Products

100 products


  • Sale -25% GUI1004, Vought F4U-4 Corsair Kit, 30.5"

    Guillow GUI1004, Vought F4U-4 Corsair Kit, 30.5"

    Out of stock

    GUI1004, Vought F4U-4 Corsair Kit, 30.5" Nicknamed the “Sweetheart of Okinawa” by the U.S. Marines and “Whistling Death” by the Japanese, the Corsair performed effectively in two years- the Pacific conflict of World War 2 and the Korean engagement of the early 1950’s. The first production Corsair flew on June 25, 1942 at a time when the Japanese offensive seemed irresistible. It was not until late that year, with the delivery of the first Corsair squadrons into the hands of the U.S. Marines on Guadalcanal and the Solomon Islands, that the tide of air combat was permanently turned in favor of the Allied Forces. Product Specifications Completion Level Kit Under 250g FAA Weight Limit Yes Material Wood

    Out of stock

    $110.99$83.24

  • Sale -18% TAM58613-60A, Tamiya Toyota Supra 1/10 4WD Drift Spec Kit (TT-02D)

    Tamiya TAM58613-60A, Tamiya Toyota Supra 1/10 4WD Drift Spec Kit (TT-02D)

    Out of stock

    This is a Tamiya 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit. One of the most recognized Japanese sports cars around the world is the Toyota Supra. It has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Tamiya brings this well-known machine in the form of a Drift Kit on the TT-02D Drift Spec chassis. The Supra depicted in this kit is that of the Mark IV A80, which ceased to be produced in 2002. TT-02 Drift Chassis  Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.  Features: Bathtub-type Frame  Shaft Driven 4WD  Front/Rear 4-Bevel Resin Differentials  3-Piece Steering Tie-Rod  4-Wheel Double Wishbone Suspension  Front/Rear CVA Oil Shocks 540 Sport-Tuned Motor  Full Ball Bearings  Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Length: 457mm Width: 186mm Height: 125mm  Wheelbase: 257mm Tire Width/Diameter (Front & Rear): 24/63mm  Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)  Needed to Complete: 2 channel radio system Steering servo Polycarbonate paint for body 7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.) Compatible Battery Charger

    Out of stock

    $256.00$209.99

  • TAM58703-A, RC AU TOM'S GR Supra TT02

    Tamiya TAM58703-A, RC AU TOM'S GR Supra TT02

    Out of stock

    This R/C model recreates the Toyota GR Supra GT500. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." The accurately depicted au Tom's GR Supra body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish. Specifications: 1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm. The body is made of lightweight, rigid polycarbonate with separate polycarbonate front light cases (LEDs are not attachable) and canards. Separate black ABS resin parts realistically depict distinctive side mirrors and a large rear wing. The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability. 12-spoke gun metal wheels are paired with racing slick tires. Includes motor and THW-1060 ESC.

    Out of stock

    $189.99

  • TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01) TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01)

    Tamiya TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01)

    Out of stock

    TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01) Tamiya BBX 2WD Off-Road Buggy Kit BBX 2WD Off-Road Buggy Kit. The RBX BB-01 scale Dune buggy was inspired by Tamiya's back catalog of iconic 2WD off-road buggies. This high performance off-road machine features a redesigned chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage, and employs rear trailing arm suspension inspired by full-size UTV’s. All this is wrapped in a 0.7mm thick polycarbonate body designed and crafted by the renowned Japanese artist Atsushi Arino, features a classic 1980’s-inspired livery, complemented by retro wheels and tires for a nostalgic touch. Features: Full ball bearings and universal drive shafts TA06 rear ball differential for consistent traction Four-wheel double wishbone suspension system One-piece monocoque frame and roll cage Metal-plated bead lock type wheels are paired with large-diameter tires Removable rear cage for ease of maintenance Specifications: Scale: 1/10 Length: 16.2in (414mm) Width: 9.1in (233mm) Height: 5.3in (136mm) Wheelbase: 11.1in (283mm) Drive: 2WD Power Source: Electric Assembly Level: Kit Includes: (1) Tamiya BBX 2WD Off-Road Buggy Kit (BB-01) Needed to Complete: ESC and Motor (1) 2-channel Transmitter/Radio (1) Low Profile Steering Servo (1) 2S (7.2V-7.4V) Battery (1) Compatible charger Polycarbonate paint for body This product was added to our catalog on August 1, 2023

