Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

PROTOForm Replacement Body

19 products


  • PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    PROTOform PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    Out of stock

    PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) The Protoform Clear Chevrolet Corvette C7 Pro-Mod Short Course Drag Car Body represents Protoforms long heritage with drag racing. This is Protoforms first body dedicated to the fast-growing SC Drag Racing class and will transform your Slash 2WD into a scale 1/4-mile beast with realistic details to give your SC drag car a super unique, race-inspired look. The C7 Pro-Mod Corvette body is a clean and convenient one piece design that allows any enthusiast to pick and apply their own unique paint scheme. Trim, mask and get creative with this slick drag body. Note: To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly. Here is the list of modifications needed to fit: Pro-Line Extended Body Mounts for Slash 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible! Traxxas® Bandit® Front Arms - TRA2531X Traxxas® Bandit® Rear Arms - TRA2750R Traxxas® Bandit® Front Caster Blocks - TRA2432 Traxxas® Bandit® Steering Blocks - TRA3636 Traxxas® Bandit® Axles - TRA2437 Traxxas® King Pins - TRA3740 Traxxas® Front Camber Turnbuckles - TRA2444 Traxxas® Rear Turnbuckles - TRA2443 Traxxas® Toe Link Turnbuckles - TRA2445 Shorten Rear Drive Shafts Remove Front Bumper Features: Modern, sleek Pro-Mod styling Incredible scale details Officially-licensed by General Motors 1-piece design Made in the USA from durable polycarbonate Specifications: Length: 25.5" (647mm) Front Width: 11.125" (282mm) Height: 11.25" (285mm) Wheelbase: 13.2" (335mm) Compatible with: Slash® 2wd Modified into a narrow Pro-Mod Drag Car  Includes:  (1) Clear Chevy® Corvette™ C7 Pro-Mod Body (1) Detailed Decal sheet Paint-then-peel over spray film & window masks This product was added to our catalog on August 28, 2021

    Out of stock

    $50.00

  • PRM626300, PROTOshine Lexan Body Cleaner

    PROTOform PRM626300, PROTOshine Lexan Body Cleaner

    Out of stock

    PRM626300, PROTOshine Lexan Body Cleaner

    Out of stock

    $15.50

  • PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm) PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm)

    PROTOform PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm)

    Out of stock

    PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm) This is the Protoform 190mm Chevrolet Corvette C7.R Clear Touring Car Body. Chevrolet’s Corvette C7.R has the set the worldwide sportscar racing scene on fire since its debut, capturing the triple-crown of GTLM-class endurance racing with wins at the 24 Hours of Le Mans, 24 hours of Daytona and 12 Hours of Sebring. PROTOform brings Corvette Racing’s championship heritage to USGT class racing with the officially-licensed Corvette C7.R race body. From the signature Corvette muscular stance and swept-back roofline, to the large front splitter and side vents, every detail of the 1:1 race car is captured to add scale realism to the world of 1:10 scale 190mm touring cars. The extensive decal sheet lets you deck out your C7.R with Corvette branded windshield headers, “Jake” skull hood logo, number plates, and USA flags. Included with the body is an add-on rear wing with the USGT-sanctioned 10mm trim height, nylon wing struts, and mounting hardware. This body fits popular 190mm touring cars and is formed from high quality .030” polycarbonate. As always, window masks and paint-then-peel overspray film are included. Features:  Incredible scale details Officially-licensed by General Motors Comprehensive decal sheet included USGT Approved Made in the USA Specifications: Length: 17.5" (444.5mm) Width: 7.63" (194mm) Height: 4.01" (102mm) Wheel Base: 10.1" (256mm) Includes: Clear Chevrolet® Corvette™ C7.R body Nylon wing struts (2pcs) Wing Mounting Hardware Extensive Decal Sheet Window masks & paint-then-peel overspray film This product was added to our catalog on August 16, 2021

    Out of stock

    $33.00

  • PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    PROTOform PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    $46.99

  • PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)

    PROTOform PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)

