000 - not included) and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand. Built-in Electronic Switch: The internal electronic switch with a lifespan of over 50,000 on/off cycles completely solves the problems like stuck reed, rust contact points, and automatic shutdown that conventional mechanical switches often have. Data-logging Capability: This ESC features the data-logging function which will record the maximum ESC & motor temperatures, the maximum motor RPM, and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use. Specifications: Cont./Peak Current: 80A/380A Input Voltage: 1S Lipo/3-4 Cell NiMH BEC Output: 6V/7.4V@3A Wires: Black-14AWG-200mm Connectors: No ESC Programing: LCD Program Box or WiFi Module Firmware Upgrade Supported: Yes Size: 31.6x25.8x16.2mm Weight: 23.5g (w/o Wires) Applications: Stock 1S class of 1/10th & 1/12th on-road racing. KV Rating/T Count: ≥10.5T, 3650-size Motor This product was added to our catalog on May 3, 2023
$124.99
Axial AXI31620, Axial AE-6 ESC/Rx Combo
AXI31620, Axial AE-6 ESC/Rx Combo The Axial AE-6 ESC/Rx is a replacement ESC/Receiver Combo intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one ESC/Receiver Combo.NOTE: This ESC/Receiver is not compatible with the Axial SCX24 AXI00002V2T1 & AXI00002V2T2 models. This product was added to our catalog on June 5, 2021
$31.99
Traxxas TRA3496, Traxxas X-Maxx Velineon VXL-8s Waterproof ESC
TRA3496, Traxxas X-Maxx Velineon VXL-8s Waterproof ESC This is the Traxxas X-Maxx Velineon VXL-8s Waterproof ESC. The Velineon VXL-8s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-8s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushless systems. The VXL-8s comes with the peace-of-mind of the Traxxas Lifetime Electronics Warranty and unmatched Traxxas customer support. The VXL-8s is not a toy. It is a sophisticated electronic device capable of delivering large amounts of current. Children under 14 years of age require adult supervision for use of the VXL-8s. Real-Time TelemetryThe VXL-8s now supports real-time telemetry capability using the optional 6511 Wireless Module (sold separately) installed in a Traxxas TQi transmitter. Use the free Traxxas Link App to download the telemetry update to the ESC. Receive speed, RPM, voltage and ESC temperature telemetry directly on your mobile device while you drive and best of all, no additional sensors are required. The Traxxas Link App makes it easy to update your VXL-8s with the newest features. Specifications: Input voltage: 4S/6S/8S LiPo (max. 33.6 volts) Supported motors: Sensorless brushless Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 6.5mm bullet connectors Motor/battery wiring: 10-gauge Maxx® Cable Thermal protection: 2-stage thermal shutdown Case size (l/w/h): 58mm (2.28”)/ 72mm (2.83”)/ 46mm (1.81”) Weight: 182g (6.42oz) This product was added to our catalog on April 12, 2021
$249.99
HobbyWing HWA38020336, Hobbywing XR10 Pro G2S Sensored Brushless ESC/V10 G4 Motor Combo (21.5T)
HWA38020336, Hobbywing XR10 Pro G2S Sensored Brushless ESC/V10 G4 Motor Combo (21.5T) This is the Hobbywing XR10 Pro G2S Sensored Brushless ESC/V10 G4 Motor Combo. Using the precise control of the XR10 Pro G2S combined with a powerful V10 G4 motor gives the user a dominant combo! XR10 Pro G2S 160A ESC: The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC offers all the tuning options needed for competitive racing while giving reliable performance on the track. Helping to keep this ESC reliable is the Frameless Fan Design (FFD) fan system. A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs. At the racetrack ESC adjustments can be crucial. The XR10 Pro G2S is packed with features such as several PWM adjustments. From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition. V10 G4 Motor: The V10 G4 Competition Stock Brushless Motor has been greatly optimized to provide maximum torque and increased power. With a lower internal resistance, this motor is more efficient and runs cooler when compared to the G3R motors. To further increase performance the motor adopts a fully exposed stator core allowing more airflow over the stator. The motor also features a high-precision endbell plate to improve consistency and structural stability. Dual sensor ports can be found allowing for different wiring setups. NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended. Features: ESC: Upgraded 32-bit M4 microprocessor with more powerful processing capability guarantees stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4) Peak current up to 1200A. (This is not a typo) Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages. Variable frequency regulation of PWM & amp; brake frequencies allows users to precisely regulate the driving; braking forces (of the motors). Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%. Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency. 10 select-to-use profiles applicable to all 1/10th RC car racing. Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations. Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC. With the Updated WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices. Switchable motor direction (CCW/CW) for various chassis. Multiple protections comes in standard Low-voltage cutoff protection ESC and motor thermal protection Fail safe (throttle signal loss protection) Reverse polarity protection Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time. Firmware upgrade via Hobbywing multi-function LCD program box or WiFi Express (item sold separately). Motor: Specially designed for high-level racing. Lightweight: The G4 Modified & Stock motors only weigh 161g & 132g respectively. The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor. The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G4 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees. The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts. The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s). The use of high-performance stator core, heat (200°C) resistant wire, heat (200°C) resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability. Specifications: ESC: Cont./Peak Current: 160A / Burst: 1200A Battery: 5-6 cells NiMH/NiCd / 2S LiPo BEC Output: 5V-7.4V Motor Supported: Sensored and sensorless brushless motors Suitable Motor: 3650 Motors 1/10th Touring Car: 4.5T, 1/10th Buggy: 5.5T Application: Brushless motor system for 1/10th, 1/12th Touring Cars & Buggies Racing, Splash proof Wires: Standard 13AWG 200mm Size: 37.5X30.9X32.5mm Weight: 90g (with wires) Motor: kV Rating: 2500kV Cell Count: 2-3S No-Load Current: 3.0A Outer Diameter: 35.8mm Length: 51.4mm Shaft Diameter: 3.175 Weight: 148g Front Bearing: 9x4x4mm Rear Bearing: 8x3x4mm Adjustable Timing: 30-60° Applications: 1/10th Stock Class Racing This product was added to our catalog on May 3, 2023
$319.99
Castle Creations CSE011013700, ESC Cooling Replacement Fan :Mamba X
CSE011013700, ESC Cooling Replacement Fan :Mamba X
$12.95
Traxxas TRA3480, Traxxas Velineon VXL-6S Brushless Power System
TRA3480, Velineon® VXL-6s Brushless Power System, waterproof (includes VXL-6s ESC SKU: TRA3485 and 2200Kv, 75mm motor SKU: TRA3481) Traxxas Velineon VXL-6S Brushless Power System. This replacement power system is intended for the Traxxas E-Revo VXL 2.0 or the Unlimited Desert Racer. Package includes one motor and one ESC.Specifications: ESC: Input Voltage: (2) 2s or 3s LiPos (Max 25.2 volts) Case Size: 2.23in (58mm) x 2.83in (72mm) x 1.81in (46mm) Weight: 206.5g (7.28oz) Motor Connectors: Traxxas 6.5mm Bullet Connectors BEC Voltage: 6.0 V BEC Continuous Current: 10A BEC Peak Current: 20A Power Wire: 10-Gauge Maxx® Cable Motor: kV: 2200 Can Length: 77.5mm Can Diameter: 41.8mm Total Length: 98.5mm Shaft Length: 21mm Shaft Diameter: 4.99mm Replacement part for these models: E-Revo VXL Brushless Unlimited Desert Racer This product was added to our catalog on April 12, 2021
$269.99
HobbyWing HWA30105000, Hobbywing EZRun MAX6 V3 1/6 Waterproof Brushless ESC (160A, 3-8S)
HWI30105000, Hobbywing EZRun MAX6 V3 1/6 Waterproof Brushless ESC (160A, 3-8S) This is the Hobbywing EZRun MAX6 V3 1/6 Scale Waterproof Brushless ESC. Compatible with 3-8S LiPo power, the MAX6 is a great choice for 1/6 and 1/7 scale vehicles like the Traxxas XO-1, but is also suitable for various 1/8 scale heavy vehicles like the E-REVO and CEN GST-E Monster Trucks. It's the ideal option for high-end aggressively powered builds. Features: High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX6 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX6 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability. Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Voltage Built-in BEC: The MAX6 has adopted the world's first HV built-in BEC with an output current of up to 25Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today's high voltage servos on demand used by large scale vehicles. Advanced & Secure Electronic Switch: The MAX6 features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design. Regular Firmware Updates Free of Charge: You can upgrade the MAX6 with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it's ESC firmware regularly giving you upgraded features more often when available. Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces. Built-in Anti-Spark System: The MAX6 is built wit an internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S). Specifications: Continuous Current: 160A Peak Current: 1,050A Motor Type: Sensorless Brushless Motor Applications: 1/6th Touring Car, Buggy, Truggy and Truck Motor Limit: With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor); With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor) LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC) Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller) Size (LxWxH): 70x56x46.5mm Weight: 240g Programming Port: FAN /PRG Port Includes: (1) Ezrun MAX6 ESC (3) 10 AWG, 200C Black wires for a brushless motor (1) Double side tape (2) Heat shrink tube (1) Manual (1) Hobbywing decal Recommended Hobbywing Programmers: HWA30502000014: Hobbywing Multifunction LCD Program Box HWA86020010: Hobbywing Program Box This product was added to our catalog on May 20, 2021
$169.99
Castle Creations CSE010-0167-01, Castle Creations Mamba XLX 2 1/5 Sensored Brushless ESC/Motor Combo (800Kv) w/2028 Motor
CSE010-0167-01, Castle Creations Mamba XLX 2 1/5 Sensored Brushless ESC/Motor Combo (800Kv) w/2028 Motor The Castle Creations Mamba XLX 2 1/5 Scale Sensored Brushless ESC/Motor Combo with 2028 800Kv motor is a product guaranteed to redefine the limits of large scale R/C. Though it shares the name of its predecessor, the Mamba XLX, this is an ESC that lives in a class of its own. Reengineered from the ground up, the Mamba XLX 2 is packed with a potent combination of design, hardware and software advancements that will set a new standard for large-scale power systems. Designed for 1/5 Scale models weighing up to 42 lbs, the XLX 2 is an incredible power upgrade for the Losi DBXL-E and Super Rock Rey, Arrma Kraton 8S and Outcast 8S, or Traxxas X-Maxx models! If you are looking for the ultimate upgrade for your speed run, drag racing or off road rigs - the XLX 2 is a true heavyweight, with no contenders. CRYO-DRIVE: MORE POWER – COOLER TEMPS – LONGER RUNS Castle’s latest break-through technology, minimizes the amount of time the ESC’s electrical components spend generating heat. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 50mm fan and a forged elliptical fin heatsink, the design maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling. NOTE: Some vehicles may require aftermarket parts to allow ESC and/or motor fitment. Features: Sensored, Sensorless and SmartSense™ running modes Powerful Integrated 20A Peak Adjustable BEC (5.25V-8.0V) Premium forged heatsink with for superior airflow and increased heat dissipation Oversized factory equipped thermally controlled 50mm fan Waterproof design for all weather conditions. ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer Data-logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for “on the-fly” adjustments using your transmitter Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options. Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store. Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1-year warranty Specifications: ESC: Input voltage range: 3S-8S LiPo Length: 3.98” (101.2mm) Width: 2.49” (63.3mm) Height: 2.2” (55.8mm) On/Off Switch: Yes, waterproof* Cooling Fan: Yes, thermally controlled factory equipped (50mm) fully removable** Weight: 13.1 oz (371g) Running Modes: Sensored, Brushed, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. (Dust cover included in package for non-sensored operation) Wire Gauge: 8AWG Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX, T7PXR Transmitters. Items Needed: Battery connectors designed for 150+ amps continuous, such as Castle 6.5mm polarized or CC BULLET 8.0MM Motor: Application Guidelines: 1:5th Scale vehicles weighing up to 30 lbs. Vehicle Examples: Losi DB XL-E,™ Losi Super Rock Rey™, Arrma Kraton 8s™, Arrma Outcast 8s™, Traxxas X-Maxx™ (Some vehicles may require aftermarket parts to allow ESC and/or motor fitment) Input Voltage Range: MIN: 3S LiPo, MAX: 8S LiPo 33.6V Kv: 800Kv Max. RPM: 45,000 Diameter: 2.22” (56.3mm) Length: 4.44” (112.7mm) Shaft Size: 30mm (Length), 8mm (Diameter) Weight (w/wires): 44 oz./1.25kg Mounting Hole Specifications: Holes: 4mm, Spacing: 30mm Connectors: 8.0mm male connectors, 300mm Direct Connect Sensor Wire Includes: Mamba XLX2 ESC 2028-800kv Sensored Brushless Motor 300mm Direct Connect Sensor Wire Mamba Decals Mamba XLX2 Quick Start Guide Sensor port dust cover Coupon for free Castle Link USB This product was added to our catalog on October 12, 2021
$499.99
Spektrum SPMXSE2425RX, Spektrum RC 10Amp Brushed 2-in-1 ESC/SLT Receiver Combo
