Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

Traxxas E-Revo

42 products


  • Monster Truck Terrain Crusher Belted tire pre-glued on WHD wheel 2pc set Monster Truck Terrain Crusher Belted tire pre-glued on WHD wheel 2pc set

    Sweep Racing Monster Truck Terrain Crusher Belted tire pre-glued on WHD wheel 2pc set

    1 in stock

    Monster Truck Terrain Crusher Belted tire pre-glued on WHD wheel 2pc set This is a pair of Sweep Terrain Crusher Belted Monster Truck Tires, Pre-Mounted on black WHD wheels. The WHD wheels feature a 12 spoke pattern, 1/2 offset, and a 17mm hex for fitment with most 1/8 trucks and monster trucks. The Terrain Crusher is an all terrain tire tread pattern meant for high speed and high power applications. Features: Pre-glued on WHD 12 Spoke wheels with open cells inserts Wheels made out of Sweep's top secret ROK Hard strong material Sweep's own rubber compound mixture perfected over a year of R&D at the US facility Cast molded tires offer a near perfect balance, for longer lifespan and more traction than injection molded tires Fully belted Specifications: Tire: Proprietary Compound Wheel: 17mm Heavy Duty Hex, 1/2" Wide offset  Belted: Yes O/D: 142mm Width: 80mm Weight: 331gr/Ea Fits: Revo / E-Revo 1/10th series w/ 17mm hex hub Summit series w/ 17mm hex hub Arrma R/C cars w/ 17mm hex hub Traxxas Tmaxx / Emaxx w/ 17mm hex hub Axial Racing Yeti XL w/ 17mm hex hub HPI Savage w/ 17mm hex hub Losi LST XXL w/ 17mm hex hub DHK Maximus w/ 17mm hex hub  This product was added to our catalog on October 3, 2021

    1 in stock

    $79.99

  • HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)

    Hot Racing HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)

    6 in stock

    HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options. NOTE: Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh) With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. Features: CNC machined hardened steel construction Black oxide finished Laser etched tooth count marking Upgrade for factory plastic spur gear Specifications: Overall diameter: 52.8mm Gear face width: 8mm  Includes: One (1) mod 1 steel spur gear This product was added to our catalog on December 16, 2021

    6 in stock

    $30.99

  • TRA5378X, Traxxas Revo Pivot Ball Caps w/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust TRA5378X, Traxxas Revo Pivot Ball Caps w/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust

    Traxxas TRA5378X, Traxxas Revo Pivot Ball Caps w/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust

    14 in stock

    TRA5378X, Traxxas Revo Pivot Ball Caps w/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust Replacement part for these models: Traxxas E-Revo VXL 2.0 Traxxas Revo Nitro This product was added to our catalog on September 7, 2021

    14 in stock

    $6.75

  • PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)

    Pro-Line PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)

    1 in stock

    PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires. These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere. Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Team Associated MGT Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx Features: Tire: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 5.85" (149mm) Width: 2.72" (69mm) Includes: (2) Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 14, 2021

    1 in stock

    $59.99

  • TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black) TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black)

    Traxxas TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black)

    4 in stock

    TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black) This is a pack of two replacement Traxxas Talon EXT 3.8" Tires, Pre-Mounted to Black wheels with a splined 17mm hex. These tires have been glued to the wheel and include an inner foam insert. Just install and go! TSM Rated. NOTE: These wheels only fit the Traxxas Splined 17mm Axle Hexes; they will not work with standard 17mm hexes. This product was added to our catalog on May 7, 2021

    4 in stock

    $45.00

  • TRA5472, Traxxas Wheelie Bar Assembled (fits all 1/10th scale Revo trucks) TRA5472, Traxxas Wheelie Bar Assembled (fits all 1/10th scale Revo trucks)

    Traxxas TRA5472, Traxxas Wheelie Bar Assembled (fits all 1/10th scale Revo trucks)

