Products
KYOSHO 1957 Chevy Bel Air Coupe Body Set Fits Fazer Mk.2 Long chassis
1957 Chevy Bel Air Coupe Body Set Fits Fazer Mk.2 Long chassis This product was added to our catalog on January 17, 2024
$79.99
KYOSHO KYO32621G, Mini Z AWD Dodge Challenger SRT Hellcat Redeye Readyset, Destroyer Gray
KYO32621G, Mini Z AWD Dodge Challenger SRT Hellcat Redeye Readyset, Destroyer Gray The chassis is equipped with the VCS front suspension for better road holding and smoother suspension stroke, and drift tires are mounted as standard so it is ready for drifting out of the box. 14 ball bearings are installed to make the power train friction free, resulting in higher top speed, and less motor loads/heat. The RX ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit 2.0 (MZW446 - sold separately) you will quickly become a drifting expert. The set contains 20pcs of red cones. Make a gymkhana course with them and sharpen your drifting skills! Tread: (Front) 64.5mmTread: (Rear) 62.0mmWeight: 193g130 class motorGear Ratio: 2, 4, 6.0, 5.7, 5.3, 5.0, 4.5:1Tire Diameter: (F/R) 25.0mm/25.0mmTire Width: (F/R) 8.5mm/110mmTransmitter: KT-531PTop speed: approx. 17km/hRuntime: approx. 50min.Requires: 8 x AAA BatteriesContents:Almost factory assembled chassis equipped with KT531PCompatible Rx ESC unitPinion Gears (15T, 17T, 19T, 21T)Spur Gears (27T, 29T, 31T)Wheel wrenchFeatures: KT-531P Transmitter (control knobs: steering /throttle trim, steering D/R, light flashing speed) Full ball bearings. (14 pcs) MA-020 based chassis with VCS front suspension 20pcs of 25mm height red cones included. Gyro control volume equipped on the RX unit for optional gyro unit Socket for optional LED unit (MZW429R) equipped on the RX unit. Specifications: Length: 171.0mm Width: 75.0 mm Height: 50.0mm Chassis Type: MA-020 Wheelbase: 98.0mm Item Added to our Inventory on: 09/12/2021
$249.99
KYOSHO KYO32621MG, Mini Z AWD Dodge Challenger SRT Hellcat Redeye Readyset, Sublime Green
KYO32621MG, Mini Z AWD Dodge Challenger SRT Hellcat Redeye Readyset, Sublime Green The chassis is equipped with the VCS front suspension for better road holding and smoother suspension stroke, and drift tires are mounted as standard so it is ready for drifting out of the box. 14 ball bearings are installed to make the power train friction free, resulting in higher top speed, and less motor loads/heat. The RX ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit 2.0 (MZW446 - sold separately) you will quickly become a drifting expert. The set contains 20pcs of red cones. Make a gymkhana course with them and sharpen your drifting skills! Tread: (Front) 64.5mmTread: (Rear) 62.0mmWeight: 193g130 class motorGear Ratio: 2, 4, 6.0, 5.7, 5.3, 5.0, 4.5:1Tire Diameter: (F/R) 25.0mm/25.0mmTire Width: (F/R) 8.5mm/110mmTransmitter: KT-531PTop speed: approx. 17km/hRuntime: approx. 50min.Requires: 8 x AAA BatteriesContents:Almost factory assembled chassis equipped with KT531PCompatible Rx ESC unitPinion Gears (15T, 17T, 19T, 21T)Spur Gears (27T, 29T, 31T)Wheel wrench Features: KT-531P Transmitter (control knobs: steering /throttle trim, steering D/R, light flashing speed) Full ball bearings. (14 pcs) MA-020 based chassis with VCS front suspension 20pcs of 25mm height red cones included. Gyro control volume equipped on the RX unit for optional gyro unit Socket for optional LED unit (MZW429R) equipped on the RX unit. Specifications: Length: 171.0mm Width: 75.0 mm Height: 50.0mm Chassis Type: MA-020 Wheelbase: 98.0mm Item Added to our Inventory on: 09/12/2021
$249.99
KYOSHO KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit
KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit This is the Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit. Built on the foundation of the competition-level Ultima RB5, the Dirt Master features high-quality performance components at a mid-range price. Its rear motor layout provides unbeatable grip and stability over low-traction surfaces like gravel and riverbeds. The nostalgic flair of the Dirt Master's updated body pays homage to the classic buggy design while incorporating modern performance features. And with its racing heritage, this buggy is equally at home on fully-fledged RC racing circuits as it is in the great outdoors.Whether you're a beginner driver looking to step up your off-road game or a seasoned racer seeking some good old-fashioned bashing fun, the Ultima SB Dirt Master is the perfect choice. Get ready to experience the purest form of off-road excitement with the Ultima SB Dirt Master. NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Based on a competition-level racing buggy, this unassembled EP buggy kit delivers high performance at a low price. Rear motor design delivers excellent rear tire grip and superior control. Included front/rear tires and wheels demonstrate stability over various types of road surfaces. Classic style body with ageless smart design is equipped with a rear wing that enhances driving stability. Resin main chassis is easy to assemble and exhibits moderate flex characteristics, and can be equipped with standard RC components. Race-proven double-wishbone front and rear suspension is equipped with precision resin oil shocks. Steering mechanism is equipped with a servo saver function that protects the servo from crash shocks. Full bearing specifications as standard greatly improves drive system efficiency. Compatible with optional parts for the Ultima series and racing springs. Driver Set from 2014 Beetle (KYOSCB003B) can be installed to enhance scale realism. Specifications: Length: 380mm Width: 249mm Height: 140mm Weight: 1,450g Wheelbase: 270mm Tire Size: Front:84×28mm Rear:86.5×42mm Gear Ratio: 8.23:1 Includes: (1) Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit (1) Polycarbonate clear body (1) Wing (1) Window mask set Decals Chassis parts Cross wrench Hex wrench?1.5mm/2.0mm? Grease Tires with Tire Inners Wheels Pinion Gear Needed to Complete: (1) 2 Channel R/C System (1) Servo (1) Compatible ESC (1) 540 Size Motor (1) 7.2V Ni-MH Battery or (1) 7.4V Li-Po Battery (1) Compatible Charger Polycarbonate body paint Silicone oil for Shocks Assembly Tools This product was added to our catalog on May 2, 2023
$199.99
KYOSHO KYO34362, 1/10 2WD Outlaw Rampage Pro Kit, ARR
Embodying the defining mechanics of a real production model trophy truck, the scale 2WD Outlaw Rampage is about 70% pre-assembled in an ARR kit, including the optional upgrade components that mark this machine as a "PRO" version. Features include a spare tire carrying roll cage, long stroke aluminum oil shocks, stabilizers on front and rear with 3 different wire settings, and aluminum skid pads that protect the chassis. With easy control ability and a wider scope for setting adjustments, the true dynamic performance of 2WD truck racing is in your hands. ARR Kit is nearly fully pre-assembled and includes performance-enhancing optional parts as standard. Full ball bearing specifications (20 bearings) ensure smooth movement with minimal drive loss. 3-piece front bumper protects the chassis from hard crash damage. Front double-wishbone suspension with longer sus arms realizes excellent driving stability and traction. Rear suspension is linked to the rigid axle differential to deliver smooth movement and superior traction. Gearbox features 32-pitch counter gear and diff gear. Reinforcement of both gears and large modules realizes increased strength (spur gear is 48-pitch). Lever lock holder allows easy removal of battery. Connector holder allows connector to the radio plate to be removed with one hand. Hex screws are used throughout for easy maintenance. Pre-cut clear scale body recreates 1970-80's trophy truck style. (requires paint) Choose either square or round headlights with the two front grill styles included. Compatible with LED light unit (No. 97054-2: two lights, 97054-4: four lights) for easy installation.
