Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

NPRC Motors

32 products


  • TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil

    Trinity TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil

    Out of stock

    TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil Features: Ultra light ball bearing oil which also cleans the bearings of old oils when used Lower drag than Royal Oil Ideal for Certified Motor Bearings 1/2oz. needle tip bottle Excellent for all R/C wheel bearings especially 1/12th scale and slot car wheel bearings where less drag is essential

    Out of stock

    $10.99

  • HADMCL4047, XT60 Connectors (4) Female Only

    Maclan Racing HADMCL4047, XT60 Connectors (4) Female Only

    Out of stock

    HADMCL4047, XT60 Connectors (4) Female Only

    Out of stock

    $5.00

  • TRI4051, Royal Oil Super Light Weight Low Drag Oil

    Trinity TRI4051, Royal Oil Super Light Weight Low Drag Oil

    Out of stock

    TRI4051, Royal Oil Super Light Weight Low Drag Oil Royal oil is a lightweight oil blended for use in all brushless motor ball bearings and wheel bearings for offroad and on-road vehicles. Also excellent for toy axles and wheels like Hot Wheels. Features: Long lasting 1/2oz. needle bottle

    Out of stock

    $10.99

  • HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Maclan Racing HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Out of stock

    HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Out of stock

    $11.00

  • HADMCL4113, XT90 Connectors (4) Male Only

    Maclan Racing HADMCL4113, XT90 Connectors (4) Male Only

    10 in stock

    HADMCL4113, XT90 Connectors (4) Male Only

    10 in stock

    $6.00

  • HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Maclan Racing HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Out of stock

    HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Out of stock

    $11.00

  • HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Maclan Racing HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Out of stock

    HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Out of stock

    $6.00

  • TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • HADMCL4220, ESC Wireless Link

    Maclan Racing HADMCL4220, ESC Wireless Link

    2 in stock

    HADMCL4220, ESC Wireless Link The Maclan Racing Wireless Link is designed for transmitting data wirelessly between Maclan Racing ESC and mobile devices (Android OS with 5.0 or later, and iOS with 13 or later). With Maclan Racing Smart Link App, it allows ESC programming, firmware updating, and viewing data logs. Specifications Interface: micro USB connectorWiFi Protocol: IEEE802.11 b/g/nDimensions: 26x26x10mmWeight: 9g (with 10cm lead and micro USB connector)Supported OS: Android OS 5.0 or later, Apple iOS 13 or later