    4 in stock

    TRA5472, Traxxas Wheelie Bar Assembled (fits all 1/10th Scale Revo trucks) Revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric. The wheelie bar assembly is easy to install for controlled wheelies on demand. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it is time to head off-road, a convenient quick release tab makes removal and installation a snap. The wheelie bar mount is compatible with all factory Revo configurations including sway bars and wing mounts. This product was added to our catalog on July 31, 2021

    4 in stock

    $20.00

  • TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4) TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4)

    Traxxas TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4)

    22 in stock

    TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability. This product was added to our catalog on September 7, 2021

    22 in stock

    $12.00

  • TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control

    Traxxas TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control

    3 in stock

    TRA3485, Traxxas Velineon VXL-6S Electronic Speed Control Specifications: Input Voltage: 2x 2s/3s LiPo (Max 25.2 volts) Case Size: 2.23x2.83x1.81in (58x72x46mm) Weight: 206.5g (7.28oz) Motor Connectors: Traxxas 6.5mm Bullet Connectors BEC Voltage: 6.0 V BEC Continuous Current: 10A BEC Peak Current: 20A Power Wire: 10-Gauge Maxx Cable Input Harness Wire: 26 Gauge / 295mm Low Voltage Detection: 2-Stage indicators, switchable (on or off) Thermal Protection: 2-Stage thermal shutdown Profile selection: Sport Mode: 100% FWD, 100% BRAKES, 100% REV Race Mode: 100% FWD, 100% BRAKES, NO REV Training Mode: 50% FWD, 100% BRAKES, 50% REV Battery Input Connector: Traxxas High-Current Connector Motor Types: Brushless Replacement part for these models: E-Revo VXL Brushless Unlimited Desert Racer This product was added to our catalog on May 7, 2021

    3 in stock

    $159.99

  • HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T) HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T)

    Hot Racing HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T)

    2 in stock

    HRAERVT52M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (52T) This product was added to our catalog on December 16, 2021

    2 in stock

    $30.99

  • HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T) HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T)

    Hot Racing HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T)

    33 in stock

    HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas X-Maxx Traxxas XO-1 Traxxas XRT This product was added to our catalog on December 16, 2021

    33 in stock

    $30.99

  • HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)

    Hot Racing HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)

    9 in stock

    HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T) This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4. Features: CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Grey-colored countersunk washers Specifications: Number of Teeth: 53 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: 6mm (0.24 inch) Internal diameter: ~11mm (~0.43 inch) Includes: 54 tooth 32 pitch spur gear (3) mounting screws (3) grey-colored countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) Requires: Hardened clutch bell or pinon gear Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential. This product was added to our catalog on December 16, 2021

    9 in stock

    $23.99

  • TRA8655R, Traxxas E-Revo 2.0 Steel Center Driveshafts TRA8655R, Traxxas E-Revo 2.0 Steel Center Driveshafts

    Traxxas TRA8655R, Traxxas E-Revo 2.0 Steel Center Driveshafts

    3 in stock

    TRA8655R, Traxxas E-Revo 2.0 Steel Center Driveshafts Traxxas E-Revo 2.0 Steel Center Driveshafts. Package includes an optional set of center driveshafts intended for the E-Revo 2.0 and hardware. This product was added to our catalog on September 7, 2021

    3 in stock

    $59.99

  • TRA8674, Traxxas E-Revo/Sledge Paddle Tires 3.8" Pre-Mounted w/Monster Truck Wheels (Black) (Standard)

    Traxxas TRA8674, Traxxas E-Revo/Sledge Paddle Tires 3.8" Pre-Mounted w/Monster Truck Wheels (Black) (Standard)

    Out of stock

    TRA8674, Traxxas E-Revo/Sledge Paddle Tires 3.8" Pre-Mounted w/Monster Truck Wheels (Black) (Standard) Traxxas Paddle Tires 3.8" Pre-Mounted with Monster Truck Wheels. Package includes two pre-mounted paddle tires intended for the Traxxas E-Revo VXL. This product was added to our catalog on September 7, 2021