    Out of stock

    $255.99

  • Sale -19% TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit

    Tamiya TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit

    5 in stock

    TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit This is the Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit. An upgraded version of the TT-02 Type-S kit Series that comes loaded with Tamiya Hop-up parts, 37mm drive shafts, aluminum propeller shaft and lightweight aluminum joint cups to reduce 7.8g of the weight, making this kit a capable performer out of the box and a great option to start racing! Note: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Included Tamiya Hop-Up options: 37mm Drive shafts for double Cardan joint shafts Carbon fiber damper stays XV-02/TT-02 oil gear differential unit XV-02/TT-02 (39T) front direct coupling set 06 Module (27T) hard-coated aluminum pinion gear TRF419 Suspension upgrade set Aluminum propeller shaft (68T) High speed gear set 5mm Thick clamp type blue aluminum wheel hex TRF damper oil seal Cross joints for low friction assembly universal shafts Short ball connector nuts for TRF dampers Blue 4mm aluminum serrated wheel nut Universal drive shafts to maintain a stable drivetrain regardless of suspension stroke Full ball bearings Independent double wishbone suspension Front direct spool ensures ease of assembly and stable drivability Specifications: Scale: 1/10 Chassis Type: TT-02 Suspension: Independent double wishbone Suitable Terrain: On-Road Drivetrain: 4WD Shaft Driven Includes: (1) Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit (1) Carrying case dedicated for the TT-02 Type-SRX chassis Needed to Complete: (1) 2-channel Transmitter/Radio (1) Steering Servo (1) 1/10 Electronic Speed Controller (1) 540 motor, (1) 7.2 - 7.4V battery Compatible charger 257mm Polycarbonate body Polycarbonate paint for body Tires This product was added to our catalog on July 31, 2023

    5 in stock

    $359.00$289.99

  • TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT

    Team Losi Racing TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT

    Out of stock

    TLR03008, TEN-SCTE 3.0 Race Kit: 1/10 4WD SCT Key Features Champion pedigree Adjustable center driveline 22™ platform Gen II shocks Dog bone center drive Many popular tuning parts included as standard Lightweight, hard-anodized 7075-T6 aluminum chassis 3mm shorter chassis Carbon fiber shock towers Hard-anodized suspension balls Lightweight, CNC-machined outdrives High-performance TLR® body Needed To Complete Assembly Tools 2-Channel Radio and Receiver Electronic Speed Controller 540 or 550 sized motor Pinion Gear Steering Servo 1/10th Short Course Truck Tires and Inserts Battery Pack (3S Maximum) Charger Polycarbonate Paint Video Overview Overview The TEN-SCTE platform has been the dominant force in the 4WD SCT class since its inception. With the TEN-SCTE 3.0 kit, TLR engineers started with the championship-winning 2.0 and refined its suspension geometry to be optimized for all track conditions. These refinements also make the truck easier to drive. Other changes include center driveline adjustability and the inclusion of parts that were considered optional on the SCTE 2.0 kit. Champion Pedigree The TEN-SCTE platform's extensive list of race wins includes the ROAR Nationals, the Cactus Classic and a multitude of other major events. The TEN-SCTE 3.0 kit builds on this heritage by giving racers yet another superbly engineered SCT that can put them on the top of the podium. Adjustable Center Driveline The motor and center diff can be mounted at an angle or in line with the chassis, allowing adjustment of the power bleed between the front and rear drivetrain. Mounted at an angle, the power bleeds evenly front-to-rear and the truck will drive out of the turns harder from point to point. Mounted in line, more power bleeds to the rear, giving the truck more aggressive on-power steering. 22™ Platform Shocks Gen II platform shocks reduce overall weight and lower the CG. Machined shock internals, X-rings, TiCN shock shafts and aluminum bleeder caps provide a smoother, more consistent shock. The truck lands better, jumps better, corners quicker and has a lighter, more nimble feel. Dog-Bone Center Drive The center dog bones provide less friction than CVA-type driveshafts, allowing for easier front-to-rear power transfer. This smoothes out changes in power delivery, making the truck easier to drive. Popular Tuning Parts Included Many parts that were previously considered options come standard on the TEN-SCTE 3.0. These include a chassis that is 3mm shorter, 22 platform shocks, a dog-bone center driveline, 15° caster blocks, hard-anodized aluminum suspension balls, a 2.3mm thick front sway bar, lightweight outdrives, and adjustable aluminum front and rear pivots. CNC-Machined Aluminum Chassis The lightweight chassis is machined from durable 7075-T6 hard-anodized aluminum and is 3mm shorter than the stock TEN-SCTE 2.0 chassis. The shorter chassis makes the 3.0 a nimble truck that changes direction quicker and exits turns harder. It also makes it easier to drive fast and lower lap times. Carbon Fiber Shock Towers The ultimate in performance and durability, carbon-fiber shock towers save weight and help lower the CG. Hard-Anodized Suspension Balls To keep the suspension links smooth and free of slop, hard-anodized aluminum suspension balls are used throughout the truck. They are lighter than their steel counterparts and the hard-anodized coating keeps them from wearing so connector fit is always perfect. Lightweight Outdrives Lightweight, CNC-machined outdrives are used throughout the truck. This makes the entire drivetrain lighter so drivers enjoy quicker, more responsive acceleration. High-Performance TLR® Body This incredibly popular body is back for the 3.0. Made from durable 1.2mm polycarbonate, it delivers all the downforce needed to corner fast and stay in control when flying down the straights. During jumps, air under the body is channeled through strategically placed vents so the truck is more stable while airborne. Finishing the body is easy thanks to its pre-cut wheel wells, bumpers and edges. About all that's left to do is cut the vent holes and apply the paint scheme. Note: Kit includes clear body. Shown painted for example only. Product Specifications Approximate Assembly Time 3-5 Hours Ball Bearings Full Sealed Ball Bearing Body Clear, 1.2 PC Hi-Performance SCT Chassis 3mm plate, 7075-T6 aluminum Completion Level Kit Drivetrain 4WD Power Type Electric Gear Pitch 1.0 Module Internal Gear Ratio 3.9:1 Product Height 7.3 in (185mm) Product Length 21.34 in (524mm) Product Weight 6.3 lb (2.9 kg) Product Width 11.65 in (295.8mm) Receiver Sold Separately Scale 1/10 Shock Type Hard Anodized Aluminum Speed Control Sold Separately Spur Gear 40T Suspension Independent Vehicle Type Short Course Truck Wheelbase 13.15 in (334mm)