$239.99
KYOSHO KYO34412T1, Fazer Mk2 Mad Van 1/10 4WD Readyset RTR Monster Truck
KYO34412T1, Fazer Mk2 Mad Van 1/10 4WD Readyset RTR Monster Truck Designed in the image of an American full-size van, Kyosho's fun MAD VAN model combines retro body styling with a light and sporty chassis for pure R/C enjoyment. The simple design of the FZ02L-BT chassis uses fewer parts for easy maintenance and delivers strength and rigidity through front & rear stiffeners with reinforced ribbing and optimized material formulation on critical parts. In addition, the near symmetrical design and optimal front-rear suspension balance works in combination with the power source to produce excellent control and maneuverability for this type of model. Front and rear differentials, oil shocks and full ball bearing specifications provide performance to compliment its high durability and impact-resistance. Soft compound, wide large-diameter tires with inner foam feature rounded shoulders to produce secure grip, not only off-road, but on sealed surfaces too, so this van can be enjoyed just about anywhere! As the MAD VAN is fully pre-assembled Readyset, only 4 x AA batteries for the transmitter, a battery for the chassis, and a battery charger are required for the fun to begin. Whether going off-road or on-road, the MAD VAN produces dynamic performance to be enjoyed with its own unique style. Required: Battery for Chassis Charger 4 x AA size batteries for transmitter Features: Enjoy the direct acceleration of the shaft-driven full-time 4WD (FZ02L-BT) buggy chassis. Factory-assembled Readyset only requires 4 x AA size batteries for the transmitter, a battery for the chassis and battery charger to run. Includes 2.4GHz Syncro KT-231P+ transmitter with throttle trim, steering trim, throttle EPA, and steering dual rate settings. Two-bevel grease-filled gear differentials are equipped as standard on the front and rear. Large size dog bone & cup joints contribute to improved durability and reliability. Strap battery mount allows various battery types to be installed. Specifications: Length 383mm Width 323mm Height 200mm Wheelbase 273mm Tread (F/R) 250mm/250mm Motor 550 size G14L
$249.99
KYOSHO KYO34412T2, Fazer Mk2 Mad Van 1/10 4WD Readyset Monster Truck
Designed in the image of an American full-size van, Kyosho's fun MAD VAN model combines retro body styling with a light and sporty chassis for pure R/C enjoyment. The simple design of the FZ02L-BT chassis uses fewer parts for easy maintenance and delivers strength and rigidity through front & rear stiffeners with reinforced ribbing and optimized material formulation on critical parts. In addition, the near symmetrical design and optimal front-rear suspension balance works in combination with the power source to produce excellent control and maneuverability for this type of model. Front and rear differentials, oil shocks and full ball bearing specifications provide performance to compliment its high durability and impact-resistance. Soft compound, wide large-diameter tires with inner foam feature rounded shoulders to produce secure grip, not only off-road, but on sealed surfaces too, so this van can be enjoyed just about anywhere! As the MAD VAN is fully pre-assembled Readyset, only 4 x AA batteries for the transmitter, a battery for the chassis, and a battery charger are required for the fun to begin. Whether going off-road or on-road, the MAD VAN produces dynamic performance to be enjoyed with its own unique style. Required:Battery for ChassisCharger4 x AA size batteries for transmitter Features: Enjoy the direct acceleration of the shaft-driven full-time 4WD (FZ02L-BT) buggy chassis. Factory-assembled Readyset only requires 4 x AA size batteries for the transmitter, a battery for the chassis and battery charger to run. Includes 2.4GHz Syncro KT-231P+ transmitter with throttle trim, steering trim, throttle EPA, and steering dual rate settings. Two-bevel grease-filled gear differentials are equipped as standard on the front and rear. Large size dog bone & cup joints contribute to improved durability and reliability. Strap battery mount allows various battery types to be installed. Specifications: Length: 383mm Width: 323mm Height: 200mm Wheelbase: 273mm Tread (F/R) 250mm/250mm Motor: 550 size G14L
$289.99
KYOSHO KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio
KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio The Kyosho 2015 Dodge SRT Challenger Hellcat Fazer Mk2 ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through updated materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter for operation. Features: Updated design shaft drive full-time 4WD touring chassis (FZ02L). Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Comes with the powerful 550 size 14T brushed motor(G14L). The long can with Steel ring and internal cooling fan provides efficient torque and high speeds. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large sized dog bones and cup joints provide excellent reliability and durability. Strap battery mounting allows for various battery types to be used. Full ball bearings equipped throughout the drive system. Features KS202W waterproof steering servo. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Performance can be further enhanced by installing various optional parts. Specifications: Length: 486mm Width: 200mm Wheelbase: 274mm Tread (F/R): F:174mm / R:174mm Tires (F/R): F:66×25mm / R:66×25mm Gear Ratio: 6.5:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: (4) "AA" Batteries (for transmitter) 2S LiPo Battery w/T-Style Connector (or, 6 or 7-Cell NiMH Battery w/T-Style) Compatible Battery Charger NOTE: Model shown equipped with battery pack for illustrative purposes only and is not included. This product was added to our catalog on February 11, 2021
$239.99
KYOSHO KYO34415T2, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Blue) w/Syncro KT-231P Radio
