Products
Traxxas 78097-4, Traxxas XRT Ultimate 8S Extreme 4WD Brushless RTR Race Truck w/2.4GHz TQI Radio & TSM
78097-4, Traxxas XRT Ultimate 8S Extreme 4WD Brushless RTR Race Truck w/2.4GHz TQI Radio & TSM The Traxxas XRT 8S Extreme 4WD Brushless RTR Race Truck is an "In-Store" exclusive designed with a focus on speed, handling and performance. The low CG chassis features an ultra-wide stance, all-metal drivetrain, race tires, clipless body and much more! Head to your local Hobby Shop and inquire about the Traxxas XRT 8S Electric Race Monster Truck. Features: VXL-8s Waterproof Electronic Speed Control Velineon 1200XL Brushless Motor Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear X-Maxx Spec 8s Drivetrain X-Maxx Spec 8s Differentials GTX Adjustable Race Shocks WideMaxx Suspension Low-CG Chassis Design Patent-Pending Clipless Body System Heavy-Duty Bumpers 7.4" Gravix Race Tires Huge 24mm Splined Wheel Hexes Powerful 365oz-in Steering Servo Specifications: Scale: X-Truck Length (including wing): 31.41 inches (798mm) Front/Rear Track Width: 23.43 inches (595mm) Height: 10.15 inches (258mm) - ride height Wheelbase: 18.9 inches (480mm) Ground Clearance: 1.93 inches (49mm) Weight: 19.70 pounds (8.94kgs) (less body and batteries) Speed Control: Velineon® VXL-8s Motor (electric): Velineon® 1200XL Brushless Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear) Gear Pitch (Spur and Pinion): Module 1.0 Battery Tray: 186mm x 51mm x 44mm Skill Level: 5 Includes: (1) XRT 8S Extreme 4WD Brushless RTR Race Truck Needed to Complete: (4) AA Batteries for the Transmitter (2) 4S LiPo Batteries with Traxxas iD Connector (TRA2890X - Recommended) Compatible LiPo Balance Charger (TRA2973 - Recommended) This product was added to our catalog on December 18, 2023
$1,499.99
Hot Racing HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)
HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features: CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear Specifications: Overall diameter: 52.8mm Gear face width: 8mm Includes: One (1) mod 1 steel spur gear This product was added to our catalog on December 16, 2021
$30.99
Hot Racing HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T)
HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T) This product was added to our catalog on December 16, 2021
$30.99
Hot Racing HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T)
HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT This product was added to our catalog on December 16, 2021
$30.99
Pro-Line PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2)
PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2) The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982 This product was added to our catalog on May 16, 2021
$99.99
Pro-Line PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex
PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires are a lightweight, belted tire option for X-MAXX and KRATON 8S trucks. Pro-Line Masher X HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! The Raid 5.7" Black Wheel features a 24mm hex with the standard 1/5 scale through-hole to fit most 1/5 scale vehicles and includes machined aluminum wheel washers to fit onto the popular X-MAXX platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has a bold style to match. The Masher X HP tires are made from Pro-Line's legendary M2 compound for unmatched grip on the dirt, street, grass, and gravel. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA! NOTE: Masher X HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over-revving your Masher X HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.