    Out of stock

    $499.99

  • TLR03009, 22SCT 3.0 Race Kit: 1/10 2WD Short Course Truck TLR03009, 22SCT 3.0 Race Kit: 1/10 2WD Short Course Truck

    Team Losi Racing TLR03009, 22SCT 3.0 Race Kit: 1/10 2WD Short Course Truck

    Out of stock

    TLR03009, 22SCT 3.0 Race Kit: 1/10 2WD Short Course Truck

    Out of stock

    $399.99

  • TLR03015, 22T 4.0 Race Kit: 1/10 2WD Stadium Truck

    Team Losi Racing TLR03015, 22T 4.0 Race Kit: 1/10 2WD Stadium Truck

    Out of stock

    TLR03015, 22T 4.0 Race Kit: 1/10 2WD Stadium Truck

    Out of stock

    $379.99

  • TLR03017, 22 5.0 AC Race Kit: 1/10 2WD Buggy Astro/Carpet

    Team Losi Racing TLR03017, 22 5.0 AC Race Kit: 1/10 2WD Buggy Astro/Carpet

    Out of stock

    TLR03017, 22 5.0 AC Race Kit: 1/10 2WD Buggy Astro/Carpet

    Out of stock

    $299.99

  • TLR03020, Team Losi Racing 1/10 22X-4 4WD Buggy Race Kit TLR03020, Team Losi Racing 1/10 22X-4 4WD Buggy Race Kit

    Team Losi Racing TLR03020, Team Losi Racing 1/10 22X-4 4WD Buggy Race Kit

    Out of stock

    Features Shaft Drive Platform Fully Adjustable Suspension Premium Parts Included 2.5 Milled Aluminum Chassis G3 12mm Big Bore Shocks All New Gear Diffs Adjustable Inner Pivots Optimized Suspension Composites Elastomer Battery Mounting Floating Servo Mount Adjustable Motor and Battery Position Fresh 22X-4 Body Design Carbon Fiber Optimized All Metric Hardware TLR 6.5" Rear Wing Easy Access Diffs Built-In Motor Fan Mount Overview TLR® customers have been asking for it and now it's finally here! 40 years in the making, the all-new Team Losi Racing® 22X-4™ Race Kit is the shaft driven 4WD buggy racers have dreamt about. Taking a completely different approach to a TLR 4WD buggy, the R&D team has developed an all-new platform from the ground up. Switching to the more reliable and versatile shaft drive design, the 22X-4 is much lighter and has improved driving characteristics while also being significantly easier to build and maintain. The 22X-4 has a combination of features second-to-none including full adjustable suspension, 2.5 milled aluminum chassis, floating servo mount, adjustable motor and battery position, carbon fiber throughout, and so much more. Designed to dominate right out of the box, the 22X-4 Race Kit is performance-oriented and podium ready. Needed to Complete Motor Electronic Speed Control Servo Radio System Charger Battery Paint Tools Tires Pinion Gear CA Glue What's in the Box? (1) TLR® 1/10 22X-4 Race Buggy Kit (1) Product Manual

    Out of stock

    $499.99

  • TLR03022, 22 5.0 DC ELITE Race Kit: 1/10 2WD Dirt/Clay TLR03022, 22 5.0 DC ELITE Race Kit: 1/10 2WD Dirt/Clay