    2 in stock

    $59.99

  • FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER

    Fantom Racing FAN28500 - FACTS MACHINE v3 – BRUSHLESS ROTOR TESTER

    Out of stock

    Have you ever been at a race and wondered how the top finishers seem to have faster motors than everyone else? One of the reasons for this is because the fast guys know how to tune their motors with different rotors.  Most motor companies now offer optional tuning rotors, but without a way to measure their magnetic strength, there is no way for you to know what strength rotor you are putting in your motor and therefore no way to fine-tune your motor correctly.  In addition, rotors are not all created equal.  Due to tolerances in the manufacturing process, some are better than others and the fast guys have figured this out.  Tuning your motor with the correct rotor is the most critical step in getting the maximum performance out of your motor. Do you know that the strength of your rotor has the single biggest effect on how your motor runs, yet most racers don’t even know what strength rotor they have in their motor?  This is like not knowing whether you have a 4, 6 or 8 cylinder engine in your real car.  This basically leaves you guessing at how to gear your car and where to set the motor timing.  Furthermore, without the correct rotor in your motor, your motor may never run up to its full potential for the application that it is being used for. Now, with the new FACTS MACHINE v3 rotor tester, this easy to use tool gives you the ability to accurately test the magnetic field strength of all of your rotors! No more guessing…get the “FACTS” and the edge over your competition with the FACTS MACHINE v3 Brushless Rotor Tester! IMPORTANT: It is important to know that there is no standard in the R/C industry for testing brushless rotors.  There are numerous testers on the market, including the Trinity, MMS, and others, that all provide different information.  This information can vary greatly.  For example, one company’s meter may read 1500 for a rotor, where our meter may read it as 1400.  The Fantom Facts Machine v3 is not mass produced, but rather is hand-built one at a time, in the U.S.A., to the highest standards in the R/C industry.  Also, the Facts Machine v3 calibration is double-checked for the highest accuracy possible, so you can feel confident that we are providing you with the most precise rotor tester in R/C. FEATURES: Precision Calibrated – Accurately Measures Magnetic Field Strength Of Brushless Rotors Works With Most Brand 540 Size Rotors and All Diameters (maximum length of 1.54 inches / 39mm) Displays The Highest Measurement For Both Poles At The Same Time Until The Unit Is Reset (eliminates having to memorize or having to write down each number) Lighted LCD Display – Reads Out To 4 Numeric Places (example: 1550) AC Powered – Includes 6v Wall Power Supply Laser Engraved Fantom Logo RoHS Compliant – Built With All Lead-Free Components And Solder Comes in a sturdy, foam padded storage box Hand Built In The USA! SPECS: DIMENSIONS: 4.17″ (106mm) L x 1.58″ (40mm) W x 0.72″ (18.4mm) H (1.18″ / 30mm H including standoffs) WEIGHT: 2.23 ounces (63.22 grams) This product was added to our catalog on September 10, 2021

    Out of stock

    $179.99

  • FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER

    Fantom Racing FAN28501 - FACTS MACHINE 3S – BRUSHLESS MOTOR RESISTANCE / INDUCTANCE METER

    Out of stock

    Introducing our latest motor testing tool, the Facts Machine 3S Precision Resistance / Inductance Meter!  This incredible new tool allows you to test both the resistance and inductance of your brushless motor!  This information is critical in knowing the performance capability of your motors. Did you know that knowing the inductance of your motor is just as important as knowing the resistance? Yet most racers don’t pay much attention to this.  Most racers are only concerned with getting the lowest resistance stator they can find, however, this is only half the equation in finding the best stator possible.  Inductance also plays a very important role in your motor’s performance.  The general rule of thumb is the combination of the lowest resistance and highest inductance produces the highest performance for R/C motors and the difference between these two numbers we call the “spread”.  Typically, the bigger the spread, the better the motor will perform.  For example, using common 17.5 turn numbers of 18.0 milliohms as the resistance number and 30.0 milliHenries as the inductance number, this is a spread of 12.  If you could find another 17.5, for example, with a spread of 12.5, this motor will run better on the track compared to the motor with the spread of 12.  Not knowing the “spread” basically leaves you guessing at what motor is truly best in your box. In addition, the Fantom Facts Machine 3S is not mass produced, but rather is hand-built one at a time, in the U.S.A., to the highest standards in the R/C industry.  The Facts Machine 3S calibration is double-checked for the highest accuracy possible, using 5% tolerance resistors and inductors, referenced to our shop Instek GOM-802 milliohm meter and Duoyi inductance meter, so you can feel confident that we are providing you with the most precise stator tester in R/C.  To purchase an Instek GOM-802 and quality inductance meter costs over $500, so the Facts Machine 3S is an incredible value for all serious racers. Now, with the new FACTS MACHINE 3S Resistance / Inductance Meter, you can test the two most important factors of your stator with one compact and easy to use tool! No more guessing…get the “FACTS” and the edge over your competition with the FACTS MACHINE 3S Brushless Motor Resistance / Inductance Meter! FEATURES: Precision Calibrated Using an Instek GOM-802 milliohm Meter (same as ROAR uses) and a Duoyi DY-4070G Inductance Meter Resistance Range: 0 to 999 milliohms Inductance Range: 0 to .999 milliHenries Displays both Resistance and Inductance Numbers, of all 3 poles, at the same time until the unit is reset (eliminates having to memorize or having to write down each number) Lighted LCD Display High-quality Mueller® Gold-plated resistance clips and high-quality Kelvin inductance clips Capable of testing each pole individually or two poles at a time AC Powered – Includes 6v Wall Power Supply 3D Printed Case with Fantom Logo Comes in a sturdy, foam padded storage box Hand Built In The USA! SPECS: DIMENSIONS: 2.85″ (72mm) L x 1.58″ (40mm) W x 0.72″ (18.4mm) H (0.78″ / 20mm H including screen) WEIGHT: 2.45 ounces (69.46 grams) This product was added to our catalog on September 10, 2021