* Features: Highest Performance Large Scale Tire and Wheel Combo Ever Conceived Lightweight, BELTED and extremely Durable Futurist Chevron Monster Truck Style Tread and Sidewall Detail Belted Tire Handles Extremes Power and High Speeds with Ease 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Maximum All-Terrain Traction Easily Replace Damaged Hexes Made from High-strength, Durable DuPont Nylon Material Raid Wheel with Replaceable 24mm Hexes to fit KRATON 8S or X-MAXX Made in the USA, Since 1982 Specifications: Scale: 1/6 & 1/5 Inner Tire / Outer Wheel Diameter: 5.7" Wheel Hex Size: 24mm Track Surface: All-Terrain Width: 3.77" (96mm) Height: 8.2" (208mm) Weight: 724g (1.59lbs) Approx. Includes: (2) Masher X HP Belted 5.7"Tires Pre-Mounted on Black Raid with 24mm wheels hex (2) KRATON 8S 8x48 24mm Wheel Hexes (2) X-MAXX 8x48 24mm Wheel Hexes (16) M3x16 Socket Head Screws Compatibility Arrma Kraton 8S BLX Arrma Outcast 8S BLX Traxxas X-Maxx Traxxas XRT This product was added to our catalog on June 16, 2023
$94.99
Pro-Line PRO1017611, Pro-Line 1/5 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex
PRO1017611, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex Arrma Kraton 8S BLX Arrma Outcast 8S BLX Traxxas X-Maxx Traxxas XRT Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires are a lightweight, belted tire option for X-MAXX and KRATON 8S trucks. Pro-Line Masher X HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! The Raid 5.7" Black Wheel features a 24mm hex with the standard 1/5 scale through-hole to fit most 1/5 scale vehicles and includes machined aluminum wheel washers to fit onto the popular X-MAXX platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has the bold style to match. The Masher X HP tires are made from Pro-Line's legendary M2 compound for unmatched grip on the dirt, street, grass, and gravel. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA! NOTE: Masher X HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over revving your Masher X HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.* Features: Highest Performance Large Scale Tire and Wheel Combo Ever Conceived Lightweight, BELTED and eXtremely Durable Futurist Chevron Monster Truck Style Tread and Sidewall Detail BELTED Tire Handles eXtreme Power and High Speeds with Ease 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX Platform Legendary M2 Tire Compound for Maximum All-Terrain Traction Foam Inserts Included Made in the USA, Since 1982 Fits KRATON™ 8S, X-MAXX® and Other Large Scale Vehicles with 24mm Hex Specifications: Product Height: 8.2" (208 mm) Product Weight: 724g (1.59lbs.) Product Width: 3.77" (96 mm) Scale: 1/5 Tire Compound: M2 (Medium) Wheel Hex Size: 24mm This product was added to our catalog on November 30, 2021
$89.99
Pro-Line PRO281200, Pro-Line Rock Shooter 1.0" Brass Crawler Wheels (Black)(2)
PRO281200, Pro-Line Rock Shooter 1.0" Brass Crawler Wheels (Black)(2) 1.0" Brass Crawler Wheels Overview: The Pro-Line Rock Shooter 1.0" Brass Crawler Wheels are a pair of heavy-duty wheels designed for the SCX24 and other mini-crawlers. Crafted from CNC machined Brass, these wheels offer the lowest center of gravity possible. The internal bead-loc wheel components are all made of high-quality brass, adding substantial weight to enhance performance. With a sleek black finish on both inner and outer faces, these wheels not only perform but also add a stylish touch to your crawler. Weighing 36g per assembled wheel, they provide a significant upgrade over plastic wheels, reducing backward tip-overs on inclines and improving suspension articulation on rough terrain. Features: Massive Performance Upgrade: Designed for mini crawlers, these wheels offer a substantial performance boost Limits Backward Roll-Overs: Added weight reduces the chances of tip-overs on steep inclines Black Finished Brass Faces: Inner and outer faces have a stylish black finish Raw Brass Inner Bead-loc Ring: Adds to the weight and provides a unique look Super Scale Looks: Enhances the overall appearance of your crawler Easy Assembly: Only requires 3 screws per wheel for hassle-free setup Specifications: Wheel Size: 1.0" Weight: 36g each Hex Size: 7mm Includes: (2) Rock Shooter 1.0" Brass Crawler Wheels This product was added to our catalog on February 6, 2024