    4 in stock

    PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) This is the 190mm Protoform Cadillac ATS-V.R Clear Touring Car Body. Cadillac Racing stormed back into the motorsports spotlight in 2015 with their factory-works ATS-V.R race car, the third generation of V-Series race cars. Built to international FIA GT3 specifications, this pedigree allows it to potentially run in more than 30 different GT series around the world. The ATS-V.R has proven a success with top drivers Johnny O’Connell and Andy Pilgrim at the wheel, scoring multiple overall wins and pole positions in the World Challenge series. PROTOform is proud to bring the racing heritage of Cadillac back to 1/10 190mm Touring Cars with our officially-licensed rendition of the Cadillac ATS-V.R. With every detail of the full-scale race car captured and an extensive decal sheet, racers will appreciate the ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. This 2-door coupe race body is formed from genuine .030” lexan and includes injection-molded wing struts to support a unique rear wing design. The wing features 2 different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the PROTOform ATS-V.R suitable to any kind of GT-class rules. As always, wing mounting hardware, and paint-then-peel overspray film are included. Features: Made with Genuine GE .030 lexan Replica body of the factory-works Cadillac Racing GT3-spec race car Molded wing struts and dual-trim wing design Officially-licensed by General Motors Proudly Made in the USA Specifications: Length: 17.5" (445mm) Width: 7.63" (194mm) Height: 4.29 (109mm) Wheelbase: 10.2" (258mm) Includes: Clear Cadillac ATS-V.R body (2) Molded nylon wing struts Mounting hardware Extensive decal sheet Paint-then-peel over spray film, & window masks This product was added to our catalog on July 16, 2021

    4 in stock

    $35.99

  • Sale -20% PRM157700, Corvette C8 Clear Body Felony & Infraction PRM157700, Corvette C8 Clear Body Felony & Infraction

    PROTOform PRM157700, Corvette C8 Clear Body Felony & Infraction

    Out of stock

    PRM157700, Corvette C8 Clear Body Felony & Infraction Product Details Key Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA In The Box Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Quick Links Introduction PROTOform is now proud to bring one of the most anticipated cars Chevrolet® has ever built to the 1:7 scale ARRMA® Street Bash line of vehicles with the release of the Corvette™ C8 body for Felony™ & Infraction™. Features Incredible Scale Details Officially Licensed by General Motors Custom Front Splitter & Wing Designs Made in the USA What's Included Clear Corvette™ C8 Body Front Splitter Rear Wing Wing Mounting Hardware Extensive Decal Sheet Instruction Sheet Paint-then-peel Over Spray Film and Window Masks Overview The officially licensed body is the ultimate aerodynamic upgrade to the popular Felony™ platform, whether you are making speed runs in the back roads or drifting in the parking lot. All the exceptional details of its 1:1 counterpart including aggressive cab-forward design, sculpted side doors, and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette™ badges, windshield headers, "Jake" skulls, and USA flags. Also included are a custom add-on front splitter and rear wing to complete the super-scale look. The C8 is formed from durable 1.5mm thick high-quality polycarbonate with paint-then-peel overspray film. This body was designed with wider rear fenders as a direct fit for the Felony™ to clear the 53/107 tires. It will work with Infraction™ rear tires, but to get the optimal look and fit, you can optionally choose to either widen the rear of your Infraction™ chassis with stock rear tires or use Felony™ rear tires with modifications to the rear gear ratio. See the fits section below for the list of parts needed for these modifications. General Motors trademarks used under license to Pro-Line.Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. ©2020 Pro-Line Racing. ARRMA®, Felony™, and Infraction™ are trademarks or registered trademarks of Horizon Hobby®, LLC. All other trademarks, service marks and logos are property of their respective owners. Fits: ARRMA® Felony™ ARRMA® Infraction™ with: STOCK REAR TIRES - PARTS LIST Rear Hubs (2pcs): AR330404 Axles (8x45mm) (2pcs): AR310591 Hexes (16.5mm) (2pcs): AR310484 FELONY™ REAR TIRES - PARTS LIST (V1 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Front Input Shaft Cup (Safe-D): ARA310977 Front Input Shaft Cup Sleeve (4pcs): ARA310976 Front Main Input Gear 15T GP5: ARA311016 Front Main Diff Gear 42T GP5: ARA311017 Rear Input Shaft Cup (SAFE-D): ARA310977 Rear Input Shaft Cup Sleeve (4pcs): ARA310976 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 FELONY™ REAR TIRES - PARTS LIST (V2 INFRACTION™) 53/107 2.9 Tires (Pair): ARA550073 Rear Main Input Gear 14T GP6: ARA311018 Rear Main Diff Gear 45T GP6: ARA311019 Length:   27.25" (892mm) Width Front:   12.3" (312mm) Width Rear:   13.2" (335mm) Height:   10.1" (257mm) Wheelbase:   7.75" (196mm)       Product Specifications Body Style 2 door coupe Material Polycarbonate Product Height 7.75" (197 mm) Product Length 27.25" (692 mm) Scale 1/7 Vehicle Type On-Road Wheelbase 10.1" (257 mm)

