RaceDayQuads
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads AMASS XT150 w/ 6mm Gold Connector (1PC) - Choose Your Version & Color
These XT150 connector sets are ideal for large batteries, ESC, or motors! The durable nylon material is less likely to experience damage than other connectors and works well with up to 150 amps of current. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Features Nylon material holds 150A current for extended periods without exceeding 80 Degrees. Male connectors use a collet-style spliced contact area. Dovetail linking. Easy to solder. Specifications Max Amps: 150 Diameter: 6mm Connection Type: Male or Female Includes 1x AMASS XT150 w/ 6mm Gold Connector - Choose Version & Color
$0.90
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads Armattan Odonata 1.6" Micro Frame Kit
Introducing the Armattan Odonata, the smallest FPV frame we have ever produced. But do not let the small size fool you. This model was designed and put through testing phases by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. We figured it was best to let him describe this frame so here's what he has to say about it. The Odonata is a nano drone that fits in your pocket, rips like a boss, and hums like a dragonfly (true to its namesake). Fits through the tiniest of gaps, and makes worlds out of small spots. 1.5mm thick carbon fiber plates make for great durability, and the custom delrin standoffs are almost half the density of the standard aluminum ones (while retaining the needed strength), making the Odonata one of the lightest frames on the market, in a class where weight is the #1 priority. Fully thought out, the Odonata offers proper motor protection, camera protection, and build durability. A top mounted battery makes for easy access, and optimal flight characteristics. The Odonata captures the essence of whoops and boosts their performance, durability, and ease of use. With a nearly identical wheelbase, the Odonata has a not-so-identical amount of performance, versatility and fun, however. It's a better flyer. For those of you who can print your own parts, you can find the .stl files here. Check out our other Micro frames, as well as the rest of our Armattan selection! Armattan Lite Disclaimer Armattan Lite frames are not lifetime warrantied; they are built for a different purpose. They will, however, be priced accordingly (read: very competitively). Armattan Lite will offer spare parts for cheap and continue to support one of the original visions of the company; to keep guys in the air without milking them for replacements. Includes 1x 1.5mm Main Plate 1x 1.5mm Top Plate 8x M2 5mm Iron Cup Head Bolts 4x M2 10mm Iron Cup Head Bolts 8x M2 Nylon Nuts 4x Delrin M2 15mm Standoff 1x Cam Mount for Foxeer Razer Pico 4x Rubber Bands 1x Antenna Tube 2x Landing Dogbone pads
$18.75
RaceDayQuads Azure Power 2540 Tri-Blade 2.5" Prop 8 Pack - Choose Your Color
The combination of design, best materials, and experience makes the Azure Power 2540 propellers a winner! These 3-blade propellers are designed specifically for racing, and due to their high durability, they can stand up to abuse on the field! T-style mounting pattern using M2 screws. Check out all our Azure Power Products! Features Patented design and unique shape Optimized shape and airfoil Propellers are optimized for racing High durability and extremely lightweight Excellent quality Specifications Length: 2.5 inch Pitch: 4 inch Material: Polycarbonate Weight: 1g Hub ID: T-style M2 Includes 8x Azure Power 2540 Tri-Blade 2.5" Prop (4CW, 4CCW)
$3.29
RaceDayQuads Azure Power 5148 SFP Series Tri-Blade 5" Prop 4 Pack - Choose Color
The new Azure 5148 is slightly less aggressive compared to the Azure 5150 props which makes it a great choice for freestylers as well as racers for it's better efficiency, control and durability. Check out all our 5" Props and our Azure Power Products. Specifications Length: 5.1" Pitch: 4.8 Hub I.D.: 5mm Material: HG.(High-grade) Polycarbonate Available Color: Orange, Blue, Grey, Red Included: 4x Azure Power 5148 SFP Series Tri-Blade 5" Prop 4 Pack (2CW, 2CCW)
$3.19
RaceDayQuads BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - U.FL - Choose Color
Choose between white, red, and blue for the color of your ELRS antenna. Every last detail counts when it comes to styling up your quad, including your ELRS antenna! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories, as well as all our BayckRC Products! Specifications Frequency or Freq. Bandwidth: 2.4GHz Cable Length: 35mm Connector: U.FL / IPEX-1 Includes 1x BayckRC 2.4GHz RC Mini Antenna For ELRS Receiver - Choose Color
$1.30
