RaceDayQuads
RaceDayQuads 0.8mm Heat Shrink Tubing 1 Ft. - Choose Color
We have expanded our line of building supplies with the addition of a variety of 0.8mm heat shrinks. Good for protecting those smaller wiring connections. Check out all our tools and building supplies! Specifications Outer Diameter: 0.8mm Temperature Rating: 125 C Voltage Rating: 600V Includes 1x 0.8mm Heat Shrink Tubing by the foot
$0.34
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads AMASS XT150 w/ 6mm Gold Connector (1PC) - Choose Your Version & Color
These XT150 connector sets are ideal for large batteries, ESC, or motors! The durable nylon material is less likely to experience damage than other connectors and works well with up to 150 amps of current. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Features Nylon material holds 150A current for extended periods without exceeding 80 Degrees. Male connectors use a collet-style spliced contact area. Dovetail linking. Easy to solder. Specifications Max Amps: 150 Diameter: 6mm Connection Type: Male or Female Includes 1x AMASS XT150 w/ 6mm Gold Connector - Choose Version & Color
$0.90
RaceDayQuads Amass XT60H Connector (1PC) - Choose Your Version
Premium Amass XT60H connector for when the classic XT60 just won't cut it. The snap on cover for the wire side of the connector means no need for heat shrink. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x Amass XT60H Connector - Male or Female
$0.65
RaceDayQuads Amass XT90H Connector (1PC) - Choose Version
These genuine Amass XT90H connectors are perfect for those that like to go big with their builds. If you need a connector that can to handle a lot of current, the XT90 will do the job with ease! Choose male or female, and your color preference! Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Specifications Plating: Brass and Gold Includes 1x Amass XT90 H Connector
$1.05
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads Armattan Odonata 1.6" Micro Frame Kit
Introducing the Armattan Odonata, the smallest FPV frame we have ever produced. But do not let the small size fool you. This model was designed and put through testing phases by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. We figured it was best to let him describe this frame so here's what he has to say about it. The Odonata is a nano drone that fits in your pocket, rips like a boss, and hums like a dragonfly (true to its namesake). Fits through the tiniest of gaps, and makes worlds out of small spots. 1.5mm thick carbon fiber plates make for great durability, and the custom delrin standoffs are almost half the density of the standard aluminum ones (while retaining the needed strength), making the Odonata one of the lightest frames on the market, in a class where weight is the #1 priority. Fully thought out, the Odonata offers proper motor protection, camera protection, and build durability. A top mounted battery makes for easy access, and optimal flight characteristics. The Odonata captures the essence of whoops and boosts their performance, durability, and ease of use. With a nearly identical wheelbase, the Odonata has a not-so-identical amount of performance, versatility and fun, however. It's a better flyer. For those of you who can print your own parts, you can find the .stl files here. Check out our other Micro frames, as well as the rest of our Armattan selection! Armattan Lite Disclaimer Armattan Lite frames are not lifetime warrantied; they are built for a different purpose. They will, however, be priced accordingly (read: very competitively). Armattan Lite will offer spare parts for cheap and continue to support one of the original visions of the company; to keep guys in the air without milking them for replacements. Includes 1x 1.5mm Main Plate 1x 1.5mm Top Plate 8x M2 5mm Iron Cup Head Bolts 4x M2 10mm Iron Cup Head Bolts 8x M2 Nylon Nuts 4x Delrin M2 15mm Standoff 1x Cam Mount for Foxeer Razer Pico 4x Rubber Bands 1x Antenna Tube 2x Landing Dogbone pads
$18.75
RaceDayQuads AtomRC Dolphin Plane Kit - Black
