MR286, 1969 Mustang VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on June 1, 2023

Read more less

PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) This is the 190mm Protoform Cadillac ATS-V.R Clear Touring Car Body. Cadillac Racing stormed back into the motorsports spotlight in 2015 with their factory-works ATS-V.R race car, the third generation of V-Series race cars. Built to international FIA GT3 specifications, this pedigree allows it to potentially run in more than 30 different GT series around the world. The ATS-V.R has proven a success with top drivers Johnny O’Connell and Andy Pilgrim at the wheel, scoring multiple overall wins and pole positions in the World Challenge series. PROTOform is proud to bring the racing heritage of Cadillac back to 1/10 190mm Touring Cars with our officially-licensed rendition of the Cadillac ATS-V.R. With every detail of the full-scale race car captured and an extensive decal sheet, racers will appreciate the ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. This 2-door coupe race body is formed from genuine .030” lexan and includes injection-molded wing struts to support a unique rear wing design. The wing features 2 different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the PROTOform ATS-V.R suitable to any kind of GT-class rules. As always, wing mounting hardware, and paint-then-peel overspray film are included. Features: Made with Genuine GE .030 lexan Replica body of the factory-works Cadillac Racing GT3-spec race car Molded wing struts and dual-trim wing design Officially-licensed by General Motors Proudly Made in the USA Specifications: Length: 17.5" (445mm) Width: 7.63" (194mm) Height: 4.29 (109mm) Wheelbase: 10.2" (258mm) Includes: Clear Cadillac ATS-V.R body (2) Molded nylon wing struts Mounting hardware Extensive decal sheet Paint-then-peel over spray film, & window masks This product was added to our catalog on July 16, 2021

Read more less

TRA6717, Traxxas Rustler 4X4 Body (Clear) This product was added to our catalog on September 7, 2021

Read more less

MR304, McAllister Racing 1970 Camaro Trans Am VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Detail Decals. window mask and overspray film included with body. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars.  Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023

Read more less

PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) This is the Protoform 1971 Pontiac Firebird Trans Am VTA Body. Vintage Trams Am class racing has taken off in the past few years as an opportunity for racers to break in to on-road R/C, providing close racing, scale realism and warm and fuzzy feelings of the good ol’ days of American road course racing. The Pontiac Firebird Trans Am was one of the signature cars of the former full-scale series, and now PROTOform has captured its trademark look in the release of the 1971 model for your VTA class R/C Touring Car. From its aggressive front “beak”, to the duck tail-style rear spoiler, to the mother of all macho items, – the shaker hood scoop – no detail was overlooked. The front nose cone is molded separately, and when mounted with the 2mm screws and/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included.  This officially licensed product is produced in genuine .030 Lexan® material and meets all VTA Class rules. The clear body comes with protective overspray film, window masks, detailed decal sheet that lets you choose to style your Firebird as a full-blown race car, or head-turning street machine. Features: Made with Genuine GE .030 lexan Fits touring cars set up for Vintage Trans Am Rules Exceptional scale detail and realism Fully Licensed by General Motors Specifications: Length: 17.87” (454mm) Width (front wheelwells): 7.8” (198mm) Width (rear wheelwells): 8.15” (207mm) Height: 4.17” (106mm) Wheelbase: 10.24” (260mm) This product was added to our catalog on May 3, 2023

Read more less

MR315, McAllister Racing AAR "Cuda" VTA  1/10th scale, 8" wide (200mm), 10" wheelbase (255mm).  Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars.  Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023

Read more less

PRM152600, Protoform J71 Vintage Racing Body (Clear) This is the Protoform J71 Clear Body, intended for use in the VTA class. The addition of the J71 to the VTA scene will add new excitement to an already diverse class of racing, and is guaranteed to shake things up! The J71 features all the unique styling cues of the original car, as well as a molded in rear spoiler. The front of the car features an add-on nose with air dam, and when mounted with shoo goo and 2mm screws it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is supplied with the body. This provides the user with a lightweight, durable .030 lexan body, which in turn aids the handling ability of any VTA chassis. The VTA class has proven that its here to stay, and the Protoform J71 will definitely make things more interesting. Features: Made from extremely durable .030 Lexan® material 200mm wide at the front and 210mm across the rear wheel openings Add-on front nose with air dam Paint then peel over spray film, sticker sheet, and window masks included Exceptional detail for the Vintage style we all enjoy Specifications: Length: 16.9" (429mm) Front Width: 7.9" (200mm) Rear Width: 8.3" (210mm) Height: 3.9" (110mm) Wheel Base: 10.2" (260mm) Includes: (1) Clear J71 body (2) Front Body Nose Piece (1) Mounting Hardware (1) Window Masks (1) Decal Sheet  This product was added to our catalog on May 3, 2023