$39.99
StupidRC Parts STP10113, Motor Mount/Center Brace SUPER Duty XO-1
STP10113, Motor Mount/Center Brace SUPER Duty XO-1 Introducing the StupidRC XO-1 Motor Mount and Center Brace – Precision Engineering for Unrivaled Performance! Are you ready to take your XO-1 to the next level of power and stability? Look no further than the StupidRC XO-1 Motor Mount and Center Brace, the ultimate upgrade for your high-speed RC racing machine. This precision-engineered component is designed to enhance your XO-1's performance, ensuring it remains at the forefront of innovation and speed. Key Features: 1. **Unparalleled Strength and Durability**: Crafted from high-grade materials, the XO-1 Motor Mount and Center Brace offers unbeatable strength and durability. It's built to withstand the incredible forces generated by the powerful motor, ensuring longevity and reliability during every thrilling race. 2. **Enhanced Stability**: The center brace not only provides rock-solid support for your motor but also enhances the chassis's overall rigidity. This results in improved stability and handling, allowing you to push your XO-1 to its limits with confidence. 3. **Perfect Fit**: Engineered to be a direct replacement for the stock motor mount and center brace, installation is a breeze. No complicated modifications are needed; simply bolt it on and get ready to experience a dramatic improvement in performance. 4. **Designed for Speed**: The XO-1 Motor Mount and Center Brace are specifically engineered for high-speed applications. The sleek design minimizes aerodynamic drag, contributing to the XO-1's renowned top-speed capabilities. 5. **Wide Range**: Fits most 1/5 scale motors (56m and 58mm diameters) and most ESCs (MAX5, XLX2). 6. **Gearing**: Up to 60T pinion gears supported. Includes: - Motor mount with precision adjustment screw - Reinforced Center Brace - Esc Plate This product was added to our catalog on December 7, 2023
$79.99
StupidRC Parts STP1024, Traxxas XRT Compatible Motor Mount/Center Brace SUPER Duty
Traxxas Compatible XRT Motor Mount w/ Center Brace Super Duty Features: Traxxas Compatible XRT Adjustable Motor Mount without motor removal Rear support to avoid motor bending Precision adjustment screw for gear mesh Supports Caste 2028, Tp Power and all 1/5 Motors Supports MAX5, XLX2 and Mamba Monster X 8S Center Brace developed to reinforce the chassis and hold the Esc Motor, ESC and On/off key holder 1/4 inch esc plate and 3/8 inch motor mount made from naval aluminum. Supports pinions up to 45 teeth. This product was added to our catalog on January 24, 2024
$125.99
StupidRC Parts STP1025, StupidRC Traxxas Compatible XRT 12S Extreme Series Motor Mount/Center Brace Kit
STP1025, Traxxas Compatible XRT 12S Extreme Series Motor Mount/Center Brace Kit StupidRC Unique and Exclusive 12S Conversion Kit - Traxxas Compatible XRT MAX4/XLX2 12S Motor Mount with Center Brace Super Duty Features: Traxxas XRT Compatible kit Adjustable Motor Mount without motor removal Rear support to avoid motor bending Precision adjustment screw Supports Hobbywing EZRUN 70125 560KV, Caste 2028, Tp Power and most 1/5 Motors Supports MAX4, MAX5, XLX2 and Mamba Monster X 8S Center Brace developed to reinforce the chassis and hold the Esc Motor, ESC and cable organizer 1/4 inch esc plate and 3/8 inch motor mount made from naval aluminum. Supports pinions up to 60 teeth. This product was added to our catalog on September 27, 2023