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. The AtomRC Dolphin Plane Kit is a durable lightweight plane with molded EPP embedded with carbon fiber tubes. Features include a detachable nose and wings, integrated GoPro mount, fuselage protector, and other cool features! This is a kit you will need a receiver, battery, ESC, motor, and FPV system. Find the FPV PNP and PNP versions here! Browse the rest of our Wing Gear! Features 845mm wingspan EPP molded , embedded with carbon fiber tubes, durable and lightweight. Carbon fiber tubes help keep wings rigid during flight Detachable wing, easy to transport. Detachable nosecone for GoPro mounting V tail design for added stability Pre-installed wing and fuselage protector for durability Compatible with GoPro Hero 5-7. Movable battery slot for “CG” adjustment. Pre-installed camera and VTX antenna cable for FPV gear. Air inlet and outlet for FPV gear cooling. Specifications Wingspan: 845mm Length: 710mm Propeller recommend: 5~6 inch Battery recommend : 4S 1300-2200mah Dimension: 660*225*135mm Includes 1 x Dolphin Kit 1 x Ball Push/Push Rod 1 X Sticker 1 x Battery Strap 1 x Camera Cable 1 x SMA to UFL VTX cable 1 x Screws Diagram
$88.99
RaceDayQuads AtomRC RTH Dolphin V1.1 FPV Fixed Wing - Choose Your Color
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. The AtomRC RTH Dolphin V1.1 is a 845mm wingspan V-tail plane. The Dolphin can fly stable at high and low speeds, and the large fuselage offers lots of space to install the electronics. The detachable wing made the wing easy to transport, V tail made the Wing more stable for cruising. This wing has a black body with white accents and stickers to further style your craft. This wing will come with an AtomRC F405 NAVI FC, allowing you to use the Return To Home(RTH) feature as the RTH version can come right back to you and land. It's good to know about the flight controller having the ability to use two firmware INAV or Arduplane, both firmware's already pre-turned for the plane. This wing comes as a pre-built kit, PNP, pre-tuned, and with all electronic are pre-installed. This wing is perfect for beginners and stress free for veterans. Note: You are going to need; Radio, Receiver, Battery, and a Charger. Although this system has Return To Home (RTH) included, you will need to add components like a camera and VTX for FPV. Ardupilot parameter settings can be found here. Browse the rest of our PNP wings, as well as our AtomRC selection! Features EPP molded wing, embedded with carbon fiber tube, durable and light weight. Carbon fiber tube enhanced elevens, more rigid elevens during high speed fight. Detachable wing, portable to transport. Detachable head, two head for choice, use can choose fly with Gopro or without Gopro. Rubber band and magnet to lock the Gopro, easy to install the Gopro. V tail design make the wing more stable than normal fly wing. Pre installed wing and fuselage protector, more durable during landing. Compatible with GOPRO hero 5-7. Movable battery slot for better “CG” adjustment. Pre installed camera cable and antenna for FPV gear. Air inlet and outlet for FPV gear cooling. Specifications Wingspan: 845mm Motor: AtomRC 2306 1700Kv (included) ESC: AtomRC BLS 30A 2-4S with 5V/3A BEC (included) Servo: AtomRC 9g Digital Servo 300mm 2pcs (included) FC: AtomRC F405 NAVI (included) GPS: BN220 Prop: 7042-2 Material: EPP Package Size: 675 x 174 x 285mm Length: 710mm Recommendations Recommend Propeller: 5-7" (Comes with 2 Bi-Blade 7" Props) Recommend Battery: 4S 1300-2200mah (Not Included) Recommend Radio: more than 6CH (Not Included) Includes 1x AtomRC RTH Dolphin V1.1 FPV Fixed Wing - Black/White 1x AtomRC BLS 30A 2-4S with 5V/3A BEC (Installed) 2x AtomRC 9g Digital Servo 300mm (Installed) 1x AtomRC 2306 1700Kv (Installed) 1x AtomRC F405 NAVI (Installed) 1x Sticker Sheet 1x User Manual 1x Carbon Tube 2x 7042 Props
$199.99
RaceDayQuads AxisFlying CineON C30 3" Cinewhoop Replacement Prop Guards
Axisflying’s new CineON 30 replacement ducts. Check out all our DJI-compatible frames, electronics, and accessories and all our Axis Flying Products! Features Spare ducts Lightweight and Durable Two color options Includes 2x Dual 3" Prop Guards
$9.89
RaceDayQuads AxisFlying CineON C35 3.5" Cinewhoop Replacement Prop Guards
Axisflying’s new CineON 30 replacement ducts. Check out all our DJI-compatible frames, electronics, and accessories and all our Axis Flying Products! Features Spare ducts Lightweight and Durable Two color options Includes 2x Dual 3.5" Prop Guards