RaceDayQuads BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props; increases thrust for 1S whoops, with HD digital VTX. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g. The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors. The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX. Specification Item: Meteor75 Pro Brushless Whoop Frame Material: PP Wheelbase: 80.8mm Weight: 7.73g Color: Black/Blue/Cyan/Yellow/Orange/White/Red Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors FC mounting hole: 26x26mm, F4 1S 5A FC Includes 1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
$4.99
RaceDayQuads BetaFPV SuperG True Diversity Dual 1 Watt Micro/Nano ELRS 2.4GHz RC Transmitter Module - Choose Your Color
Based on ELRS V3.3 and collaborated with ELRS developer team, the First Ever Gemini Dual-Frequency Diversity Transmitter comes out! At present, SuperG Nano Transmitter can be fully activated to achieve the best link quality ever combined with diversity rx such as SuperD receiver or SuperP receiver. With dual 1W transmit power, it excels in anti-interference performance and stability, making it the ideal solution for demanding applications like FPV racing, long-range flight, and professional photography. Check out our RC Transmitters and all our BetaFPV products! Features Introducing the pioneering Gemini Dual-Frequency Diversity Transmitter, propelling ELRS into the era of dual-frequency capabilities. Dual 1W transmit power experienced amplified signal strength, expanded transmission distances, and a substantial increase in remote control range. In conjunction with existing true diversity receivers, activating the Gemini mode ensures unwavering signal stability even in the most intricate radio environments. Meticulously crafted from CNC aluminum alloy, the transmitter casing facilitates efficient thermal conductivity, complemented by an intelligently designed Heatsink system for optimal heat dissipation. Featuring 2 customizable buttons and 1 USB port, the transmitter accommodates external power sources, enabling steadfast long-range expeditions. Diagram Below is the diagram for the SuperG Nano Transmitter. Note: Please assemble the antenna before powering on. Otherwise, the PA chip in the SuperG Nano Transmitter will be damaged permanently. The following is the comparison information of the 3 products SuperG Nano Transmitter, ELRS Nano TX Module and ELRS Micro TX Module. It shows the advancing updates and specifications more than ever. SuperG Nano TX Nano TX Micro TX Max RF Power Dual-1000mW 500mW 500mW/1000mW RF Chip Dual SX128x Single SX128x Single SX128x Antenna Mode Gemini Single Single Cooling System Supported Unsupported Supported Backpack Supported Unsupported Supported External Power Supply Supported 7-13V Unsupported Supported 5-12V Know More About Diversity&Gemini Antenna Diversity mode, two antennas. Switch the two antennas regularly to read the RSSI value of the signal and determine which antenna to use to receive data. True Diversity mode, where both antennas receive data at the same frequency, and the antenna that receives the correct data first is used. Gemini mode, where two antennas simultaneously receive telemetry data with a frequency difference of 40MHz. They also transmit data simultaneously but at different frequencies. This means that you can receive the same data packets on different frequencies and antennas. This mode provides stable flight even in complex radio environments. Among them, Gemini is the most advanced function yet of ExpressLRS - Gemini mode currently! It owns the most stable mode for receiving signals and offers higher resistance to interference and stability, making it suitable for various applications. SuperG Nano Transmitter features Gemini mode. In a testing video by developer Jye Smith, it is shown that with a refresh rate of 1000Hz, the LQ value fluctuates between 90-100 when the true diversity receiver is in operation. However, after switching to Gemini mode, the LQ value stabilizes at 99-100. This demonstrates that ELRS goes to great lengths to ensure link stability. Combination with Diversity RX Gemini mode is built upon the hardware foundation of true diversity receivers and requires a dual RF output high-frequency module. When used with Super series products, the advantages of Gemini mode can be fully utilized. And The effects of using the transmitter and receiver in various modes are as follows: TX RX Antenna Receiving Mode ANT1/ANT2/Switch Single Single Diversity Diversity Gemini Single Gemini Single Single Diversity Diversity Gemini Gemini Using it together with True Diversity Receiver ensures a super stable yet strong radio link for pilots to fly in any environment that require extremely stable signals and low latency. Including long-range flights, multiplayer flights, and FPV