    Out of stock

    $199.99

  • FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN

    Fantom Racing FAN19233 - ICON V2 PRO DRAG MODIFIED MOTOR – 3.5 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 3.5 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Red Optional Stationary End Plate: Red Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

  • FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN

    Fantom Racing FAN19133F - ICON V3 PRO DRAG MODIFIED MOTOR – 3.0 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 3.0 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Green Optional Stationary End Plate: Green Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

  • TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor

    Trinity TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor

    Out of stock

    TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T) TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T)

    Trinity TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T)

    Out of stock

    TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T) This is the Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor. Using an updated stator design gives this motor more speed, durability and efficiency. Adding to this the highly CNC milled motor case reduces weight and allows heat to escape easily. With high quality construction, innovative internal components and looks that will make your friends envious, the Team Trinity Revtech "Slot Machine" motor is a must have.This Team Spec edition is in the top 5% of the batch of motors. Every team motor goes through rigorous inspection process and only the top 5% get to become Team Spec motors.Features: Updated 90 degree solder tabs  2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps  Infinite timing adjustment capabilities  Modular Design with whole-can length hardware and replaceable end caps  Updated stator design with an immense amount of low end torque without skimping on efficiency Reformulated thermal Epoxy for best in class thermal dissipation  Ultra-Rare Earth material magnets for heat resistance and longevity   Same proven sensor board as X-Factor Modified  Sealed bearings for durability and high performance  TRITEP1119 12.5x25.5mm Rotor Included!  Designed well within ROAR, EFRA, and BRCA standards  Team Spec Edition Features: Top 5% of all stators Marked Resistance numbers in the box Visually inspected for imperfections  Includes: (1) 21.5T Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (1) Sensor cable This product was added to our catalog on October 25, 2022.

    Out of stock

    $119.99

  • TRITEP2022, Slot Machine 17.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2022, Slot Machine 17.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • Sale -33% TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Trinity TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Out of stock

    TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Out of stock

    $199.99$134.39

  • Sale -33% TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Trinity TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Out of stock

    TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Out of stock

    $199.99$134.39

  • Sale -33% TRIDM25, Drag Master 2.5T Holeshot Brushless Motor

    Trinity TRIDM25, Drag Master 2.5T Holeshot Brushless Motor

    Out of stock

    TRIDM25, Drag Master 2.5T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery

    Out of stock

    $199.99$134.39

  • TRIDM20, Drag Master 2.0T Holeshot Brushless Motor

    Trinity TRIDM20, Drag Master 2.0T Holeshot Brushless Motor

    1 in stock

    TRIDM20, Drag Master 2.0T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000+Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery

    1 in stock

    $199.99

  • TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor

    Trinity TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor

    Out of stock

    TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRITEP2111, Double Down 6500KV 4 Pole Drag Motor

