TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh) This is the Traxxas 2S, 7.4V, 5800mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. High-Current Connector Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards. With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task. The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance. NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection. Features: Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time. Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run. Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times. Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs. Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery. Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models. Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked! Specifications: Type: LiPo Total Capacity: 5800 Voltage: 7.4 Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Watt Hours: 42.92 Charge Rate: 1C (5.8A) Max Charge Rate: 2C (11.6A) Dimensions: 137x25x43mm Weight: 10.9oz (308g) CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger. This product was added to our catalog on May 7, 2021

Read more less

TRA2869X, This is the Traxxas 2S, 7.4V, 7600mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors. High-Current Connector Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards. Charging with a Traxxas iD Charger The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you. Features: Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time. Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run. Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times. Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs. Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery. Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models. Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked! Specifications: Type: LiPo Total Capacity: 7600 Voltage: 7.4 Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 155x27x43mm Weight: 13.8oz (390g) This product was added to our catalog on September 7, 2021

Read more less

PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh) The ProTek R/C 2S 100C Si-Graphene + HV LiPo Stick Pack Battery is built using a hard plastic case that is the same dimensions as a standard NiMH stick pack. This makes them a great choice for Tamiya TCS Series racing, including Euro Truck, all GT classes, M-Chassis and Formula One - as well as Euro Truck Racing League. Plus, its a great choice for any chassis that will accept a 6 cell NiMH stick pack. Weighing in at 235 grams, this Si-Graphene + HV battery weighs less than a standard 5000mAh LiPo battery of the same configuration - making your car lighter and faster! When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, increased run time, increased cycle life and increased voltage - but Graphene + 100C LiPo batteries take that a step further with more power and lower internal resistance when compared to the previous ProTek LiHV Graphene packs! This provides more runtime, and a dramatic increase in voltage and punch over the course of a run.   Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries, Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 100C discharge ratings, incredibly high charge rates and huge variety of models to choose from, ProTek R/C 100C Graphene + packs are perfect for racers and bashers that demand the absolute best.   Features:  Perfect for Tamiya TCS Series racing Hard case is the same dimensions as a standard NiMH stick pack Lighter than a hardcase 2S LiPo pack of equal capacity  Improved power to weight ratio and a lower overall CG More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells  Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage Factory installed T-style plug NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes  Type Silicon Graphene   Voltage 7.6V nominal  Capacity @7.4V  5000mAh  Capacity @7.6V  5400mAh  Weight  235 g  Connector Type  T-style Balance Connector  3 Pin XH Number of Cells 2 Cell  Configuration 2S1P  Dimensions (WxLxH) 46.7x137.5x24.2mm  Maximum Charge Rate 10C (50A)  Burst Current  100C  Watt Hour @7.6V  38Wh  Includes: (1) ProTek R/C Battery LITHIUM POLYMER SAFETY INFORMATION  IMPORTANT:  DO NOT leave the battery in your model when charging DO NOT leave unattended when charging  ALWAYS balance charge the battery  ALWAYS use a LiPo charging bag  YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)  YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery  NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on April 16, 2021

Read more less

DYNB0012, Dynamite 2S LiPo Battery (7.4V/350mAh) The Dynamite 7.4v 350mAh 2S LiPo Battery is intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one 2S LiPo to replace the kit supplied battery. This product was added to our catalog on June 5, 2021

Read more less

TRA2821, Traxxas 2S "Power Cell" 20C Lipo Battery w/iD Connector (7.4V/750mAh) This product was added to our catalog on October 3, 2022  

Read more less

TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh) This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need batteries and a charger for your Traxxas vehicle that runs either one or two 2S LiPo batteries. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries on hand for extended driving excitement. iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. Traxxas' Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power. TRA2972 Charger Specifications: AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575g Dimensions: 176x138x57mm TRA2869X Battery Specifications: Type: LiPo Total Capacity: 7600 Voltage: 7.4 Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 155x27x43mm Weight: 13.8oz (390g) Includes: (1) TRA2972: Dual iD Battery Charger (2) TRA2869X: 7600mAh 2S 25C LiPo Battery w/iD COMPATIBILITY Traxxas E-Revo Traxxas E-Revo VXL 2.0 Traxxas Slash 2wd Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Spartan Traxxas Summit 1/10 Traxxas TRX-4 Traxxas TRX-4 Traxxas Unlimited Desert Racer Traxxas X-Maxx This product was added to our catalog on September 7, 2021