racing. It gives pilots a robust and aggressive flight experience. Dual 1W Output Power The SuperG Nano Transmitter with Dual-active Antennas@Dual Frequencies, each boasting a powerful 1W transmission power. Experience stronger signals, longer transmission distances, and enhanced remote control range. Cooling System Iteration The casing part is made of CNC aluminum alloy with an anodized surface for durability. It efficiently dissipates heat, thanks to its optimized internal airflow and high-speed fan with copper heat fins. Fly with confidence and enjoy reliable performance every time. Combination with Most Radio TX The SuperG Nano Transmitter could be configured via LUA script. EdgeTX and OpenTX radio transmitter that supports CRSF could be used easily. It available for popular Nano interface TX when used with Micro-Nano Module Adapter including Radiomaster TX16, Boxer, Zorro. Jumper T16, T20, T Pro. Frsky QX7, X9, X Lite. Note: LiteRadio 3 Pro Radio Transmitter cannot support dual transmitter power above 100mW due to power supply issues. Express Yourself in Vibrant Colors SuperG Nano Transmitter is a cutting-edge device that offers a distinct and personalized flair, with a range of three vibrant color options including red, grey, and black. The combination of its sleek design, superior functionality, and colorful choices perfectly caters to those who seek elevate style and performance. ELRS Series The ExpressLRS Series expands its lineup with the addition of SuperG Nano Transmitter. To achieve exceptional link quality, pair the Gemini TX with Super series diversity receivers. BETAFPV takes the flying experience to new heights by introducing ELRS links that offer long-range capabilities, low latency, and high refresh rates in a radio control system. Basic Configuration SuperG Nano Transmitter is designed to receive signals using the Crossfire Serial Data Protocol (CRSF). Therefore, the interface of the transmitter's high-frequency module needs to support CRSF signal output. Taking the EdgeTX transmitter system as an example, we will explain how to configure the transmitter to output CRSF signals and control the transmitter using Lua scripts. In the EdgeTX system, navigate to MODEL SEL and enter the SETUP menu. Disable Internal RF (set to OFF), enable External RF, and set the Output Mode to CRSF, as shown in the picture below. Lua scripting is a lightweight and compact scripting language that can be embedded in the transmitter for convenient access to and modification of the transmitter's configuration. Download the elrsV3.lua script from the BETAFPV Support Center or ExpressLRS Configurator. Copy the official Lua script, elrsV3.lua, to the SD card of the transmitter, under the path Scripts/Tools. On the EdgeTX system, long-press the SYS button or MENU button to access the SD-HC CARD menu. In this menu, select the elrsV3.Lua script and run it. If the Lua script runs successfully, the interface will appear as shown in the illustration below. Custom Buttons SuperG Nano Transmitter reserves 2 buttons that can be customized by users. Here are the specific steps to operate: Enable the transmitter's WiFi or power it on and wait for 60 seconds to enter WiFi mode using LUA programming. The RGB indicator light will slowly flash in green, indicating that the transmitter has automatically enabled WiFi (WiFi name: ExpressLRS TX, WiFi password: expresslrs). Connect your smartphone or computer to the WiFi network and open a web browser. Enter http://10.0.0.1 to access the custom button settings page. In the corresponding button's Action column, select the desired custom function. Then, choose the button type and the number of presses or duration in the Press and Count columns. Click SAVE to complete the settings. Currently, there are 6 available functions that can be assigned to shortcut buttons. There are 2 ways to use the buttons: long-press and short-press. The duration of a long press can be customized, while the number of presses for a short press can also be customized. The following are the 6 functions that can be set: Unused VTX Setting Increase Output Power Enable WiFi Enter VTX Channel Enter Binding Mode Enter VTX Band The pictures below show the functionality of the transmitter in its factory default settings. (The left button is Button1 and the right button is Button2). Button Action Press Count Button1(Left Button) Enter Binding Mode Short Press 3 Times Increase Power Long Press For 0.5 seconds Button2(Right Button) Go to VTX Channel Menu Short Press 2 Times Send VTX Settings Long Press For 0.5 seconds Note: This transmitter hardware does not support button RGB lights. Bind & External Power Supply The SuperG Nano Transmitter utilizes the default firmware, which employs the