RaceDayQuads
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads BetaFPV Meteor65 Whoop Frame - Choose Your Color
Spare replacement part for the BetaFPV Meteor65 Whoop. Check out all our Meteor65 parts & accessories, the rest of our whoop frames & accessories and all our BetaFPV gear! Features Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience. The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller. The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors. Specifications Item: Meteor65 frame Material: PP Size: 65mm Weight: 3.14/pc Color: Transparent/Blue/Black/Green/Pink/Orange Motor mounting hole: For 0603 motor and 080X Series Motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Upgrade With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. Using triangle bilateral stretch structure, makes frame more aesthetic. Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller. Includes 1x BetaFPV Meteor65 Whoop Frame
$4.99
RaceDayQuads Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop 8 Pack (1mm Shaft) - Choose Your Color
A great all-around whoop prop! Check out all our Micro Props and all our Gemfan products! Specifications Material: PC Quantity: 8PCS (4 X CW 4 X CCW) Paddle Disk Diameter: 31mm Weight: 0.28g Mounting Hole: 1mm Center Thickness: 5mm Max Blade Width: 5.71mm Includes 8x Gemfan 1219-3 Durable Tri-Blade 31mm Micro/Whoop Prop (4CW, 4CWW)
$4.99
RaceDayQuads Gemfan Flash 3052 Tri-Blade 3" Prop 4 Pack - Choose Your Color
If you love Gemfan like we do, this should get your 3 incher nice and happy! The popular Gemfan 5152 has been shrunk down to make its mark in the micro class. Check out our ever-expanding selection of other 2'' - 3'' props! The Gemfan 3052 has been designed as a high-speed propeller. The inverse tip design helps to reduce blade tip vortex and the light weight of the propeller means it has a smaller moment of inertia and fast response time. Specification Brand Name: Gemfan Item Name: Gemfan 3052 - 3 Blade Propeller - Blue PC (Set of 4) Model: PMPC3052-3L Installing Diameter: 5mm Weight: 1.35g Includes 4x Gemfan Flash 3052 Tri-Blade 3" Prop (2CW, 2CCW)
$2.99
RaceDayQuads Gemfan Flash 4052 Tri-Blade 4" Prop 4 Pack - Choose Your Color
Insane turning performance and fast response! Check out all our 4" Props and all our Gemfan products! Specifications Material: PC Weight: 3.85g Mounting hole: 5mm Paddle size: 14mm Hub thickness: 7.5mm Includes 4x Gemfan Flash 4052 Tri-Blade 4" Prop
$2.99
RaceDayQuads Gemfan Flash 5149 Tri-Blade 5" Prop 4 Pack - Choose Your Color
Gemfan has been a trusted name in multi-rotor propellers since the beginning and are still pushing the envelope of speed and control to this day! Check out all our 5" Props and all our Gemfan products! Features Lighter, faster, and stronger Compatible with POPO system When compared to the Gemfan 5152 Tri-Blade Propeller, the response at lower speeds was optimized Specifications Prop weight: 4.5 grams per prop Length x Pitch: 5.1 x 4.9 inch Outer diameter: 15.3mm Center aperture: 5mm Center thickness: 7mm Included 4x Gemfan Flash 5149 Tri-Blade 5" Prop (2CW, 2CCW)
$3.29
RaceDayQuads Gemfan Flash 6042 Bi-Blade 6" Prop 4 Pack - Choose Your Color
Power and efficiency in a beautiful form for the 6'' crowd. Gemfan has always been a solid name with racing props with the 5152 and the new 5552 series but now they are making splashes in the long-range world! Gemfan Flash Propellers have been specifically designed for high-speed racing. The inverse tip design helps to reduce blade tip vortex and the light weight of the propeller means it has a smaller moment of inertia and fast response time. Gemfan designers use CATIA modeling software and Ansys Fluent to design their Flash propeller airfoils and blade style. Combining the most effective airfoils with different motors to get the most iterations on their design. Testing factors such as surface pressure, airfoil optimization, lift force, resistance, and torque have resulted in the Flash series - made just for racing. Check out all our 6" Props and all our Gemfan products! Specifications Size: 6.0x4.2 inch 2 Blade Hub Size: 5mm Weight: 4.82g/pcs Material: PC Center thickness: 7.5mm Includes 4x Gemfan 6042 Bi-Blade 6" Prop (2CW, 2CCW)