    Trinity TRITEP2111, Double Down 6500KV 4 Pole Drag Motor

    1 in stock

    Drag racing has proven to be one of the most demanding disciplines in the RC industry. With how powerful the cars are, some manufacturers are struggling to keep up with the demand of new parts and releases. Luckily for you, we at Team Trinity are staying at the forefront! Don't let that make you think they are rushing out products like their competitors though, with months of testing under their belts they are proud to bring the Double Down 4 Pole Drag Motor to market!The Double Down 4 Pole is a special design for drag racing. On each side of the stator are Gold and Black CNC endplates that not only look incredible but offer tons of space for airflow to get through. This design also allows for long, full length, screws that will keep the motor together even at the highest of vibrations. The stator uses a thermal epoxy to stay cool as well as strong. All this houses a rotor with special metal jacket for protection in the hardest of environments and an 1/8in shaft. The Double Down also uses their 90 degree solder tabs for easy soldering! When looking at the tabs you'll also notice that their 4-pole has adjustable timing options! Chances are if you're not running a Double Down, you're chasing one! Features:   90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Adjustable timing capabilities Modular Design with whole-can length hardware and replaceable end caps Reformulated thermal Epoxy for best in class thermal dissipation  

    1 in stock

    $159.99

  • TRITEP2021, Slot Machine 13.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2021, Slot Machine 13.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • PTK5038, 4.5mm Maxxcurrent XT90 Polarized Device and Battery Connectors (4 Males)

    ProTek RC PTK5038, 4.5mm Maxxcurrent XT90 Polarized Device and Battery Connectors (4 Males)

    11 in stock

    PTK5038, 4.5mm Maxxcurrent XT90 Polarized Device and Battery Connectors (4 Males)