ExpressLRS V3.3.0 official protocol without a Binding Phrase. Consequently, the binding receiver should also be equipped with firmware V3.0.0 or higher and have no Binding Phrase set. For optimal performance, it is recommended to position the transmitter's two antennas as far apart as possible. Put the receiver in a bound state and wait for connection. Click the "Bind" in the Lua script or the set custom button to enter the binding mode. If the Indicator has turned solid, it indicates that the device has been bound successfully. Note: If the firmware of the TX is reflashed and the Binding Phrase is configured, you cannot enter the Binding state through the above method. Please set the RX to the same frequency Binding Phrase, and the TX and RX can be connected automatically. When the dual transmit power exceeds 500mW, the SuperG Nano Transmitter exhibits relatively high power consumption, leading to a reduced battery life. To prolong the transmitter's usage time, it is advisable to utilize an external battery as a power source. The power consumption of the transmitter is not only related to the transmit power but also to the telemetry ratio. When using high power of 500mW and above, the return ratio can be set higher to reduce power consumption and extend use time. For example, in Gemini mode, the power consumption of setting the return ratio to 1:128 is 1000mA, while the power consumption of setting the return ratio to 1:2 is only half of 1:128. Note: When the voltage of the radio transmitter battery or external battery is lower than 7V (2S) or 10.5V (3S), please use the Gemini mode of 500mW and 1W carefully, otherwise the transmitter will enter the restart state due to insufficient power supply, resulting in disconnection out of control. FAQ When establishing a link, it is not possible to enter the LUA script. The ELRS LUA script version is outdated and requires an upgrade to elrsV3.lua. The baud rate of the radio transmitter is set below 400K, and it should be adjusted to a value above that. If there is no option to modify the baud rate, it is necessary to update the radio transmitter firmware, ensuring that EdgeTX is at version V2.7.0 or newer. If your radio transmitter is unable to use the F1000 Packet rate or prompts "Baud rate is too low". Reason: F1000 requires a baud rate higher than 400K, and the radio transmitter's baud rate is 400K by default. Solution: First update the baud rate (greater than 400K) setting in the Hardware from the Model Setup menu or System menu, then restart the radio transmitter to ensure the baud rate setting has been applied. Then change the Packet rate. When the F1000 is turned on, the Packet rate between the radio transmitter and the SuperG Nano Transmitter is less than 1000. Reason: EdgeTX version problem Solution: The EdgeTX version needs to be upgraded to 2.8.0 or above. And the LiteRadio 3 Pro Radio Transmitter defaults to EdgeTX 2.8.0 and does not have this problem. The SuperG Nano Transmitter's default firmware is ELRS V3.3.0, and users need to update the receiver to V3.0.0 or above to bind the frequency. Download the Instruction Manual for the SuperG Nano Transmitter Download the firmware for the SuperG Nano Transmitter Download the Backpack firmware for the SuperG Nano Transmitter Download the STL File for the SuperG Nano TX Insulated shell Specification Item: BETAFPV SuperG Nano Transmitter Module | ELRS 2.4G Weight: 44.8g Color: Black, Red, Grey Antenna Connector: 2x RP-SMA RF Power: 25mw/50mW/100mW/250mW/500mW/1000mW Packet Rate: 50Hz/100Hz/150Hz/250Hz/333Hz/500Hz/D250/D500/F500/F1000 Frequency Band: 2.4GHz ISM Backpack: support Input Voltage: 7V~13V DC Rated Current: 8V,1000mA@1000mW, 1:128, Gemini mode USB Port: Type-C Fan Voltage: 5V Default Firmware Version: ExpressLRS V3.3.0 Target Name: BETAFPV SuperG Nano 2.4GHz TX Includes 1x SuperG Nano Transmitter (Black/Red/Grey) 2x 2.4G Glue Stick Antenna 1x USB to Type-C Data Cable 1x Type-C Male to XT30U Male Power Cable 1x GH1.25 Male to FUTABA Male Signal Cable 1x Micro-Nano Module Adapter (Standard Version) 1x Double Side EVA Foam Tape 1x Instruction Manual 1x Service Card
$69.99
RaceDayQuads Caddx Ratel 2 Micro 1200TVL CMOS 4:3/16:9 NTSC/PAL FPV Camera (2.1mm) - Choose Your Color
The second generation of the Caddx Ratel Camera, 1200TVL 1/1.8" starlight sensor with a 2.1mm lens. Check out the rest of our ever growing selection Micro FPV Cameras and all our Caddx products! Specifications Sensor: 1/1.8'' Inch Starlight Resolution: 1200TVL FOV: 165° Lens: 2.1mm TV System: NTSC & PAL (switchable) Image: 4:3 & 16:9 (switchable) WDR: Super WDR DNR: 3DNR Min. Illumination: 0.0001LUX Video Output: CVBS Day/Night: Auto/Color/B&W/EXT Shutter Speed: PAL:1/50~100,000; NTSC: 1/60~100,000 Wide Power Input: 5-40V Working Temperature: -20℃ ~ +60 ℃ Weight: 5.9g Dimension: 19*19*20mm Includes 1x Caddx Ratel 2 1200TVL 16:9/4:3 NTSC/PAL Micro FPV Camera