    Out of stock

    $54.99

  • TRA8655, Traxxas E-Revo VXL 2.0 Center Half Shafts (2) TRA8655, Traxxas E-Revo VXL 2.0 Center Half Shafts (2)

    Traxxas TRA8655, Traxxas E-Revo VXL 2.0 Center Half Shafts (2)

    17 in stock

    TRA8655, Traxxas E-Revo VXL 2.0 Center Half Shafts (2) This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts. This product was added to our catalog on May 7, 2021

    17 in stock

    $4.00

  • TRA8632, Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set (Black) TRA8632, Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set (Black)

    Traxxas TRA8632, Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set (Black)

    3 in stock

    TRA8632, Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set (Black) The Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skatepark, or preparing for the next speed run, these arms were built for extreme punishment. Package includes optional front left upper and lower suspension arms. This product was added to our catalog on May 7, 2021

    3 in stock

    $12.00

  • PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    Pro-Line PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    6 in stock

    PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2)  Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels Fits: Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Tekno RC MT410 Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx This product was added to our catalog on March 4, 2021

    6 in stock

    $74.99

  • TRA8650, Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft TRA8650, Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft

    Traxxas TRA8650, Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft

    Out of stock

    TRA8650, Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft This product was added to our catalog on September 7, 2021

    Out of stock

    $12.00

  • TFE5791, Traxxas E-Revo 2.0 VXL Brushless Sealed Bearing Kit

    Fast Eddy Bearings TFE5791, Traxxas E-Revo 2.0 VXL Brushless Sealed Bearing Kit

    Out of stock

    Traxxas E-Revo 2.0 VXL Brushless Sealed Bearing Kit TFE5791, FastEddy Traxxas E-Revo 2.0 VXL Brushless Sealed Bearing Kit This product was added to our catalog on December 16, 2021

    Out of stock

    $37.99

  • TRA8652, DRIVE CUP MACHINED STEEL (2)

    Traxxas TRA8652, Drive cup, machined steel (2)/ 4x17mm screw pins (2)

    6 in stock

    TRA8652, Drive cup, machined steel (2)/ 4x17mm screw pins (2) Replacement part for these models: E-Revo® VXL Brushless This product was added to our catalog on September 7, 2021

    6 in stock

    $18.00

  • TRA8635, Traxxas Axle Carrier Set TRA8635, Traxxas Axle Carrier Set

    Traxxas TRA8635, Traxxas Axle Carrier Set

    5 in stock

    TRA8635, Traxxas E-Revo Axle Carrier Set This is a replacement Traxxas Axle Carrier Set. This set includes the left and right side, and is for use with 8x16mm and 17x26mm ball bearings. Package also includes four dust boot retainers. This product was added to our catalog on September 7, 2021

    5 in stock

    $10.00

  • TRA8651, Traxxas E-Revo 2.0 Driveshaft Rebuild Kit TRA8651, Traxxas E-Revo 2.0 Driveshaft Rebuild Kit

    Traxxas TRA8651, Traxxas E-Revo 2.0 Driveshaft Rebuild Kit

    2 in stock

    TRA8651, Traxxas E-Revo 2.0 Driveshaft Rebuild Kit This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshafts. This product was added to our catalog on May 8, 2021

    2 in stock

    $4.00

  • TRA3481, Traxxas Unlimited Desert Racer Brushless Motor (2200Kv) TRA3481, Traxxas Unlimited Desert Racer Brushless Motor (2200Kv)

    Traxxas TRA3481, Traxxas Unlimited Desert Racer Brushless Motor (2200Kv)