    Out of stock

    $106.24$84.99

  • PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear)

    PROTOform PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear)

    3 in stock

    PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) This is the Protoform 1971 Pontiac Firebird Trans Am VTA Body. Vintage Trams Am class racing has taken off in the past few years as an opportunity for racers to break in to on-road R/C, providing close racing, scale realism and warm and fuzzy feelings of the good ol’ days of American road course racing. The Pontiac Firebird Trans Am was one of the signature cars of the former full-scale series, and now PROTOform has captured its trademark look in the release of the 1971 model for your VTA class R/C Touring Car. From its aggressive front “beak”, to the duck tail-style rear spoiler, to the mother of all macho items, – the shaker hood scoop – no detail was overlooked. The front nose cone is molded separately, and when mounted with the 2mm screws and/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included.  This officially licensed product is produced in genuine .030 Lexan® material and meets all VTA Class rules. The clear body comes with protective overspray film, window masks, detailed decal sheet that lets you choose to style your Firebird as a full-blown race car, or head-turning street machine. Features: Made with Genuine GE .030 lexan Fits touring cars set up for Vintage Trans Am Rules Exceptional scale detail and realism Fully Licensed by General Motors Specifications: Length: 17.87” (454mm) Width (front wheelwells): 7.8” (198mm) Width (rear wheelwells): 8.15” (207mm) Height: 4.17” (106mm) Wheelbase: 10.24” (260mm) This product was added to our catalog on May 3, 2023

    3 in stock

    $35.99

  • PRM157520, Protoform Chevrolet Corvette C8 GT12 Body (Clear) PRM157520, Protoform Chevrolet Corvette C8 GT12 Body (Clear)

    PROTOform PRM157520, Protoform Chevrolet Corvette C8 GT12 Body (Clear)

    2 in stock

    PRM157520, Protoform Chevrolet Corvette C8 GT12 Body (Clear) This is a Protoform Clear Chevrolet Corvette C8 GT12 Body, an officially licensed body that is perfectly suited for GT12 class racing. This body boasts all the exceptional details of its 1:1 counterpart, including aggressive cab forward design, striking front splitter, and sculpted side doors and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette branded windshield headers, number plates, "Jake" skulls and USA flags. The C8 fits any 1:12 pan car or GT12 specific chassis and is formed from high-quality lightweight polycarbonate with paint-then-peel overspray film. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Includes: (1) Clear Chevrolet Corvette C8 GT12 Body (1) Wing Wing mounting hardware Window masks This product was added to our catalog on December 1, 2022

    2 in stock

    $29.99

  • PRM1580-15, Protoform P63 1/10 Touring Car Body (Clear) (0.4mm) (190mm) (X-Lite) PRM1580-15, Protoform P63 1/10 Touring Car Body (Clear) (0.4mm) (190mm) (X-Lite)

    PROTOform PRM1580-15, Protoform P63 1/10 Touring Car Body (Clear) (0.4mm) (190mm) (X-Lite)