$3.24
RaceDayQuads Gemfan Flash 6042 Tri-Blade 6" Prop 4 Pack - Choose Your Color
Love the Gemfan 6042 Bi-Blades? Well you're really going to love the new 6042 Flash Tri-Blade props from Gemfan! Check out all our 6" Props and all our Gemfan products! Specifications Size: 6042, 6.0x4.2 Material: PC Weight: 6.45g Mounting hole: 5mm Paddle size: 14mm Hub thickness: 7mm Suitable for 2206- motors, compatible POPO System Includes 4x Gemfan Flash 6042 Tri-Blade 6" Prop
$3.99
RaceDayQuads Gemfan Flash 7040 Tri-Blade 7" Prop 4 Pack - Choose Your Color
More 7" options bought to you by Gemfan! 4 color choices including Gemfan's fantastic "ferarri red". Check out all our 7" props, and all our Gemfan products! Specification Model: Flash 7040 Item Name: 7040 7 Inch 3-Blade Propeller Material: PC Weight: 7.9G Center Hole Inner Diameter: 5mm Paddle Disk Diameter: 178.43mm Center Thickness: 7.5mm Maximum Blade Width: 18.24mm Adaptation Motor: 2206-1500KV (tested motor) Recommended Motor: 2206 Includes 4x Gemfan Flash 7040 Tri-Blade 7" Prop (2 CW, 2 CCW)
$3.99
RaceDayQuads Gemfan Flash 7042 Durable Bi-Blade 7″ Prop 4 Pack – Choose Your Color
As smooth a 7″ bi-blade as you’ll find, the Gemfan 7042 is great for efficient long-range cruising! Gemfan Flash Propellers have been specifically designed for high-speed racing. The inverse tip design helps to reduce blade tip vortex and the light weight of the propeller means it has a smaller moment of inertia and fast response time.Gemfan designers use CATIA modeling software and Ansys Fluent to design their Flash propeller airfoils and blade style. Combining the most effective airfoils with different motors to get the most iterations on their design. Testing factors such as surface pressure, airfoil optimization, lift force, resistance, and torque have resulted in the Flash series - made just for racing. Check out all our 7" props, and all our Gemfan products! Specifications Material: PC Weight: 5.52g Pitch: 3.6in Prop Dia:178.39mm Center Thickness:7.5mm Center Hole Dia: 5mm Adaptive Motor: 2407-2408 Colors: Black , Clear, Blue Includes 1x Gemfan Flash 7042 Durable Bi-Blade 7″ Prop 4 Pack – Choose Your Color
$2.29
RaceDayQuads Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop 8 Pack (1.5mm) - Choose Your Color
A low pitch biblade designed for high RPM light weight applications. Check out all our 3" props and all our Gemfan gear! Features 2mm press fit and T mount Will fit 1.5mm shafts with T mount Polycarbonate Very low load Specifications Diameter: 3" Pitch: 1.8" Blades: 2 Material: Polycarbonate Shaft Hole: 1.5mm Weight: 0.75g Includes 8x Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop (4 CW, 4 CCW)
$3.29
RaceDayQuads Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop 8 Pack (2mm) - Choose Your Color
A low pitch biblade designed for high RPM light weight applications. Check out all our 3" props and all our Gemfan gear! Features 2mm press fit and T mount Will fit 1.5mm shafts with T mount Polycarbonate Very low load Specifications Diameter: 3" Pitch: 1.8" Blades: 2 Material: Polycarbonate Shaft Hole: 2mm Weight: 0.75g Includes 8x Gemfan Hurricane 3018 Durable Bi-Blade 3" Prop (4 CW, 4 CCW)
$3.29
RaceDayQuads Gemfan Hurricane 51433 Durable Tri-Blade 5" Prop 4 Pack - Choose Your Color
New freestyle props from Gemfan! Check out the rest of our 5" props and all our Gemfan products! Specifications Diameter: 5.1" Pitch: 3.5" Blades: 3 Material: Polycarbonate Blade Diameter 129.3mm Max. Blade Width 15.43mm Hub Thickness: 7mm Shaft Hole: 5mm Weight: 3.8g Includes 4x Gemfan Hurricane 51433 Durable Tri-Blade 5" Prop (2 CW, 2 CCW)