$9.89
RaceDayQuads Banana Plug to XT60 or XT30 for Lipo Battery Chargers - Choose Version
This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and negative female banana plug output. Specifications: Banana Plug: 4mm Length: 235 or 180mm Wire: 16AWG Connector: XT60 or XT30 Includes: 1x Banana Plug to XT60 or XT30 for Lipo Battery Chargers
$3.05
RaceDayQuads BetaFPV Beta75X V2 Whoop Frame - Choose Your Color
Compared with the Beta75X frame, the Beta75X V2 frame only weighs 5.6g, It is lighter and the gravity center of the V2 frame is more concentrated. Increased the height of the frame loop, props can be completely wrapped by the protective ring. A better choice for a 75mm brushless whoop drone. What's more, the Beta75X V2 Frame is specially designed with two different motor mounting holes that support 1102 and 1103 brushless motors. Check out all our whoop frames & accessories and all our BetaFPV gear! Features The Beta75X V2 frame only weighs 5.6g, it is lighter and the whole drone’s gravity center more concentrated than the Beta75X V1. Meanwhile, the motor mount position uses a quadrilateral stretch structure, makes the frame more durable and stable. Increased the height of the frame loop, props are completely wrapped by the protective ring, more effectively protected the propellers. Designed two different motor mounting holes that support 1102 and 1103 brushless motors at the same time. With a 26mm*26mm FC mounting columns can match whoop style flight controllers like F4 AIO 12A FC. The battery slot fits BETAFPV 300mAh 2S and 300mAh 3S-S battery. Specifications Diagonal motor to motor distance: 75mm Motor mounting hole: for both 3 and 4 hole motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Battery slot size: 6.8x16.1mm Material: Plastic Weight: 5.6g Includes 1x BetaFPV Beta75X V2 Whoop Frame - Choose Your Color
$4.99
RaceDayQuads BetaFPV Gemfan 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack (1.5mm Shaft) - Choose Your Color
Take your drone racing to the next level with BetaFPV's Gemfan 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack. With a 1.5mm shaft and 3-blade design, you'll enjoy increased power and quicker speed. Make sure you're always ready to fly with this reliable and efficient prop. The 3-Blade props give more power and faster speed for racing. Check out all our Micro Props and BetaFPV gear, as well as all of our Gemfan products! Specifications Material: PC Weight: 1.69g/set (3-Blade) Blades: 2-Blade/3-Blade Pitch: 1.5 inch Propeller Diameter: 45mm Shaft: 1.5mm Includes 1x BetaFPV Gemfan Ducted 1815 Tri-Blade 45mm Micro/Whoop Prop 4 Pack (1.5mm Shaft) - Choose Your Color
$2.49
RaceDayQuads BetaFPV Meteor65 Pro Whoop Frame - Choose Your Color
Choose Between green and black for your whoop frame! Spare replacement part for the BetaFPV Meteor65 Pro Whoop. Check out all our Meteor65 parts & accessories, the rest of our whoop frames & accessories and all our BetaFPV gear! Features The space for the FC board is limited in order to support 35mm propellers on a 65mm drone. This Meteor65 Pro frame can only support cross shaped FC boards. The normal whoop FC board DO NOT fit this frame. Meteor65 Pro frame’s motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It also provides you with a more durable and smoother flight experience The frame is suitable for 31-35mm propeller like Gemfan 35mm-3 propellers. Pay attention, HQ 35mm props are a little bit bigger and DO NOT fit this frame. Specifications Material: PP Wheelbase: 65mm Prop Size: 31-35mm FC Mounting: 26x26mm Cross Shaped AIOs Motor Mounting: 6.6mm Weight: 3.2g Includes 1x BetaFPV Meteor65 Pro Whoop Frame
$4.99
RaceDayQuads BetaFPV Meteor65 Whoop Frame - Choose Your Color
Spare replacement part for the BetaFPV Meteor65 Whoop. Check out all our Meteor65 parts & accessories, the rest of our whoop frames & accessories and all our BetaFPV gear! Features Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience. The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller. The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors. Specifications Item: Meteor65 frame Material: PP Size: 65mm Weight: 3.14/pc Color: Transparent/Blue/Black/Green/Pink/Orange Motor mounting hole: For 0603 motor and 080X Series Motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Upgrade With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. Using triangle bilateral stretch structure, makes frame more aesthetic. Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller. Includes 1x BetaFPV Meteor65 Whoop Frame