    11 in stock

    $9.00

  • FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN

    Fantom Racing FAN19234F - ICON V2 PRO DRAG MODIFIED MOTOR – 4.0 TURN

    Out of stock

    (image is representative of the motor design, but not the wind of the motor) In The Box 4.0 Turn ICON v2 Pro Drag Modified Re-Shim Rotor: Teflon Timing Screw Options: Pro Titanium Bearing Options: Axon X10 Hybrid Bearings Rotor Options: 13.0 Rotor Strength Test: Yes Coil Resistance Test: Yes Optional Sensor Board Adjustment Plate: Orange Optional Stationary End Plate: Orange Designed in the USA, we are proud to announce the ALL NEW ICON V2 PRO MODIFIED SERIES RACING MOTORS for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the new ICON V2 Pro Mod is our “Patented” (U.S. Patent D823,803) designed stator.  Our patented design stator provides maximum torque while producing the most insane RPM ever seen before!  That’s correct, another first from Fantom!  With our unique design, we’ve totally eliminated the need for stator screws! Up your game and see for yourself why the all-new ICON V2 Pro Modified truly is a Game Changer!  Whether you race On-Road or Off-Road, 1S or 2S…..We’ve got you covered!! SPECS AND FEATURES: All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803) New Stator Design for Maximized Torque & Efficiency New Super High Strength and Heat Resistant Magnet Formula New Sensor Board Design for Improved Deviation Accuracy & Reliability Maximum Size Allowed, Pure Copper Wire for Lowest Resistance Possible Precision Machined 1-Piece Can Design High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring Venting & Can Designed to Maximize Heat Dissipation Premium Grade Kawasaki® Steel Stator Plates CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment Maximized Adjustable Timing High RPM Precision Bearings 13.0mm Hi-Torque Ultra Select Rotor Meets All BRCA, IFMAR, EFRA Specifications ROAR Approval Pending Patented Stator Design (U.S. Patent D823,803) THIS MOTOR INCLUDES THE FOLLOWING IN THE BASE PRICE: Professionally built to our strict standards, which includes the rotor properly shimmed (brass shims), complete evaluation of the coils, rotor strength and asymmetry and sensor board deviation.  The timing is also set to our recommended setting for your application All modified motors are guaranteed to meet our strict specifications, whether you choose the “Test Options” or not. IF YOU CHOOSE ANY OF THE OPTIONAL UPGRADE PARTS LISTED ABOVE, YOU WILL ALSO RECEIVE THE ORIGINAL STOCK PARTS.  THIS INCLUDES THE ROTOR, BEARINGS, STEEL SCREWS, SENSOR BOARD ADJUSTMENT PLATE, AND STATIONARY END PLATE. MOTOR STANDARD AND OPTIONS DETAILS: Re-Shim (standard brass shims) – Included in the price.  We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Rotor Re-Shim Option (TEFLON® shims) – As with the standard brass re-shim option above, we adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field.  With this option, we also use TEFLON® shims for the outermost shims, to minimize any side-load binding between the rotor and bearings.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly.  We also make sure that it has the correct end play, so that it is not bound up or too loose. Bearing Option – If you choose the AXON X10 hybrid bearings option, we make sure the bearings seats are sized correctly before installing the bearings.  This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentrical bearing movement.  If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearings correctly. Rotor Options – Choose the 13.0mm modified rotor at no extra cost, or choose the 13.5, 12.5, 12.3mm or 12.0mm optional modified rotor listed above.  There is an up-charge for the optional 13.5, 12.5, 12.3mm or 12.0mm modified rotor, but you will also receive the original 13.0mm rotor if you choose the “optional” 13.5, 12.5, 12.3mm or 12.0mm modified rotor.  All rotors are checked for correct bearing fit.  If required, the rotor shaft is polished to ensure that it fits the inner race of the bearing correctly. Pro Titanium Timing Adjustment Screws Option – Eliminates the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower!Increases RPM by 100+ RPM compared to the stock steel screws!Reduces weight by .26 grams compared to the stock steel screws! Rotor Strength Test Option – Your rotor is tested to make sure it meets proper specs.  If we find that the rotor does not meet our strict standards, we will replace it.  With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester.   If you choose the printout option, the rotor test results of your rotor are supplied with your motor.  If you choose an optional rotor, we will test both of your rotors.  All modified rotors are guaranteed to meet our strict specifications, even if you don’t choose the print option. Coil Resistance Test Option – Your stator is tested to make sure it meets proper specs.  With this test, we evaluate the ohms resistance of your stator to make sure it meets proper specs and to detect shorts.  Each coil is tested individually.  If we find that the stator does not meet our strict standards, we will replace it.  With this test, the stator coils are tested on an Instek GOM-804, which is the same as ROAR uses.  If you choose the printout option, the coil test results of your stator are supplied with your motor.  All modified stators are guaranteed to meet our strict specifications, even if you don’t choose the print option. Motor Evaluation Option – All modified motors are evaluated using the highly accurate Motolyser brushless motor tester.  This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy. If you choose the printout option, the test results of your motor are supplied with your motor. FEEL THE POWER…FEEL THE FANTOM This product was added to our catalog on September 10, 2021

    Out of stock

    $168.00

  • TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor

    Trinity TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor

    Out of stock

    TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor

    Trinity TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor

    Out of stock

    TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor Features: 10% Lighter than Previous Motors Weight (158g avg) New Sensor Board Design. 0 - 60 Degrees of Timing adjustment Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws X-Flow Cooling which pulls more air through the can, reducing motor temps 2pc CNC Machined Aluminum can allows for more accurate deviation reading NEW 90 Degree Solder Tabs The X-Factor Modified Series come assembled with TEP1151 Rotor.

    Out of stock

    $149.99

  • Sale -33% TRIDM40, Drag Master 4.0T Holeshot Brushless Motor

    Trinity TRIDM40, Drag Master 4.0T Holeshot Brushless Motor

    Out of stock

    TRIDM40, Drag Master 4.0T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring Cars Standard Race SPEC Features: Aluminum based sensor board for true sensor alignment Infinite Timing Adjustment 2mm Copper Tabs Thicker Pure Copper Solder Tabs and Collector Thermal Stator Coating for the best heat dissipation possible Turbine style vented nose More Vents for More Cooling 220C wire coating Certified Gauge High Temperature Wire Short Stack Stator Design Stator Material Grade 5 Ball Bearings Uses all D3.5, D4 and 24K Rotors 8150Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in KV's due to the fact that timing and voltage can effect the KV number. * MAX Voltage 11.1v 3 Cell Lipo Battery