Read more less

GEA8502S60E2, Gens Ace 2S LiPo Battery 60C (7.4V/850mAh) w/EC2 Connector (Losi Mini-B) GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Specifications: Nominal Voltage: 7.4V (2S) Capacity: 850mAh Maximum Charge Rate: 1C (0.85A) Discharge Rate: Continuous: 60C Peak: (Not Available) Cell Configuration: 2S1P Watt Hours: 6.29Wh ROAR Approved: No Connector: Battery: EC2 Balance: XHR Dimensions (LxWxH): 2.28x1.26x0.79in (58x32x20mm) Weight: 2.01oz (57g) This product was added to our catalog on April 4, 2023

Read more less

roTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/6400mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 6400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 219 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on January 2, 2024

Read more less

SPMX50002S30H3, Spektrum RC 2S Smart LiPo Hard Case Battery Pack w/IC3 Connector (7.4V/5000mAh) Spektrum Smart technology LiPo Batteries practically take care of themselves. When combined with a Spektrum™ Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant it’s connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition! Spektrum Smart technology puts you in complete control, makes you more aware and more confident about the capability of your equipment—all the while making your hobby easier. The combined result will make you wish everything about your hobby was “smarter.” You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger “Start” button. Smart technology takes care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3™ or IC5™ output connector that’s conveniently compatible with older devices equipped with robust EC3™ and EC5™ connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.Spektrum Smart LiPo Batteries Store Unique Data, such as: Battery Brand Battery Type Battery Capacity Battery C Rating Individual Cell Voltage Battery Temperature Charge/Discharge Cycles Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you’ve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the “Start” button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings. Features Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy Integrated Microchip Stores Unique Parameters for Each Battery IC3 and IC5 Connectors are Compatible with EC3 and EC5 Save Time and Hassle, while Improving Battery Life Smart Discharge Allows Batteries to Automatically Discharge to a Safe Voltage Specifications: Type: Smart LiPo Capacity: 5000 mAh Voltage: 7.4V Connector Type: IC3 Cell Size: 3.7V Number of Cells: 2 Weight: 0.65 lbs. (294g) Configuration: Hardcase Dimensions (WxLxH): 5.5 x 1.8 x 1.0 in. (139 x 46 x 25mm) Length: 5.5 in. (139mm) Width: 1.8 in. (46mm) Height: 1.0 in. (25mm) Application: Surface Maximum Continuous Discharge : 30C CHARGING NOTE: This battery can only be safely charged with a Spektrum Smart Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Spektrum Smart Battery Charger.   This product was added to our catalog on March 20, 2021

Read more less

Key Features Fits most 1/8 and 1/10-scale vehicles 3C charge rating for quick, safe recharging Hard plastic case for increased durability and reliability One year limited warranty beginning at date of purchase Reaction 2.0 Dynamite's new Reaction 2.0 batteries come with all the power and performance you've come to expect from the original Reaction line, but now include a QR code directly on the battery label. You can scan the QR with the Dynamite Dashboard Smart Phone App for even quicker and easier setup. In addition, all Reaction 2.0 hardcase batteries now come in a sleek black color to better match whatever setup you use them in.

Read more less

TRA2827X, Traxxas 3000Mah 7.4V 2-Cell Lipo Battery This product was added to our catalog on September 8, 2023

Read more less

SPMX3002S30, Spektrum RC 2S 30C LiPo Battery Pack w/PH Connector (7.4V/300mAh) Spektrum RC 2S 30C LiPo Battery Pack with PH Connector. This battery is a great option for E-flite UMX Airplanes requiring a 2S LiPo Battery. Package includes one LiPo battery. Specifications: Voltage: 7.4V / 2S Capacity: 300mAh Connector Type: PH Length: 1.65" (42 mm) Width: 0.74" (19 mm) Height: 0.47" (12 mm) Weight: 17g Discharge Lead Length: 2" (51 mm) Maximum Continuous Discharge Rate: 30C (9 Amps) Maximum Charge Rate: 0.9 Amps (3C) This product was added to our catalog on April 27, 2022