$30.99
RaceDayQuads CLRacing Race LED/PCB Wire 4 Pack - Choose Your Color and Size
NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your motor's wires while simultaneously making your quad look fantastic with 6 bright LEDs. Available in White, Red, Green, Purple, Yellow and Blue, the CLRacing LED Race Wire has colors to suit any quad! Note, the listing is for 4pcs. CLRacing Race LEDs Specs: Weight: 1.1g LED Quantity: 6 Size: 9x35x1.6mm Lipo Input: 3-6S Color: Red, White, Blue, Green Unit Quantity: 4pc
$4.99
RaceDayQuads EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color
The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop. Best match for 2206 - 2207 - 2306 motors around 2400kv. The Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints, aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller. Be sure to check out all our 5" props, and all our EMAX gear! Specifications Size: 5" Pitch: 4.3" Blades: 3-Blade Weight: 4.4 grams Moment of Inertia: 13.4 g*cm^2 Includes 4x EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop (2CW, 2CCW)
$3.49
RaceDayQuads EMAX Avan Rush 2.5x1.9x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color
The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit Geometry:2.5 inch diameter1.9 inch pitch3 bladesInertial Properties:weight: 1.4 gramsMoment of Inertia: 1.24 g*cm^2
$1.59
RaceDayQuads Flywoo Frame Arm LED Racewire 1-4S (1pc) - Choose your color
Customize your quadcopter with Flywoo's 4x10x1mm racewire LED Board! Choose from five colors - white, red, green, blue, and pink - and enjoy the bright LED lighting during night flights. Solder each LED piece to your motor wires and get ready to be amazed! Buy one and it will snap into four pieces for each arm on your quad! Great for toothpick quads where you may need a little more wire length. Don't forget to check out our other LEDs and Flywoo Products! Specifications Color: white / red / green / blue / Pink Quantity: 4 PCS Power support: 1-4S Racewire with build in LED Includes 1x Flywoo Frame Arm LED Racewire 1-4S (1pc) - Choose your color
$1.29
RaceDayQuads Forever Antenna Tube 2 Pack - Choose Your Color
The Forever Antenna Tube is the best way to protect your receiver antennas! Available in a number of colors, you receive two tubes and two black caps. Check out our other tools and building supplies! Includes 2x Forever Antenna Tube 2x Tube Cap
$3.05
RaceDayQuads Foxeer Apollo Micro HD FPV Camera for DJI - Choose Version
Foxeer enters the realm of digital starlight cameras with their new Apollo! This new camera is sure to impress and also comes in a standard lens option. Check out all our DJI compatible gear and our Foxeer product selection! Specifications Sensor: Sony 1/2" CMOS Video out: Digital Mipi Menu: No Aspect Ratio: 16:9 Resolution: Digital 720P/60fps FOV: Standard 160°, Starlight 170° Minimum Illumination 0.00001Lux White Balance Auto S/N Ratio: >65dB(AGC OFF) WDR: 100dB Size: 19*19mm Weight: 9.8g Includes 1x Foxeer Apollo Micro HD FPV Camera for DJI
$49.89
RaceDayQuads Foxeer Cat 3 Mini 1200TVL CMOS 2MP 4:3/16:9 PAL/NTSC LUX Night FPV Camera (2.1mm) - Choose Your Color
The Foxeer Cat 3 Mini is a professional night vision FPV camera. It features a 1200TVL resolution and 0.00001lux night vision, allowing for clear footage even in the dark. This camera is perfect for nighttime flying. As it offers a large aperture night vision lens, this cam is designed to capture clear images and videos even in dark settings. With PAL/NTSC switchable video system, 4:3/16:9 aspect ratio, and 100dB WDR, you get balanced, low noise, and low latency footage. Enjoy your nighttime FPV flights with Foxeer Cat 3 Mini. - Choose between Black and Red for your preference of color! Check out our selection of mini FPV camera and our ever-growing selection of Foxeer products. Features Less Noise Less Latency 0.00001LUX Super Starlight Exclusive Optimization for LED Large Aperture Night Vision Support OSD & Menu Remote Control with Foxeer FC Specifications Sensor Type: Sony 1/3" CMOS Sensor Scale: 4:3(Default)/16:9 Switchable Tv System: PAL(Default)/NTSC Switchable Resolution: 1200TVL Lens: M12 2.1mm Low Light Lens FOV 4:3: FOV-H: 100° FOV-D:125° FOV 16:9: 100° FOV-D:115° Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec Flip: Up, Down, Left and Right Video Output: CVBS Analog Signal Latency: Low to 2ms Minimum Illumination: 0.00001Lux White Balance: Auto DNR: 3DNR WDR: 100dB DAY/NIGHT: EXT/Auto/Color/B&W Flight OSD: Voltage/Cam Title/Time Input Voltage: 4.6V~20V Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V Language: ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本语 / EAAHNIKA Working Temperature: -10°~50°C RH90% MAX Working Humidity: 20~80% Storage Temperature: -20°~70°C Consumption: 95mA±15% @ DC12V Dimension: 22 x 22mm; 28 x 22mm(with bracket) Weight: 12.2g(Exclude cable) User Manual Manual Includes 1x Foxeer Cat 3 Mini 1200TVL CMOS 2MP 4:3/16:9 PAL/NTSC LUX Night FPV Camera (2.1mm) - Choose Your Color 1x OSD Board 1x 2pin OSD Cable 12x Screws 6x Gasket Ring 1x Servo Cable