KYO34415T2, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Blue) w/Syncro KT-231P Radio The Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet was carefully replicated and styled after the full size Challenger. The pure enjoyment of driving an incredibly realistic body on the FAZER Mk.2 series chassis can’t be beaten. Kyosho took the Fazer touring car chassis and gave it a full makeover that improves performance with a simplified design and fewer parts to make maintenance easier and reduce weight. The core strength and rigidity has been increased with updated materials, ribbing and stiffeners on front and rear. A symmetrical chassis design creates excellent front-rear balance through the suspension with responsive control, regardless of power source.Featuring front & rear gear differentials, oil shocks and full ball bearings, combined with the high durability and impact resistance drivers can unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter for operation.Features: Reduced number and variety of screws to simplify maintenance Two offset brake disc wheel hubs with dummy calipers (for visual styling) are included for 190mm and 200mm body compatibility Updated rebuildable oil filled shocks mark a step up from previous models Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control Low profile tires with 7 spoke mesh wheels to match the unique American muscle car form of the Dodge Challenger Standard pinion and spur gear setting is 32T and 68T Pinion gear settings can be used from 29T – 37T (Sold separately) to produce a wide range of gear ratio settings Specifications: Length: 486mm Width: 190mm Wheelbase: 274mm Tread (F/R): F:174mm/R:174mm Tires (F/R): F:66×25mm/R:66×25mm Gear Ratio: 6.5:1 Weight: 1650g (approx.) Radio System: Syncro KT-231P+ Motor: G14L Included: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Setting change parts Needed to Complete: (4) "AA" Batteries (for transmitter) 2S LiPo Battery w/T-Style Connector (or, 6 or 7-Cell NiMH Battery w/T-Style) Compatible Battery Charger This product was added to our catalog on July 26, 2021
$239.99
KYOSHO KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR
KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR Features1.) New Fazer Mk2 Chassis!! New simple and efficient shaft driven 4WD design with improved performance performance. Light weight and low C of G bathtub style design made of durable glass reinforced 66 nylon material.2.) Licensed 1970 Chevy Chevelle SS 454 LS 6 BodyBody!! Molde d headlight / grill with light buckets(LED compatible).3.) New complex true to scale 2pcs body with injecinjection molded parts like front and rear grills, side mirrors, fuel caps, etc etc.4.) New scale vintage wheel design with brake rotor parts!! Also includes 0mm offset rotor hubs(Allowing 190mm width)!! New chrome plated wheels for true scale.5.) New high grip old school radial tires!!6.) New steering and double wishbone suspe nsion design for superior handling and damping characteristics. Plastic made of durable glass reinforced 66 nylon material. Adjustable caster angle(3 settings settings).7.) 12mm big bore shocks.8.) Reliable shaft d driven 4WD drive train design with slipper clutch.9.) 2 bevel gear type diff system on front and rear.10.) Easy gear mesh system(22T 30T)30T). Stock pinion is 22T.11.) New p owerful Kyosho original 550 size 14T brushed motor12.) N ew Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S LiPo compatible.13.) New high response high torque KS 4081 04 WP water proof steering servo14.) Utilizes a longer wheelbase chassis for more stability and scale appearance.15.) New shock design and soft shock spring setup16.) New RX box to protect from dust and debri s17.) New Sy ncro 2.4GHz KT2 31P Radio system18.) All hex hardware19.) Full ball racedTECHNICAL DATALength: 484 mm, Width: 210 mm, Wheelbase: 274 mm, Tread: 167 mm (F) / 167 mm(R) Tire Width : 277 mm, Tire Diameter: 64 mm Weight Approx 165 0g Gear Ratio: 6.54:1 Top Speed : 40km / h Run Time : 15 minREADYSET CONTENTSFactory assembled chassis with graphics Servo (KS 4081 04 WP ) SYNCRO KT 231P transmitter and KR 331 Receiver unit Kyosho KA060 91W ESC and 1 4T motorREQUIRED FOR OPERATION4 x AA battery for Transmitter 7.2V 8.4V NiMh or 7.4 LiPo battery and charger
$239.99
KYOSHO KYO34417T1, Fazer Mk2 1970 Dodge Charger RTR, Hemi Orange
KYO34417T1, Fazer Mk2 1970 Dodge Charger RTR, Hemi Orange
$249.99
KYOSHO KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio
KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio The Kyosho 1970 Dodge Charger Fazer Mk2 ReadySet was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Fully assembled, painted and ready to run Updated design shaft drive full-time 4WD touring chassis (FZ02L) Ultra scale officially licensed body replicates the fine details of the real 1970 Charger Equipped with 2-bevel grease-filled gear diffs on front and rear Large sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 507mm Width: 210mm Height: 128mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on May 25, 2023
$244.99
KYOSHO KYO34418T1, 1/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Le Mans Blue)
KYO34418T11/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Le Mans Blue) New Fazer FZ02 Mk2 Chassis! Normal chassis is shorter wheel-base compared to the FZ02L (Dodge Challenger) chassis. New simple and efficient shaft driven 4WD design with improved performance. Light weight and low CG bathtub style design is made of durable glass reinforced nylon material.For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and AA batteries for the transmitter.Required for operation:4x AA batteries for transmitterBattery and charger for chassisTools Features: "Ultra Scale Body" replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02). Factory-assembled Readyset package only requires 4x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large size dog bones and cup joints realize superior reliability and durability. Syncro 2.4GHz KT-231P+ Radio system Specifications: Length: 460mm Width: 195mm (Body 210mm) Wheelbase: 260mm Tread (F/R) F:184mm / R:184mm Gear Ratio: 6.54:1 Weight: 1650g (approx.)