SPMXSE2425RX, Spektrum RC 10Amp Brushed 2-in-1 ESC/SLT Receiver Combo Spektrum RC 10Amp Brushed 2-in-1 ESC/SLT Receiver Combo. Designed for the ultimate in convenience this portable yet powerful ESC/Receiver combo is an excellent addition for most 1/24 scale vehicles such as the Axial SCX24. Featuring multiple adjustable parameters, 3 channels of control and the ability to use 2S LiPo batteries this capable unit is a must have for your next small scale build. Features: Convenient 2-in-1 ESC/Rx Combo Adjustable Drag Brake Low Voltage Warning Built in Fail Safe Adjustable Running Modes Specifications: Continuous Current: 10A Receiver Frequency: 2.4G (SLT2) LiPo/NiMH Cells: 2S LiPo BEC Output: 1A /5V (Switch Mode) Battery Connector: PH 2.0 Motor Connectors: PH 2.0 Dimensions (LxWxH): 33x33x15mm Compatible Motors: DYNS1217 Running Mode: Fwd/Rev/Br or Fwd/Rev Includes: (1) 10Amp Brushed 2-in-1 ESC/SLT Receiver Combo (1) Binding Plug Product Manual This product was added to our catalog on March 27, 2023
$24.99
HobbyWing HWA38010801, Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo w/4985SL (1650kV)
HWI38010801, Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo w/4985SL (1650kV) The Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo includes the 4985SL 1/7 scale, 1650kV motor and is a great option for high-end, aggressively powered 3S - 6S builds. Specifications: Motor: Model: 4985SL-1650KV Pole: 4 KV (No-load): 1650KV Resistance: 0.0053 Ω Current (No-load): 5.4 A Max. Output Power: 5700 W Current at the point of M.O.P: 160 A Motor Diamter: 49mm Motor Length: 86.5mm Shaft Diameter: 5.0mm Shaft Length: 21.5mm LiPo Cells: 3-6 Weight: 587g (20.71oz) Applications: 1/6th & 1/7th RC Vehicles ESC: Continuous Current: 160A Peak Current: Peak Current: Peak Current: 1,050A Motor Type: Sensorless Brushless Motor Applications: 1/6th Touring Car, Buggy, Truggy and Truck Motor Limit: With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor); With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor) LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC) Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller) Size (LxWxH): 70x56x46.5mm Weight: 240g Programming Port: FAN /PRG Port This product was added to our catalog on April 21, 2021
$259.99
Redcat Racing RER06910, Redcat Hobbywing 1/10 Brushed Waterproof ESC
REDRER06910, Redcat Hobbywing 1/10 Brushed Waterproof ESC This product was added to our catalog on January 21, 2022
$37.99
Spektrum SPMXSE1160, Spektrum RC Firma 160 Amp Brushless Smart ESC
SPMXSE1160, Spektrum RC Firma 160 Amp Brushless Smart ESC Spektrum Firma 160 Amp Brushless Smart ESC. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable. Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best. With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity. Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior! Features: Smart all-in-one telemetry Fast, powerful 32-bit ARM M4 processor Waterproof Multiple options for easy programming: Button programming Smart ESC Programming Box SmartLink USB Updating and Programmer application Multi-point protection: Over-current protection Automatic LiPo low-voltage cutoff Thermal protection Failsafe protection Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer Compact for easy installation in most applications Ready to install — no soldering required Rugged plastic case with mounting tabs Aluminum heat sink for high efficiency Cooling fan Adjustable high-power BEC Firmware updatable through the Smart ESC Programming Box High heat-resistant IC™ connectors, backwards compatible with EC™ connectors Limited 1-year warranty Specifications: Forward: Y Reverse: Y Brake: Y Time Delay Brake: Y Continuous Maximum Current: 160A (1050A Max Burst) Input Voltage: 11.1 - 29.6V Input Connector Types: IC5 Output Connector Types: Female 6.5 Bullets Length: 70 Width: 77 Height: 44 Weight: 280g BEC Voltage: 6V / 8.4V Includes: (1) Spektrum™ Firma™ Smart ESC (1) Spektrum Smart sticker sheet (1) Product Manual This product was added to our catalog on October 23, 2021
$219.99
ZTW ZTW-300-6300400, Seal Series ESC: 300A OPTO 6s-14s
Seal Series ESC: 300A OPTO 6s-14s Product Item SEAL 300A OPTO HV 14S Model Number 6300400 Form Brushed / Brushless Brushless HV / Normal HV Hardware Parameters Continuous Current (A) 300A Burst Current(A) 1000A Battery Cell (NiXX/Lipo) 18-42 NC/6-14 Lipo BEC output / Dimensions Length 84mm Width 146mm Height 28.6mm Weight 640g Wire & Plug Power Wire 8＃AWG，160mm-Red/160mm-Black Motor Wire 8＃AWG，160mm-Black Signal Wire 1 (Brown/Red/Orange)60C，add a special JR male connector at the end of 330mm wire Signal Wire 2 (Brown/Red/Orange)30C，add a special JR male connector at the end of 150mm wire Power Plug (Yes/No) no Parameter programming Transmitter yes Jumper programming card LCD programming card yes WiFi programming card yes USB adapter yes Firmware Upgrade Firmware online(Yes/No) yes Default Brake Type: Brake OffBattery Type: LiPo with Automatic Cell detectiveCut Off Voltage Threshold: 3.0V/60%Motor Timing: AutoMotor Rotation: ForwardStart Up Strength: 30%Low Voltage Cut Off Type: Reduce Power 18-42 NC/6-14 Lipo