$4.99
RaceDayQuads BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props; increases thrust for 1S whoops, with HD digital VTX. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g. The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors. The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX. Specification Item: Meteor75 Pro Brushless Whoop Frame Material: PP Wheelbase: 80.8mm Weight: 7.73g Color: Black/Blue/Cyan/Yellow/Orange/White/Red Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors FC mounting hole: 26x26mm, F4 1S 5A FC Includes 1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
$4.99
RaceDayQuads BetaFPV Meteor75 Whoop Frame - Choose Color
Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable. Check out all our whoop frames & accessories and all our BetaFPV gear! Features Meteor75 frame is ultralight only 5.68g, light but durable enough. The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable. The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better. Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time. With a 26mm*26mm FC mounting columns can match whoop style FC. Specification Material: Plastic Size: 75mm Weight: 5.68/pc Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern Includes 1x BetaFPV Meteor75 Whoop Frame
$4.99
RaceDayQuads BetaFPV Meteor85 Brushless Whoop Frame - Choose Color
This frame is customized for 85mm whoop drone and the frame for Meteor85, Meteor85 HD Digital VTX. With a marvelous design on the battery slot which keeps a low profile and triangle bilateral stretch structure of motor mounting position, this frame weighs only 11.32g. Features The new design frame reserves a battery slot, making it conveniently free from the battery strap and perfect for BETAFPV 450mAh 2S battery compared to the previous 85mm whoop frame. With the low profile of battery slot height, the drone's gravity center is reduced, and improved the sense of being compact. Meteor85 frame’s motor mounting position uses a triangle bilateral stretch structure, making the frame more aesthetic. It provides you more durable and smoother flight experience. The ultra-light and durable frame is PP material only 11.32g, which can match the F4 1-2S 12A AIO Brushless Flight Controller. The frame is suitable for 2" propellers. Recommend using BETAFPV canopy for nano HD camera, which is suitable for Caddx ant camera, or other nano cameras. It can also match the lighter BETAFPV canopy for a micro camera and install with a C02 Camera, C03 Camera, and M03 5.8G VTX. Specification Material: PP Wheelbase: 87.7mm Motor mounting hole: 110x motors, such as 1103 11000KV motors FC mounting hole: fully compatible with whoop style FC board mounting pattern, 26mm x 26mm Weight: 11.32g Includes 1x Meteor85 Brushless Whoop Frame (Grey or Black)
$5.99
RaceDayQuads BetaFPV Micro 2022 Toothpick/Whoop Canopy - Choose Your Color
The BETAFPV Micro 2022 Canopy comes with a new injection molding technique that brings durability and flexibility to the canopy, which is a great choice for micro cameras with 20° or 30° lenses. The hollow-out design help reduces the influence of heat on electronic parts and this canopy is suitable for BETAFPV Meteor Series. Check out all our whoop frames & accessories and our BetaFPV gear! Features Made with injection molding, this canopy is more durable, anti-scratch and heat-resistant, providing good protection for your electronics. Best replacement for the old generation of canopy on all whoop drones with micro cameras. Thoughtful designs for 1/3'' lens camera like C02 Pro camera and 1/4'' lens camera like C02 camera, compatible with all whoop frames like Beta65S frame, Beta65S Lite frame, Beta85 Pro 2 frame, Meteor65 frame and Meteor75 frame Light weight 1.60g (with camera mount) / 1.93g (with decorations). And 6 colors in White/Black/Blue/Pink/Green/Orange Specifications Material: PP Tilt: 20/30° Weight: 1.60g (with camera mount) / 1.93g (with decorations) Color: Black/White/Blue/Orange/Pink/Cyan BetFPV Compatible Frames: Beta65S/Meteor65/ Meteor75 Includes 1 x Micro Canopy 2022 (Black/White/Blue/Orange/Pink/Cyan) 1 x 20° Lens Camera Mount for C02 1 x 20° Lens Camera Mount 1 x 30° Lens Camera Mount 3 x Decorative Parts 4 x M1.4x3 Screws 4 x M1.4x4 Screws