    Team Losi Racing TLR03022, 22 5.0 DC ELITE Race Kit: 1/10 2WD Dirt/Clay

    Out of stock

    TLR03022, 22 5.0 DC ELITE Race Kit: 1/10 2WD Dirt/Clay The TLR 22 5.0 DC Elite 1/10 2WD Electric Buggy Kit gives drivers a professional grade, full team-level kit all in one box! Optimized for dirt and clay tracks, the ELITE kit features fully adjustable rear pivots, adjustable height rear hubs, carbon fiber option parts throughout, and all the aluminum parts have been changed to a sharp black anodizing with silver chamferred edges to pop against the hard anodized chassis and shock bodies. Building on the improvements to the 22 5.0, the ELITE kit is significantly easier to drive while still giving the car more mid-corning steering with the revised steering geometry, smoother G3 shocks, and the optimized flex of the 2mm chassis plate. Designed to win straight out of the box, the 22 5.0 DC ELITE maximizes performance and is podium ready. NOTE: Painted body, wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model.  Features at a Glance: Pro Level Ready Carbon Fiber Options Included Aluminum Options Included New Adjustable Rear Hub and Pivots Titanium Turnbuckles Included Revamped steering geometry Super Heavy Duty Slipper (SHDS) Laydown transmission configuration Stiffezel suspension components Fully Updated Differential Built-In Motor Fan Mount Lightweight body 2.0 Milled aluminum chassis Gen3 12mm big-bore shocks Front Roll Center Adjustment New Front Camber Block and Battery Hold Down Ballast tuning options (ballast sold separately) In Depth Features: Pro Level Ready: Including all of the key option parts that the TLR factory race team uses to win across the world, the 22 5.0 DC ELITE is truly Pro Level Ready from a kit build right out of the box... more so than any 2WD buggy kit ever offered. Parts include Carbon Fiber, Black Anodized Aluminum and Titanium turnbuckles. Carbon Fiber Parts Included: The overwhelming popular carbon fiber option and tuning parts for the 22 5.0's have been added into the kit. +2mm front and rear shock towers, electronics mounting plate, and a rear wing washer are now included in the kit! Aluminum Option Parts Included: As the team has found many of the optional aluminum parts for the 22 5.0 to improve maintenance or performance, those are now included in the kit as well. Aluminum options included are the bell cranks, drag link, servo mount, outer front bearing inserts, rear camber block, C and D pivots, and aluminum nuts throughout. Redesigned Rear Hubs and Inner Rear Pivots: The 22 5.0 DC ELITE includes Inner Rear Pivots with roll center, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs which also give more roll center and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced. Titanium Turnbuckles Included: Titanium turnbuckles have always been a premium upgrade for race vehicles, and there could not be a proper 22 5.0 DC ELITE kit without them. Included are titanium turnbuckles throughout the buggy to save weight and increase performance. Revamped Steering Geometry: The 22 5.0 is the best driving 2wd Team Losi Racing has ever created, and the biggest improvement comes from the steering geometry. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 a significantly smoother steering feel, especially off-center and high speed, while increasing low-speed steering for tighter tracks and 180's. Super Heavy Duty Slipper (SHDS): The slipper is optimized with redesigned slipper plates, slipper pads, spring, spur gears, and a redesigned top shaft. The top shaft uses a sturdy M4 lock nut, the slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and thicker slipper plate keep consistent pressure across the surface of the slipper pads. G3 12mm Big Bore Shocks: The G3 shocks give the 22 5.0 the plush handling and consistent, leak-free bleed as the Gen II shocks, but with some long-anticipated ease of use improvements. No more e-clips as the pistons are now secured by screws, redesigned shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, while updated eyelets and spring cups provide -3mm, 0mm and +4mm spring cup off-sets and paired with the eyelets will never pop off with the screw in feature. The eyelets are also made in two lengths that allow racers to switch between different heights, and work with revised shock balls that finally slide into the front arms smoothly and easily. 