$3.29
RaceDayQuads Gemfan Hurricane 51499 Durable Tri-Blade 5" Prop 4 Pack - Choose Your Color
Welcome a new design in FPV drone racing propellers the Gemfan Hurricane 51499! Designed with racing in mind the 51499 propeller stays steady at high speed runs and has a fast response going through those low gates and split s drops! The Gemfan Hurricane 51499 is extremely durable and easy to bend back after a crash so no need to worry about breaking a prop quickly stay in the air longer. Get yours today! Check out all our 5" Props and all our Gemfan products! Specifications Hub Thickness: 7mm Material: PC Polycarbonate Length: 5.1 Pitch: 49.9 Includes 4x Gemfan Hurricane 51499 Durable Tri-Blade 5" Prop (2CW, 2CCW)
$2.99
RaceDayQuads Gemfan Hurricane X 51455 Durable Quad-Blade 5" Prop 4 Pack - Choose Your Color
Gemfan has released a quad bladed Hurricane series prop for even more grippy goodness! Hurricane X props are lighter and more durable than ever. These are a great choice for tight indoor tracks that require lots of grip and precise maneuvering. Check out the rest of our 5" prop selection and all our Gemfan products! Specifications Diameter: 5.1" Pitch: 4.55" Blades: 4 Material: Polycarbonate Blade Diameter: 129.75mm Max. Blade Width: 12.55mm Hub Thickness: 7mm Shaft Hole: 5mm (POPO) Weight: 5.3g Includes 4x Gemfan Hurricane X 51455 Durable Quad-Blade 5" Prop (2CW, 2CCW)
$3.29
RaceDayQuads Gemfan WinDancer 3028 Tri-Blade 3" Prop 4 Pack (5mm/1.5mm Mounting) - Choose Your Color
Gemfan's newest micro prop, designed to fit the 2 major kinds of micro motor mounting! Check out all our 3" props and all our Gemfan gear! Features Compatible with T-mount style shafts and conventional 5mm shafts. High efficiency, outstanding control, fast response and long duration. Light blades, only 1.49g! Specifications Brand name: Gemfan Item name: WinDancer 3028 3-blade propeller Color: clear yellow, whiskey, clear blue, clear purple, clear red, clear white Pitch: 2.8" Material: PC Weight: 1.49g each Mounting hole: 5mm round-hole/ 1.5mm 3-hole Paddle diameter: 76.2mm Hub thickness: 5.5mm Max blade width: 11.1mm Includes: 4x Gemfan WinDancer 3028 Tri-blade 3" Prop (2CW, 2CCW)
$2.69
RaceDayQuads GoPro Session Armor - 3D Printed TPU - Choose Your Color
Keep your session safe and sound with this 3d printed armor. We also offer a ND filter for those who really want to pimp out that HD footage! Check out all our 3D printed accessories! Includes 1x GoPro Session Armor - 3D Printed TPU - Choose Your Color
$9.99
RaceDayQuads HappyModel Larva X FC / VTX Insulator Spacer - 3D Printed TPU - Choose Your Color
This little 3D printed insulator is designed to go between the FC and VTX on the Happymodel Larva to allow more airflow and ease stack assembly. Check out the rest of our Larva Parts, 3D printed accessories and HappyModel gear! Includes 1x Happymodel Larva FC / VTX Insulator
$0.99
RaceDayQuads HappyModel Mobula6 Whoop Frame - Choose Color
Spare replacement part for the Happy Model Mobula6 Check out the rest of our Mobula 6 parts & accessories and all our HappyModel gear! Includes 1x HappyModel Mobula6 Frame
$3.50
RaceDayQuads HappyModel Mobula7 V3 75mm 2S Upgrade Whoop Frame - Choose Your Color
Turn your Mobula7 from amazing to amazingly tough! Happymodel has redesigned the Mobula7 frame, making it more rigid and durable and adding some new features. The frame has slots to hold the Super Tiny LED Strip Board and the battery holder can now hold 2S and 3S packs! The V3 frame will also fit the new Mobula7 HD. Here's some other upgrades and spares to go with your new frame. Specification Wheelbase: 75mm Weight: 5.5g Color: Clear or Black(for Mobula7 HD) Compatibale with: Happymodel 2S 300mah, RDQ 2S 300mah, and the new RDQ 350 2S