    4 in stock

    PRM1580-15, PRM158015, Protoform P63 1/10 Touring Car Body (Clear) (0.4mm) (190mm) (X-Lite) The Protoform P63 1/10 Touring Car Body has been designed using the latest aerodynamic techniques and combines high downforce, a low center of gravity and stunning looks to match. The cab-forward design provides more front-biased downforce while the sculpted sides increase side-bite. Complementing the additional downforce is the recessed trunk section giving a lower center of gravity and additional stiffness. Below the trunk section, is the high-flow rear bumper. Spending extra time in this section Protoform was able to increase airflow lowering the aerodynamic drag and squeezing every bit of efficiency out of this body. Designed to fit 190mm sedans this body gives the user the performance edge in a highly competitive racing class. Protoform's signature Mounting Marks inside the front wheel arches are back. Allowing you to choose your body positions in 2mm increments up to +8mm. In addition are markings on the hood, decklid, and rear bumper to easily line up your body posts no matter what chassis or rear body post configuration (vertical or horizontal) you prefer. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: Radical high-downforce design with a sloped hood and cab-forward layout Stiffening hood ribs for low deflection in ultra-light weights Recessed trunk section for low CG and extra stiffness Sculpted side door panels for increased side-bite High flow rear bumper area for reduced aero drag The P63 is available in three weights: X-Lite (PRM1580-15 - 0.4mm, for expert drivers only) Pro-Lite (PRM1580-20 - 0.5mm, a good all-around option) Light Weight (PRM1580-25 - 0.65, for novice drivers or windy outdoor conditions) Made in the USA Specifications: Scale: 1/10 Vehicle Type: Touring Car Length: 16.7" (424 mm) Width: 7.53" (191 mm) Height: 4.53" (115 mm) Wheelbase: 10.1" (257 mm) Includes: (1) Clear P63 190mm TC Body (X-Lite) Decal Sheet with window masks Factory applied overspray film Plastic wing buttons and under-wing "nuts", with 3mm mounting screws  This product was added to our catalog on October 28, 2023

    4 in stock

    $35.99

  • PRM156325, Protoform Chevrolet Corvette ZR1 Touring Car Body (Clear) (190mm) PRM156325, Protoform Chevrolet Corvette ZR1 Touring Car Body (Clear) (190mm)

    PROTOform PRM156325, Protoform Chevrolet Corvette ZR1 Touring Car Body (Clear) (190mm)

    Out of stock

    PRM156325, Protoform Chevrolet Corvette ZR1 Touring Car Body (Clear) (190mm) The Protoform Chevrolet Corvette ZR1 Touring Car Body is an officially-licensed Corvette ZR1 body perfectly suited for USGT Class racing. The body features all the exceptional details of its 1:1 counterpart including aggressive front splitter, uniquely-shaped high rear wing, and oversized front grilles. The extensive decal sheet lets you deck out your ZR1 with Corvette-branded windshield headers, "Jake" skull hood logo and USA flags. Lighter-weight material lowers the center of gravity of your USGT car, improving responsiveness. The body includes an add-on rear wing with the USGT-sanctioned 10mm trim height, nylon wing struts, and mounting hardware. This body fits popular 190mm touring cars and is formed from high-quality polycarbonate with paint-then-peel overspray film. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Features: Chevy® Corvette™ ZR1 Clear Body Injection molded wing struts (2 pcs) Extensive Decal sheet Wing mounting hardware (4 pcs) Paint-then-peel over spray film & window masks Fits 190mm TC Specifications: Length: 17.5" (444.5mm) Width: 7.63" (194mm) Height: 4.01" (102mm) Wheelbase: 10.1" (256mm) This product was added to our catalog on June 20, 2021

    Out of stock

    $31.99

  • PRM157930, Protoform 1967 Dodge Dart Vintage Racing Body (Clear) PRM157930, Protoform 1967 Dodge Dart Vintage Racing Body (Clear)

    PROTOform PRM157930, Protoform 1967 Dodge Dart Vintage Racing Body (Clear)