$229.99
KYOSHO KYO34418T2, Kyosho Fazer Mk2 FZ02 1969 Chevy Camaro Z/28 ReadySet (Frost Green) w/Syncro KT-231P 2.4GHz Radio
KYO34418T2, Kyosho Fazer Mk2 FZ02 1969 Chevy Camaro Z/28 ReadySet (Frost Green) w/Syncro KT-231P 2.4GHz Radio This product was added to our catalog on November 22, 2021
$244.99
KYOSHO KYO34419T1, Kyosho Fazer Mk2 FZ02L 1969 Chevy El Camino ReadySet w/Syncro KT-231P+
KYO34419T1, Kyosho Fazer Mk2 FZ02L 1969 Chevy El Camino ReadySet w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02L 1969 Chevy Chevy El Camino ReadySet takes the standard Fazer touring car chassis and combines it with the latest “Ultra Scale Body” to more accurately replicate the fine details of the full size car. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. New design shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large size dog bones and cup joints realize superior reliability and durability. Belt mounting battery compartment allows various battery types to be used. Full ball bearings that reduce drive loss equipped throughout the drive system. Features KS202W steering servo. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Performance can be further enhanced by installing various optional parts. Specifications: Length: 507mm Width: 195mm (Body 210mm) Wheelbase: 274mm Tread (F/R): F:167mm / R:167mm Tires (F/R): F:64 X 27.7mm / R:64 X 27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: (4) AA batteries for transmitter Battery and charger Tools This product was added to our catalog on March 8, 2022
$239.99
KYOSHO KYO34419T2, Fazer Mk2 FZ02 1969 Chevy El Camino SS 396, Type 2 Cortez Silver, 1/10 Electric 4WD
For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: New Fazer Mk2 Chassis FZ02 with a longer wheelbase to pursue scale dimensions. New simple and efficient shaft driven 4WD design with improved performance. Light weight and low C of G bathtub style design made of durable glass reinforced 66 nylon material Licensed 1969 Chevy El Camino body! Plastic chrome plated grill and headlights! Tinted clear windows!! LED ready with light buckets! ULTRA SCALE badge!! New scale wheel design with brake rotor parts!! Also includes 0mm offset rotor hubs(Allowing 190mm width)! Vintage style high grip tires and chrome plated rims!! New steering and double wishbone suspension design for superior handling and damping characteristics. Plastic made of durable glass reinforced 66 nylon material. Adjustable caster angle(3 settings). 12mm big bore shocks. Reliable shaft driven 4WD drive train design with slipper clutch. 2 bevel gear type diff system on front and rear. New powerful Kyosho original 550 size 14T brushed motor. New Kyosho Speed House KA060-91W water-proof brushed 60A ESC with Super plug connectors. 2S Li-Po compatible. New high response high torque KS4081-04WP water proof steering servo New Syncro 2.4GHz KT231P+ Radio system
$245.99
KYOSHO KYO34423, Kyosho EP Fazer Mk2 Alpine GT4 ReadySet 1/10 Electric Touring Car w/2.4GHz Radio
KYO34423, Kyosho EP Fazer Mk2 Alpine GT4 ReadySet 1/10 Electric Touring Car w/2.4GHz Radio For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 460mm Width: 200mm Wheelbase: 260mm Tread (F/R): F:184mm / R:184mm Tires (F/R): F:66×25mm / R:66×25mm Gear Ratio: 6.5:1 Weight: 1620g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: Battery for Chassis w/T-Plug Connector Charger (4) AA size batteries for transmitter Tools This product was added to our catalog on January 7, 2022
$289.99
KYOSHO KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio
KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio The Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car was developed for the pure enjoyment of R/C car driving. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: "Ultra Scale Body" replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Large size dog bones and cup joints realize superior reliability and durability. Full ball bearings that reduce drive loss equipped throughout the drive system. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Specifications: Length: 464mm Width: 200mm Wheelbase: 260mm Tread (F/R): F:174mm / R:174mm Tires (F/R): F:66×25mm / R:66×25mm Gear Ratio: 6.5:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: (4) AA batteries for transmitter Battery and charger for chassis Tools This product was added to our catalog on September 8, 2021
$259.99
KYOSHO KYO34424T2, Kyosho Fazer Mk2 FZ02 2020 Mercedes AMG GT3 "50 Year Legend of Spa" RTR w/Syncro KT-231P+ 2.4GHz Radio
KYO34424T2, Kyosho Fazer Mk2 FZ02 2020 Mercedes AMG GT3 "50 Year Legend of Spa" RTR w/Syncro KT-231P+ 2.4GHz Radio Kyosho Fazer Mk2 AMG GT3 50 Year Legend RTR The 2020 Mercedes AMG GT3 "50 Years Legend of Spa" pays homage to the illustrious history of the Spa 24 Hours endurance race. With its unique livery and exclusive design, it celebrates five decades of racing excellence at one of the world's most iconic circuits. This limited edition GT3 variant embodies the spirit of endurance racing, delivering top-tier performance and a timeless connection to the storied legacy of Spa. Kyosho has even recreated this iconic car as a 1/10 scale Fazer Mk2, allowing enthusiasts to own a piece of racing history and experience its allure on a smaller scale. The powertrain features a slipper clutch channeling all the electric ponies to both front and rear gear differentials. Equipped with precision ball bearings, this chassis excels in both durability and impact resistance, enabling drivers to confidently explore its limits. Brake disc wheel hubs, offering two different offsets (0mm and +5mm), provide versatility for accommodating 190mm and 200mm width body styles. Furthermore, the option to replace specific parts (available separately) allows for wheelbase adjustment up to 270mm, ensuring compatibility with a range of 1/10 scale body styles. Features: Officially licensed 2020 Mercedes Benz AMG GT3 GT3 inspired race wheels Fully assembled, painted, and ready to run Updated to hex style hardware Updated powerful Kyosho original 550 size 14T brushed motor motor Updated Kyosho Speed House KA060 KA060-91W water-proof brushed 60A ESC Updated shock bodies and piston with soft spring setup Updated steering and double wishbone suspension design for superior handling and damping characteristics Updated Syncro 2.4GHz KT2 31P31P+ Radio system Shaft driven full-time 4WD touring chassis Equipped with 2-bevel grease-filled gear differentials on front and rear Large-sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system High response KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 18.26in (464mm) Width: 7.87in (200mm) Height: 4.96in (126mm) Wheelbase: 10.23in (260mm) Approximate Weight: 58.20oz (1650g) Tire Tread: Front: 6.85in (174mm) Rear: 6.85in (174mm) Tires Width: Front: 2.59x0.98in (66×25mm) Rear: 2.59x0.98in (66×25mm) Gear Ratio: 6.5:1 Motor: G14L Includes: (1) Fazer Mk2 FZ02 2020 Mercedes AMG GT3 (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on February 13, 2024
$265.99
KYOSHO KYO34425T1, Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet (Silver) w/Syncro KT-231P+
KYO34425T1, Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet (Silver) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on October 23, 2022
$269.99
KYOSHO KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio
KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio The Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet was created to enjoy R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring a slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter and battery with charger for the chassis Full ball bearings that reduce drive loss are equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory-assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for the transmitter 7.2-7.4V battery w/T-Style plug Charger for battery Tools This product was added to our catalog on October 27, 2022