2.0 Milled Aluminum Chassis: Maximizing the flex characteristics for all surfaces, the 2.0mm thick chassis give the right about of flex and rigidity for smooth corning, optimized balance, and bounce-free landings. Fully Updated Differential: Using all of the revised components from the 22 2.0 ball differential, the 22 5.0 diff will deliver super-smooth, long-lasting performance. Features include revised thrust washers, tungsten carbide diff and thrust balls, a one piece nut, and a self-centering diff gear. 22 5.0 Body: Maintaining the excellent balance, grip, and stability of the 22 4.0 body, with a similar styling, the 22 5.0 body is pulled from 0.8mm PC plate for a lightweight body that still has fantastic durability. As with all TLR bodies, the 5.0 body will be precut in the kit. TLR Low Front Wing Included: With the higher speed, higher grip tracks of today, a front wing will increase steering in high speed turns and on power, while making the steering on entry smoother - the best of all worlds. All Metric Hardware: Using all metric hardware make it easy to find replacement screws, nuts and washers, and helps to limit the number to tools required in the toolbox. Diff Height Adjustment: The 22 4.0 included diff height adjustments including 0 and +3.5mm settings. The 22 5.0 DC includes 0mm, +1mm, +1.75mm, +2.5mm, and +3.5mm diff heights to optimize bone plunge for different axle heights, ride heights, and grip levels. Front Roll Center Adjustment: The 22 5.0 includes the standard Low Roll Center (LRC) front pivot with kick shim in the kit and offers the optional High Roll Center (HRC) front pivot separately. A new 1mm thick kick shim is also included. Now, racers can run the Super Low Roll, Low Roll, Medium Roll, or High Roll Centers, or High Roll Center, with a 3mm adjustment window. Updated Front Camber Block: The front camber block adds a third camber link option between the tradition inside and outside holes. The new position provides the best balance of steering and stability in many conditions, and allows the 22 5.0 to be more dialed-in on more different grip levels. Updated Battery Hold Down: The 22 5.0 boasts the most versatile and easiest to use battery hold down system. The battery cradles key into the mud guards for five fixed, and easy to duplicate, battery positions. The battery is then held down with elastomer straps on each end that can stretch to fit any height shorty battery and any weight plates under it. Best of all, the battery is out in no time flat and back in just as easily. Optimized Composites: The balance and consistency of the 22 5.0 can be tuned using different composite materials in key parts throughout the vehicle. The kit included the parts the race team prefers: Stiffezel front suspension arms, mud guards, and waterfall and soft rear suspension arms. Ballast Tuning Options: Optional brass ballast weighs can be mounted under the servo, under the battery, and under the laydown transmission idler. This makes it easy to tune the static weight and weight bias for changing track conditions. When running a higher static weight, the chassis will become more neutral and easier to drive on ultra-high-grip surfaces. TLR 6.5" Rear Wing: Pulled from ultra-durable 1.2mm polycarbonate, the TLR 6.5" rear wing isn't new for the 5.0. Instead, this wing has proven itself as the longest lasting and most stable rear wing available for 1/10 2wd buggies over the past few years - and it comes in your kit. Built-In Motor Fan Mount: The prevalence of spec racing has led to the need for many racers to run motor fans to keep temperatures lower. Rather than an aluminum mount, or double-sided tape, the 22 5.0 includes a molded fan mount secured to the mud guard for easy and dependable fan mounting. Laydown Configuration: The laydown 3-gear transmission moves the motor forward by 20mm+ to a more centralized location. The benefit is a chassis that drives much flatter and carries more corner speed. Specifications: Approximate Assembly Time: 3-5 Hours Ball Bearings: Full set, rubber sealed Batteries: Sold separately Body: Cab forward, 0.03" (0.7mm) thick Bushing Material: Metal Charger: Sold separately Chassis: 7075-T6 Aluminum Milled Plate 0.08" (2mm) thick Completion Level: Kit Differential: Ball Type Drivetrain: 2WD Gear Pitch: 48-Pitch Height: 5.8" (148mm) Internal Gear Ratio: 2.43:1 Length: 15" (382mm) Max Battery Dimensions: 5.5 x 1.8 x 0.96" (139.7 x 46 x 24.5mm) Motor Type: Brushless (sold separately) Pinion: Not Included Radio: 2-channel sold separately Servos: High torque steering servo (sold separately) Shock Type: Oil filled 12mm Big Bore Size/Scale: 1/10 Spur Gear: 78T,72T Suspension: Stiffezel Front Suspension Arms, Soft Rear Suspension Arms Track: Front and Rear 9.8" (249mm), distance from outer edges of tires measured side-to-side Vehicle Type: 2WD Dirt and Clay Racer Water-Resistant: Yes Wheel Diameter: 2.2" (56mm) sold separately Wheel Hex Size: 12mm Hex Wheelbase: 11" (280mm) Width: 9.8" (250mm) Includes: (1) 22 5.0 DC ELITE Kit (1) 22™ 5.0 Cab Forward Body (1) Product Manual Needed to Complete: Motor Electronic Speed Control Servo Radio System 48 Pitch Pinion Gear Battery and Charger Wheels and Tires Paint Tools - Please refer to the manual for more details