    Out of stock

    PRM157930, Protoform 1967 Dodge Dart Vintage Racing Body (Clear) The Protoform 1967 Dodge Dart Vintage Racing Body is a 1/10 scale replica for VTA class racers that celebrates one of most unique cars in the famous Trans-Am series. Protoform has captured all the details of the 3-time race-winning car, with its distinctive flat-sided, compact-muscle look, and it fits 190mm touring cars fitted with VTA tires & wheels, as well as 200mm size chassis'. For more aero tuning, an add-on decklid spoiler is also included. This officially licensed body is formed from a single piece of high-quality, lightweight polycarbonate and requires no assembly. The Dart meets all VTA Class rules and includes a detailed decal sheet with rear stripes, protective overspray film, and window masks.NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Features: Made with High Quality, Lightweight Polycarbonate One-piece Design with Realistic Undercuts Fits Touring Cars set up for Vintage Trans Am Rules Exceptional Scale Detail Fully Licensed by Dodge Made in the USA Fits 1/10 VTA Class Chassis' Specifications: Length: 18" (457mm) Width Front: 7.83" (199mm) Width Rear: 8.1" (205mm) Height: 4.25" (108mm) Wheelbase: 10.24" (260mm) Includes: Clear 1967 Dodge Dart Body Decal Sheet Spoiler Mounting Hardware Paint-then-peel Over Spray Film and Window Masks This product was added to our catalog on May 3, 2023

    Out of stock

    $37.99

  • PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am

    PROTOform PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am

    Out of stock

    PRM155240, 1971 Chevrolet Camaro Z28 Clear Body :VTA Class 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am Product Specifications Manufacturer # 1552-40 Body 1971 Camaro Z28 Material Polycarbonate Product Height 4.17" (106 mm) Product Length 17.25" (438 mm) Product Width 8.07" (205 mm) Refinement Color Clear Scale 1/10 Vehicle Type Touring Car Wheelbase 10.1" (257 mm)

    Out of stock

    $45.00

  • PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear) PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear)

    PROTOform PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear)

    3 in stock

    PRM155840, Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body (Clear) This is the Protoform 1968 Ford Mustang Vintage Trans-Am Racing Body. The Mustang nameplate has long been synonymous with American muscle car performance, and now Protoform is proud to add to their Vintage Trans-Am racing body lineup with our rendition of the 1968 Ford Mustang. From the signature fastback roofline, to the aggressive stance, to the hood and pillar vents, every detail of the iconic pony car has been captured for an exceptionally scale look. Once again we’ve used the latest molding technology to form this body from single piece of polycarbonate while still maintaining realistic front and rear undercuts. No more add-on front or rear clips to assemble. This officially-licensed product is meets all VTA Class rules and includes a detailed decal sheet, protective overspray film and window masks. This product was added to our catalog on May 3, 2023

    3 in stock

    $35.99

  • PRM152600, Protoform J71 Vintage Racing Body (Clear) PRM152600, Protoform J71 Vintage Racing Body (Clear)

    PROTOform PRM152600, Protoform J71 Vintage Racing Body (Clear)

    2 in stock

    PRM152600, Protoform J71 Vintage Racing Body (Clear) This is the Protoform J71 Clear Body, intended for use in the VTA class. The addition of the J71 to the VTA scene will add new excitement to an already diverse class of racing, and is guaranteed to shake things up! The J71 features all the unique styling cues of the original car, as well as a molded in rear spoiler. The front of the car features an add-on nose with air dam, and when mounted with shoo goo and 2mm screws it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is supplied with the body. This provides the user with a lightweight, durable .030 lexan body, which in turn aids the handling ability of any VTA chassis. The VTA class has proven that its here to stay, and the Protoform J71 will definitely make things more interesting. Features: Made from extremely durable .030 Lexan® material 200mm wide at the front and 210mm across the rear wheel openings Add-on front nose with air dam Paint then peel over spray film, sticker sheet, and window masks included Exceptional detail for the Vintage style we all enjoy Specifications: Length: 16.9" (429mm) Front Width: 7.9" (200mm) Rear Width: 8.3" (210mm) Height: 3.9" (110mm) Wheel Base: 10.2" (260mm) Includes: (1) Clear J71 body (2) Front Body Nose Piece (1) Mounting Hardware (1) Window Masks (1) Decal Sheet  This product was added to our catalog on May 3, 2023