$152.99
Fast Eddy Bearings TFE8074, Traxxas XRT Sealed Bearing Kit
TFE8074, Traxxas XRT Sealed Bearing Kit Traxxas Compatible XRT Sealed Bearing Kit (6) 5x11x4 (2) 6x13x5 (7) 10x15x4 (1) 12x18x4 (6) 15x24x5 (6) 17x26x5 (4) 20x32x7
$32.99
Traxxas TRA2085, Traxxas 2085 Digital High Torque Waterproof Servo (X-Maxx/XRT Mount)
TRA2085, Traxxas 2085 Digital High Torque Waterproof Servo (X-Maxx/XRT Mount) This product was added to our catalog on May 7, 2021
$79.99
Traxxas TRA2085R, Traxxas X-Maxx, XRT, and Maxx Servo, digital high-torque/high-speed, metal gear
TRA2085R, Traxxas X-Maxx, XRT, and Maxx Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof High Torque: 650 oz-in 78% more torque than stock 2085 High Speed: 0.13 sec/60° 30% faster than stock 2085 All metal gears with steel output gear and spline Blue-anodized aluminum center case Dual ball bearings Includes metal steering link and heavy duty servo saver spring Fits X-Maxx, XRT, and Maxx This product was added to our catalog on May 7, 2021
$139.99
Traxxas TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo
TRA2085X, Traxxas X-Maxx/XRT/Maxx Waterproof Digital High-Torque Servo This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link. The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving. Accessory part for these models: Traxxas Maxx Traxxas X-Maxx Traxxas XRT This product was added to our catalog on May 7, 2021
$99.99
Traxxas TRA2598X, Traxxas 4x30mm Button Head Hex Screw (6)
TRA2598X, Traxxas 4x30mm Button Head Hex Screw (6) This product was added to our catalog on September 7, 2021
$3.25
Traxxas TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh) This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specifications: Type: LiPo Total Capacity: 5000mAh Voltage: 14.8V C Rating: 25 Length: 155mm Height: 34mm Width: 45mm Weight: 16.8g This product was added to our catalog on April 7, 2021
$99.95
Traxxas TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh) The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle. Features: Traxxas High-Current Connectors Integrated LiPo Balance Charging Wires Semi-Rigid Construction for efficient packaging Oversized Discharge Tabs for minimum resistance Hard-wired 12-gauge Maxx Cable soldered to cells Center Wire Exit for guaranteed proper fitment (L) 185mm x (W) 50mm x (H) 44mm 675 Grams (average) Accessory part for these models: Traxxas Maxx Traxxas Unlimited Desert Racer Traxxas X-Maxx Traxxas XRT This product was added to our catalog on April 7, 2021
$139.99
Traxxas TRA3362X, Traxxas Velineon 1200XL Low Profile Heat Sink
TRA3362X, Traxxas Velineon 1200XL Low Profile Heat Sink Traxxas Velineon 1200XL Low Profile Heat Sink. This is a replacement heat sink used on vehicles such as the Traxxas XRT race truck that utilize the Velineon 1200XL brushless motor. Package includes one low profile heat sink. This product was added to our catalog on May 19, 2023
$20.00
Traxxas TRA3475, Traxxas Velineon VXL-8S Cooling Fan
TRA3475, Traxxas Velineon VXL-8S Cooling Fan Fits: Traxxas Maxx Traxxas Sledge Traxxas X-Maxx Traxxas XRT This product was added to our catalog on May 7, 2021
$20.00
Traxxas TRA3491, Traxxas Velineon 1200XL Brushless Sensorless Motor (X-Maxx/XRT)
TRA3491, Traxxas Velineon 1200XL Brushless Sensorless Motor (X-Maxx/XRT) Traxxas Velineon 1200XL 1275kV Brushless Sensorless Motor. This replacement motor is intended for the Traxxas X-Maxx and XRT 8S monster truck platforms. Package includes one Velineon 1200XL 1275kV brushless Sensorless motor. This product was added to our catalog on September 7, 2021
$249.99
Traxxas TRA5196A, Traxxas X-Maxx/XRT 20x32x7mm Black Rubber Sealed Bearing (2)