$49.89
RaceDayQuads Foxeer Lollipop V4 5.8GHz SMA Antenna 2 Pack - Choose Version
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon! Choose your color preference!Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Bandwidth: 5.5-6.0GHz Polarization: RHCP and LHCP Gain: 2.6Dbi Axial Ratio: Close to 1 VSWR: < 1.07 (at center frequency) Radiation Efficiency: 98% Shell Material: PC + ABS Antenna Dimensions: 6cm Connection: SMA Weight: 11 Includes 2x Foxeer Lollipop V4 5.8GHz SMA Antenna
$19.89
RaceDayQuads Foxeer Lollipop V4 5.8GHz Stubby RP-SMA Antenna 2 Pack - Choose Version
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon! These are RP-SMA antennas. They're compatible with DJI MMCX Straight and MMCX Elbow to RP-SMA VTX Cables. We carry the standard SMA version as well. Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Bandwidth: 5.5-6.0GHz Polarization: RHCP and LHCP Gain: 2.6Dbi Axial Ratio: Close to 1 VSWR: < 1.07 (at center frequency) Radiation Efficiency: 98% Shell Material: PC + ABS Antenna Dimensions: Φ17x23mm Connection: RP-SMA Weight: 5g Includes 2x Foxeer Lollipop V4 5.8GHz Stubby RP-SMA Antenna
$19.89
RaceDayQuads Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack - Choose Version
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Bandwidth: 5.5-6.0GHz Polarization: RHCP and LHCP Gain: 2.6Dbi Axial Ratio: Close to 1 VSWR: < 1.07 (at center frequency) Radiation Efficiency: 98% Shell Material: PC + ABS Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long) Connection: UFL Weight: 4.8g(short), 6.8g(long) Includes 2x Foxeer Lollipop V4 5.8GHz UFL Antenna 2 Pack
$19.89
RaceDayQuads Foxeer Micro Lollipop 5.8GHz RP-SMA Antenna 2 Pack - Choose Version
Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralight builds. But that does not mean they still can't be used in bigger rigs! Check out the rest of our VTX Antennas and our selection of Foxeer products! Features Smaller, Lighter but stronger Durable structure Available in 3 different colors Ultra Lightweight Specifications Center Frequency: 5.7GHz Gain: 2.5dBi Axial Ratio: Close to 1 Band Width: 5.5G~6GHz Radiation Efficiency: 98% SWR: 1.06 at Center Frequency Connector: RP-SMA Dimension: 11*65mm Cable Length: 51mm Polarization: RHCP/LHCP Case Material: PC+ABS Cable: RG178 SFX086 Weight: 4.7 Grams Includes 2x Foxeer Micro Lollipop 5.8GHz RP-SMA Antenna
$19.89
RaceDayQuads Foxeer Micro Lollipop 5.8GHz U.FL Antenna 2 Pack - RHCP - Choose Your Color
Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can't be used in bigger rigs! Check out the rest of our VTX Antennas and our selection of Foxeer products! Features Smaller, Lighter but stronger Durable structure Available in 4 different colors Ultra Lightweight Specifications Center Frequency: 5.7GHz Gain: 2.5dBi Axial Ratio: Close to 1 Band Width: 5.5G~6GHz Radiation Efficiency: 98% SWR: 1.06 at Center Frequency Connector: u.Fl Dimension: 11*65mm Cable Length: 51mm Polarization: RHCP/LHCP Case Material: PC+ABS Cable: RG178 SFX086 Weight: 1.6 Grams (u.Fl connector) Includes 2x Foxeer Micro Lollipop 5.8GHz U.FL Antenna
$19.89
RaceDayQuads Gemfan Flash 3052 Tri-Blade 3" Prop 4 Pack - Choose Your Color
If you love Gemfan like we do, this should get your 3 incher nice and happy! The popular Gemfan 5152 has been shrunk down to make its mark in the micro class. Check out our ever-expanding selection of other 2'' - 3'' props! The Gemfan 3052 has been designed as a high-speed propeller. The inverse tip design helps to reduce blade tip vortex and the light weight of the propeller means it has a smaller moment of inertia and fast response time. Specification Brand Name: Gemfan Item Name: Gemfan 3052 - 3 Blade Propeller - Blue PC (Set of 4) Model: PMPC3052-3L Installing Diameter: 5mm Weight: 1.35g Includes 4x Gemfan Flash 3052 Tri-Blade 3" Prop (2CW, 2CCW)
$2.99
RaceDayQuads Gemfan Flash 5149 Tri-Blade 5" Prop 4 Pack - Choose Your Color
Gemfan has been a trusted name in multi-rotor propellers since the beginning and are still pushing the envelope of speed and control to this day! Check out all our 5" Props and all our Gemfan products! Features Lighter, faster, and stronger Compatible with POPO system When compared to the Gemfan 5152 Tri-Blade Propeller, the response at lower speeds was optimized Specifications Prop weight: 4.5 grams per prop Length x Pitch: 5.1 x 4.9 inch Outer diameter: 15.3mm Center aperture: 5mm Center thickness: 7mm Included 4x Gemfan Flash 5149 Tri-Blade 5" Prop (2CW, 2CCW)