    3 in stock

    TRA3481, Traxxas Unlimited Desert Racer Brushless Motor (2200Kv) The Traxxas Unlimited Desert Racer Motor is a 4-pole 2200Kv, brushless motor. This is the replacement motor for the UDR. Motor is factory wired with 6.5mm bullet connectors.  Specifications: Can Length: 77.5mm Can Diameter: 41.8mm Total Length: 98.5mm Shaft Length: 21mm Shaft Diameter: 4.99mm This product was added to our catalog on April 16, 2021

    3 in stock

    $139.99

  • PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    Pro-Line PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    2 in stock

    PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires feature a High-Performance herringbone weave pattern belt, molded  inside the relentless, tall and grippy tread of the Trencher HP tire. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere!  Features: Tires: Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 3.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.70" (170mm) Width: 4.15" (105mm) Includes: (2) Pre-Mounted Trencher HP 3.8" Belted Tires on Raid Black 8x32 Removable Hex Wheels  (2) 8x32 to 17mm 1/2" Offset Hex Adapters  (16) M3 x 12mm long SHCS hardware  This product was added to our catalog on August 20, 2021

    2 in stock

    $74.99

  • TRA5446, Traxxas Revo Wing Black TRA5446, Traxxas Revo Wing Black

    Traxxas TRA5446, Traxxas Revo Wing Black

    3 in stock

    TRA5446, Traxxas Revo Wing Black This product was added to our catalog on May 7, 2021

    3 in stock

    $14.00

  • TRA8629, BULKHEAD REAR U/L (REQ 8622)

    Traxxas TRA8629, Traxxas E-Revo Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

    1 in stock

    TRA8629, Traxxas E-Revo Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis) This product was added to our catalog on September 7, 2021

    1 in stock

    $16.00

  • TRA8686, DIFF F/R COMPLETE E-REVO VXL

    Traxxas TRA8686, DIFF F/R COMPLETE E-REVO VXL

    5 in stock

    TRA8686, DIFF F/R COMPLETE E-REVO VXL Accessory part for these models: E-Revo® VXL Brushless This product was added to our catalog on September 7, 2021

    5 in stock

    $79.99

  • TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4) TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4)

    Traxxas TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4)

    2 in stock

    TRA8654R, Traxxas 17mm Splined Wheel Hub Hex (Red) (4) Traxxas E-Revo VXL 2.0 Traxxas Maxx Traxxas Sledge This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Red anodize. Also included are four 4x5mm set screws and four 3x14mm pins. TECH NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use. This product was added to our catalog on September 7, 2021

    2 in stock

    $20.00

  • TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T) TRA6487R, PINION 15-T 1.0 MP MACHINED

    Traxxas TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T)

    9 in stock

    TRA6487R, Traxxas Machined Mod 1.0 Pinion Gear w/5mm Bore (20T) Traxxas Machined Mod 1.0 Pinion Gear with 5mm Bore. This is an optional machined pinion gear intended for the Traxxas E-Revo 2.0 and the Traxxas Maxx. The gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one pinion gear.NOTE: For use with steel spur gears. Traxxas E-Revo VXL 2.0 Traxxas X-Maxx Traxxas XO-1 Traxxas XRT This product was added to our catalog on September 7, 2021

    9 in stock

    $10.00

  • TRA8630, BULKHEAD FRONT UPPER/LOWER

    Traxxas TRA8630, Traxxas E-Revo Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

    4 in stock

    TRA8630, Traxxas E-Revo Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis) This product was added to our catalog on September 7, 2021

    4 in stock

    $16.00

  • TRA5660, Traxxas E-Revo Aluminum Motor Mount TRA5660, Traxxas E-Revo Aluminum Motor Mount

    Traxxas TRA5660, Traxxas E-Revo Aluminum Motor Mount

    3 in stock

    TRA5660, Traxxas E-Revo Aluminum Motor Mount This is a replacement Traxxas Aluminum Motor Mount, and is intended for use with the Traxxas E-Revo. This product was added to our catalog on September 7, 2021

