Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

NPRC

152 products


  • TRA6852A, Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly TRA6852A, Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly

    Traxxas TRA6852A, Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly

    6 in stock

    TRA6852A, Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly Traxxas Rustler 4X4 Rear Extreme Heavy Duty Driveshaft Assembly. These are the replacement rear driveshaft assembly that can be installed on the right or left side of the chassis. Package includes one factory assembled, ready to install driveshaft, and one screw pin. This product was added to our catalog on May 31, 2021

    6 in stock

    $12.00

  • PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black

    Pro-Line PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black

    Out of stock

    PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black Fits: Losi® 22S™ No Prep Drag Car (LOS03035/LOS03041) Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) Slash® 2wd Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) AE DR10 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) Slash® 4x4 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) The Pro-Line Showtime Front Drag Racing Wheels with 12mm Hex are a performance driven wheel that will aid acceleration by removing some excess rotational mass. These wheels have been designed to be as narrow and lightweight as possible, all without taking away from the scale appearance. The outer bead is a standard 2.2", while the inner bead is a 2.7". When combined with the Pro-Line Front Runner Tires (PRO10197-203), expect nothing but performance and great scale looks. NOTE: Requires the use of the Pro-Line Front Runner Tires (PRO10197-203).Features: Scale Spoke Pattern Mimics Full-Size Drag Wheels Perfect fit for the Pro-Line's Front Runner Tires (PRO10197-203) Super Narrow and Lightweight Eliminates the Need for Tire Foam Made in the USA Specifications: Scale: 1/10 Wheel Type: Showtime Front Runner Wheel Position: Front Package Type: Wheels Only Track Surface: Drag Racing Wheel Hex Size: 12mm Outer Diameter: 2.2" (56 mm) Product Height: 3.04" (77 mm) Product Width: 0.55" (14 mm) Includes: (2) Showtime Front Runner Wheels This product was added to our catalog on July 4, 2021

    Out of stock

    $14.00

  • R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only) R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only)

    Futaba R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only)

    8 in stock

    R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only) The Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver is only compatible with Futaba T-FHSS telemetry compatible transmitters. The R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price. However, the two receivers differ in two fundamental areas: this R304SB-E is only intended for electric vehicles and features the benefit of having a non-exposed built-in antenna. The R304SB is compatible with electric/nitro/gas applications and the antenna is fully exposed. NOTE: The R304SB-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models. Not compatible with the Futaba FHSS, S-FHSS, FASSTest or FASST transmitters. Features:  T-FHSS System Telemetry Enabled 4-Channels Built-in Hidden Antenna Electric Vehicle Use Only Specifications: Futaba System: T-FHSS S.Bus2: Yes Channels: 4 Range: 70m (230ft) (at best conditions) Power Requirement Rated Voltage: 4.8-7.4V Usable Voltage: 3.5-8.4V Size: 1.38x0.91x0.33" (35.1x23.2x12.5mm) Weight: 0.23oz (6.7g) Number of Ports: 5 PWM Output: 4 SBUS Ports: 0 SBUS2 Ports: 1 FASST: No Telemetry: Yes (T-FHSS) S-FHSS: No High Speed: Yes High Voltage: Yes Connector: J (STND) Range: Only for Electric Powered Car Models NOTE: The R304SB-E receiver is recommended for electric powered models only. This is NOT compatible with nitro or gas powered models. Not compatible with the Futaba S-FHSS, FHSS, FASSTest or FASST transmitters. This product was added to our catalog on May 4, 2021

    8 in stock

    $69.99

  • PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3) PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3)

    Pro-Line PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3)

    Out of stock

    PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3) Pro-Line Hoosier Drag 2.2" Front Tires were specifically made for no-prep RC Drag racing! The Hoosier Drag Front tires not only look amazingly Scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound and fit 2.2" 2wd Buggy Front Wheels. The Hoosier Drag Front tire and every other tire that Pro-Line makes is proudly Made in the USA. Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier Drag Slick Rear Tires to Complete the Look Available in Soft S3 Compound or the More Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with 2WD Front Buggy Wheels Made in the USA, since 1982 Specifications: Height: 3.18" (81mm) Width: 1.05" (27mm) Includes: (2) Hoosier Drag Front 2.2" Tires  (2) Closed Cell Foam Inserts This product was added to our catalog on May 3, 2021