    2 in stock

    $34.99

  • PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm) PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm)

    PROTOform PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm)

    Out of stock

    PRM157425, Protoform Chevrolet Corvette C8 Touring Car Body (Clear) (190mm) The Protoform Chevrolet Corvette C8 Touring Car Body is an officially-licensed body, developed for USGT class racing. All the exceptional details of its 1:1 counterpart including aggressive cab forward design, striking front splitter, and sculpted side doors and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette branded windshield headers, number plates, "Jake" skulls and USA flags. This C8 fits modern 190mm touring cars and is formed from high-quality polycarbonate with paint-then-peel overspray film. It also includes an add-on rear wing with the USGT-sanctioned 10mm trim height, wing buttons with mounting hardware and window masks. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.   Features: Incredible Scale Details Officially-licensed by General Motors® USGT Ready Made in the USA Fits 190mm TC Specifications: Length: 17.68" (449mm) Width: 7.6" (193mm) Wheelbase: 10.1" (257mm) Includes: Chevy® Corvette™ C8 Clear Body Wing Buttons Under-wing Nuts Extensive Decal Sheet Paint-then-peel Over Spray Film & Window Masks This product was added to our catalog on April 3, 2021

    Out of stock

    $41.99

  • PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body

    PROTOform PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body

    Out of stock

    PRM173300, 1/10 Outlaw Wing Kit for PRM158500 Pro-Mod Body

    Out of stock

    $36.24

  • PRM158800, PROTOform 1963 Chevrolet Corvette Stingray Pro Mod Clear Body: Drag Car PRM158800, PROTOform 1963 Chevrolet Corvette Stingray Pro Mod Clear Body: Drag Car

    PROTOform PRM158800, PROTOform 1963 Chevrolet Corvette Stingray Pro Mod Clear Body: Drag Car

    Out of stock

    PRM158800, PROTOform 1963 Chevrolet Corvette Stingray Pro Mod Clear Body: Drag Car One of the most iconic drag cars of yesteryear is now available for your No Prep RC Drag Car! PROTOform introduces the 1963 Chevy® Corvette Stingray™ Pro-Mod. This officially licensed body combines scale realism with a low-LCG aerodynamic upgrade to your 13.2" wheelbase No Prep Drag Car. We combined the signature "split-window", enlarged rear haunches and low-slung nose with some stretched, pro-mod drag racing proportions to transform your no-prep car into a scale-1/4-mile beast. The exaggerated ribs and front fenders create an extra stiff hood area to avoid folding down at high speeds. Due to the overall slammed design of the hood, this body will only fit the latest high-end No Prep racing models with low-profile front shock towers. The Stingray Pro Mod features a built-in spoiler, but for top-level Outlaw Class racers, we recommend pairing the Stingray™ with the upgrade Outlaw Wing Kit (PRM173400) for maximum stability and performance at blazing fast speeds. Just trim the rear spoiler lip off your Stingray™ and mount the wing on the conveniently marked dimples. The '63 Corvette Stingray™ Pro Mod body is Made in the USA from our crystal-clear polycarbonate and includes a detailed decal sheet and window masks. Give your SC drag car the most unique look at the strip with PROTOform's Corvette Stingray™ Pro Mod! This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product. PRM158800 | 1963 Chevrolet® Corvette Stingray™ Pro-Mod Clear Body for SC-Based No Prep Drag Cars with low-profile front shock towers Features Officially Licensed by GM State of the Art Aerodynamics Classic Pro-Mod Styling Add the PRM173400 Outlaw Wing (sold Separately) if Your Drag Car is Blazing Fast Paint-then-peel Overspray Film Built-in Made with Crystal Clear Polycarbonate Made in the USA, since 1982 Four Steps to Drag Ready Clean Body and apply included window mask Paint then peel the over-spray film off Sticker your body (decal sheet included) Mount your new body onto your chassis Fits 13.2" Wheelbase Drag Cars (SC Based) with low-profile front shock towers Specifications Body Style: 1963 Corvette Stingray Color: Clear Material: Polycarbonate  Product Height: 5.58" (142 mm) Product Length: 25" (635 mm) Product Width: 11.27" (286 mm) Scale: 1/10 Vehicle Type: Drag Car Wheelbase: 13.2" (335 mm) This product was added to our catalog on May 15, 2023