$4.99
RaceDayQuads HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop 4 Pack - Choose Your Color
Efficiency, feel, and POP! That's what pilots love about the V1S 5" prop from HQ. With a highly tuned design, the 5x4.3x3 is made to make all of your 5" FPV dreams come true. The package includes 4 props (2cw and 2ccw), and we carry all available colors. Check out all our 5" Props and all our HQProp products! Specifications Length: 5 inch Pitch: 4.3 Blades: 3 Material: Poly Carbonate Hub Diameter：13.2mm Hub Thickness：7.1mm Shaft: 5mm Weight: 3.75g Includes 4x HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop (2CW, 2CWW)
$3.69
RaceDayQuads Lumenier Gate Breaker 5x5.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color
The Lumenier 5x5.3x3 Gate Breaker propeller is designed for high speed, durability and extreme performance. This unique and aggressive airfoil provides incredible thrust throughout the entire power-band, resulting in a "locked in" feel while flying with quick throttle response and acceleration. In addition to incredible power potential, the Gate Breaker also has great efficiency. Most high performance propellers suffer from high amp draw to achieve top-end thrust, but the Gate Breaker advanced airfoil allows for both high performance and good efficiency. The Gate Breaker uses airfoils that provide high coefficients of lift at extremely high angles of attack, without any stall characteristics. This trait allows for an extremely high pitch, fast, and aggressive propeller that is efficient even at static thrust conditions where other high pitch propellers suffer. The Gate Breaker propellers are made from a new ultra-durable, crash resistant polycarbonate material. This allows the propellers to resist breaking in a crash or prop strike. Now you can clip a gate or a tree branch and keep flying! Each blade is 100% balanced direct from the mold as well, giving you smooth and precise flight characteristics. FPV Drone Racing and Freestyle flying require high-quality propellers that ensure optimal thrust, efficiency and top-end speed to allow pilots to consistently perform at their best. Lumenier prop design starts from the ground up, considering flight speed, blade RPM and other factors to optimize each profile. Leveraging a proprietary algorithm, each prop has a unique airfoil and blade design, rather than using the same blade and duplicating them on double, triple or quad-bladed props. This leads to subtle, yet important, performance improvements that can mean the difference between a win or a DNF on race day. "The Gate Breaker props are durable, have great responsiveness, and superb control at high throttle. They are one of the most well rounded props I've ever flown!" - Cain "MAD_AIR" Madere Includes 4x 5x5.3 3-Blade Gate Breaker Propellers, 2x CW and 2x CCW Design. From the ground up. During the design of any Lumenier propeller, key elements are considered such as blade RPM, motor size and KV, and overall flight envelope. These inputs create operating points such as Reynolds Numbers, Mach, Beta Angles, etc. which are used to guide the design process. Performance based on Science. Given the operating points and design goals Lumenier produces unique airfoils leveraging a proprietary genetic algorithm that iterates 10s of thousands of possible airfoils and compares them to each other and also a library of well known existing airfoils. This creates the best possible and most suitable combination of airfoils as well as overall blade design. For this reason, no 2 blades on any Lumenier propeller are the same. Airfoil design with a purpose. Calculus and proprietary algorithms help translate 2D coefficients of lift, drag, and moment into 3D coefficients that account for high blade loading and near static thrust conditions that a multi-copter will encounter during flight.