    Out of stock

    $25.00

  • RCSS89417381, ALL in 1 Dirt Defending Super Lube/Cleaner RCSS89417381, ALL in 1 Dirt Defending Super Lube/Cleaner

    RC Speed Secrets RCSS89417381, ALL in 1 Dirt Defending Super Lube/Cleaner

    Out of stock

    ALL in 1 Dirt Defending Super Lube/Cleaner. Features: It cleans while it lubes. We've added our proprietary cleaning agent that agitates dirt inside the bearing when applied and ejects dirt while in motion. Centrifugal force. The more it turns the more it cleans and ejects contaminants versus most rc lubricants that only attract contaminants being topical versus a penetrant. Like alcohol it evaporates. Therefore not attracting dirt/dust into a wet bearing thus requiring a lot less maintenance and better performance/durability over time. It penetrates. Rather than living on top, our formula actually penetrates metals and creates a non-stick surface while conditioning the metal itself. Repels water. (when you combine with our RCSS STAINLESS Hybrid Ceramic Bearing kits and our Super-Lube's water resistance principles, you can be confident that your bearings will not rust from non-operation, mister systems, or over watered tracks. Stainless does not rust or corrode and our lube repels water. VERY user friendly applicator. Includes a Fine tip 45 degree bent tip for laser sharp accuracy. Travel Cap. We include a convenient travel cap to use when stored or traveling. Results are a cleaner, faster, more consistent, more durable longer lasting bearing It's an Anti-seize as well Viscosity thinner than water to easily reach behind your bearing seals/shields Use it on anything needing lubrication even around the house in place of WD40 type products. You'll be amazed. Includes: Qty (1) Bottle of RCSS Bearing Lube-Cleaner Qty (1) Applicator with Fine 45 degree bent tip for precise laser sharp accuracy. QTY (1) Travel cap  Notes: Due to the evaporative nature of our Super-Lube the travel cap must be used when stored. Use the resealable bag provided to keep all components neatly stored. Our lube helps to minimize maintenance, not eliminate it entirely. For best bearing performance, use lube on all reachable bearings every track day before you run, We recommend removing and cleaning all bearings with a citrus based degreaser once every 6-8 weeks depending on how much you run. This product was added to our catalog on October 9, 2021

    Out of stock

    $13.99

  • ASC9654, Team Associated 48P Spur Gear (87T) ASC9654, Team Associated 48P Spur Gear (87T)

    Team Associated ASC9654, Team Associated 48P Spur Gear (87T)

    3 in stock

    ASC9654, Team Associated 48P Spur Gear (87T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2021

    3 in stock

    $6.00

  • Sale -40% LOS03034, 1972 Chevy C10 Pickup Truck, 1/10 AWD V100 RTR LOS03034, 1972 Chevy C10 Pickup Truck, 1/10 AWD V100 RTR

    Losi LOS03034, 1972 Chevy C10 Pickup Truck, 1/10 AWD V100 RTR

    Out of stock

    LOS03034, 1972 Chevy C10 Pickup Truck, 1/10 AWD V100 RTR 1/10 1972 Chevy C10 Pickup Truck V100 AWD RTR Product Specifications Ball Bearings Complete Drivetrain Battery Sold Separately Body Polycarbonate, Hand Painted, 1mm Charger Sold Separately Chassis Injection Molded Completion Level Ready-To-Run Differential Bevel Gear Drivetrain AWD Drive Type Forward/Brake/Reverse Final Drive Ratio 2:66:1 Power Type Electric Gear Pitch 48-pitch Ground Clearance .25" (6mm) Inner Tire / Outer Wheel Diameter 2.1 in Internal Gear Ratio 3:5:1 Motor Size 540 Motor Type Brushed Pinion 22T Product Weight 3lbs 14oz. Radio Included Receiver Included Scale 1/10 Servos Included Shock Type Injection Molded Friction Speed Control Included Spur Gear 77 Tooth Suspension Independent Tire Compound S Compound Tire Tread V1 Performance Vehicle Type Touring Car Water-Resistant Yes Wheelbase 10.08" (256 mm) Wheel Width Front 1.02", Rear 1.18"

    Out of stock

    $249.99$149.99

  • ASC9653, Team Associated 48P Spur Gear (81T) ASC9653, Team Associated 48P Spur Gear (81T)