$3.99
RaceDayQuads BetaFPV Micro Air Whoop Canopy - Choose Your Color
To elevate the flying experience, DIY enthusiasts have consistently prioritized the reduction of weight for the attainment of ultra-light structure for 1S whoop drones. Consequently, we have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice. Check out all our whoop frames & accessories and our BetaFPV gear! Features With a mere weight of 0.74g, the canopy boasts a simplistic yet durable structure, ensuring effortless installation. It stands as the premier pick for ultra-light small whoop drones. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano-sized Analog and HD Digital cameras that are widely sought after in the market. Positioned at the canopy's tail, reserved 4 antenna mounts enable seamless adjustment of the camera angle, offering a versatile range spanning from 25° to 50°, capturing the optimal image. More Compatibility Micro Air Canopy is the ideal option for constructing or enhancing ultra-light whoop drones featuring HD Digital VTX or Analog VTX, owing to its exceptional compatibility. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano Analog and HD Digital cameras. So Micro Air Canopy provides full support for the C03 Camera, C02 Camera, Avatar HD Lite Camera, ANT Lite Camera, and other cameras possessing a lens diameter of 9-10mm. Infinite Personalization We provide diverse color options for the Micro Air Canopy, enabling greater freedom for personality. This allows for aligning or color clashing the canopy color with your drone's theme. And equipped with our various colors of Meteor65 Air Brushless Whoop Frame adds flexibility, and agility during flight. Your drone will capture people's attention and showcase your unique personality and creativity. Specifications Item: Micro Air Canopy Material: PP Tilt: 25°~50° (Adjustable) Weight: 0.74g (Including one Camera Fixed Screw) Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green Includes 1x BetaFPV Micro Air Whoop Canopy - Choose Your Color
$2.99
RaceDayQuads BetaFPV Micro Whoop Canopy for HD Camera - Choose Color
This micro canopy is specially designed for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras, supporting an adjustable camera lens of 0-45°. It features high compatibility for both HD Digital VTX and Analog VTX like M03 Analog VTX. Features The canopy is designed with camera mounting holes for an adjustable camera lens of 0-45°. It is suitable for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras. Lightweight and two colors for options (Black/Blue). Using it with Meteor Series colorful frame will be more attractive. Recommend frames for Meteor65 Pro, Meteor75, and Meteor85 Adopt with injection molding technique, this canopy is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone. Unique design with three decorative parts like a knight, the drone flies in the air like a scientific spaceship cruising, making it very cool and special. Also, the decorative parts are detachable for better heat dissipation. Mounting Diagram The picture below is the diagram for this canopy. This canopy is applied to 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 Analog VTX, or most 14mm nano cameras. Other brands' VTXs with similar sizes are available to be mounted on this canopy. Specification Item: Micro Canopy for HD Camera Material: PP Tilt: 0-45° Weight: 2.50g (without decorations), 3.28g (with decorations) Color: Black/Blue Adapted VTX: 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 25-350mW 5.8G VTX Adapted FPV Camera: Walksnail Avatar Nano Camera, Runcam Nano Lite Camera, or most 14mm nano cameras Adapted Frame: Meteor65 Pro/Meteor75/Meteor85 Includes 1x Micro Canopy for HD Camera (Black/Blue) 3x Decorative Parts 3x M1.4x3 Screws 8x M1.4x5 Screws 3x M2x4 Screws Note: The decorative parts for both Micro Canopy for HD Camera and Canopy for Micro Camera 2022 are unavailable in common use even though they have a similar appearance.