$269.99
KYOSHO KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White)
KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet was created to enjoy R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter and battery with charger for the chassis Full ball bearings that reduce drive loss are equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 462mm Width: 200mm Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory-assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for the transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on February 21, 2023
$289.99
KYOSHO KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+
KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 500mm Width: 195mm(Body width:210mm) Height: 136mm Wheelbase: 274mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof electronic speed controller (forward/brake/reverse) +5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on March 24, 2022
$269.99
KYOSHO KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+
KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 500mm Width: 195mm(Body width:210mm) Height: 136mm Wheelbase: 274mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof electronic speed controller (forward/brake/reverse) +5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on October 21, 2022
$269.99
KYOSHO KYO34432T1, Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet (Inferno) w/Syncro KT-231P+
KYO34432T1, Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet (Inferno) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 2021 Toyota Tundra Wide Body ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a higher level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: Shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 452mm Width: 192mm Height: 135mm Wheelbase: 274mm Tread (F/R): F:174mm/R:174mm Tires (F/R): F:66×25mm/R:66x25mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on November 17, 2022
$249.99
KYOSHO KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio
KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio This is the Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet. Using the iconic 1957 Chevy Bel Air Coupe as an inspiration, Kyosho has expertly recreated this classic car with incredible detail. The scale polycarbonate body incorporates the unmistakable Bel Air grille, lights, window trim and who could forget the large tail fins! The combination of this beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring front and rear gear differentials, oil filled shocks, full ball bearings and a durable and impact resistant chassis allows drivers to unleash the full potential of the Fazer platform. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some optional parts (not included). This gives the Fazer platform added compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: "Ultra Scale Body" replicates the fine details of the actual body of the car Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints offer superior reliability and durability Full ball bearings reduce friction and increase efficiency Includes KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Specifications: Length: 493mm Width: 211mm (Body width, excluding mirrors) Height: 146mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed To Complete: (4) AA Batteries for transmitter Battery and charger for chassis Tools This product was added to our catalog on January 31, 2023
$289.99
KYOSHO KYO34434T1, Kyosho EP Fazer Mk2 FZ02L 1965 Buick ReadySet Riviera (Regal Black) w/Syncro KT-231P Radio
KYO34434T1, Kyosho EP Fazer Mk2 FZ02L 1965 Buick ReadySet Riviera (Regal Black) w/Syncro KT-231P Radio Kyosho Fazer Mk2 1/10 Touring Car (1965 Buick Riviera Body) The Kyosho Fazer Mk2 FZ02L 1965 Buick Riviera was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Fully assembled, painted and ready to run Updated design shaft drive full-time 4WD touring chassis (FZ02L) Ultra scale officially licensed body replicates the fine details of the real 1965 Riviera Equipped with 2-bevel grease-filled gear diffs on front and rear Large sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 500mm Width: 211mm Height: 130mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) EP Fazer Mk2 FZ02L 1965 Buick Riviera 1/10 Touring Car ReadySet (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on July 18, 2023
$245.99
KYOSHO KYO34435T1, 1966 Chevy C10 Fleetside Pickup 1/10 Scale Electric Powered 4WD Fazer Mk2, FZ02 Series
KYO34435T1, 1966 Chevy C10 Fleetside Pickup 1/10 Scale Electric Powered 4WD Fazer Mk2, FZ02 Series Kyosho has faithfully recreated one of the most loved cars of all time! the iconic 1966 Chevy C10 Fleetside pickup truck! This legendary platform has been a favorite for many classic pick up trucks fans and admirers around the world, This officially licensed body by GM captures all the fine details of the C10 Fleetside, sparing nothing for imagination! The Kyosho Fazer Mk2 FZ02L 1966 Chevy C10 Fleetside was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the Fazer series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Officially licensed by GM Chevrolet Fully assembled, painted and ready to run Super scale detailed body that replicates the iconic 60’s American pickup truck Vintage Touring Car (VTC) tires and Rostyle type wheels with knockoffs to match vintage car style Front and rear light buckets for optional LED lights Updated design shaft drive full-time 4WD touring chassis (FZ02L) Equipped with 2-bevel grease-filled gear differentials on front and rear Large sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Smooth oil filled shocks Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 500mm Width: 211mm Height: 130mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) EP Fazer Mk2 FZ02L 1/10 Touring Car ReadySet (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on August 8, 2023
$245.99
KYOSHO KYO34436T1, Kyosho Fazer MK2 FZ02 1971 Mercedes Benz 300SEL RTR w/Syncro KT-231P+ 2.4GHz Radio
KYO34436T1, Kyosho Fazer MK2 FZ02 1971 Mercedes Benz 300SEL RTR w/Syncro KT-231P+ 2.4GHz Radio Fazer MK2 FZ02 1971 Mercedes Benz 300SEL RTR The 1971 Mercedes Benz 300SEL stands as an enduring emblem of opulence and refinement. With its captivating design, characterized by the prestigious grille and graceful contours, it encapsulates an era of timeless elegance. Beneath the hood, it marries potent performance with meticulous engineering, cementing its status as a paragon of automotive luxury and artistry. Kyosho has beautifully recreated this Elegant masterpiece and placed it on the powerful Fazer MK2 FZ02 chassis giving everyone a chance to appreciate 70s luxury. The powertrain features a slipper clutch channeling all the electric ponies to both front and rear gear differentials. Equipped with precision ball bearings, this chassis excels in both durability and impact resistance, enabling drivers to confidently explore its limits. Brake disc wheel hubs, offering two different offsets (0mm and +5mm), provide versatility for accommodating 190mm and 200mm width body styles. Furthermore, the option to replace specific parts (available separately) allows for wheelbase adjustment up to 270mm, ensuring compatibility with a range of 1/10 scale body styles. Features: Officially licensed 2020 Mercedes Benz AMG GT3 Vintage chrome wheel design Fully assembled, painted, and ready to run Updated to hex style hardware Updated powerful Kyosho original 550 size 14T brushed motor motor Updated Kyosho Speed House KA060 KA060-91W water-proof brushed 60A ESC Updated shock bodies and piston with soft spring setup Updated steering and double wishbone suspension design for superior handling and damping characteristics Updated Syncro 2.4GHz KT2 31P31P+ Radio system Shaft driven full-time 4WD touring chassis Equipped with 2-bevel grease-filled gear differentials on front and rear Large-sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system High response KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 19.52in (496mm) Width: 8.11in (206mm) Height: 5.59in (142mm) Wheelbase: 10.78in (274mm) Approximate Weight: 58.20oz (1650g) Tire Tread: Front: 6.85in (174mm) Rear: 6.85in (174mm) Tires Width: Front: 2.59x0.98in (64×27.7mm) Rear: 2.59x0.98in (64×27.7mm) Gear Ratio: 6.54:1 Motor: G14L Includes: (1) Fazer MK2 FZ02 1971 Mercedes Benz 300SEL (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on February 13, 2024