    Associated Electrics ASC9653, Team Associated 48P Spur Gear (81T)

    1 in stock

    ASC9653, Team Associated 48P Spur Gear (81T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2022

    1 in stock

    $6.00

  • TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil

    Trinity TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil

    Out of stock

    TRI5010, Perpetual Motion Ultra Lite Ball Bearing Oil Features: Ultra light ball bearing oil which also cleans the bearings of old oils when used Lower drag than Royal Oil Ideal for Certified Motor Bearings 1/2oz. needle tip bottle Excellent for all R/C wheel bearings especially 1/12th scale and slot car wheel bearings where less drag is essential

    Out of stock

    $10.99

  • TRA2750R, Traxxas Rear Suspension Arm Set (Long) TRA2750R, Traxxas Rear Suspension Arm Set (Long)

    Traxxas TRA2750R, Traxxas Rear Suspension Arm Set (Long)

    3 in stock

    TRA2750R, Traxxas Rear Suspension Arm Set (Long) This product was added to our catalog on September 7, 2021

    3 in stock

    $11.00

  • LOS232071, CVA Driveshaft Set, Complete: 22S Drag LOS232071, CVA Driveshaft Set, Complete: 22S Drag

    LOSI LOS232071, CVA Driveshaft Set, Complete: 22S Drag

    Out of stock

    LOS232071, CVA Driveshaft Set, Complete: 22S Drag

    Out of stock

    $29.99

  • Futaba, R334SBS, (SR/T-FHSS/S.Bus2)

    Futaba Futaba, R334SBS, (SR/T-FHSS/S.Bus2)

    Out of stock

    R334SBS – Super Response T-FHSS Telemetry 4-Channel ReceiverHigh Speed Response System For Surface Models (01102246-3) T-FHSS SRSIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V COMPATIBLE WITH THE T-FHSS/T-FHSS SYSTEM TRANSMITTERS.WHEN USING THE T-FHSS SR MODE, USE AN SR MODE SERVO. NORMAL SERVOS CANNOT BE USED. THE USE OF NORMAL SERVOS MAY CAUSE SERVO TROUBLE.  

    Out of stock

    $99.99

  • Sale -17% PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Pro-Line PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Out of stock

    PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car Fits: Losi® 22S™ No Prep Drag Car (LOS03035 & LOS03041) Slash® 2wd Drag Car AE DR10

    Out of stock

    $64.99$54.00

  • SWP-442525, Sweep Max Forward Mounted 1/8 Drag Race & Speed Run Foam Tire (Black) (2) (Soft) w/17mm Hex SWP-442525, Sweep Max Forward Mounted 1/8 Drag Race & Speed Run Foam Tire (Black) (2) (Soft) w/17mm Hex

    Sweep Racing SWP-442525, Sweep Max Forward Mounted 1/8 Drag Race & Speed Run Foam Tire (Black) (2) (Soft) w/17mm Hex

    Out of stock

    SWP-442525, Sweep Max Forward Mounted 1/8 Drag Race & Speed Run Foam Tire (Black) (2) (Soft) w/17mm Hex Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package. Features: MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing. Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction. Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing. Finished product: MAXIMUM grip, LONGER LIFE TIRES! Race at your own risk! Compound Applications: X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS HARD: Recommended for 85F or higher MEDIUM: Recommended for 70deg-90deg F SOFT: Recommended for temps below 70deg, or when maximum grip is desired Specifications: Weight: 80-86 grams (approx.) Diameter: 105mm Width: 45mm Application: 1/8 drag racing & speed run This product was added to our catalog on March 12, 2021

    Out of stock

    $38.00

  • ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

    Associated Electrics ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

    Out of stock

    ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.  These small outside diameter shims, common for on-road, are now available separately. Great for all 1/10 scale vehicles.  This product was added to our catalog on April 28, 2021

    Out of stock

    $9.99

  • HADMCL4047, XT60 Connectors (4) Female Only

    Maclan Racing HADMCL4047, XT60 Connectors (4) Female Only

    Out of stock

    HADMCL4047, XT60 Connectors (4) Female Only

    Out of stock

    $5.00

  • TRIREV2034-5, 2S 7.4V 4000MAH 110C 220C Burst LiPo Drag Racing Battery Pack, No Plug