$3.99
RaceDayQuads Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
Dampen motor vibrations with these 3D printed TPU FPV motor soft mounts. Placing these between your motor and frame will reduce the vibrations which make it to your flight controller. That, in turn, will increase flight performance. Able to fit all sold stator sizes and fit all of our 16x16mm and 19x19mm bolt pattern motors. Check out all our 3D printed accessories! Includes 1x Motor Soft Mount 4 Pack - 3D Printed TPU - Choose Your Color
$2.99
RaceDayQuads NewBeeDrone 65mm Cockroach Brushless Super Durable Whoop Frame - Choose Color
Frustrated with constantly fixing struts and breaking frames, we set out to find something better. We worked with a number of manufacturers and after numerous prototypes and revisions, we are proud to introduce the Cockroach Super-Durable Brushless Frame for Tiny Whoop-style quads. Traditional Looks and Geometry maintain those flight characteristics you are used to and ensure easy compatibility with the Beebrain as well as most other popular flight controllers. Lightweight and Durable. We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls. Total weight 3.71g Easy and Inexpensive. None of this is any good if it's super difficult to use and super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine-tuned to make installation and removal much easier. Check out the rest of our micro frames and the rest of our NewBeeDrone products! Specifications Motor Mount Pattern: Tri 6mm Weight: 3.71g Includes 1x NewBeeDrone 65mm Cockroach Brushless Super Durable Whoop Frame
$6.99
RaceDayQuads NewBeeDrone 75mm Cockroach Brushless Extreme-Durable Whoop Frame - Choose Color
NewBeeDrone Cockroach Brushless Extreme-Durable Frame 75mm Design Intent: For this frame, we worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. The Cockroach 75mm is lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier so you can get the most performance out of NewBeeDrone flight controllers and motors. Every gram of frame material was either added or taken away to ensure that what was left was there for a reason. Lightweight and Durable: We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls with a total weight of 6.98g. Traditional Looks and Geometry: This 75mm Cockroach frame has adaptable FC locations and a multitude of additional mounting points across the frame. We delivered a frame that has 2 board locations with 1x1inch or 25.4x25.4mm hole spacing. One mounting location on the top and another below to mount an additional board like a DVR or a 4K HD recording board. The 2-board mounting adaptability allows for the possibility for a pusher-style flying configuration to be used as well. 1mm Carbon Fiber Plate A 1mm carbon plate is included for increased durability insurance. Though the frame can be flown without it, the carbon allows for additional adaptability and opens the frame's use for exciting opportunities in a pusher-style configuration. Flip the frame over and install it. Please be aware, the motor screws that come with the 75mm frame are expected to be used with carbon fiber. If you choose to use them without the carbon fiber plate – the screws may contact the motor PCB. This 75mm frame does not come with just one limiting battery mounting solution. We understand that depending on the utility and flying style, many people want to run one or two 300mah Nitro Nector Golds in the traditional battery position or in a ‘toilet-tank’ position. We have developed several printable, TPU battery mount solutions to use with the frame and are always open to your suggestions. Included are 4 3D printed mounting tabs. Use 2 to mount one Nitro Nectar Gold 1s Battery and all 4 to mount 2x Nitro Nectar Gold 1s Batteries. When using 2 batteries, you can choose to run them in either series (2s) to increase voltage or parallel (1s) to increase capacity. Easy and Inexpensive. None of this is any good if it's super difficult to use and/or super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine-tuned to make installation and removal much easier. Any of our other whoop BNFs can be directly dropped in into the 75mm frame. Check out the rest of our micro frames and the rest of our NewBeeDrone products! Specifications Motor Mount Pattern: Tri 6mm Weight: 3.71g Includes 1x NewBeeDrone 75mm Cockroach Brushless Extreme Durable Whoop Frame