$269.99
KYOSHO KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+
KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+ Toyota Supra A80 with Kyosho original graphics. Next generation chassis with improved durability, performance, maintenance, and friendly features. Features: Fazer Mk2 Chassis FZ02. Shorter wheel wheel-base compared to the FZ02L (Dodge Challenger) chassis. Simple and efficient shaft driven 4WD design with improved performance. Light weight and low CG bathtub style design made of durable glass reinforced 66 nylon material. Licensed Toyota Supra A80 Body New wheel design with brake rotor parts!. Also includes 0mm offset rotor hubs (Allowing 190mm width) Drift Tires New steering and double wishbone suspension design for superior handling and damping characteristics. Adjustable caster angle(3 settings) 12mm big bore shock Reliable shaft driven 4WD drivetrain design with slipper clutch 2 bevel gear type diff system on front and rear Easy gear mesh system Powerful Kyosho original 550 size 14T brushed motor Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S Li Po compatible. High response, high torque KS 4081 04 WP water proof steering servo New shock design and soft shock spring setup New RX box to protect from dust and debris Syncro 2.4GHz KT2 31P Radio system All hex hardware Full ball bearings Specifications: Length: 455mm Width: (Body width) 200mm (210mm) Height: 120mm Wheelbase: 260mm Tread Front/Rear: 174mm/174mm Tires Front/Rear: 64×24.2mm/64×24.2mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Transmitter: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: Battery for Chassis w/T-Plug Connector Charger (4) AA size batteries for transmitter This product was added to our catalog on October 19, 2021
$219.99
KYOSHO KYO34472T1, Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R Drift ReadySet
KYO34472T1, Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R Drift ReadySet w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm (approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on July 19, 2022
$269.99
KYOSHO KYO34473T1, Kyosho EP Fazer Mk2 FZ02-D 2006 Subaru Impreza ReadySet w/Syncro KT-231P Radio
KYO34473T1, Kyosho EP Fazer Mk2 FZ02-D 2006 Subaru Impreza ReadySet w/Syncro KT-231P Radio Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Overview: The Kyosho Fazer Mk2 FZ02L 2006 Subaru Impreza was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the Fazer series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allow drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Officially licensed by Subaru to Kyosho Based on the GDB type Impreza nicknamed Hawkeye. Pre-painted finished body with Kyosho's original coloring with beautiful gradation and flashy colors that are conscious of the drift scene. On the side of the body, the number 60 is placed to commemorate the 60th anniversary of Kyosho. Factory-assembled Readyset package only requires (AA) alkaline batteries for the transmitter and battery with charger for the chassis! In the initial setting, the vehicle height is raised so that troubles due to gaps can be avoided. Full ball bearings that reduce drive loss equipped throughout the drive system. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Shaft drive full-time 4WD touring chassis. Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale. Uses Hex head button or countersunk screws within each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools. Motor mount with holes to accommodate 29T to 37T pinion gear. Performance can be further enhanced by installing various optional parts. Chassis realizes a low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes the torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without an upper deck. Reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on the front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Resin drift tires that have both control performance and slide performance are equipped with 5-spoke racing wheels with deep rims that are conscious of the drift scene. Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 456mm Width: 205mm Height: 140mm Wheelbase: 260mm Tread (F/R): 174mm Tires (F/R): 63.2×24.2mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) Kyosho Fazer Mk2 FZ02-D 2006 Subaru Impreza Ready Set Electric Touring Car (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner (1) Drift wheels set Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on December 30, 2023
$269.99
KYOSHO KYO34481T1, Kyosho Fazer Mk2 FZ02 2002 Subaru Impreza STI WRC 1/10 Electric RTR w/Syncro KT-231P+ 2.4GHz Radio
KYO34481T1, Kyosho Fazer Mk2 FZ02 2002 Subaru Impreza STI WRC 1/10 Electric RTR w/Syncro KT-231P+ 2.4GHz Radio Kyosho Fazer Mk2 Subaru Impreza STI WRC 1/10 RTR In the 2002 WRC season, Subaru achieved remarkable success, securing the Manufacturers' Championship title for the third consecutive year. The Subaru World Rally Team's efforts were particularly notable, with drivers like Petter Solberg and Tommi Mäkinen consistently delivering strong performances. Their exceptional driving skills, combined with the legendary Subaru Impreza WRC car's reliability and speed, propelled Subaru to the forefront of the rallying world during the 2002 season. Kyosho recognized the passion and admiration for this legendary rally car, inspiring them to create a 1/10 scale RC version. By meticulously reproducing the Subaru Impreza STI WRC, Kyosho allowed enthusiasts to relive the excitement of the 2002 WRC season, experiencing the same winning spirit, precision engineering, and thrilling performance in their own RC adventures. The powertrain features a slipper clutch channeling all the electric ponies to both front and rear gear differentials. Equipped with precision ball bearings, this chassis excels in both durability and impact resistance, enabling drivers to confidently explore its limits. Brake disc wheel hubs, offering two different offsets (0mm and +5mm), provide versatility for accommodating 190mm and 200mm width body styles. Furthermore, the option to replace specific parts (available separately) allows for wheelbase adjustment up to 270mm, ensuring compatibility with a range of 1/10 scale body styles. Note: Driving this car in public is sure to elicit enthusiastic reactions, with passersby often exclaiming, "Is that a Subuwu?"—a testament to the vehicle's unmistakable charm and undeniable attention-grabbing presence.Features: Officially licensed 2002 Bug Eye Subaru Impreza WRC Body 15 Spoke Bronze Rally inspired wheels Fully assembled, painted, and ready to run Updated to hex style hardware Updated front bumper with skid angles Updated PC inner body for protection against dust and debris Updated powerful Kyosho original 550 size 14T brushed motor motor Updated Kyosho Speed House KA060 KA060-91W water-proof brushed 60A ESC Updated front and rear shock towers increase suspension travel Updated shock bodies and piston with soft spring setup Updated steering tie-rods and revised hub arms to minimize bump steer and increase performance on off-road terrain Updated Syncro 2.4GHz KT2 31P31P+ Radio system Front and rear light buckets for optional LED lights Shaft driven full-time 4WD touring chassis Equipped with 2-bevel grease-filled gear differentials on front and rear Large-sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system High response KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 18.26in (464mm) Width: 7.87in (200mm) Height: 4.96in (126mm) Wheelbase: 10.23in (260mm) Approximate Weight: 58.20oz (1650g) Tire Tread: Front: 6.85in (174mm) Rear: 6.57in (167mm) Tires Width: Front: 2.59x0.98in (66×25mm) Rear: 2.59x0.98in (66×25mm) Gear Ratio: 6.54:1 Motor: G14L Includes: (1) EP Fazer Mk2 FZ02 1/10 2002 Subaru Impreza WRC (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on February 13, 2024