    Trinity TRIREV2034-5, 2S 7.4V 4000MAH 110C 220C Burst LiPo Drag Racing Battery Pack, No Plug

    1 in stock

    TRIREV2034-5, 2S 7.4V 4000MAH 110C 220C Burst LiPo Drag Racing Battery Pack, No PlugEach Revtech Drag Racing LiPo battery is produced with higher grade safer materials, which results in longer battery life. The new assembly technology limits "cell puffing" resulting in a more durable and impact resistant battery.POWER Yourself to the Next Level with a Revtech LiPo Pack! Battery Size: 2 Cell Small Soft Pack Weight 208g avg 8 Gauge Wire Balance Connector: XH Number of Cells: 2 Dimensions (LxWxH) (mm): 92x44x23mm Maximum Charge Rate: 1C = 4amps Continuous Discharge "C" : 110C, 220C Burst Watt Hour @7.4V: 29.60wh

    1 in stock

    $119.99

  • PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    PROTOform PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    $46.99

  • ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead

    Associated Electrics ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead

    1 in stock

    ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead This product was added to our catalog on December 16, 2021

    1 in stock

    $26.99

  • Sale -20% TRIREV2038-5, Revtech, 2S 6400mah 7.4V True 200C Eliminator LiPo Drag Pack Battery, w/ Xt90 Connector TRIREV2038-5, Revtech, 2S 6400mah 7.4V True 200C Eliminator LiPo Drag Pack Battery, w/ Xt90 Connector

    Trinity TRIREV2038-5, Revtech, 2S 6400mah 7.4V True 200C Eliminator LiPo Drag Pack Battery, w/ Xt90 Connector

    Out of stock

    TRIREV2038-5, Revtech, 2S 6400mah 7.4V True 200C Eliminator LiPo Drag Pack Battery, w/ Xt90 Connector Each Revtech Drag Racing LiPo battery is produced with higher grade safer materials, which results in longer battery life. The new assembly technology limits "cell puffing" resulting in a more durable and impact resistant battery. Voltage: 7.4v Capacity @7.4V: 6400mah Connector Type: No Plug (8 Gauge Wire) Dimensions (LxWxH) (mm): 66x35x87mm Continuous Discharge "C": True 200c Watt Hour @7.4V: 47.36wh Item Added To Our Catalog: 09/13/2021

    Out of stock

    $199.99$159.00

  • 444025, Sweep MAX FORWARD X-HARD FOAM TIRES for GT8 17mm HEX 2pcs set 444025, Sweep MAX FORWARD X-HARD FOAM TIRES for GT8 17mm HEX 2pcs set

    Sweep Racing 444025, Sweep MAX FORWARD X-HARD FOAM TIRES for GT8 17mm HEX 2pcs set

    Out of stock

    Sweep Max Forward 17mm Hex 1/8 Mounted GT Foam Tires have been specially developed for 1/8 scale drag racing and speed run applications. These pre-mounts feature a specially designed wheel, and high density foam that have been bonded using a proprietary process that eliminates the need for further balancing. This creates a tire that is perfectly trued, and perfectly balanced, so they are ready to rip right out of the package.Features: MAX-FLAT Wheels: This wheel is specially made ONLY for Drag racing/Speed runs. This is not an off-road buggy wheel that will squat at the launch and wobble at the finish line. Flat face 17mm hex wheel with a 1mm edge that protects tires while side by side racing. Foam: Made out of race proven high density foams, that is long lasting and durable yet provides high traction. Gluing/Mounting Process: Each wheel and tire is mounted on a special machine, and have been sanded and trued to perfection by people with decades of experience in foam tires fabricating. Requires no further balancing. Finished product: MAXIMUM grip, LONGER LIFE TIRES! Race at your own risk! Compound Applications: X-HARD: Recommended for 90deg F to hotter, or SPEED RUNS HARD: Recommended for 85F or higher MEDIUM: Recommended for 70deg-90deg F SOFT: Recommended for temps below 70deg, or when maximum grip is desired Specifications:Weight: 80-86 grams (approx.)Diameter: 105mmWidth: 45mmApplication: 1/8 drag racing & speed run

    Out of stock

    $39.50

  • ASC91466, Team Associated Diff & Idler Gear Set ASC91466, Team Associated Diff & Idler Gear Set

