All batteries must be shipped by a ground shipping method. Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft. Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. Specifications Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC V2.2 (ELRS 2.4G) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Downloads FC Firmware and ESC download   Includes 1 x Cetus X Brushless Quadcopter 1 x BT2.0 Battery Charger and Voltage Tester 2 x BT2.0 450mAh 1S 30C Battery 1 x Phillips Screwdriver 1 x Prop Removal Tool 1 x Type-C Adapter 4 x Gemfan 2020 4-Blades Props  

Read more less

All batteries must be shipped by a ground shipping method. Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop. Easy to carry on and ready to fly. What are you waiting for? Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features 3 Flight modes Altitude hold and emergency landing functions Storage case FrSky D8 protocol drone and radio Brushed drone, easy to fly Specifications Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C01 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Brushed Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 300mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 4x 31mm 4-Blade Props 1x Portable Storage Bag User Manual

Read more less

All batteries must be shipped by a ground shipping method. The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 450mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train. With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. Specifications BetaFPV LiteRadio 2 Frequency Range: 2.4GHz (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8 Power: ≤100mw Adapted Drone Type: Multirotor Support USB Charging / Firmware Update Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: Built-in 1000mAh 1S Battery Charging Connector: Type-C BetaFPV VR02 Goggles Screen Size: 4.3" Screen Resolution: 800x480p Screen Brightness: 300cd/m2 Field of View: 55° Charging Port: USB-C Input Voltage: 3.7V 500mA Internal Battery: 3.7V 2000mAH Dimensions: 143x126x86.3mm Weight: 300g BetaFPV RTF Cetus Pro Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Propeller: 40mm 3-blade 1.5mm shaft hole Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Pro Brushless Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 450mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 1x Portable Storage Bag

Read more less

All batteries must be shipped by a ground shipping method.  Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection! Features Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon. Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here. Various Modes, Accessible to All Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. BETAFPV Cetus Series The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus) VTX: M04 25-400mW VTX Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery: 2x BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Includes 1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver) 1x LiteRadio 3 Transmitter (ELRS 2.4G) 1x BETAFPV VR03 FPV Goggles  4x BT2.0 450 mAh 1S Lipo Battery  1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C to FC Adapter 1x Prop Removal Tool 4x Gemfan 2020 4-Blades Prop (Spare Set) 1x Portable Storage Bag FAQ For more info and instructions, please check the User Manual for Cetus X FPV Kit. Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.

Read more less

BFPV-00313881, BetaFPV Cetus FPV RTF Drone Combo Kit The Cetus FPV Kit offers an exceptional opportunity for FPV beginners to explore the thrilling world of First-Person-View flying. This all-inclusive kit, comprising the Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, brings everything you need for an immersive FPV experience. The auxiliary flight function makes it a breeze for everyone to take to the skies, greatly reducing the learning curve for newcomers. With three distinct flight modes Normal, Sport, and Manual, with three speed settings, the Cetus FPV Kit can cater to a wide range of pilot preferences and flight environments. The Cetus quadcopter features an altitude hold function that simplifies flying and ensures stable indoor hover, thanks to an accurate barometer and laser system. Additionally, it boasts self-protection mechanisms for emergency landings and automatic motor disarming in the event of a collision. The LiteSilver system within the quadcopter integrates Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor for optimal performance. The LiteRadio2 SE transmitter, with its built-in 1000mAh 1S battery, offers an impressive 8-hour endurance, making it ideal for extended flight sessions. The VR02 FPV Goggles provide an immersive FPV experience, featuring high-quality antennas for clear, stable reception, ergonomic design for comfort, and simplicity of operation. The Cetus FPV Kit is the perfect entry point into FPV flying for beginners and a robust choice for enthusiasts. Features: Perfect for indoor fun 3 Flight modes Normal, Sport, and Manual Mode Self-developed LiteSilver System Self-protection Function Auto hold hovering Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported Specifications: Weight: 1.23oz (35g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25mW Camera: CO2 FPV Micro Goggles: VR02 Propeller: 31mm 4-Blade w/0.8mm Shaft Motor: 716-19000KV Brushed Motor Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus FPV Kit  (1) LiteRadio2 SE Transmitter (1) VR02 FPV Goggles (1) CO2 FPV Micro Camera (2) BT2.0 3.7V 300mAh 1S Lipo Battery Charger and voltage tester (4) Spare 31mm 4-Blade props (1) Portable storage bag Needed to Complete: Everything you need is included This product was added to our catalog on October 21, 2023