$374.99
HobbyWing HWA30408013, Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motor (25.5T)
HWA30408013, Hobbywing XERUN Justock 3650 SD G2.1 Sensored Brushless Motor (25.5T)
$74.99
HobbyWing HWA38020323, Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo (25.5T)
HWA38020323, Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo (25.5T) The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 25.5T motor is an ideal choice for vintage trans am, formula and other on-road racing classes. These two components paired together make for an ideal choice for beginners and experts alike. Features: ESC: Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system Programmable via OTA Wireless module or 3in1 program box Built-in capacitor module eliminates the need for external capacitors and unwanted space RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box) Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use Supports both CCW (counterclockwise) and CW (clockwise) motor directions Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection Supports ESC firmware upgrades User-friendly and convenient for set-up Motor: Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency This Justock motor is applicable to various 1/10th, 1/12th on-road Stock Spec Racing, ICC, IOCC, USVTA, TOUR, Oval racing. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice The motor design is in compliance with IFMAR, and ROAR specifications Specifications: ESC: Continuous Current: 60A Burst Current: 380A Battery: 2S Lipo (Only 2S) Built-in BEC: 6V/7.4V @ 4A(Switch-mode) ESC programming: Independent programming port Motor Supported: Sensor and sensorless brushless motor Motor Limit: 10.5T, or greater, 3650 Motor Application: 1/10, 1/12 On-road and Off-road Cooling Fan: Powered by BEC Size: 40.9x33.9x32.1mm (LxWxH) Weight: 75.4g (Including weight of wire) Motor: Scale: 1/10, 1/12 Brushless: Yes Sensored: Yes Pole Count: 2 KV Rating: 1600 LiPo Cells: 2-3S No-Load Current(A): 2.8 Outer Diameter: 35.9mm (1.413") Length: 52.5mm (2.067") Shaft Diameter: 3.17mm (0.125") Weight: 173g (6.10oz) Timing: Fixed Includes: (1) Justock G3 ESC (1) Justock 25.5t G2.1 brushless motor (1) 5V cooling fan (1) Sensor cable This product was added to our catalog on October 20, 2023
$119.99
Traxxas TRA3465T, Traxxas Velineon VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
TRA3465T, Traxxas Velineon VXL-4s High Output Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) Traxxas Velineon VXL-4S Brushless Electronic Speed Control. This ESC is a replacement for the Traxxas Maxx Monster Truck Specifications: Input Voltage: 3S–4S LiPo (11.1V – 16.8V) Case Size: 2.83 inches (72mm) x 2.32 inches (59mm) x 1.93 inches (49mm) Weight: 201g (7.09oz) BEC Voltage: 6.0 V BEC Current Continuous: 10 A BEC Current Peak: 20 A Motor Connectors: Traxxas 6.5mm bullet connectors Battery Connectors: Traxxas High-Current Connectors Power Wire: 10-gauge Maxx Cable Ports: RX input, auxiliary fan, Traxxas accessory port This product was added to our catalog on May 2, 2021
$149.99
Spektrum SPMXSE1100, Spektrum RC Firma 100 Amp Brushless 3S Smart ESC
SPMXSE1100, Spektrum RC Firma 100 Amp Brushless 3S Smart ESC The Spektrum Firma 100 Amp Brushless 3S Smart ESC combines "plug-and-play" simplicity with the ability to communicate with other Smart electronics. Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best. With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity. Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior! Features: Smart all-in-one telemetry Fast, powerful 32-bit ARM M4 processor Waterproof Multiple options for easy programming: Button programming Smart ESC Programming Box SmartLink USB Updating and Programmer application Multi-point protection: Over-current protection Automatic LiPo low-voltage cutoff Thermal protection Failsafe protection Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer Ideal for 4WD 1/10th – 1/8th scale surface applications running on 3s Lipo setups High current adjustable BEC (6v or 7.4v @ 4 Amps) Compact for easy installation in most applications Ready to install — no soldering required Rugged plastic case with mounting tabs Aluminum heat sink for high efficiency Cooling fan Adjustable high-power BEC Firmware updatable through the Smart ESC Programming Box High heat-resistant IC™ connectors, backwards compatible with EC™ connectors Limited 