TRA5196A, Traxxas X-Maxx/XRT 20x32x7mm Black Rubber Sealed Bearing (2) This product was added to our catalog on September 7, 2021
$12.00
Traxxas TRA5196X, Traxxas X-Maxx/XRT 2x32x7mm Stainless Black Rubber Sealed Bearing (2)
TRA5196X, Traxxas X-Maxx/XRT 2x32x7mm Stainless Black Rubber Sealed Bearing (2) This product was added to our catalog on May 7, 2021
$20.00
Traxxas TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T)
TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T) Traxxas Machined Mod 1.0 Pinion Gear with 5mm Bore. This is an optional machined pinion gear intended for the Traxxas E-Revo 2.0 and the Traxxas Maxx. The gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one pinion gear.NOTE: For use with steel spur gears. Traxxas E-Revo VXL 2.0 Traxxas X-Maxx Traxxas XO-1 Traxxas XRT This product was added to our catalog on September 7, 2021
$10.00
Traxxas TRA6552, Traxxas X-Maxx/XRT Expander Box Seal Kit
TRA6552, Traxxas X-Maxx/XRT Expander Box Seal Kit This product was added to our catalog on September 7, 2021
$4.00
Traxxas TRA6590, Traxxas High-Voltage Power Amplifier
TRA6590, Traxxas High-Voltage Power Amplifier This is a Traxxas High-Voltage Power Amplifier, intended for use as a replacement with the Unlimited Desert Racer and as an accessory part for the Maxx and X-Maxx kits. This will allow you to change lighting modes on the fly when using the Traxxas Link app. This product was added to our catalog on March 20, 2020
$55.00$49.99
Traxxas TRA7720X, Traxxas Front Upper Bulkhead (XRT/X-Maxx)
TRA7720X, Traxxas Front Upper Bulkhead (XRT/X-Maxx) Traxxas Front Upper Bulkhead. This replacement upper bulkhead is intended for the front of the Traxxas XRT or X-Maxx. Package includes one bulkhead. This product was added to our catalog on March 11, 2022
$5.00
Traxxas TRA7724, Traxxas X-Maxx/XRT Receiver Box Set
TRA7724, Traxxas X-Maxx/XRT Receiver Box Set This product was added to our catalog on September 7, 2021
$6.00
Traxxas TRA7727R, Traxxas Rear Upper Bulkhead (X-Maxx/XRT)
TRA7727R, Traxxas Rear Upper Bulkhead (X-Maxx/XRT) Rear upper bulkhead fits 8s X-Maxx® and XRT® This product was added to our catalog on April 26, 2021
$5.00
Traxxas TRA7740, Traxxas X-Maxx/XRT Hardened Steel Suspension Pin Set (1x 4x85mm, 3x 4x47mm & 2x 4x33mm)
TRA7740, Traxxas X-Maxx/XRT Hardened Steel Suspension Pin Set (1x 4x85mm, 3x 4x47mm & 2x 4x33mm) This product was added to our catalog on May 7, 2021
$8.00
Traxxas TRA7743, Traxxas X-Maxx/XRT Suspension Pin Retainer (4)
TRA7743, Traxxas X-Maxx/XRT Suspension Pin Retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. This product was added to our catalog on September 7, 2021
$2.50
Traxxas TRA7746X, Traxxas X-Maxx/XRT Steel Steering Link w/HD Servo Saver Spring
TRA7746X, Traxxas X-Maxx/XRT Steel Steering Link w/HD Servo Saver Spring This product was added to our catalog on April 17, 2021
$8.00
Traxxas TRA7751X, Traxxas X-Maxx/XRT Constant Velocity Driveshaft Rebuild Kit (use with TRA7750X)
TRA7751X, Traxxas X-Maxx/XRT Constant Velocity Driveshaft Rebuild Kit (use with TRA7750X) This is the Traxxas X-Maxx/XRT Constant Velocity Driveshaft Rebuild Kit for use with the X-Maxx Heavy Duty Driveshafts (TRA7750X). Kit includes the parts to service two driveshafts. This product was added to our catalog on May 7, 2021
$4.00
Traxxas TRA7754R, Traxxas Drive Cup Steel HD/3X8mm CS Use #7750X
TRA7754R, Traxxas Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated) This product was added to our catalog on October 28, 2022
$42.00
Traxxas TRA7754X, Traxxas X-Maxx/XRT Drive Cup (8S Spec)
TRA7754X, Traxxas X-Maxx/XRT Drive Cup (8S Spec) This is a replacement Traxxas X-Maxx/XRT Drive Cup for use with the 8S-spec heavy duty driveshaft (TRA7750X) only. This product was added to our catalog on September 7, 2021
$12.00
Traxxas TRA7755, Traxxas X-Maxx/XRT Aluminum Center Driveshaft Assembly