Read more less

BFPV-01020005_2, BetaFPV Cetus X FPV RTF Drone Combo Kit w/BetaFPV Cetus Flight Controller The Cetus X FPV Kit is designed for both seasoned pilots and newcomers, offering an advanced 2S power whoop bundle that propels your FPV experience to new heights. Comprising the Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, it's a complete package to elevate your FPV game. With the inclusion of the latest BT2.0 450mAh 1S Battery, you'll enjoy extended flight times and higher discharge rates. This kit unlocks a new level of control and flying experience, featuring unparalleled control and extended radio and video transmission. It's a fantastic entry point for beginners to dive into the world of FPV, thanks to its accessibility and potential for growth. The Cetus X offers a variety of flight modes and speeds to suit different pilot preferences and flight environments The FPV kit combines cutting-edge components, including the Betaflight FC for powerful flight control, and The VR03 FPV Goggles are equipped with DVR recording, allowing pilots to capture and relive their most exciting moments. The Cetus X Brushless Quadcopter, combined with the advanced components in this kit, provides you with an outstanding FPV experience that's hard to match. The LiteRadio 3 SE transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 3 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots. Features: Perfect for indoor fun Flight modes Normal, Sport, and Manual Mode Turtle Mode makes crash recovery a breeze Self-developed LiteSilver System Auto hold hovering Powerful 2S compatibility Tilt Camera Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam Specifications: Wheelbase: 3.74in (95mm) Weight: 1.94oz (55g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25-400mW M04 Camera: CO4 FPV Micro Goggles: VR03 Propeller: Gemfan 2020 4-Blades  Motor: 1103-1100KV Brushless Motors Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus X FPV Kit  (1) LiteRadio 3 SE Transmitter (Frsky) (1) VR03 FPV Goggles (1) CO4 FPV Micro Camera (4) BT2.0 3.7V 450mAh 1S Lipo Battery Charger and voltage tester (4) Spare Gemfan 2020 4-Blades (1) Portable storage bag Needed to Complete: Everything you need is included This product was added to our catalog on October 21, 2023

Read more less

BFPV-01020010_5, BetaFPV Cetus Lite FPV RTF Drone Combo Kit The Cetus Lite FPV Combo is your gateway to the exciting world of FPV flying. This ready-to-fly kit is perfect for beginners, offering a safe and thrilling experience for both kids and adults. It features an auxiliary altitude hold function, making it easy for users to control and navigate. The durable frame, constructed from impact-resistant PA12 material, is equipped with a protective guard, ensuring safe flights indoors and outdoors. With the high-efficiency BT2.0 300mAh 1S battery, you can enjoy flights lasting around 4-5 minutes, and swapping batteries is a breeze. The Cetus Lite also includes a low-voltage prompt function to protect your battery. Automatic calibration simplifies your flying experience, ensuring stability every time you take off. With the Altitude Hold feature and the LiteRadio 1 transmitter, even newcomers can effortlessly control the quadcopter's height, while the included VR02 goggles provide an immersive FPV experience. The LiteRadio 1 transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 1 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots. Features: Perfect for indoor fun Auto disarming upon collisions Auto hold hovering Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam Specifications: Length: 3.5in (90mm) Width: 3.3in (85mm) Height: 1.7in (45mm) Weight: 1.26oz (36g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25mW Propeller: 31mm 4-Blade w/0.8mm Shaft Motor: 716-19000KV Brushed Motor Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus Lite (1) LiteRadio Transmitter (1) VR02 FPV Goggles (1) Cetus Lite Camera and VTX (2) BT2.0 3.7V 300mAh Lipo Battery Charger and voltage tester (4) Spare 31mm 4-Blade props (1) Spare 716 CCW Motor (1) Spare 716 CW Motor Needed to Complete: Nothing! Everything needed for lift off is included This product was added to our catalog on October 21, 2023