$4.99
RaceDayQuads BetaFPV Replacement Shell for ELRS Micro TX - Choose Color
Did you crack the case or simply want to change the look of your BetaFPV ExpressLRS Micro TX? Now you can with this white replacement shell! Check out our Express LRS collection and all our BetaFPV products! Features Made of high-quality plastic material. It is very durable and stable Upgraded case designed. The USB port size is 6.5*13.5mm, which is compatible with 90% of the known USB Type-C cables Specifications Case Weight: 20g USB Port Dimensions: 6.5*13.5mm USB Port: Type-C Includes 1x BetaFPV Replacement Shell for ELRS Micro TX
$3.99
RaceDayQuads BetaFPV SuperG True Diversity Dual 1 Watt Micro/Nano ELRS 2.4GHz RC Transmitter Module - Choose Your Color
Based on ELRS V3.3 and collaborated with ELRS developer team, the First Ever Gemini Dual-Frequency Diversity Transmitter comes out! At present, SuperG Nano Transmitter can be fully activated to achieve the best link quality ever combined with diversity rx such as SuperD receiver or SuperP receiver. With dual 1W transmit power, it excels in anti-interference performance and stability, making it the ideal solution for demanding applications like FPV racing, long-range flight, and professional photography. Check out our RC Transmitters and all our BetaFPV products! Features Introducing the pioneering Gemini Dual-Frequency Diversity Transmitter, propelling ELRS into the era of dual-frequency capabilities. Dual 1W transmit power experienced amplified signal strength, expanded transmission distances, and a substantial increase in remote control range. In conjunction with existing true diversity receivers, activating the Gemini mode ensures unwavering signal stability even in the most intricate radio environments. Meticulously crafted from CNC aluminum alloy, the transmitter casing facilitates efficient thermal conductivity, complemented by an intelligently designed Heatsink system for optimal heat dissipation. Featuring 2 customizable buttons and 1 USB port, the transmitter accommodates external power sources, enabling steadfast long-range expeditions. Diagram Below is the diagram for the SuperG Nano Transmitter. Note: Please assemble the antenna before powering on. Otherwise, the PA chip in the SuperG Nano Transmitter will be damaged permanently. The following is the comparison information of the 3 products SuperG Nano Transmitter, ELRS Nano TX Module and ELRS Micro TX Module. It shows the advancing updates and specifications more than ever. SuperG Nano TX Nano TX Micro TX Max RF Power Dual-1000mW 500mW 500mW/1000mW RF Chip Dual SX128x Single SX128x Single SX128x Antenna Mode Gemini Single Single Cooling System Supported Unsupported Supported Backpack Supported Unsupported Supported External Power Supply Supported 7-13V Unsupported Supported 5-12V Know More About Diversity&Gemini Antenna Diversity mode, two antennas. Switch the two antennas regularly to read the RSSI value of the signal and determine which antenna to use to receive data. True Diversity mode, where both antennas receive data at the same frequency, and the antenna that receives the correct data first is used. Gemini mode, where two antennas simultaneously receive telemetry data with a frequency difference of 40MHz. They also transmit data simultaneously but at different frequencies. This means that you can receive the same data packets on different frequencies and antennas. This mode provides stable flight even in complex radio environments. Among them, Gemini is the most advanced function yet of ExpressLRS - Gemini mode currently! It owns the most stable mode for receiving signals and offers higher resistance to interference and stability, making it suitable for various applications. SuperG Nano Transmitter features Gemini mode. In a testing video by developer Jye Smith, it is shown that with a refresh rate of 1000Hz, the LQ value fluctuates between 90-100 when the true diversity receiver is in operation. However, after switching to Gemini mode, the LQ value stabilizes at 99-100. This demonstrates that ELRS goes to great lengths to ensure link stability. Combination with Diversity RX Gemini mode is built upon the hardware foundation of true diversity receivers and requires a dual RF output high-frequency module. When used with Super series products, the advantages of Gemini mode can be fully utilized. And The effects of using the transmitter and receiver in various modes are as follows: TX RX Antenna Receiving Mode ANT1/ANT2/Switch Single Single Diversity Diversity Gemini Single Gemini Single Single Diversity Diversity Gemini Gemini Using it together with True Diversity Receiver ensures a super stable yet strong radio link for pilots to fly in any environment that require extremely stable signals and low latency. Including long-range flights, multiplayer flights, and FPV racing. It gives pilots a robust and aggressive flight experience. Dual 1W Output Power The SuperG Nano Transmitter with Dual-active Antennas@Dual Frequencies, each boasting a powerful 1W transmission power. Experience stronger