    Associated Electrics ASC91466, Team Associated Diff & Idler Gear Set

    4 in stock

    ASC91466, Team Associated Diff & Idler Gear Set Team Associated Diff & Idler Gear Set. Package includes replacement gear diff case, and idler gear.  This product was added to our catalog on April 26, 2021

    4 in stock

    $17.99

  • EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash

    Exotek EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash

    Out of stock

    EXO1978, Carbon Fiber Adjustable Wheelie Bar Set, Single Wheel, fits Slash Extra long adjustable carbon fiber wheelie bar for 2wd Slash or Bandit 2wd street eliminator cars. Extends from 9.5" to 12.5" (axle to axle) to match NPRC race class rules. The longer bar gives you more stability, for straighter and faster passes without needing to let off the throttle as often. You are able to finely adjust the wheel height via the 4mm turnbuckle or make large adjustments by adding spacers under the wheel (M3 spacers not included). Made of heavy duty 3mm carbon fiber with alloy turnbuckles and mounts and includes a ball raced machined alloy wheel with oversized rubber o-ring tire.

    Out of stock

    $59.99

  • SPMXCA316, Adapter: IC3 Battery / 5mm Bullet 2' Smart 2S

    Spektrum SPMXCA316, Adapter: IC3 Battery / 5mm Bullet 2' Smart 2S

    Out of stock

    SPMXCA316, Adapter: IC3 Battery / 5mm Bullet 2' Smart 2S

    Out of stock

    $13.99

  • TRI4051, Royal Oil Super Light Weight Low Drag Oil

    Trinity TRI4051, Royal Oil Super Light Weight Low Drag Oil

    Out of stock

    TRI4051, Royal Oil Super Light Weight Low Drag Oil Royal oil is a lightweight oil blended for use in all brushless motor ball bearings and wheel bearings for offroad and on-road vehicles. Also excellent for toy axles and wheels like Hot Wheels. Features: Long lasting 1/2oz. needle bottle

    Out of stock

    $10.99

  • HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Maclan Racing HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Out of stock

    HADMCL4157, EC5 Connectors (2 Female + 2 Male)

    Out of stock

    $11.00

  • JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    JConcepts JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    1 in stock

    JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    1 in stock

    $60.00

  • PRO357300, 1967 Ford Mustang Clear Body for SC Drag Car PRO357300, 1967 Ford Mustang Clear Body for SC Drag Car

    Pro-Line PRO357300, 1967 Ford Mustang Clear Body for SC Drag Car

    Out of stock

    PRO357300, 1967 Ford Mustang Clear Body for SC Drag Car Fits: Losi® 22S™ No Prep Drag Car Slash® 2WD Modified into a narrow Pro-Mod Drag Car AE DR10

    Out of stock

    $54.00

  • HADMCL4113, XT90 Connectors (4) Male Only

    Maclan Racing HADMCL4113, XT90 Connectors (4) Male Only

    10 in stock

    HADMCL4113, XT90 Connectors (4) Male Only

    10 in stock

    $6.00

  • HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car

    Hot Racing HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car

    3 in stock

    HRADRL30VM01, Vertical Shock Mounts with Standoff: Losi Drag Car The Hot Racing Losi 22S Drag Vertical Shock Mounts are a tuning option that alters the shock geometry, placing the shocks in a more vertical position to improve rear weight transfer at launch. Package includes one vertical shock mount, two standoffs and hardware. Features: CNC machined aluminum Vertical Shock Mounts anodized black Three shock mounting locations expands suspension tuning options Stronger and more rigid than stock shock mount Stainless Shock stand offs This product was added to our catalog on September 27, 2021

    3 in stock

    $25.99

  • 7PXR US Limited Edition - R334SBS (01004407-3)

    Futaba 7PXR US Limited Edition - R334SBS (01004407-3)

    Out of stock

    7PXR US Limited Edition Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004407-3) (01004406-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V

    Out of stock

    $699.99

  • HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Maclan Racing HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Out of stock