$3.29
RaceDayQuads Gemfan Flash 6042 Bi-Blade 6" Prop 4 Pack - Choose Your Color
Power and efficiency in a beautiful form for the 6'' crowd. Gemfan has always been a solid name with racing props with the 5152 and the new 5552 series but now they are making splashes in the long-range world! Gemfan Flash Propellers have been specifically designed for high-speed racing. The inverse tip design helps to reduce blade tip vortex and the light weight of the propeller means it has a smaller moment of inertia and fast response time. Gemfan designers use CATIA modeling software and Ansys Fluent to design their Flash propeller airfoils and blade style. Combining the most effective airfoils with different motors to get the most iterations on their design. Testing factors such as surface pressure, airfoil optimization, lift force, resistance, and torque have resulted in the Flash series - made just for racing. Check out all our 6" Props and all our Gemfan products! Specifications Size: 6.0x4.2 inch 2 Blade Hub Size: 5mm Weight: 4.82g/pcs Material: PC Center thickness: 7.5mm Includes 4x Gemfan 6042 Bi-Blade 6" Prop (2CW, 2CCW)
$3.24
RaceDayQuads Gemfan Flash 6042 Tri-Blade 6" Prop 4 Pack - Choose Your Color
Love the Gemfan 6042 Bi-Blades? Well you're really going to love the new 6042 Flash Tri-Blade props from Gemfan! Check out all our 6" Props and all our Gemfan products! Specifications Size: 6042, 6.0x4.2 Material: PC Weight: 6.45g Mounting hole: 5mm Paddle size: 14mm Hub thickness: 7mm Suitable for 2206- motors, compatible POPO System Includes 4x Gemfan Flash 6042 Tri-Blade 6" Prop
$3.99
RaceDayQuads Gemfan Hulkie 5055S V2 Tri-Blade 5" Prop 4 Pack - Choose Your Color
The Hulkie 5055S is a significant update to the 5055 propeller from Gemfan. Namely new POPO support, as well as greatly increased durability at the hub of the prop. The aggressive pitch and inverse tips give insane grip and power. HULKIE series props are designed for small to medium complex race tracks, which adopt original airfoil and inverse tip design to reduce the downwash of blade tip vortex and reach the best lift-drag ratio. Meanwhile, the widened blade increases the wing area. Check out all our 5" props as well as all of our Gemfan products! Specifications Item name: Hulkie 5055S propeller Size: 5x5.5 inch Material: PC Mounting hole: 5mm Paddle size: 16.2mm Hub thickness: 7.5mm Weight: 5.2g Suitable for 2205-2306 motor Includes 4x Gemfan Hulkie 5055S V2 Tri-Blade 5" Prop
$2.99
RaceDayQuads GoPro Session Armor - 3D Printed TPU - Choose Your Color
Keep your session safe and sound with this 3d printed armor. We also offer a ND filter for those who really want to pimp out that HD footage! Check out all our 3D printed accessories! Includes 1x GoPro Session Armor - 3D Printed TPU - Choose Your Color
$9.99
RaceDayQuads HappyModel Larva X FC / VTX Insulator Spacer - 3D Printed TPU - Choose Your Color
This little 3D printed insulator is designed to go between the FC and VTX on the Happymodel Larva to allow more airflow and ease stack assembly. Check out the rest of our Larva Parts, 3D printed accessories and HappyModel gear! Includes 1x Happymodel Larva FC / VTX Insulator
$0.99
RaceDayQuads HQ Prop T3x3x3 PC Durable Tri-Blade 3" Prop 4 Pack (3 Hole) - Choose Your Color
An excellent middle of the road pitch for those micro builds! Check out all our 3" Props, and all our HQProp products! Specifications Propeller Diameter: 3 inch Pitch : 3 Blades : 3 Material: PolyCarbonate Weight: 1.48g Hub Diameter: 9.8mm Hub Thickness: 4.9mm Shaft: 1.9/1.5/1.9mm Adaptor Rings: NO Includes 4x HQ Prop T3x3x3 PC Durable Tri-Blade 3" Prop (2CW, 2CCW)
$2.59$2.29
RaceDayQuads HQ Prop V1S 3x4x3 Tri-Blade 3" Prop 4 Pack - Choose Your Color
An aggressive pitch 3" prop, great for those little rippers! Check out all our 3" props and all our HQProp products! Specifications Length: 3" Pitch: .4 Blades: 3 Material: Polycarbonate Hub Diameter13mm Hub Thicknes6mm Shaft: 5mm Weight: 2.05g Includes: 4x HQ Prop 3x4x3 V1S Tri-Blade 3" Prop (2CW, 2CCW)
$2.99
RaceDayQuads ImmersionRC rapidFIRE Goggle Module Bay Door - Choose Your Color
Want to stand out with your ImmersionRC rapidFIRE? Don't feel like sanding the red of the current module bay door? No worries, we carry translucent (see-through) and unpainted white. Now your rapidFIRE module will be eye-catching! Get yours today! Note: The color red was added, as a replacement module cover for the ImmersionRC rapidFIRE video receiver module. Check out our other FPV goggles and accessories and our ImmersionRC collection! Includes 1x ImmersionRC rapidFIRE Goggle Module Bay Door - Choose Your Color