    Out of stock

    $199.99$134.39

  • MOV40135, Motiv M-CODE "MC4" Pro Tuned Spec Brushless Motor (13.5T) MOV40135, Motiv M-CODE "MC4" Pro Tuned Spec Brushless Motor (13.5T)

    Motiv MOV40135, Motiv M-CODE "MC4" Pro Tuned Spec Brushless Motor (13.5T)

    Out of stock

    MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T) OVERVIEW This is the Motiv M-CODE "MC4" Pro Tuned 13.5 Turn Spec Brushless Motor. Every MOTIV Motor is hand checked, assembled and packaged by a professional in house at their WI, USA office. During this process, every motor component must meet MOTIV requirements before assembly and packaging. Included is a specification check list which is filled out on a motor to motor basis all through the testing and assembly process to ensure the quality of the finished product. Features: Stator: Specially selected stator material for low power loss High quality pure copper wire Emphasis on hand winding for consistency Solder Tabs: Gold plated pure copper tabs for low resistance Internal "Drop Connection" design to ensure low resistance and consistent internal solder joints Rotor: Sintered rotor High quality neodymium magnet material for lasting magnetism Can Assembly: High flow vent holes to allow air flow in and out for lower operating temps Machined all aluminum anodized can, front plate and end bell Infinitely adjustable timing Dual precision ball bearings Overall: Every motor tested in house during the assembly and packaging process Spec/test sheet provided uniquely for every motor to ensure quality Designed to comply with ROAR specifications Lightweight completed design Packaged in reusable cushioned storage container   This product was added to our catalog on August 10, 2021

    Out of stock

    $114.99

  • Motiv Flat Bonded Sensor Wire Motiv Flat Bonded Sensor Wire

    Motiv Motiv Flat Bonded Sensor Wire

    Out of stock

    MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T) OVERVIEW The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation. This product was added to our catalog on August 10, 2021

    Out of stock

    $7.49

  • MOV3005C, Motiv 30x30 High Voltage Carbon Edition Super Fan MOV3005C, Motiv 30x30 High Voltage Carbon Edition Super Fan

    Motiv MOV3005C, Motiv 30x30 High Voltage Carbon Edition Super Fan

    Out of stock

    MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T) OVERVIEW The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation. This product was added to our catalog on August 10, 2021

    Out of stock

    $27.99

  • MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T) MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)

    Motiv MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)

    Out of stock

    MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T) OVERVIEW The Motiv LAUNCH 2.0 Turn PRO Drag Racing Modified Brushless Motor is a 3 phase, 2 pole motor developed specifically for drag racing. Every MOTIV Motor is hand checked, assembled and packaged by a professional in house at their WI, USA office. During this process, every motor component must meet MOTIV requirements before assembly and packaging. Included is a specification check list which is filled out on a motor to motor basis all through the testing and assembly process to ensure the quality of the finished product. Features: Stator: Specially selected stator material for low power loss High quality pure copper wire Emphasis on hand winding for consistency Solder Tabs: Gold plated pure copper tabs for low resistance Internal "Drop Connection" design to ensure low resistance and consistent internal solder joints Rotor: Sintered rotor High quality neodymium magnet material for lasting magnetism Can Assembly: High flow vent holes to allow air flow in and out for lower operating temps Machined all aluminum anodized can, front plate and end bell Infinitely adjustable timing Dual precision ball bearings Overall: Every motor tested in house during the assembly and packaging process Spec/test sheet provided uniquely for every motor to ensure quality Designed to comply with ROAR specifications Lightweight completed design Packaged in reusable cushioned storage container This product was added to our catalog on August 10, 2021

    Out of stock

    $114.99

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account