TRA7755, Traxxas X-Maxx/XRT Aluminum Center Driveshaft Assembly Replacement part for these models: Traxxas XRT Traxxas X-Maxx This product was added to our catalog on September 7, 2021
$12.00
Traxxas TRA7756, Traxxas X-Maxx/Traxxas XRT Wheel Hex Hub (2)
TRA7756, Traxxas X-Maxx/Traxxas XRT Wheel Hex Hub (2) This is a pack of two replacement Traxxas X-Maxx or Traxxas XRT Wheel Hex Hubs, with two included hex clips. This product was added to our catalog on May 7, 2021
$3.00
Traxxas TRA7757, Traxxas X-Maxx/XRT Wheel Hex Clip (6)
TRA7757, Traxxas X-Maxx/XRT Wheel Hex Clip (6) This is a pack of six replacement Traxxas X-Maxx or XRT Wheel Hex Clips, used to secure the hex to the stub axle. This product was added to our catalog on September 7, 2021
$3.00
Traxxas TRA7760, Traxxas X-Maxx/XRT Front & Rear Motor Mount Set
TRA7760, Traxxas X-Maxx/XRT Front & Rear Motor Mount Set This product was added to our catalog on September 7, 2021
$8.00
Traxxas TRA7762X, Traxxas X-Maxx GTX Shocks Rebuild Kit (2)
TRA7762X, Traxxas X-Maxx GTX Shocks Rebuild Kit (2) Traxxas X-Maxx GTX Shocks Rebuild Kit. This is an optional rebuild kit intended for the GTX shocks used on the Traxxas X-Maxx and XRT. This kit includes the necessary parts needed to rebuild two shocks. This product was added to our catalog on March 6, 2021
$8.00
Traxxas TRA7767, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Blue) (4)
TRA7767, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Blue) (4) This product was added to our catalog on September 7, 2021
$25.00
Traxxas TRA7767-ORNG, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Orange) (4)
TRA7767-ORNG, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Orange) (4) This product was added to our catalog on September 7, 2021
$25.00
Traxxas TRA7767G, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Green) (4)
TRA7767G, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Green) (4) This product was added to our catalog on September 7, 2021
$25.00
Traxxas TRA7767R, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Red) (4)
TRA7767R, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Red) (4) This product was added to our catalog on September 7, 2021
$25.00
Traxxas TRA7767X, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Black) (4) (Hard Anodized)
TRA7767X, Traxxas X-Maxx/XRT Aluminum GTX Threaded Collar (Black) (4) (Hard Anodized) This product was added to our catalog on September 7, 2021
$28.00
Traxxas TRA7768G, Traxxas X-Maxx/XRT Aluminum Stub Axle (Green) (use with TRA7750X)
TRA7768G, Traxxas X-Maxx/XRT Aluminum Stub Axle (Green) (use with TRA7750X) This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This blue-anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) only. This product was added to our catalog on May 7, 2021
$15.00
Traxxas TRA7768R, Traxxas X-Maxx/XRT Aluminum Stub Axle (Red) (use with TRA7750X)
TRA7768R, Traxxas X-Maxx/XRT Aluminum Stub Axle (Red) (use with TRA7750X) Stub axle, aluminum, (red-anodized) (1) (for use only with #TRA7750X or TRA7896 driveshaft). Add a touch of style to your X-Maxx or XRT with this brightly-anodized aluminum stub axle. This product was added to our catalog on September 7, 2021
$15.00
Traxxas TRA7772X, Traxxas XRT/X-Maxx Pre-Mounted Tires & Wheels (Black) (2) (8S Rated)
TRA7772X, Traxxas XRT/X-Maxx Pre-Mounted Tires & Wheels (Black) (2) (8S Rated) This is a pack of two Traxxas Pre-Mounted Tires and Wheels for use with the X-Maxx equipped with up to 8S power. These assembled and glued Maxx AT 8.0x4.0" tires include foam inserts and black wheels. Package includes one left and one right side tire and wheel assembly. This product was added to our catalog or updated on April 4, 2022
$70.00
You have seen 48 out of 111 products