    HADMCL4269, XT90 Connectors, Black, w/ 3 Female + 3 Male Plugs

    Out of stock

    $11.00

  • HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo

    Futaba HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo

    Out of stock

    HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo High Performance Servo with Brushless Motor (01102321-3) FEATURES:– Suitable for RC cars 1/10 scale on/off road and drifting.– Programmable/HV Brushless Servo.– Custom New high power Brushless Motor.– Supports SR mode with T7PX.– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Upper/middle/bottom: Aluminum Case Speed:0.07sec/60°(7.4V) / 0.08sec/60°(6.0V) Torque:30.0kgf・cm(7.4V) / 23.0kgf・cm(6.0V) Dimensions/Weight:40.5×21.0×26.2mm/54g RATED VOLTAGE:DC 6.0V-7.4V OPERATING VOLTAGE:DC 4.8-8.4V ONLY FOR RC CARS SMALLER THAN 1/5 SCALE

    Out of stock

    $259.99

  • 7PXR - R334SBS (#01004395-3) - Transmitter Systems, Surface Systems 7PXR - R334SBS (#01004395-3) - Transmitter Systems, Surface Systems

    Futaba 7PXR - R334SBS (#01004395-3) - Transmitter Systems, Surface Systems

    Out of stock

    7PXR Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004395-3) (01004396-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V

    Out of stock

    $699.99

  • 91609, FT Clamping Wheel Hexes, 5.0 mm offset

    Associated Electrics 91609, FT Clamping Wheel Hexes, 5.0 mm offset

    7 in stock

    91609, FT Clamping Wheel Hexes, 5.0 mm offset

    7 in stock

    $16.00

  • 91047, Heavy-duty Ballstuds, 6 mm, long neck

    Associated Electrics 91047, Heavy-duty Ballstuds, 6 mm, long neck

    1 in stock

    91047, Heavy-duty Ballstuds, 6 mm, long neck

    1 in stock

    $15.99

  • PRO10153-02, Pro-Line Hoosier G60 SC 2.2/3.0" Dirt Oval SC Mod Tires (2) (M4) PRO10153-02, Pro-Line Hoosier G60 SC 2.2/3.0" Dirt Oval SC Mod Tires (2) (M4)

    Pro-Line PRO10153-02, Pro-Line Hoosier G60 SC 2.2/3.0" Dirt Oval SC Mod Tires (2) (M4)

    13 in stock

    PRO10153-02, Pro-Line Hoosier G60 SC 2.2/3.0" Dirt Oval SC Mod Tires (2) (M4) Pro-Line Hoosier G60 SC 2.2/3.0" Dirt Oval SC Mod Tires were specifically made for Dirt Oval racing! The Hoosier G60 SC tread pattern not only looks amazingly Scale but the tire also offers the same High-Performance as the full-size tires, so you can have realistic style and performance on your SC Mod. And just like the full-size Hoosier tires, these G60 SC tires proudly display White Hoosier Logos on the sidewall! To make it easy on race technical inspection during spec races, Pro-Line has molded in Compound Identifiers into the Sidewall of each tire.The Hoosier G60 SC features rounded side tread for consistent slide action that will not catch ruts and flip your truck when you throw it up into the corner. The Hoosier G60 tread pattern creates great forward grip combined with long lasting and consistent performance that is easy on your pocket book. The Hoosier G60 SC and every other tire that Pro-Line makes is proudly Made in the USA!Features: Officially Licensed Hoosier G60 Tread Design White Hoosier Logos Proudly Displayed on Sidewall Molded Sidewall Compound Identifiers Exact Scale Detail Specifically Made for Dirt Oval Rounded Side Tread for Consistent Slide Action Great Forward Grip with Consistent Performance Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels Made in the USA, since 1982 Specifications:Height: 4.20" (107mm)Width: 1.81" (46mm)Includes: (2) Hoosier G60 SC 2.2"/3.0" Tires (2) Closed Cell Foam Inserts This product was added to our catalog on June 12, 2023

    13 in stock

    $32.99

  • Sale -20% PRO357900, 1/10 1999 Ford Mustang Clr Bdy: Drag Car

    Pro-Line PRO357900, 1/10 1999 Ford Mustang Clr Bdy: Drag Car

    2 in stock

    PRO357900, 1/10 1999 Ford Mustang Clr Bdy: Drag Car

    2 in stock

    $64.99$51.99

  • UBA0135, 2100 mAh LiFe Transmitter Battery (2-Cell)

    Futaba UBA0135, 2100 mAh LiFe Transmitter Battery (2-Cell)

    Out of stock

    UBA0135, 2100 mAh LiFe Transmitter Battery (2-Cell)