Read more less

SPMX40002SRX, Spektrum RC 2S Smart LiPo Battery Pack (7.4V/4000mAh) w/IC3 Connector This is a Spektrum 2S Smart LiPo Battery Pack with IC3 Connector Spektrum Smart technology LiPo Batteries practically take care of themselves. When combined with a Spektrum Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant it’s connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition! Spektrum Smart technology puts you in complete control, makes you more aware and more confident about the capability of your equipment—all the while making your hobby easier. The combined result will make you wish everything about your hobby was “smarter.” You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger “Start” button. Smart technology takes care of the rest. Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector that’s conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious. Spektrum Smart LiPo Batteries Store Unique Data, such as: Battery Brand Battery Type Battery Capacity Battery C Rating Individual Cell Voltage Battery Temperature Charge/Discharge Cycles Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you’ve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the “Start” button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings. Features: Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy Integrated Microchip Stores Unique Parameters for Each Battery IC3 and IC5 Connectors are Compatible with EC3 and EC5 Save Time and Hassle, while Improving Battery Life Smart Discharge Allows Batteries to Automatically Discharge to a Safe Voltage Specifications: Type: LiPo (3.7V per cell) Voltage: 7.4V (2S) Capacity: 4000mAh Connector Type: IC3 Wire Gauge: 13 AWG Watt Hours: 14.8 Maximum Charge Current: 1.5C Maximum Charge Rate: 6.0A Lead Length: 3.5" (90mm) Length: 3.4" (86mm) Width: 1.3" (34mm) Height: 1.2" (30mm) Weight: 6oz (170g) Charge Protection Circuitry: Yes Technology: Smart Application: Receiver Pack This product was added to our catalog on February 22, 2022

Read more less

DYNB1822H3, Reaction2 7.4V 1800mAh 2S 20C LiPo, Hardcase EC3

Read more less

DYNB0110, Dynamite Jet Jam Pool Racer 2S Li-Ion Battery (7.4V/1500mAh) This is a replacement Dynamite 7.4V 1500mAh Jet Jam Pool Racer 2S Li-Ion Battery, intended for use with the Jet Jam Pool Racer. Specifications: Approximate Assembly Time: No assembly required Beam: 4.5 in (114.3mm) Boat Type: Deep-V Completion Level: Ready-To-Run Drive System: Jet Drive Hull Height: 3 in (76.2mm) Hull Material: Injection Molded ABS Length: 12 in (304.8mm) Motor Size: 390 Brushed Radio: Pro Boat 2.4GHz Recommended Battery: 1500mAh 7.4 LiIon Scale: 12 inch Speed Control: 2 in 1 Brushed ESC/RX Steering: Jet Drive Trim Scheme Colors: Orange with 3 Decal Options Type: RTR Deep V Jet Boat Weight: 1 lb (0.5kg) This product was added to our catalog on July 30, 2021

Read more less

SPMX6502SH2, Spektrum RC 7.4V 650mAh 2S 30C LiPo Battery: IC2 Specifications Battery Type LiPo (3.7V per cell) Connector Type IC2 Hard Case Yes Capacity 650mAh Battery Voltage 8.4V Charge Protection Circuitry Yes   This product was added to our catalog on March 16, 2023.

Read more less

BLH4421, Blade 2S 15C LiPo (7.4V/320mAh) Blade 2S 15C 7.4V 320mAh LiPo. This is a replacement battery intended for the Blade 150 FX helicopter. Package includes one 2S 7.4V 320mAh LiPo battery. This product was added to our catalog on October 3, 2022

Read more less

SPMX22002SLFRX, Spektrum RC 2200mAh 2S 6.6V Smart LiFe Receiver Battery; IC3 Specifications: Type: LiFe Voltage: 6.6V Connector Type: IC3 Number of Cells: 2 Weight: 3oz (85g) Configuration: 2S2P Length: 4.1" (105mm) Width: 1.3" (33mm) Height: 0.69" (17.5mm) Application: Receiver Pack Maximum Continuous Discharge : 3.3A Maximum Continuous Current : 1.5C This product was added to our catalog on May 30, 2021

Read more less

XTA-XS-57022, Xtra Speed Scale LiPo Battery Voltage Checker w/Alarm (2S/3S) The Xtra Speed Scale LiPo Battery Voltage Checker is a multi-purpose scale accessory. This voltage checker replicates the look of a 12V battery, but features a display on the side that lets you keep an eye on your battery voltage. The voltage checker also features an alarm that will sound when your battery voltage drops too low. Additionally, cables are included to fit both 2S and 3S batteries through the balance port.  Features: Molded plastic scale 12V battery voltage checker Voltage display and alarm  Fits 2s and 3s batteries Includes:  (1) Lipo checker  (3) Cables  This product was added to our catalog on December 16, 2021

Read more less