1-year warranty Specifications: Auto Cutoff: Yes Battery Type: LiPo (3.7V per cell) BEC: Yes BEC Continuous Current: 4A BEC Voltage: 6V and 7.4V selectable Brakes: Yes Connector Type: IC5 Drive Type: Forward/Brake/Reverse Forward: Yes Input Voltage: 6.0V - 9.6V (2-4S LiPo, 5-9 cell NiMH) Low-Voltage Cutoff Programmable: Yes Maximum Burst Current: 650A Maximum Continuous Current: 100A Motor Output Lead: 4mm Female Bullet Motor Type: Brushless - Sensorless Output: 100A Output Connector: 4mm Bullet Overload Protection: Yes Product Height: 1.33" (34 mm) Product Length: 1.7" (43 mm) Product Weight: 0.306lbs (139g) Product Width: 1.53" (39 mm) Programmable: Yes Reverse: Yes Technology: Smart Time Delay Brake: Yes Water-Resistant: Yes Includes: (1) Spektrum™ Firma™ Smart ESC (1) Spektrum Smart sticker sheet (1) Product Manual Needed to Complete: Spektrum™ Surface Receiver Spektrum Smart Technology LiPo Battery Spektrum Transmitter This product was added to our catalog on March 12, 2021.
$99.99
Spektrum SPMXSE1150, Spektrum RC Firma 150 Amp Brushless Smart ESC
SPMXSE1150, Spektrum RC Firma 150 Amp Brushless Smart ESC Spektrum Firma 150 Amp Brushless Smart ESC. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable. Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best. With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity. Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior! Features: Smart all-in-one telemetry Fast, powerful 32-bit ARM M4 processor Waterproof Multiple options for easy programming: Button programming Smart ESC Programming Box SmartLink USB Updating and Programmer application Multi-point protection: Over-current protection Automatic LiPo low-voltage cutoff Thermal protection Failsafe protection Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer Compact for easy installation in most applications Ready to install — no soldering required Rugged plastic case with mounting tabs Aluminum heat sink for high efficiency Cooling fan Adjustable high-power BEC Firmware updatable through the Smart ESC Programming Box High heat-resistant IC™ connectors, backwards compatible with EC™ connectors Limited 1-year warranty Includes: (1) Spektrum™ Firma™ Smart ESC (1) Spektrum Smart sticker sheet (1) Product Manual Specifications: Forward: Y Reverse: Y Brake: Y Time Delay Brake: Y Continuous Maximum Current: 150A (950A Max Burst) Input Voltage: 11.1 - 22.2V Input Connector Types: IC5 Output Connector Types: 6.5 Female Bullet Length: 58mm (2.3in) Width: Case = 47.5mm (1.9in) W/ Tabs = 59.5mm (2.3in) Height: 38.5mm (1.5in) Weight: 238g (8.4 oz) BEC Voltage: 6V (5A) This product was added to our catalog on March 12, 2021
$159.99
Castle Creations CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV)
CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV) The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 2028 Sensored Motor is a great way to take your build to the next level with Castle’s cutting edge sensored large scale brushless power. The MAMBA MONSTER X 8S COMBO is ready to power any R/C vehicle weighing up to 25lbs, and running all the way up to 8S LiPo. This motor and ESC combo is designed for heavy, high speed rigs, and you'll experience smooth low-end control, without sacrificing power, punch, or speed. The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology, CRYO-DRIVE. By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. The ESC was designed with a robust aluminum casing, and the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a beast, ready to take on the harshest of environments and still perform. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. When paired with the Castle sensored 2028-800KV motor, users with heavy, high power rigs will experience controllable low-end control without sacrificing power, punch or speed. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. NOTE: This is not a direct replacement to the Mamba XLX. The XLX still handles rawer full throttle power in the most extreme setups. Features: ESC: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty Motor: The 2028 Extreme can easily run in the 10 horsepower range (Burst power output for duration's typical of vehicle acceleration.) Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Proprietary winding techniques allow Castle Creations to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design that looks as cool as it performs. Specifications: ESC: Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40MM), fully removable** (See Product Use Statements below) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (with no battery connector): 5.75 oz. (163 grams) Connectors: 6.5mm female bullets for motor connection Motor: Input Voltage Range: 12S MAX Kv: 800 Max. RPM: 45,000 Minimum Input Voltage: 3S Maximum Input Voltage: 12S Sensored Capable: Yes Can Length: 4.4" (113.2mm) Can Diameter: 2.2" (57mm) Weight (w/wires): 44 oz./1.25kg Shaft Size: Length: 30mm Diameter: 8mm Mounting Hole Specifications: 4mm holes @ 30mm spacing. Cooling Fan: Available, but not included. See 011-0019-00 here. Connectors: 8.0mm male connectors Recommended ESC: Mamba XL X Running modes: Sensorless and Sensored Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 25lbs. 2WD vehicles weighing less than 30lbs. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. Castle recommends using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is NOT intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. *Fan is not waterproof. Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the motor or ESC. The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the Running & Maintaining document in the resources tab above for info on running and maintaining motors in wet environments. Application Guidelines: Mamba Monster X 8S and 2028-800Kv motor is intended for use in 1:6 scale vehicles weighing up to 25 lbs. and up to 8S LiPo. Vehicle Examples: Traxxas™ X-Maxx & Unlimited Desert Racer; Arrma™ Kraton 8s & Limitless; Losi™ Super Rock Rey & Audi R8; Redcat™ Shredder (optional motor mount and modifications may be necessary to install motor). Includes: Mamba Monster X 8S ESC 4-POLE Sensored 2028-800KV Motor Castle Sensor Harness Adapter (installed) 250mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide This product was added to our catalog on April 4, 2021
$454.99
HobbyWing HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth)
HWA30112613, Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC (Stealth) The Hobbywing Xerun XR10 Pro G2S 160A Sensored Brushless ESC is great for giving the user all the tuning options needed for competitive racing. This Stealth edition is given the Hobbywing FFD (Frameless Fan Design) system for extreme ESC cooling. Get the XR10 G2S and experience true motor control. Hobbywing FFD: A frameless fan is used inside the housing allowing more air to flow through the ESC. With precise maximum airflow, racers will see no additional power draw seen with other fan designs. PWM Adjustments: From preset frequency or the custom frequency settings, tuners can now adjust from 1K - 32K PWM for Throttle and 0.5-16K for Brakes. This allows ultra fine-tuning of throttle and brakes to suit any driver or track condition. Internal BEC: The internal BEC is a switching design and provides up to 10A of power. Adjustable from 5-7.4V, this ESC is designed to handle the most power hungry of servos. NOTE: While the XR10 Pro G2S ESC is equipped with a built-in reverse polarity protection, the external capacitor will still be damaged if a reverse polarity does occur. For full protection an optional Hobbywing Non-polarity Capacitor Module is recommended. Features: 32 Bit, M4 microprocessor for ultimate performance Frameless fan design for extreme cooling Reverse polarity protection Precise adjustments to throttle and brake PWM Optimized programmable parameters Extended brake force Drag Brake Acceleration and Softening Function High output BEC Specifications: Wire gauge: 13 AWG Lightweight Ultra-flex Application: 1/10th Touring car & Buggy racing, 1/10th drift car and F1 Continuous Current: 160A Peak Current: 1200A Input Voltage: 2S LiPo / 4-6S Cell NiMH BEC Output: BEC voltage of 5-7.4V Programming device: LCD Program Box / OTA Programmer Firmware: LCD Program box via USB software (PC only) / OTA (iOS / Android) Size & Weight: 37.5x30.9x32.5mm (with Fan & Fan Shroud) Weight: 88g (with wires) Motor spec recommendation: Touring Car: >4.5T Buggy: >5.5T Includes: (1) Xerun XR10 Pro G2S 160A Sensored Brushless ESC (1) Cooling Fan (1) Capacitors Decals Accessory package This product was added to our catalog on December 14, 2023
$224.99
HobbyWing HWA38010602, Hobbywing EZRun MAX5 G2 Sensored Brushless ESC & Motor Combo w/56118SD (800kV)