    Out of stock

    $419.99

  • TLR04009, 8IGHT XT/XTE Race Kit: 1/8 4WD Nitro/Elec Truggy TLR04009, 8IGHT XT/XTE Race Kit: 1/8 4WD Nitro/Elec Truggy

    Team Losi Racing TLR04009, 8IGHT XT/XTE Race Kit: 1/8 4WD Nitro/Elec Truggy

    Out of stock

    TLR04009, 8IGHT XT/XTE Race Kit: 1/8 4WD Nitro/Elec Truggy Product Detail  In The Box (1) TLR 8IGHT XT/XTE Nitro/Electric Truggy Race Kit (1) Product Manual  Needed to Complete (1) Transmitter and Receiver (1) Steering Servo (1) Compatible Battery Charger (1) Tire Glue (4) Tires Polycarbonate Paint Tools (Please reference the manual for more details) For Electric Power: (1) Brushless Motor (1) Brushless ESC (1) 4S 14.8V LiPo Battery For Nitro Power: (1) Nitro Engine and Tuned Pipe (1) Receiver Battery (1) Receiver Switch (1) Throttle Servo (1) Fuel Bottle (1) 20-30% Nitro Fuel (1) Starter Box Quick Links Features Nitro and Electric Parts Included Improved Suspension Geometry Flex Tune Suspension Arms Wider 3mm Chassis Larger Pinion Bearing Cab Forward Style Body Chassis Side Guards Large Footprint Nitro Engine Mount One Piece Electric Motor Mount Adjustable Caster Blocks Bleeder Shock Caps Balanced Chassis Ackerman Adjustable Draglink Steering Rack Machined Aluminum Shock Towers Better Diff Access Sway Bar System Equalized Driveline Updated Radio Tray Optimized Shocks Ball Bearing Throttle and Brake Actuator Large Bearing Spindles and Carriers Shorter Wheelbase LiPo/LiIon Compatible Battery Box Overview The new Team Losi Racing® 8IGHT-XT/XTE Next Generation Truggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat. Plus, it includes Nitro and Electric in one box! The 8IGHT-XT/XTE has a combination of features second-to-none including large footprint engine mount, 3mm chassis, cab forward body, machined aluminum shock caps, and so much more. Designed to win straight out of the box, the 8IGHT-XT/XTE expands performance and is ready for the winner's circle.   Nitro and Electric parts included All of the items to run either nitro or electric included in one box.   Improved Suspension Geometry The 8IGHT-XT/XTE Next Gen suspension geometry has been completely revamped making a truck that is fast, nimble, and easy to drive. This includes a myriad of updates including wider front pivot with less scrub radius, narrower rear pivot, longer front and rear arms, and updated hub offset.   Flex Tune Suspension Arms All new suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The kit will include molded plates with optional carbon fiber plates available separately.   Wider 3mm Chassis Chassis width has been increased to aid in stability and give the truggy a more neutral feel as well as equalized side to side for equal torsional flex and thinned down to 3mm for weight savings.   Larger Pinion Bearing The internal pinion bearing size in the front and rear has been increased for added durability.   Cab Forward Style Body Cab forward design helps with overall down force, which improves steering and overall stability.   Chassis Side Guards New chassis side guards that have an improved fit onto the chassis.   Large Footprint Nitro Engine Mount Lightweight large footprint engine mount that reduces flex underneath the engine to eliminate chassis fatigue on high traction race surfaces for nitro.   One Piece Electric Motor Mount One piece aluminum motor mount that is easy to adjust pinion sizing for electric motors.   Adjustable Caster Blocks 17.5 deg caster blocks that allow the height of the spindle to be adjusted.   Bleeder Shock Caps Machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil.   Balanced Chassis The weight has been moved forward in the chassis to provide a better driving balance to the vehicle and less parts needed to carry.   Ackerman Adjustable Steering Rack Redesigned steering rack which will allow more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads.   Machined Aluminum Shock Towers Redesigned machined 7075-T6 aluminum shock towers with updated camber link holes.   Better Diff Access The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle.   Sway Bar System New sway bar system that has adjustable length links to allow better equalization of each side of sway bar as well as collars that keep the sway bars centered.   Equalized driveline The center drive shaft angles have been modified so they are equal front to rear allowing for a more 4wd feel to the vehicle.   Updated Radio Tray An updated radio tray now puts the throttle servo near the engine to eliminate additional linkage. The updated radio tray will ensure the throttle servo is rigidly mounted to avoid any flex by floating the servo off of the center differential.   Optimized Shocks The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car.   Ball Bearing Throttle and Brake Actuator The throttle and brake actuator uses ball bearings in order to give a super smooth feel on the throttle.   Large Bearing Spindles and Carriers All four corners of the vehicle have been updated to use large ball bearings and the same bearings.   Shorter Wheelbase The wheelbase has been shortened to aid in grip as well as provide more agile handling.     LiPo/Li-Ion Compatible Battery Box The battery box has been designed so that you can now fit either common LiPo receiver packs or Li-Ion receiver packs.   Product Specifications Product Length 21.1" (536 mm) Ball Bearings Full set Chassis 0.12" (3mm ) 7075-T6 hard anodized aluminum Completion Level Kit Drivetrain 4WD Drive Type Forward/Reverse Product Height 7.3" (185 mm) Product Weight 9.0 Vehicle Type Truggy Water-Resistant Yes Front Track 15.8" (402mm) Product Width 16.6" (422 mm) Radio Sold Separately Power Type Electric/Nitro Gear Pitch 1.0 Mod Servos Sold Separately Charger Sold Separately Differential 3 sealed viscous filled gear diffs Max Battery Dimensions 5.4 x 1.8 x 1.5" (138 x 47 x 40mm) Receiver Sold Separately Shock Type Aluminum body, oil-filled Final Drive Ratio 16.6:1 Rear Track 15.8" (402mm) Speed Control Sold Separately Wheelbase 14.7" (373mm) Approximate Assembly Time Approximately 3-5 hours Body Unpainted Brakes Ball bearing equipped brake actuator Scale 1/8 Gear Ratio 4.5:1 Ground Clearance 1.6" (40mm) Internal Gear Ratio 4.5:1 Suspension Independent Track Surface 15.8" (402mm) front and rear Spur Gear 48T Fuel Tank Capacity 5.1oz (150cc) Engine Size .21 cu in (3.4cc) sold separately Battery Sold Separately

    Out of stock

    $769.99

  • TLR04010, 8IGHT-X Elite Race Kit: 1/8 4WD Nitro Buggy TLR04010, 8IGHT-X Elite Race Kit: 1/8 4WD Nitro Buggy

    Team Losi Racing TLR04010, 8IGHT-X Elite Race Kit: 1/8 4WD Nitro Buggy

    Out of stock

    TLR04010, 8IGHT-X Elite Race Kit: 1/8 4WD Nitro Buggy

    Out of stock

    $719.99

  • TLR04011, 8IGHT-XE Elite Race Kit: 1/8 4WD Electric Buggy

    Team Losi Racing TLR04011, 8IGHT-XE Elite Race Kit: 1/8 4WD Electric Buggy

    Out of stock

    TLR04011, 8IGHT-XE Elite Race Kit: 1/8 4WD Electric Buggy

    Out of stock

    $729.99

  • XP-10008, Gear Differential Case and Cover XP-10008, Gear Differential Case and Cover