    3 in stock

    $12.00

  • TRA5345R, Traxxas Steering Linkage & Servo Horn Set TRA5345R, Traxxas Steering Linkage & Servo Horn Set

    Traxxas TRA5345R, Traxxas Steering Linkage & Servo Horn Set

    5 in stock

    TRA5345R, Traxxas Steering Linkage & Servo Horn Set This product was added to our catalog on September 7, 2021

    5 in stock

    $8.00

  • HRAERVT14X01, CNC 3D Aluminum Center Skid Plate, for Traxxas E-Revo 2.0

    Hot Racing HRAERVT14X01, CNC 3D Aluminum Center Skid Plate, for Traxxas E-Revo 2.0

    3 in stock

    CNC 3D Aluminum Center Skid Plate, for Traxxas E-Revo 2.0 Hot Racing CNC machined billet aluminum Center Skid Plate for the Traxxas E-Revo 2.0. Features: CNC machined billet aluminum Center Skid Plate Anodized Black Replaces factory plastic skid plate This product was added to our catalog on December 16, 2021

    3 in stock

    $81.99

  • TRA8622, Traxxas E-Revo VXL 2.0 Chassis TRA8622, Traxxas E-Revo VXL 2.0 Chassis

    Traxxas TRA8622, Traxxas E-Revo VXL 2.0 Chassis

    2 in stock

    TRA8622, Traxxas E-Revo VXL 2.0 Chassis This is a replacement Traxxas E-Revo VXL 2.0 Chassis. This chassis requires the TRA8629 and TRA8630 bulkheads.  This product was added to our catalog on September 7, 2021

    2 in stock

    $28.00

  • TRA5452X, Traxxas Revo Driveshaft U-Joints

    Traxxas TRA5452X, Traxxas Revo Driveshaft U-Joints

    2 in stock

    TRA5452X, U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. This item was added to our catalog March 13, 2024

    2 in stock

    $10.00

  • TRA8613, Traxxas E-Revo 2.0 Body Support TRA8613, Traxxas E-Revo 2.0 Body Support

    Traxxas TRA8613, Traxxas E-Revo 2.0 Body Support

    Out of stock

    TRA8613, Traxxas E-Revo 2.0 Body Support This product was added to our catalog on September 7, 2021

    Out of stock

    $8.00

  • HRAERVT32M01, Aluminum Rear Body Mount (Black), for Traxxas E-Revo 2

    Hot Racing HRAERVT32M01, Aluminum Rear Body Mount (Black), for Traxxas E-Revo 2

    3 in stock

    Hot Racing aluminum rear body mount for the 1/10th scale Traxxas E-Revo, E Revo2 Revo 3.3, Slayer Pro 4X4, and Summit. Features:   CNC Machined 6061 aluminum construction Anodized black in color  

    3 in stock

    $33.99

  • HRAERVT3801, Aluminum Transmission Case, for Traxxas E-Revo2

    Hot Racing HRAERVT3801, Aluminum Transmission Case, for Traxxas E-Revo2

    3 in stock

    HRAERVT3801Aluminum Transmission Case, for Traxxas E-Revo2 Hot Racing aluminum transmission gearbox case for use in the Traxxas E-Revo2 Features:   CNC machined 6061 billet aluminum transmission case Black anodized color  

    3 in stock

    $80.99

  • HRAERVT2901, Black Aluminum Front Body Mount, for Traxxas E-Revo 2.0

    Hot Racing HRAERVT2901, Black Aluminum Front Body Mount, for Traxxas E-Revo 2.0

    2 in stock

    Black Aluminum Front Body Mount, for Traxxas E-Revo 2.0 Replace the stock plastic body posts on your Traxxas E-Revo 2.0 with this good looking aluminum front body mount from Hot Racing. Features: Aluminum construction, black in color This product was added to our catalog on December 16, 2021