$279.99
KYOSHO KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE
KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE Enhanced scale features of the American street van styled FAZER Mk2 MAD VAN are combined with a 50% increase in maximum speed due to the change to brushless motor power in this 1/10 scale VE model. In place of the conventional G14L brushed motor, this model combines the powerful TORX 10E brushless motor with BRAINZ 10 speed controller to lift the maximum speed from 40km/h to 60km/h. To manage the extra power and RPM, gears have been reinforced and reduction ratio optimized on the FZ02L-BT chassis base, which now incorporates the previously optional aluminum HD center shaft L. In addition to chassis improvements, the body styling has also received a 3-D enhancement with molded resin grille and lights replacing decals, and a roof guard has been added to protect the body from rollovers. With elevated performance and appearance, you can experience the exhilaration of running wild at high speed with the MAD VAN VE. Long-type upper and lower suspension arms equipped with oil shocks for front and rear provide a sufficient stroke and secure damping force. Ball-connected left-right interchangeable steering knuckles realize smooth operation and crash resistance. Aluminum HD center shaft (No. FAW210) is standard equipment to support the power of brushless motor. The TORX 10E brushless motor generates enough power for gentle wheelies with the big body and tires. Sealed motor case prevents dirt and dust from getting into the motor and gearbox. Includes BRAINZ 10 speed controller equipped with cooling fan, for brushless motors. Able to be programmed for specific purposes. Gearbox incorporates high-strength sintered metal gears. In addition to new material, the final gear ratio has been changed to low gear to fully utilize the power of the brushless motor. The machined steel pinion gear has also been strengthened. Large diameter tires produce high grip on any road surface. The kit comes with pre-glued wheels so you can hit the ground running. To match the new-look chassis, wheels have been changed to white and match nicely with the body. VE model features a wheelie bar to prevent flipping over when doing wheelies. With the power of the brushless motor, the dynamic acceleration lifts the front wheels and the chassis runs on its rear wheels (wheelie). Features: Pre-assembled chassis is sold as a Readyset including installed R/C system and pistol-grip transmitter. Battery for the chassis and charger are sold separately Includes Syncro KT-231P+ pistol-grip transmitter with various custom setting adjustments Robust construction of the full-time 4WD FZ02L-BT chassis is tough enough to handle the hard punishment of rough-road bashing Full ball bearing specifications improve drive efficiency and durability Includes American-style van body that has been enhanced with an even greater level of scale detail. Equipped with Front and Rear light buckets compatible with optional No. 97054-4CR LED Light unit which is sold separately.By installing the LED light unit, improves scale realism for body shell. Specifications: Length 460mm Width 323mm Height 197mm Wheelbase 274mm Gear Ratio 11.803:1 Tires (F/R) F:110x70mm/R:110x70mm This product was added to our catalog on June 11, 2022
$279.99
KYOSHO KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio
KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio Kyosho Fazer Mk2 FZ02L VE Brushless Touring Car with Supercharged 1970 Dodge Charger Body The Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet is a brushless chassis that has a classic muscle car look. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. This Charger body features a scale supercharger and molded light buckets for optional LED's (not included). To complete the look, Kyosho included functional flip headlight covers that can actuate by removing a screw from the headlight assembly. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. The Ready Set package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 507mm Width: 195mm Body Width: 210mm Height: 128mm Chassis Height: 15mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1680g Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on May 9, 2022
$329.99
KYOSHO KYO34493T1, Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+
Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 VE 1969 Camaro Z/28 RS Supercharged ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 461mm Width: 210mm Height: 138mm Wheelbase: 260mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: TORX10E Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery Tools This product was added to our catalog on November 30, 2022
$369.99
KYOSHO KYO34494T1, Fazer Mk2 VE 1970 Chevelle Supercharged Dark Blue
KYO34494T1, Fazer Mk2 VE 1970 Chevelle Supercharged Dark Blue This V8 powered American muscle car from the 1970s is recreated by using Kyosho's original supercharger and mufflers on both sides. The elegant body lines, rugged engine head and sparkling muffler create a perfect match. The motor has been upgraded to the powerful TORX10E brushless motor, increasing the maximum speed to approximately 65km/h (40mp/h). The speed controller has also been upgraded with the new BRAINZ 10 V2. To handle the increased power of the motor, the pinion gear has been sintered (hardened) and the aluminum HD center shaft is factory installed. Includes: RTR - Factory-assembled chassis with R/C unit installed Painted/Decaled/Assembled body Synchro KT-231P+ transmitter Optional Light Buckets (Requires installation, led set sold separately) Hex wrench Spanner Required to Complete: 4 AA batteries for transmitter Compatible Ni-MH (6-9s) or LiPo (2-3s) battery Charger for chosen battery Features: Body has supercharger and mufflers preinstalled Sintered (hardened) pinion gear Aluminum Center Shaft LCG Chassis w/ integrated gearbox Sealed Motor Case TORX10E/BRAINZ 10 V2 Motor/ESC Combo Supercharger can be manually opened and closed Specifications: 4WD - Shaft Driven Water-Resistant Electronics This item was added to our catalog on April 5, 2024
$399.99
KYOSHO KYO34701, Kyosho Mad Wagon VE 1/10 Scale ReadySet Electric 4WD Truck w/2.4GHz Radio
KYO34701, Kyosho Mad Wagon VE 1/10 Scale ReadySet Electric 4WD Truck w/2.4GHz Radio Kyosho Mad Wagon VE 1/10 Scale ReadySet Electric 4WD Truck. This next generation monster truck has been built on the all-newly designed KB10 4WD chassis that incorporates a shaft-type 4WD with a proven double wishbone suspension to deliver an exceptional driving experience! Equipped with lightweight resin telescopic universal shafts on all four wheels to reduce drive loss and prevent drive shaft dropouts in contact, full ball bearing for superior drive efficiency, oil-filled shocks for super smooth damping action, a powerful 2850kV brushless motor unit that reaches a maximum speed of 75km/h and a powerful waterproof 80A brushless ESC that can handle up to 3S (11.1V) LiPo batteries! All you need is a LiPo pack and AA batteries for the transmitter to experience the thrill with this Mad Wagon! Features: Fully assembled, painted and Ready-to-Run Powerful waterproof 80A brushless ESC up to 3S (11.1V) compatible Powerful 2850kV brushless motor unit that reaches a maximum speed of 75km/h Newly designed chassis that incorporates a shaft-type 4WD with a proven double wishbone suspension to deliver exceptional driving performance Equipped with lightweight resin telescopic universal shafts on all four wheels to reduce drive loss and prevent drive shaft dropouts in contact Full ball bearing for superior drive efficiency Rigid center brace designed chassis Oil-filled shocks for super smooth damping action Aggressive all-terrain 2.8" tires and wheels Original wagon-type body design High quality aluminum main chassis Double wishbone suspension 1/8 scale Inferno NEO ST 3.0 drivetrain parts All-metal gears 9g servo Specifications: Scale: 1/10 Drive train: 4WD Powerplant: Electric Motor kV rating: 2850kV Input Voltage: 2-3S LiPo Connector Type: T-Style Length: 472mm Width: 350mm Height: 198mm Wheelbase: 295mm Weight: 3,610g (approx.) Gear Ratio: 15.22:1 Needed to Complete: (1) 2S-3S Lipo pack (1) Compatible charger (4) AA for transmitter This product was added to our catalog on April 8, 2022