$3.99
RaceDayQuads NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
Introducing 40mm AZI props! NewBeeDrone is dedicated to providing the best FPV drone products in the industry. The Azi Props come from a 9-month project with NewBeeLabs to create micro props for flight time, speed, & control. After many iterations and tests, their team has developed light, well-rounded props for freestyle and racing. They boast linear throttle control, quicker spool-up times, cornering grip, higher top-end speed, bottom-end grunt, and efficient performance. Check out the rest of our Micro Props, and the rest of our NewBeeDrone products. Specifications Material: Polycarbonate Diameter: 40mm Pitch: 37.9mm Shaft Hole: 1mm 0.3g ea. Hub Thickness: 5mm Includes 1x NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color
$3.99
RaceDayQuads NewBeeDrone BeeBrain Goober Whoop Canopy - Choose Color
Spare replacement canopy for AcroBee, BLV3. Check out all our whoop frames and all our NewBeeDrone gear! Includes 1x NewBeeDrone BeeBrain Goober Canopy
$4.99
RaceDayQuads NewBeeDrone BeeBrain Goober Whoop Canopy V2 w/Adjustable Camera Mount - Choose Color
Check out the second generation goober canopies that works with 14 x 14 size FPV cameras. As long as the camera board size has 14 x 14 mounting screw hole, and has a side screw hole this canopy will work with it. It also allows you to adjust the angle of the camera from 0-55 degrees. Check out all our whoop frames and all our NewBeeDrone gear! Features Adjust camera angle from 0- 55 degree. Includes 1x NewBeeDrone BeeBrain Goober Canopy V2 Camera Mount - Choose Color
$4.99
RaceDayQuads NewBeeDrone BeeBrain V2 Color Camera Mount Whoop Canopy - Choose Your Color
Looking for a easy and affordable way to spice up your AcroBee Stack? Tired of the old clear mount that everyone has? Now you can stand out or match your cockroach frame with the same strong and reliable mount that comes in the BeeBrain V2 BeeEye Camera. Even mix and match different colors to get that super unique look you've always wanted with an available 5 different color options. Check out all our whoop frames and all our NewBeeDrone gear! (20 Degree Mount) 1.3g Weight Fits all BeeEye versions Includes 1x NewBeeDrone BeeBrain V2 Camera Color Mount
$2.99
RaceDayQuads RadioMaster Pocket Radio Case - Choose Your Color
A colored replacement case for the RadioMaster Pocket EdgeTX RC Transmitter. Choose between multiple vibrant colors to style up your radio! Check out our RadioMaster collection and all our RC transmitters! Features Multiple color case options Ergonomically Designed Easy Installation Specifications Color: Orange, Yellow, Pink, Charcoal, Clear Includes 1x RadioMaster Pocket Radio Case - Choose Your Color
$14.99
RaceDayQuads RDQ 1Kg Spool TPU 95A 1.75mm Filament - Choose Color
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. For all of your FPV 3D printing needs, we bring you RDQ TPU! With RDQ TPU you can expect the highest quality, rivaling top brands like Sainsmart. All 3D parts on our website that we print ourselves are printed with RDQ TPU, because reliability and durability are of the utmost importance to us and our fellow pilots! This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Check out all our 3D printed accessories! Includes 1x RDQ 1Kg TPU 95A Spool 1.75mm
$24.99
RaceDayQuads RDQ 3/8'' x 2ft. Braided Mesh Wire Wrap for ESC and Motor Wires
Every OCD builder out there needs a way to hide all of those normal looking cables... so here you go! 3/8th of a inch to fit all of your normal motor cables in a slick, clean sleeve. A necessity for all of our 4 in 1 ESC's! Check out our other tools and building supplies! Includes 1x RDQ 3/8'' x 2ft. Braided Mesh Wire Wrap for ESC and Motor Wires
$1.99
RaceDayQuads RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU - Choose Your Color