Read more less

MR273, McAllister Racing #273 ASA Style Camaro Late Model Body This is a body only. This product was added to our catalog on December 28, 2023

Read more less

MR298, McAllister Racing #298UL 1/10 Xfinity Camaro Ultra Light Body This is a 1/10 Scale Xfinity Camaro Ultra Light Body.  Features: Compatible with 1/10 scale pan cars and touring cars. Clear, unpainted body. Made from 0.020 Ultra Light thickness genuine Lexan. Made in the USA. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars.  This product was added to our catalog on October 9, 2023

Read more less

MR192, McAllister Racing 2003 Mustang Cobra Mustang Cobra 190mm Body is Clear and comes with window masks. Body is Painted to show finished product. No detail sheet is included. This is a body only. This product was added to our catalog on June 1, 2023

Read more less

YOKYZ-870C, Yokomo Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Retro Iconic Buggy with Modern Capabilities & Performance Stop Reminiscing and bring the 80s 4WD Off-Road buggy racing back to life with the ultimate off-road machine that enlivened the 1980s off-road scene! It is no exaggeration to say that it became the foundation of modern off-road racing, and it is a legendary platform that boasted overwhelming speed in off-road races to gain so much popularity during that golden era or RC Racing! Although Yokomo kept the design and shape untouched, in order to utilize current power sources, this reproduced version comes equipped with gear differentials and a slipper clutch, providing a drive train capable of running powerful modern Lipo batteries. In addition, to further modify the platform to accommodate today's power supply, the battery tray was designed to fit big and small capacity models shorty LiPo batteries! Despite the fact that this vintage race machine comes with the original body, wing, and under cowling to faithfully recreate the original buggy, it has been fully updated for today’s modern power system, while also maintaining much of the original vintage feel! Equipped with aluminum bulkheads, aluminum front and rear knuckles, FRP shock towers, FRP main chassis and hard anodized aluminum shocks, providing much needed durability and boosting performance! Get the legendary Super Dog Fighter and experience the modern performance in a retro style! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: A Re-release version of the original legendary buggy released in 1987 Hard anodized aluminum shocks Aluminum bulkhead Aluminum front and rear knuckles FRP main chassis with a battery tray that can accommodate sub-C size batteries, as well as shorty lipo batteries. Original FRP front and rear shock towers Durable gear differentials and a slipper clutch to accommodate the modern power sources and output. Adjustable turnbuckles Specifications: Scale: 1/10 Drivetrain: Belt Driven 4WD Power Supply: Electric Completion Level: Unassembled kit Includes: (1) Super Dog Fighter 1/10 4WD Off-Road Electric Buggy Kit Needed to Complete: (1) 2 Channel radio system (1) Steering servo (1) 540 Motor (1) Electronic speed control (1) 7.2V NiMh or 2S Shorty LiPo Battery (1) Compatible Battery Charger This product was added to our catalog on January 12, 2024

Read more less

MR225, McAllister Racing #225 2006 Monte Carlo Stock Car Body This is a body only. This product was added to our catalog on December 28, 2023

Read more less

MR419, McAllister Sprint Car Driver Driver Figure requires painting.  -Comes with a separate helmet to be attached with double faced tape.-Clear and unpainted.  -Fits perfectly in Sprint Cars This product was added to our catalog on June 1, 2023

Read more less

MR293, McAllister Racing #293 GEN 6 Fusion body This product was added to our catalog on October 9, 2023

Read more less

MR423 McAllister Racing Stock Car Driver & Interior -Stock car interior with great details for 1/10 cars. Comes clear and untrimmed.  -9 1/4" wide and 11 3/4" long -Made from .030 Genuine Made in USA Lexan.  -Made in America! This product was added to our catalog on June 1, 2023

Read more less

YOKSD-PM90LWA, Yokomo PANDEM Light & Wing Parts Set (Clear) Yokomo PANDEM Clear Light and Wing Parts Set. This is an optional kit intended to fit the Yokomo PANDEM 90 body. Using incredible attention to detail Yokomo has recreated the scale details of this set while still keeping the parts light weight. Constructed from durable clear polycarbonate this set offers strength and the ability to customize the color to your liking. The included headlight and taillight brackets give you the ability to add LED lights for the ultimate in scale looks. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted.Includes: (1) PANDEM Light and Wing Parts Set including: (1) Front Bumper with Headlight Buckets (1) Rear Bumper with Taillight Buckets (1) Rear Wing Assembly Double Sided Mounting Tape This product was added to our catalog on June 1, 2023

Read more less