    Out of stock

    $89.99

  • Sale -11% PRO356400, 1985 Chevrolet Camaro IROC-Z Clear Body Slash Drag PRO356400, 1985 Chevrolet Camaro IROC-Z Clear Body Slash Drag

    Pro-Line PRO356400, 1985 Chevrolet Camaro IROC-Z Clear Body Slash Drag

    Out of stock

    PRO356400, 1985 Chevrolet Camaro IROC-Z Clear Body Slash Drag The Pro-Line Clear 1985 Chevrolet Camaro IROC-Z No Prep Drag Racing Body is a clear body that allows you to design and paint your own iconic 1985 Chevy Camaro. This IROC-Z body is specifically designed for the growing No-Prep SC Drag Racing scene. Bowtie fans can now recreate a piece of American nostalgia with this ultra-scale '80s sports coupe drag body. Transform your Slash 2wd or AE DR10 into a scale 1/4-mile beast in retro-classic F-body style Pro-Line offers a range of tires and wheels to finish the look, with Hoosier 2.2" Drag Racing Tires that fit the front, Hoosier Drag Slick SC 2.2"/3.0" Drag Racing Tires or Reaction HP SC 2.2"/3.0" Belted Tires in the rear, Pomona Drag Spec Wheels, and the Stinger Wheelie Bar can complete the ultimate hot-rod look. Fits: Losi® 22S™ No Prep Drag Car Slash® 2wd Drag Car AE DR10

    Out of stock

    $58.74$52.00

  • HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Maclan Racing HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Out of stock

    HADMCL4267, XT90 Connectors, Black, w/ 4 Male Plugs

    Out of stock

    $6.00

  • Futaba, 4PM (#01004387-3) - Transmitter Systems, Surface Systems Futaba, 4PM (#01004387-3) - Transmitter Systems, Surface Systems

    Futaba Futaba, 4PM (#01004387-3) - Transmitter Systems, Surface Systems

    Out of stock

    Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R334SBS Receiver Futaba R334SBS TFHSS SR S.Bus2 HV 4-Channel 2.4GHz Receiver DESCRIPTION 4PM Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004387-3) (01004388-3) (01004397-3) FEATURES T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM:By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver. TELEMETRY SYSTEM:The T4PM transmitter has adopted the newly developed bidirectional communication system “T-FHSS”. 2.4 GHZ SS RADIO COMMUNICATION SYSTEM:Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems. MODEL MEMORY FOR 40 MODELS:Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. 4 AXIS JOG BUTTON:The (JOG) button can be operated in 4 directions: up, down, left, and right. ESC-LINK FUNCTION (MC-LINK):This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. BRAKE MIXING FOR LARGE CARS (BRAKE):Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. GYRO MIXING (GYRO MIX):The sensitivity of Futaba car rate gyros can be adjusted from the T4PM. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):ESCs at the front and rear are controlled independently. CPS-1 MIXING (CPS MIX):LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. ANTI-SKID BRAKING SYSTEM (TH A.B.S):This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners. THROTTLE ACCELERATION (ACCEL):Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag. THROTTLE SPEED (SPEED):Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED (SPEED):When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. RACING TIMER (TIMER):The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided. FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. TRIGGER POSITION CAN BE CHANGED:The position of the throttle trigger can be moved forward and backward. TENSION ADJUSTMENT FUNCTION:The tension of the steering wheel and throttle trigger springs can be adjusted from the outside. MECHANICAL ATL ADJUSTMENT:Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger. CONTENTS YOUR T4PM INCLUDES THE FOLLOWING COMPONENTS: -T4PM Transmitter -R304SB OR R334SBS OR NO receiver -Dry Battery Holder -Mini Screwdriver TRANSMITTER SPECS T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS COMMUNICATION METHOD:One-way operating system MAXIMUM OPERATING RANGE:100m (Except the MINIT system) (Optimum condition) FOR SAFETY:F/S, B-F/S, ID TRANSMITTER FREQUENCY:2.4 GHz band RF POWER OUTPUT:100mW EIRP POWER REQUIREMENT:(Dry Cell Battery) Penlight x 3 (4.5 V) CURRENT DRAIN:150 mA or less TRANSMISSION ANTENNA:1/2λ di-pole RECEIVER SPECS R304SB T-FHSS SIZE:35.1 mm x 23.2 mm x 8.5 mm WEIGHT:6.6 g OPERATING VOLTAGE:DC 4.8V-7.4V R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V