$399.99
KYOSHO KYO34932B, Kyosho Hang On Racer Honda NSR500 Electric 1/8 Motorcycle Kit
KYO34932B, Kyosho Hang On Racer Honda NSR500 Electric 1/8 Motorcycle Kit The Kyosho Hang on Racer is still as popular as ever. The S.D.S.S (semi direct steering system) delivers high performance fully independent motion with the rider figure incorporating 13 different articulating joints so it hangs on to the bike as it leans into corners. The result is driving performance just like a real motorcycle that is easy enough for anyone to control. Each section of the bike is designed with an incredible level of scale detail. From the body cowl, inverted front fork suspension, brake disk & calipers, wheels, drive chain, sprocket and asymmetrical swing arm - this is an RC model that is packed full of realism that makes it worthy of display. However, as only a few parts are used in construction, even beginners can enjoy the satisfaction of the assembly that only takes a short time to complete. Dive deep into the fascinating realm of R/C electric motorcycles like never before and discover the pure enjoyment of building, displaying and driving your own Hanging On Racer. Features: Recreation of the Honda NSR500 that competed in the 1991 Road Racing World Championship Grand Prix (WGP) 500cc class Features chain drive system incorporating sprocket and mini chain, similar to a real motorbike. Includes Le Mans DM20 motor with moderate power and easy control characteristics. Unique S.D.S.S enables full bank cornering. Twin tube style mainframe optimizes space utilization with air-cooling. Inverted front fork suspension. Rear suspension uses asymmetrical swing arm with mono-shock friction damper. Specifications: Length: 270mm Width: 98mm Height: 190mm Wheelbase: 185mm Tire (F/R): 78×18mm/86×23mm Gear Ratio: 13.80:1-19.30:1 Weight: 750g (approx.) Motor: Le Mans DM20 Includes: Unassembled chassis kit Pinion gear (10T, 12T, 14T) Grease Cross wrench Pinion gear tool Needed to Complete: 2 channel R/C system Battery for model (7.2V-1600mAh Ni-MH recommended) (1) servo (L32 x W16 x H31.5 max.) (1) ESC (L34×W24×H14mm max.) Batteries for transmitter Battery charger Charger Adapter Paint and paintbrush This product was added to our catalog on September 5, 2022
$159.99
Kyosho KYO39213C, Kyosho Fazer Mk2 Acura NSX 1/10 Touring Car Body Set (Clear) (200mm)
KYO39213C, Kyosho Fazer Mk2 Acura NSX 1/10 Touring Car Body Set (Clear) (200mm) Kyosho Fazer Mk2 Acura NSX 1/10 Touring Car Clear Body Set. This optional body is intended for the Kyosho Fazer Mk2 1/10 touring car to allow you to customize the body with your own paint, design and color scheme and stand out from the crowd. Package includes one clear and untrimmed body, a rear wing, a front splitter, molded wing mounts, molded accessories and an NSX GT3 decal sheet. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted This product was added to our catalog on November 02, 2023
$69.99
KYOSHO KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger
KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run. Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023
$249.99
KYOSHO KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio
KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio Kyosho Seawind ReadySet Racing Yacht. The large aspect ratio of the long span keel and tight response from the push-pull rudder control make up the Seawind's race-ready specifications. Sharp acceleration brings the Seawind quickly up to full speed while exceptional energy efficiency delivers maximum stability in light winds so you can use light breeze like a pro. The classic design features a molded one-piece ABS hull factory finished in a beautiful color design that comes fitted with a 2.4GHz RC system that automatically manages frequency band selection. The sail and rudder servos are waterproof and deliver exceptional reliability under various conditions. Features: Readyset installed with 2.4Ghz R/C system realized at a value price Pre-assembled one-piece ABS hull complete with coloring The aluminum mast and boom are hard anodized for extra strength Features extruded high strength aluminum mast and boom Features pre-cut and sewn spin cloth main and jib sails Large aspect ratio keel provides low resistance and excellent performance even under strong winds The super strong structure features shaft from deck through to the ballast Ballast is lead-free for environmentally friendly specifications Equipped with a rubber cap for easy release of water from the hull Packed with accessory parts for extra detail as a display model Push-pull rudder and sail control provide sure control for sharp racing performance Features waterproof sail and rudder servo The main mast, keel, ballast and rudder can be detached without the use of any tools Specifications: Length: 998mm Width: 226mm Height: 1,850mm Weight: 3,100g R/C System: Syncro KT-431S, 2.4GHz, FHSS Sail Area: 39dm2 Servo: Sail KS9071-20SW / Rudder KS4031-06W Needed to Complete: (8) AA Batteries This product was added to our catalog on April 14, 2023
$449.99
KYOSHO KYO70707, Kyosho 550 Class G-Series G14L Brushed Motor
KYO70707, Kyosho 550 Class G-Series G14L Brushed Motor This is the Kyosho 550 Class G-Series G14L Brushed Motor. This motor features a 550 size can and is a 14T motor. Features preinstalled wire leads and bullet connectors for select Kyosho ReadySet vehicles. This product was added to our catalog on December 16, 2021
$19.99
KYOSHO KYO82135, Kyosho Syncro KR-331 Receiver
KYO82135, Kyosho Syncro KR-331 Receiver This is the Kyosho Syncro KR-331 2.4GHz Receiver, as used in the RC Surfer 3 This product was added to our catalog on November 2, 2023
$23.99
KYOSHO KYO97054-2R-B, Kyosho Fazer FZ02 2-LED Light Set (Red)
KYO97054-2R-B, Kyosho Fazer FZ02 2-LED Light Set (Red) Kyosho Fazer FZ02 2-LED Light Set. This optional LED set features two red LED's on a factory assembled 400mm long wire harness. Add a custom touch to your ride with this red LED set. This product was added to our catalog on March 19, 2024
$10.99
KYOSHO KYO97054-4B, Kyosho Fazer FZ02 4-LED Light Set (Clear)
KYO97054-4B, Kyosho Fazer FZ02 4-LED Light Set (Clear) Fazer FZ02 4-LED Light Set. Package includes factory assembled wire string with four clear 5mm bulbs on a 40mm long wire. This product was added to our catalog on June 29, 2021
$14.99
KYOSHO KYO97054-4CR, Kyosho Fazer FZ02 LED Light Set (Clear/Red)
KYO97054-4CR, Kyosho Fazer FZ02 LED Light Set (Clear/Red) Kyosho Fazer FZ02 LED Light Set. This is an optional light set intended for the Kyosho Fazer FZ02 platform. Package includes one prewired light set consisting of two white (clear) lights and two red lights. This product was added to our catalog on June 29, 2021
$14.99
KYOSHO KYO97054-4R-B, Kyosho Fazer FZ02 4-LED Light Set (Red)
KYO97054-4R-B, Kyosho Fazer FZ02 4-LED Light Set (Red) Kyosho Fazer FZ02 4-LED Light Set. This is an optional light kit intended for the Kyosho Fazer featuring red LEDs. Package includes one 4-LED light set. This product was added to our catalog on June 29, 2021
$14.99
You have seen 48 out of 112 products