HWA38010602, Hobbywing EZRun MAX5 G2 Sensored Brushless ESC & Motor Combo w/56118SD (800kV) The EZRun MAX5 G2 Sensored Brushless ESC and Motor Combo is a must have for your large scale needs. The Max5 G2 ESC is stacked with fancy features such as the Freewheeling Technology which increases driving efficiency and will in turn lower operating temperatures. The ESC acquired an IP-67 waterproofing rating and high voltage handling capabilities of 44.4V, this combo will have enough power to send your rig to the next ZIP code, the Hobbywing Max5 combo is everything you want and more. Features: MAX5 G2 ESC Enhanced Performance Intelligent Freewheeling Technology Turbo Timing Technology 56118SD G2 Motor 4-pole rotor design for more torque with strong explosive force Detachable motor design for easy maintenance Waterproof sensor interface Explosion proof rotors Spiral CNC shell Specifications: ESC: Scale: 1/5th Brushed/Brushless: Brushless Sensored/Sensorless: Sensored Waterproof: IP-67 Current: Continuous: 250A Peak: 1,600A Input Voltage: 6-12S LiPo BEC Output: 6V-8.4V Output Connectors: 8mm Bullet Dimensions: 3.7x2.3x2.0" (94.5x59.4x50.9mm) Weight: 15.1oz (428.5g) Motor: Input Voltage: 8-12S LiPo KV: 800kV Pole: 4 Motor Diameter: 2.20" (56mm) Motor Length: 4.69" (119.2mm) Shaft Diameter: 0.31" (8mm) Shaft Length: 1.18" (30mm) Front Bearing size: D22*D8*T7 Rear Bearing size: D19*D5*T6 Weight: 45oz (1277g) Includes: (1) EZRun MAX5 G2 1/5 Scale Waterproof Brushless ESC (1) EZRUN 56118SD G2 4-Pole 1/5 Scale Sensored Brushless Motor
$389.99
Yokomo YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller
YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller The Yokomo RPX-II Drift Spec Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences. This "Drift Spec" ESC is best suited for 2wd and 4wd 1/10 drift platforms and has been specifically tuned for drifting applications. Smooth throttle control and a multitude of power adjustments makes this ESC one of the best drift oriented options. Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-RPXP2), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WMA). Features: Dedicated sensored brushless controller Programmable with YOKBL-WMA Wi-Fi module or YOKBL-RPXP2 Programmer 49 Individual ESC programming parameters A multitude of boost and turbo adjustments Advanced brake adjustments Full aluminum case with cooling vent & high power 30mm cooling fan Specifications: Motor Type: Sensored Brushless Motor Limit: 3.0T (specification when using the fan) Operating Voltage: 3.7-7.4V Forward/Brake/Reverse: Yes Full Aluminum Case/Heatsink: Yes Typ. Voltage Drop @20A per Phase: 0.048V Rated Current per Phase: 249A Plugged 30x30x10mm Fan: optional BEC Output: 6V/7.4V 6A Linear Continuous Current BEC Output Short Protection: Yes "Boost 0" Mode: Yes Multi-frequency system: Yes Power Wires: 12 AWG Case Size: 32.9x34.6x19.6mm (without fan) Weight: 44g (without cables and fan) This product was added to our catalog on September 5, 2023
$239.99
Castle Creations CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC
CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC The Castle Creations Mamba Monster X 8S 1/6 Brushless ESC features CRYO-DRIVE™ - Castle’s latest break-through technology. CRYO-DRIVE minimizes the amount of time the ESC’s electrical components spend generating heat. This proprietary software advancement works in parallel with a unique open housing design and a forged elliptical fin heatsink to allow increased directional airflow to cool critical components. Combine this with a high speed 40mm fan and you have a design that maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling. Mamba Monster X 8S is designed for 1/6 scale vehicles weighing up to 25 lbs. with up to 8S LiPo. Compatible models include the Traxxas X-Maxx & Unlimited Desert Racer; Arrma Kraton 8s & Limitless; Losi Super Rock Rey & Audi R8; Redcat Shredder. Features: Input voltage range 2S-8S LiPo Sensored, Sensorless and SmartSense™ running modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) Premium forged heatsink with elliptical fins for superior airflow and increased heat dissipation Oversized factory equipped thermally controlled 40mm fan ? Waterproof design for all weather conditions ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer Data-logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for “on the-fly” adjustments using your transmitter Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1 year warranty Specifications: Application guidelines: 1:6 scale RC hobby vehicles weighing up to 25 lbs Running Modes: Sensored, Sensorless and SmartSense™ (when paired with a Castle 4-POLE 12SLOT sensored motor) Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V Operating environment: Waterproof design enables use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled for racing On /off switch: Yes, waterproof Cooling fan: Yes, factory equipped (40mm), fully removable (See Product Use Statements for more info) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (w/wires): 5.75 oz. (163 grams) Connector type: 6.5mm female bullets for motor connection Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. This product was added to our catalog on May 14, 2021
$214.99
You have seen 48 out of 96 products