$8.95
RaceDayQuads ImpulseRC Apex EVO Plastic Kit - Choose your Color
Replacement nylon plastic kit for the ImpulseRC Apex EVO 5" HD Freestyle Frame Kit. Check out our full range of Apex parts and accessories, as well as all our ImpulseRC Gear! Includes 1x ImpulseRC Apex EVO Plastic Kit - Choose your Color 4x Arm guard skids 1x Front bumper skid
$6.49
RaceDayQuads ImpulseRC Apex Plastics Kit - Choose Your Color
Spare replacement part for the ImpulseRC Apex Base Frame and Apex HD Frame. Check out the rest of our Apex spares and accessories and all our ImpulseRC gear! Includes 1x ImpulseRC Apex Plastics Kit - Black or Red
$5.99
RaceDayQuads ImpulseRC Apex Plastics Kit - Choose Your Color
Spare replacement part for the ImpulseRC Apex Base Frame and Apex HD Frame. Check out the rest of our Apex spares and accessories and all our ImpulseRC gear! Includes 1x ImpulseRC Apex Plastics Kit - Black or Red
$5.99
RaceDayQuads ImpulseRC Apex Race Wire 4 Pack - Choose Your Color
Race Wire that was designed to perfectly fit over the arms of the ImpulseRC Apex. Check out all our Apex parts & accessories, and our entire ImpulseRC selection! Includes 4x ImpulseRC Apex Race Wire
$5.99
RaceDayQuads ImpulseRC Micro Apex Plastics Kit - Choose Your Color
Protect your Micro Apex with these ultra durable plastic parts! Check out the ImpulseRC Micro Apex Frames and Accessories Collection and our full range of ImpulseRC Gear! Includes 1x ImpulseRC Micro Apex Plastics Kit
$5.49
RaceDayQuads M2 Countersunk Washer (1PC) - Choose Your Color
Individual anodized aluminum M2 countersunk washers in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! These are sloped inside, not stepped. If you're using our button/pan head M2 Hardware, you'll want to use the stepped washers. Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Countersunk Washer
$0.35
RaceDayQuads M2 Nylock Nut (1PC) - Choose Your Color
Individual anodized aluminum M2 nylon lock nuts in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Nylock Nut
$0.50
RaceDayQuads M2 Stepped Washer (1PC) - Choose Your Color
Individual anodized aluminum M2 stepped washers for button / pan head screws in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M2 Stepped Washer
$0.35
RaceDayQuads M3 7075 Aluminum Socket Head Hex Screw (1pc) - Choose Your Color & Size
For the serious builders who want to style up their quad with colored accents, this is where these come in. Pick between Green, Blue, Orange, Red, Pink, Purple, or Gold for your preference. For these M3 color hex screws, choose between 10mm, or 12mm of the height of your hardware. Check out all our hardware and the rest of our M3 Hardware! Features 7075 Grade aluminum (Motor and Top plate) Includes 1x M3 7075 Aluminum Socket Head Hex Screw (1pc) - Choose Your Color & Size
$0.55
RaceDayQuads M3 Aluminum Cone Washer (1pc) - Choose Color
Individual anodized aluminum M3 cone washers in a variety of colors, are sure to suit your next build. Sold individually, so be sure to select the quantity you want! Similar to your Apex cone washer just slightly bigger at the base. Customize the look of your quad while adding some protection for bolts! Be sure to pick up the rest of the hardware for your next build and any tools or building supplies you may need! Specifications Weight: 0.6g Diameter: 12.07mm Height: 3.98mm Includes 1x M3 Aluminum Cone Washer
$0.85
RaceDayQuads M3 Barbell Standoff (1pc) - Choose Your Version
A barbell style standoff with smooth edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Barbell Standoff
$1.05
RaceDayQuads M3 Countersunk Washer (1pc) - Choose Your Color
Individual anodized aluminum M3 countersunk washers in a variety of colors sure to suit your next build. Sold individually, so be sure to select the quantity you want! These are sloped inside, not stepped. If you're using our button/pan head M3 Hardware, you'll want to use the stepped washers. Be sure to pick up the rest of the hardware for your next build, and any tools or building supplies you may need! Includes 1x M3 Countersunk Washer
$0.25
RaceDayQuads M3 Flight Controller Vibration Dampener 4 Pack - Choose Your Color
This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Also available in M2 size. We also carry M3 Soft Mount Standoffs, and a wide variety of other Flight Controller Accessories and Stack Hardware! Includes 4x M3 Flight Controller Vibration Dampener
$1.49
RaceDayQuads M3 Knurled Barbell Standoff (1pc) - Choose Your Version
A barbell style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of our M3 Hardware! Includes 1x M3 Knurled Barbell Standoff
$1.05
You have seen 48 out of 123 products