    Xpress XP-10008, Gear Differential Case and Cover

    1 in stock

    XP-10008, Gear Differential Case and Cover

    1 in stock

    $6.12

  • XP-10009, Gear Differential Bevel Satellite Gears Set XP-10009, Gear Differential Bevel Satellite Gears Set

    Xpress XP-10009, Gear Differential Bevel Satellite Gears Set

    4 in stock

    XP-10009, Gear Differential Bevel Satellite Gears Set

    4 in stock

    $6.12

  • XP-10011, Gear Differential Repair Parts XP-10011, Gear Differential Repair Parts

    Xpress XP-10011, Gear Differential Repair Parts

    14 in stock

    XP-10011, Gear Differential Repair Parts

    14 in stock

    $4.99

  • XP-10022, Gear Differential Set For Xpress Execute GripXero Series XP-10022, Gear Differential Set For Xpress Execute GripXero Series

    Xpress XP-10022, Gear Differential Set For Xpress Execute GripXero Series

    1 in stock

    XP-10022, Gear Differential Set For Xpress Execute GripXero Series

    1 in stock

    $34.84

  • XP-10052, Kevlar Drive Belt Rear 3 x 189 mm XP-10052, Kevlar Drive Belt Rear 3 x 189 mm

    Xpress XP-10052, Kevlar Drive Belt Rear 3 x 189 mm

    10 in stock

    XP-10052, Kevlar Drive Belt Rear 3 x 189 mm

    10 in stock

    $5.94

  • XP-10053, Spur Gear 64P 116T XP-10053, Spur Gear 64P 116T

    Xpress XP-10053, Spur Gear 64P 116T

    9 in stock

    XP-10053, Spur Gear 64P 116T

    9 in stock

    $3.18

  • XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series

    Xpress XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series

    1 in stock

    XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series

    1 in stock

    $31.78

  • XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs

    Xpress XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs

    Out of stock

    XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs

    Out of stock

    $18.34

  • XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm

    Xpress XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm

    4 in stock

    XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress. This product was added to our catalog on December  30 , 2023

    4 in stock

    $14.99

  • XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount

    Xpress XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount

    Out of stock

    XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount This product was added to our catalog on April 10, 2023

    Out of stock

    $13.99

  • XP-10121, 5.5mm Pivot Ball 8Pcs XP-10121, 5.5mm Pivot Ball 8Pcs

    Xpress XP-10121, 5.5mm Pivot Ball 8Pcs

    1 in stock

    XP-10121, 5.5mm Pivot Ball 8Pcs

    1 in stock

    $15.16

  • XP-10125, Aluminum Gear Diff Outdrive Adaptor 2pcs For Execute GripXero Series

    Xpress XP-10125, Aluminum Gear Diff Outdrive Adaptor 2pcs For Execute GripXero Series

    Out of stock

    XP-10125, Aluminum Gear Diff Outdrive Adaptor 2pcs For Execute GripXero Series

    Out of stock

    $15.64

  • XP-10128, DRIVESHAFT PROTECTOR BLADE XP-10128, DRIVESHAFT PROTECTOR BLADE

    Xpress XP-10128, DRIVESHAFT PROTECTOR BLADE

    6 in stock

    XP-10128, DRIVESHAFT PROTECTOR BLADE  Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ1S XQ2S XM1S FT1S FM1S DR1S, GripXero D1 Material: Thermoplastic Color: White Include: Driveshaft Protector Blades (8 pcs) This product was added to our catalog on October 20, 2023

    6 in stock

    $6.99

  • XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs

    Xpress XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs

    Out of stock

    XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs

    Out of stock

    $11.00

  • XP-10139, Xpress 3.0mm Suspension Pivot Pin XP-10139, Xpress 3.0mm Suspension Pivot Pin

    Xpress XP-10139, Xpress 3.0mm Suspension Pivot Pin

    Out of stock

    XP-10139, Xpress 3.0mm Suspension Pivot Pin This product was added to our catalog on May 8, 2023

    Out of stock

    $5.49

  • XP-10156, Steel Turnbuckle 29mm 4pcs XP-10156, Steel Turnbuckle 29mm 4pcs

    Xpress XP-10156, Steel Turnbuckle 29mm 4pcs

    8 in stock

    XP-10156, Steel Turnbuckle 29mm 4pcs

    8 in stock

    $10.00

  • XP-10157, Steel Steering Turnbuckle Set XP-10157, Steel Steering Turnbuckle Set

    Xpress XP-10157, Steel Steering Turnbuckle Set

    2 in stock

    XP-10157, Steel Steering Turnbuckle Set This product was added to our catalog on May 8, 2023

    2 in stock

    $11.49

  • XP-10163, Composite Servo & Horn Belt Tensioner Set XP-10163, Composite Servo & Horn Belt Tensioner Set