    Out of stock

    $46.99

  • PRM123830, 1/10 Nor’easter Clear Body: Dirt Oval Late Model

    PROTOform PRM123830, 1/10 Nor’easter Clear Body: Dirt Oval Late Model

    Out of stock

    OverviewThe PROTOform Nor'easter is an evolution of our race-winning line of race bodies for your 1/10 Dirt Oval Late Model.Using the latest in aerodynamic styling from full-scale late models, the Nor'easter has been refined to give you even more steering and side bite. Extra clearance has been added around the right front fender and the front splitter reconfigured to allow for more body lean. The side skirts have also been enhanced for more rigidity and stability.In its first ever race, PROTOform Team Driver and Nor'easter design consultant Matt Murphy drove the Nor'Easter to a convincing TQ and win at the West Coast Dirt Oval Nationals, proving the new body style an instant success.Made to fit all the popular dirt oval late model pan car chassis, the Nor'easter meets all Dirt Oval National Rulebook specs and comes with a pre-cut and pre-drilled spoiler kit complete with end plates and hardware. It's produced in genuine .030" polycarbonate and also includes a detailed decal sheet featuring 2 different sets of headlight and grille options, window masks, and paint-then-peel overspray film.This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.PRM123830 | Nor'easter Clear Body for Dirt Oval Late Model FeaturesEnhanced steering and downforceMore stability than other Dirt Oval Late Model bodiesMeets all DODC specsAerodynamic styling from full-scale late modelsFits all popular Dirt Oval Late Model ChassisPre-cut spoiler kit with end platesPaint-then-peel Overspray Film Built-inMade with Crystal Clear PolycarbonateMade in the USAFour Steps to Race ReadyClean Body and apply included window maskPaint then peel the over-spray film offSticker your body (decal sheet included)Mount your new body onto your CarFitsFits all popular Dirt Oval Late Model ChassisSpecsLength:21.5" (540mm)Width:10.0" (254mm)Height:4.375" (111mm):

    Out of stock

    $51.99

  • PRM122721, 1/10 ORT Truck Clear Body: Oval

    PROTOform PRM122721, 1/10 ORT Truck Clear Body: Oval

    Out of stock

    Overview The ORT incorporates styling cues and aerodynamic tricks from all of the four brands represented in the NCTS. From its molded-in front splitter to its add-on rear spoiler it's a serious race body. It features two sets of trim lines for both carpet/foam racing (4.5 inch min height) and outdoor-capped tire racing (4.75 inch min height). It comes with clear protective film, spoiler mounting hardware and window masks. The ORT decal sheet features optional headlight and grill styles as well as all the Craftsman Truck's body details. Early testing has proven that the PROTOform ORT performs as well as it looks. It turns in hard and comes off stable. It's been chosen as the official oval truck body for the popular Brushless Racing League's 13.5 Masters Class.Hey - we've all known for a long time that America loves trucks. R/C oval racers are just doing what comes natural. This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product. PRM122721 | ORT Truck Clear Body for Oval Features Superb molded in detail including rollbars Dual trim lines Made from .030 polycarbonate Paint-then-peel Overspray Film Built-in Made with Crystal Clear Polycarbonate Made in the USA Four Steps to Race Ready Clean Body and apply included window mask Paint then peel the over-spray film off Sticker your body (decal sheet included) Mount your new body onto your Car Fits Oval Chassis Specs Length: 17.6" (448mm) Width: 7.9" (200mm) Height: 4.7" (120mm) Wheelbase: 11.4" (290mm)

    Out of stock

    $33.99

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account