    Out of stock

    $239.99

  • TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • ETK2024, 22S Drag Motor Plate, Slotted Lightweight

    Exotek ETK2024, 22S Drag Motor Plate, Slotted Lightweight

    Out of stock

    ETK2024, 22S Drag Motor Plate, Slotted Lightweight

    Out of stock

    $15.95

  • PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am

    PROTOform PRM155240, 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am

    Out of stock

    PRM155240, 1971 Chevrolet Camaro Z28 Clear Body :VTA Class 1/10 1971 Chevrolet Camaro Z28 Clear Body: Vintage Trans-Am Product Specifications Manufacturer # 1552-40 Body 1971 Camaro Z28 Material Polycarbonate Product Height 4.17" (106 mm) Product Length 17.25" (438 mm) Product Width 8.07" (205 mm) Refinement Color Clear Scale 1/10 Vehicle Type Touring Car Wheelbase 10.1" (257 mm)

    Out of stock

    $45.00

  • JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    JConcepts JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    2 in stock

    JCO0418, JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) The JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body is a great way to add customization and a personalized flair to your Street Eliminator set-up. The ATS-V is Cadillac's vigorous, brawny contender, eager to represent against all other performance rides. JConcepts took on recommendations from racers and dove into a project utilizing the coupe style vehicle for the drag racing community. The Cadillac features a V-forged front-end with details chiseled into the headlight area which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recess vents. The included front hood-scoop brings a drag racing flair and blends up to the gradually shaped windshield. The roof is slightly railed, channeling the air over the rear-end and coupe section down to the trunk-lid. Fender flares protrude from the main body shape blend into the railed and splitter along the rocker-panels. The rear trunk cover fits and flows around the back to a recessed center section and allows perfect positioning of the rear taillights. The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included to bring out another side to the Cadillac which is a drag racing animal. Included in each body set, a 2019 Cadillac ATS-V decal sheet and the paint mask for all windows. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: 2019 Cadillac ATS-V faithful representation Direct fit for Team Associated DR10 Sized for an assortment of SCT length trucks with width modifications Rear trunk deck spoiler with lower support structure Decal sheet with Cadillac and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Wheelbase: 13.00" Inside Dimensions:  Front: 11.50"  Rear: 12.00” This product was added to our catalog on December 16, 2021

    2 in stock

    $60.00

  • SPTST3678WGM, Aluminum Adjustable Wheelie Bar Kit, for Traxxas Slash 2WD LCG / Rustler / Bandit, Gun Metal

    ST Racing Concepts SPTST3678WGM, Aluminum Adjustable Wheelie Bar Kit, for Traxxas Slash 2WD LCG / Rustler / Bandit, Gun Metal

    Out of stock

    SPTST3678WGMAluminum Adjustable Wheelie Bar Kit, for Traxxas Slash 2WD LCG / Rustler / Bandit, Gun Metal ST Racing's CNC Machined aluminum wheelie bar kit features 7" in length with an adjustable angle, double or single wheel setup options, and a solid aluminum ladder frame construction. The wheels are high quality bearings for smooth rotation and low drag. Compatible on Slash 2WD, Drag Slash, Rustler, and Bandit. The preferred application would be the Slash 2WD LCG (Low Center Gravity) chassis trucks.

    Out of stock

    $43.00

  • TRI6684, Tweak Traction Conditioner, for Rubber and Foam Tires

    Trinity TRI6684, Tweak Traction Conditioner, for Rubber and Foam Tires

    Out of stock

    Tire tweak is the most popular tire conditioner for both R/C and slot car foam tires. Rub into tires the night before a race and let air dry. If damp the next morning, wipe off with dry rag before venturing out on the track. Tire tweak doesn't soften your tires, but it restores the natural chemical grip of the tire. Increased traction without accelerating tire wear. Quicker lap times because of greater cornering speed without bogging on the straightaways. Features: 4oz. dauber top bottle Increases chemical grip of the tire by putting natural oils back into the tire Works on Rubber and Foam Tires Odorless, No strong chemical smell

    Out of stock

    $10.99


You have seen 48 out of 152 products

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account