    Xpress XP-10163, Composite Servo & Horn Belt Tensioner Set

    3 in stock

    XP-10163, Composite Servo & Horn Belt Tensioner Set

    3 in stock

    $4.88

  • XP-10166, Steel Double Joint Universal Shaft 2pcs

    Xpress XP-10166, Steel Double Joint Universal Shaft 2pcs

    Out of stock

    XP-10166, Steel Double Joint Universal Shaft 2pcs

    Out of stock

    $31.28

  • XP-10168, SOFT SPRING PAIR BLACK XP-10168, SOFT SPRING PAIR BLACK

    Xpress XP-10168, SOFT SPRING PAIR BLACK

    7 in stock

    XP-10168, SOFT SPRING PAIR BLACK Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S Material: Steel Color: Black Include: Spring (2 pcs) This product was added to our catalog on October 22 , 2023

    7 in stock

    $4.99

  • XP-10179, Gear Differential Gasket 5pcs XP-10179, Gear Differential Gasket 5pcs

    Xpress XP-10179, Gear Differential Gasket 5pcs

    10 in stock

    XP-10179, Gear Differential Gasket 5pcs

    10 in stock

    $5.86

  • XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series

    Xpress XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series

    8 in stock

    XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series This product was added to our catalog on December 30, 2023  

    8 in stock

    $23.99

  • XP-10220, Camberlink Stiffener Set

    Xpress XP-10220, Camberlink Stiffener Set

    Out of stock

    XP-10220, Camberlink Stiffener Set

    Out of stock

    $22.00

  • XP-10222, Xpress Graphite Option Steering Knuckle Plate XP-10222, Xpress Graphite Option Steering Knuckle Plate

    Xpress XP-10222, Xpress Graphite Option Steering Knuckle Plate

    4 in stock

    XP-10222, Xpress Graphite Option Steering Knuckle Plate Change to this graphite steering plate which offers a stiffer steering structure which in return gives you a sharper steering response and feeling! You will need to install a 2mm bumpsteer shim to get the same amount of bumper steer as the stock steering plate. Feature: For: Xpress Execute XQ1 XQ10 XQ10F FT1 XQ1S XQ2S FT1S Material: Graphite Color: Black Includes: Graphite Option Steering Knuckle Plate (2 pcs) This product was added to our catalog on October 20, 2023

    4 in stock

    $17.99

  • XP-10236, 4.8mm Ball 5mm Thread 4pcs XP-10236, 4.8mm Ball 5mm Thread 4pcs

    Xpress XP-10236, 4.8mm Ball 5mm Thread 4pcs

    3 in stock

    XP-10236, 4.8mm Ball 5mm Thread 4pcs

    3 in stock

    $6.36

  • XP-10239, 4.8mm Ball 10mm Thread 4pcs XP-10239, 4.8mm Ball 10mm Thread 4pcs

    Xpress XP-10239, 4.8mm Ball 10mm Thread 4pcs

    2 in stock

    XP-10239, 4.8mm Ball 10mm Thread 4pcs

    2 in stock

    $6.36

  • XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring

    Xpress XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring

    2 in stock

    XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring

    2 in stock

    $36.66

  • XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S

    Xpress XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S

    5 in stock

    XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S This product was added to our catalog on November 21, 2023

    5 in stock

    $13.00

  • XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs

    Xpress XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs

    8 in stock

    XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs This product was added to our catalog on May 8, 2023

    8 in stock

    $4.99

  • XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs

    Xpress XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs

    Out of stock

    XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs

    Out of stock

    $3.66

  • XP-10254, 4.8mm Low Profile Ball End Set XP-10254, 4.8mm Low Profile Ball End Set

    Xpress XP-10254, 4.8mm Low Profile Ball End Set

    3 in stock

    XP-10254, 4.8mm Low Profile Ball End Set

    3 in stock

    $15.16

  • XP-10259, Aluminum Center Post XP-10259, Aluminum Center Post

    Xpress XP-10259, Aluminum Center Post

    2 in stock

    XP-10259, Aluminum Center Post

    2 in stock

    $3.66

  • XP-10264, Xpress Composite Spool 38T Set For Execute Series XP-10264, Xpress Composite Spool 38T Set For Execute Series

    Xpress XP-10264, Xpress Composite Spool 38T Set For Execute Series

    11 in stock

    XP-10264, Xpress Composite Spool 38T Set For Execute Series This product was added to our catalog on May 8, 2023

    11 in stock

    $12.99

  • XP-10270, COMPOSITE CENTER PULLEY 20T 2PCS FOR EXECUTE XP-10270, COMPOSITE CENTER PULLEY 20T 2PCS FOR EXECUTE

    Xpress XP-10270, COMPOSITE CENTER PULLEY 20T 2PCS FOR EXECUTE

    8 in stock

    XP-10270, COMPOSITE CENTER PULLEY 20T 2PCS FOR EXECUTE Feature: For: Xpress Execute Series Material: Composite  Color: Black Include: Composite Center Pullies (2 pcs This product was added to our catalog on October 22 , 2023

    8 in stock

    $4.99


You have seen 48 out of 100 products

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account