Convert any frame to use a 20x20 stack or even use a 30x30 4n1 ESC and 20x20 FC with this new RDQ TPU Stack adapter! NOTE: On the bottom of the adapter the 20x20 mounting holes are recessed and you must remove the TPU supports for flush mounting. Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 3mm Weight: 1.28g Includes 1x RDQ 30x30 to 20x20 Stack Adapter - 3D Printed TPU
$2.99
RaceDayQuads RDQ 90° MMCX to SMA Pigtail - Choose Color
A high quality 90° MMCX to SMA pigtail. Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female Length: 80mm Weight: 4.63g Includes 1x RDQ 90° MMCX to SMA Pigtail
$3.05
RaceDayQuads RDQ DJI O3 Unit 30x30/20x20 Mount - 3D Printed TPU - Choose Your Color
The perfect mount for the DJI O3 Air unit VTX! Made for RDQ by Chris Booth AKA DobragFPV!Available in tons of colors and will take your build to the next level! This mount doesn't only look cool, It keeps your expensive digital VTX protected and in place, while allowing it to be raised slightly off the carbon creating room for tons of cooling to keep your video crisp all day! Check out all our 3D printed accessories! Features Made for RDQ by Chris Booth AKA DobragFPV! 4x M3 hex nuts needed for 30x30 mounting 4x M2 hex nuts needed for 20x20 mounting Specifications Designed to work with DJI O3 Unit Mount size: 30x30mm 20x20mm Dimensions: H:20mm L:38mm W:38mm Includes 1x RDQ DJI O3 Unit 30x30 / 20x20 Mount Adapter - 3D Printed TPU
$5.99
RaceDayQuads RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU - Choose Your Color
The perfect stackable mount for the RDQ Mach 3 VTX / RDQ Mach 2 VTX / R-XSR or XM+ Combo! Check out all our 3D printed accessories! Specifications Mount size: 30.5x30.5mm Height: 11mm w/ R-XSR Includes 1x RDQ Mach 2 / Mach 3 Combo 30x30 Stack Mount - 3D Printed TPU
$2.99
RaceDayQuads SMA Grip (1PC) - 3D Printed TPU - Choose Your Color
Never worry about struggling to tighten that SMA connection again with the SMA Grip! Others have a plastic SMA nuts that easily break upon impact but these are a bit more robust with colors to choose from. Check out the rest of our 3D Printed Gear! Includes 1x SMA Grip (1PC) - 3D Printed TPU
$0.99
RaceDayQuads Standoff T Antenna Holder Mount 2 Pack for Crossfire and R9 - 3D Printed TPU - Choose Your Color
T antenna tube holders compatible with both the normal and knurled M3 standoffs (not barbell/dogbone). Works perfect with the TBS Immortal T and R9 antennas. Check out the rest of our 3D printed products. Cant find the 3D parts you're looking for? Check out our custom 3D printing service! Includes 2x RDQ Standoff T Antenna Holder Mount for Crossfire and R9
$3.49
RaceDayQuads Universal 30° GoPro Session Mount - 3D Printed TPU - Choose Your Color
This is a lightweight 30 degree GoPro Session mount. Use this flexible and tough TPU to protect your prized possession! Check out all our 3D printed accessories! Specifications Material: TPU Weight: 20g Includes 1x Universal 30° GoPro Session Mount - 3D Printed TPU - Choose Your Color
$12.99
RaceDayQuads XT30 Cover Battery Protector - 3D Printed TPU - Choose Your Color
These 3D printed TPU XT30 covers will protect your mini & micro batteries and give you peace of mind. Handy for keeping track of which of your packs are charged, dead, or in storage. Also available for XT60 plugs. Check out all our 3D printed accessories, and our chargers & charging accessories! Includes 1x XT30 Cover Battery Protector
$0.49
RaceDayQuads XT60 Cover Battery Protector - 3D Printed TPU - Choose Your Color
These 3D printed TPU XT60 covers will protect your batteries and give you peace of mind. Handy for keeping track of which of your packs are charged, dead, or in storage. Also available for XT30 plugs. Check out all our 3D printed accessories, and our chargers & charging accessories! Includes 1x XT60 Cover Battery Protector
$0.69
RaceDayQuads Zip Tie 50 Pack - Choose Your Version
Zip ties! Choose from several colors that match our hardware selection, and two sizes (250x4mm & 150x3mm) Check out all of our tools and building supplies! Includes 50x Ziptie - Choose Size & Color
$3.49