    2 in stock

    $22.99

  • HRAERVT12R01, Suspension Pin Mount, for Traxxas E-Revo/ E-Revo2

    Hot Racing HRAERVT12R01, Suspension Pin Mount, for Traxxas E-Revo/ E-Revo2

    3 in stock

    Suspension Pin Mount, for Traxxas E-Revo/ E-Revo2 This is Hot Racing Suspension Pin Mount Revo E-REVO E-Revo2 Mount for the Traxxas Revo. Features: CNC machining of 6061-T6 Black anodized aluminum This product was added to our catalog on December 16, 2021

    3 in stock

    $18.99

  • HRASERVO265, Hot Racing 32P/0.8M Hardened Steel Spur Gear (Black) (65T)

    Hot Racing HRASERVO265, Hot Racing 32P/0.8M Hardened Steel Spur Gear (Black) (65T)

    4 in stock

    This is the Hot Racing 65 Tooth, 32 Pitch / 0.8Mod Hardened Steel Spur Gear in Black anodize. Features: CNC machined and lightened hardened steel construction Upgrades factory plastic gear Black oxide coating for durability and corrosion resistance Gunmetal/black anodized countersunk washers Specifications:Number of Teeth: 65Gear Pitch: 32 pitch (0.8 module)Mounting Holes: 3Tooth Face width: 6mm (0.24 inch) Includes: (1) 65 tooth 32 pitch (0.8mod) spur gear (3) mounting screws (3) washers (3) gunmetal/black anodized countersunk washers This product was added to our catalog on December 16, 2021

    4 in stock

    $23.99

  • HRARVO37V06, Hot Racing Steel CV Center Drive Shaft (E-Revo, Summit)

    Hot Racing HRARVO37V06, Hot Racing Steel CV Center Drive Shaft (E-Revo, Summit)

    Out of stock

    This is an optional Hot Racing Steel CV Center Drive Shaft. This heavy duty splined star drive center front and rear driveshaft assembly is for the Traxxas E-Revo and Summit Features: Heavy duty CNC machined #45 hardened carbon steel construction Replaces factory plastic front or rear drive axles Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Steel is black finished Includes: One (1) center front driveshaft assembly One (1) center rear driveshaft assembly Needed To Complete: Installation at rear drive assembly Recommended to maintain CV joint and shaft spline with grease Recommended to use a removable-type locking adhesive on screws threading into metal Reuses Traxxas 5145 M4/15 screw pins Specifications:Center front driveshaft approximate collapsed length: 77mm (3.0 inch)Center rear driveshaft approximate collapsed length: 129mm (5.1 inch) NOTES: Replacement drive hubs are Hot Racing HRARCV15DH. This product was added to our catalog on December 16, 2021

    Out of stock

    $61.99

  • HRARVO288V06, Hot Racing Traxxas E-Revo Steel SSD CV Drive Set (2) HRARVO288V06, Hot Racing Traxxas Revo Steel SSD CV Drive Set (2)

    Hot Racing HRARVO288V06, Hot Racing Traxxas E-Revo Steel SSD CV Drive Set (2)

    8 in stock

    HRARVO288V06, Hot Racing Traxxas E-Revo Steel SSD CV Drive Set (2) The Hot Racing Traxxas Revo Steel SSD CV Drive Set is an optional heavy duty splined star drive CVD axle kit for the front or rear of the Traxxas 1/10th scale E-Revo, E-Maxx, Revo 3.3, T-Maxx 3.3, and Summit. These shafts are compatible with vehicles that use the Traxxas TRA5451X axle shafts.Features: Heavy duty CNC machined #45 hardened carbon steel construction Replaces factory plastic Traxxas TRA5451X axle driveshaft assembly Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminates CV pin setscrew Steel is black finished Specifications: Approximate collapsed length: 151mm (5.9 inch) Approximate full extension resulting in zero shaft engagement: 199mm (7.8 inch) This product was added to our catalog on December 16, 2021

    8 in stock

    $64.99

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account