Read more less

EFL370001, E-flite Apprentice STS 1.5m RTF Basic Smart Trainer Electric Airplane (1500mm) w/SAFE Technology This E-flite Apprentice STS 1.5m Electric Airplane with SAFE technology is based on the popular learning platform of the Apprentice model. Its large size and 1.5 meter (59 inch) wingspan offers better visibility and the ability to handle more wind while learning to fly at an RC club flying field. Its inherently stable design plus SAFE (Sensor Assisted Flight Envelope) technology featuring Beginner, Intermediate and Experienced flight modes makes it easy to fly successfully, especially with the help of an instructor. Add an optional Spektrum Powerstage Bundle to this plane and get right into the adventure of flight with the E-flite Apprentice STS! Features: Perfect for first-time pilots, experienced pilots that teach others to fly and club training programs Official Trainer of the Academy of Model Aeronautics (AMA) and many clubs worldwide The ideal choice for new pilots when learning to fly with an instructor at an RC flying field Exclusive SAFE® technology makes it easy to learn to fly Easily upgrade to SAFE Plus GPS-enabled technology to add Auto-Land, Virtual Fence and Holding Pattern features Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings Wide-stance tricycle landing gear with steerable nose wheel Quick and easy assembly—no glue or special tools required Durable EPO construction that's tough yet lightweight Optional floats available for flying from water Specifications:Wingspan: 59" (1499 mm)Length: 42.5" (1080 mm)CG (Center of Gravity): 3.125" (79mm) from leading edge of wing measured at the fuselagePower Type: Electric Flying Weight: 1500-2000g Channels: 7 Motor Type: Brushless Completion Level: Ready-To-Fly Includes: (1) E-flite Apprentice STS 1.5m with: (1) Brushless Outrunner Motor (installed) (1) Smart 30A Brushless ESC (installed) (2) 13-gram Digital and (4) 37-gram Servos (installed) (1) Spektrum 3230 Flight Controller (installed) (1) Spektrum 4650 Serial Receiver (installed) (1) Spektrum DXS DSMX® 2.4GHz Transmitter (1) Product Manual Needed to Complete: (1) 3S 11.1V 3200–4000mAh LiPo battery with EC3 or IC3 connector (1) Compatible LiPo Charger This product was added to our catalog on June 12, 2023

Read more less

All products containing lithium batteries must be shipped by a ground shipping method. The TinyHawk II Freestyle RTF kit has literally everything you need to get started in the world of freestyle FPV! Quad, Goggles, Transmitter, Batteries, Charger and an awesome case to carry all of it. This kit is the best way to start from nothing and work your way up to learning more advanced freestyle tricks. It's also a great option if you're looking for a compact setup you can keep with you to rip a few quick packs wherever and whenever! Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver Battery Connector: JST-PH2.0 Duo FPV System VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)* Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk 2 Freestyle Drone 1x E6 Transmitter 1x Transporter Goggles w/ Battery + Antennas 2x EMAX 450mAh 1S HV Battery 1x 1S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Carbon Fiber Carrying Case *Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the mot  

Read more less

All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

Read more less

From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS. Want a guide for this drone, well here you go: Drone Guide Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo! Features Long-range capabilities up to 10KM (FCC) Newest GOKU MINI GPS V3 for Explorer O3 GPS search up to 30 satellites Plug&Play plug O3 Air unit. Hence there is no need to solder 4K/60fps recording for high-quality footage Latest GOKU MINI GPS V3 for greater accuracy Compact and lightweight design, weighing less than 250g even with the battery Long flight time of up to 30 minutes User-friendly controls for easy operation DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.   Specifications FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC Frame: Explorer LR 4 03 (Different from OG Explorer LR frame) Model: Explorer LR 4 HD DJI 03 Propellers: Gemfan 4024 2-Blade Motors: NIN 1404 V2 2750Kv Antenna: DJI 03 antenna VTX: DJI 03 Air Unit Wheelbase: 168mm Camera: DJI 03 Brand: FLYWOO Weight: 168.4g GOKU GN F405 Pro Mini 40A 20x20 Stack GOKU Versatile F405 PRO FC Input Voltage: 2-6S Lipo MCU: STM32F405BGA GYRO: ICM42688P UARTS: 1/2/3/4/5/6 I2C: SCL/SDA Barometer: BMP280 BEC: 5V 2A / 10V 2A Blackbox: 16M Input Voltage: 2-6S Firmware: FLYWOOF405PRO Mounting: 20x20mm M3 / 30x30mm M4 ESC Soft: Dshot300/600 ESC Telemetry: Yes LED Controller: BF LED F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes GOKU 406S 8bit 40A ESC Con. Current: 40A Burst Current: 45A Input Voltage: 2-6S Support DShot300/600 Current Sensor: YES BEC Output: NO Size: 42×42×4mm Mounting Hole: 20x20mm ( M3) FPV System VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2) Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels Camera: DJI O3 Air Unit Camera VTX Antenna: DJI O3 Air Unit Antenna Includes 1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS 2x Gemfan 4024-2 Black Propellers (Set of 4) 2x Battery Strap 15x180mm 1x Hardware Set

Read more less

HBZ380001, HobbyZone AeroScout S 2 1.1m RTF Trainer Electric Airplane (1095mm) w/SAFE & DXS Transmitter The HobbyZone AeroScout S 2 1.1m RTF Trainer Electric Airplane makes learning to fly an RC airplane more fun and easier than ever! Made from durable EPO foam, this trainer is very durable and is equipped with SAFE Technolgy to help prevent loss of control. The AeroScout S features Beginner, Intermediate and Experienced flight modes so you can choose the level of stability and control you need at the flip of a switch. The "pusher" power configuration and EPO construction make it more durable than other similar class models. Tricycle landing gear with oversized tires and a steerable nose wheel makes it easy to take off from and land on a wide variety of surfaces. Grab a Spektrum Power-bundle and get right into the air with the HobbyZone AeroScout! Features: The most durable and perfect trainer for first-time pilots and experienced pilots who teach others to fly Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch Includes almost everything needed to fly except for a compatible LiPo battery and charger (sold separately) Spektrum™ DXS controller/transmitter with industry-leading DSMX® 2.4GHz technology for reliable control without interference Specifications Wingspan: 43.11" (1095 mm) Length: 34.25" (870 mm) Weight: 22.5oz (639g) without Battery Power Type: Electric Motor Size: 2306-2250Kv Completion Level: Ready-To-Fly Basic Includes: (1) HobbyZone AeroScout S 2 1.1m with: (1) Spektrum Avian 30A Brushless Smart Lite ESC (installed) (1) Brushless Outrunner Motor (installed) (4) Sub-Micro Servos (installed) (1) Spektrum AR631 Receiver (installed) (1) Spektrum DXS 2.4GHz DSMX® Transmitter (1) Product Manual Needed to Complete (1) 3S 11.1V 1300–2200mAh LiPo battery with EC3 or IC3 connector (1) Compatible LiPo Charger This product was added to our catalog on January 2, 2022

Read more less

RGR6000, Volitar RTF Micro Helicopter with Stability System Looks Like a Helicopter, Flys Like a Drone! Volitation is defined as the act of flying and the new Rage RC Volitar takes the ease of flying a micro heli to a whole new level. The Volitar is equipped with all the features that make RC drones easy to fly; like 6-axis flight control, auto take-off and land, altitude hold, and dual flight modes, and brings them to a micro heli. Along with being easy to fly, the Volitar is also built to be incredibly durable, partially due to the nylon reinforced carbon fiber tail boom, and 2-gram digital servos provide precision control. Better yet, this micro heli is capable of flight times of up to 15 minutes with the duration-optimized design of the rotor blades. The Volitar is an RTF (Ready-To-Fly) aircraft, so it arrives factory-assembled with everything needed to experience the fun of flying a RC heli, like a 2.4GHz 4-channel transmitter, a USB charger for the included flight battery, and even an extra set of rotor blades. The attractive canopy even comes pre-painted with decals applied and the rotor blades are already painted in matching colors. All you need to add is four AA batteries for the transmitter and you'll be experiencing the ease and fun of flying this new micro heli shortly after opening the box! Features: One touch auto take-off and landing Up to 15 minutes flight time per charge 2.4GHz 4-Ch radio system provides a flying distance up to 100 yards Altitude hold makes it easy to learn control movements Durable beginner-friendly construction Nylon reinforced carbon fiber tail boom Specifications: Height: 3.15" (80mm) Total length: 10.55" (268mm) Weight (with battery): 1.86oz (52.7g) Battery Pack: 3.7V 1S 300mAh LiPo Main Motor: 8520 Coreless, Tail Motor: 0615 Coreless Charge Time: ~60 minutes This product was added to our catalog on October 10, 2021

Read more less