signals, longer transmission distances, and enhanced remote control range. Cooling System Iteration The casing part is made of CNC aluminum alloy with an anodized surface for durability. It efficiently dissipates heat, thanks to its optimized internal airflow and high-speed fan with copper heat fins. Fly with confidence and enjoy reliable performance every time. Combination with Most Radio TX The SuperG Nano Transmitter could be configured via LUA script. EdgeTX and OpenTX radio transmitter that supports CRSF could be used easily. It available for popular Nano interface TX when used with Micro-Nano Module Adapter including Radiomaster TX16, Boxer, Zorro. Jumper T16, T20, T Pro. Frsky QX7, X9, X Lite. Note: LiteRadio 3 Pro Radio Transmitter cannot support dual transmitter power above 100mW due to power supply issues. Express Yourself in Vibrant Colors SuperG Nano Transmitter is a cutting-edge device that offers a distinct and personalized flair, with a range of three vibrant color options including red, grey, and black. The combination of its sleek design, superior functionality, and colorful choices perfectly caters to those who seek elevate style and performance. ELRS Series The ExpressLRS Series expands its lineup with the addition of SuperG Nano Transmitter. To achieve exceptional link quality, pair the Gemini TX with Super series diversity receivers. BETAFPV takes the flying experience to new heights by introducing ELRS links that offer long-range capabilities, low latency, and high refresh rates in a radio control system. Basic Configuration SuperG Nano Transmitter is designed to receive signals using the Crossfire Serial Data Protocol (CRSF). Therefore, the interface of the transmitter's high-frequency module needs to support CRSF signal output. Taking the EdgeTX transmitter system as an example, we will explain how to configure the transmitter to output CRSF signals and control the transmitter using Lua scripts. In the EdgeTX system, navigate to MODEL SEL and enter the SETUP menu. Disable Internal RF (set to OFF), enable External RF, and set the Output Mode to CRSF, as shown in the picture below. Lua scripting is a lightweight and compact scripting language that can be embedded in the transmitter for convenient access to and modification of the transmitter's configuration. Download the elrsV3.lua script from the BETAFPV Support Center or ExpressLRS Configurator. Copy the official Lua script, elrsV3.lua, to the SD card of the transmitter, under the path Scripts/Tools. On the EdgeTX system, long-press the SYS button or MENU button to access the SD-HC CARD menu. In this menu, select the elrsV3.Lua script and run it. If the Lua script runs successfully, the interface will appear as shown in the illustration below. Custom Buttons SuperG Nano Transmitter reserves 2 buttons that can be customized by users. Here are the specific steps to operate: Enable the transmitter's WiFi or power it on and wait for 60 seconds to enter WiFi mode using LUA programming. The RGB indicator light will slowly flash in green, indicating that the transmitter has automatically enabled WiFi (WiFi name: ExpressLRS TX, WiFi password: expresslrs). Connect your smartphone or computer to the WiFi network and open a web browser. Enter http://10.0.0.1 to access the custom button settings page. In the corresponding button's Action column, select the desired custom function. Then, choose the button type and the number of presses or duration in the Press and Count columns. Click SAVE to complete the settings. Currently, there are 6 available functions that can be assigned to shortcut buttons. There are 2 ways to use the buttons: long-press and short-press. The duration of a long press can be customized, while the number of presses for a short press can also be customized. The following are the 6 functions that can be set: Unused VTX Setting Increase Output Power Enable WiFi Enter VTX Channel Enter Binding Mode Enter VTX Band The pictures below show the functionality of the transmitter in its factory default settings. (The left button is Button1 and the right button is Button2). Button Action Press Count Button1(Left Button) Enter Binding Mode Short Press 3 Times Increase Power Long Press For 0.5 seconds Button2(Right Button) Go to VTX Channel Menu Short Press 2 Times Send VTX Settings Long Press For 0.5 seconds Note: This transmitter hardware does not support button RGB lights. Bind & External Power Supply The SuperG Nano Transmitter utilizes the default firmware, which employs the ExpressLRS V3.3.0 official protocol without a Binding Phrase. Consequently, the binding receiver should also be equipped with firmware V3.0.0 or higher and have no Binding Phrase set. For optimal performance, it is recommended to position the transmitter's two antennas as far apart as possible. Put the receiver in a bound state and wait for connection. Click the "Bind" in the Lua script or the set custom button to enter the binding mode. If the Indicator has turned solid, it indicates that the device has been bound successfully. Note: If the firmware of the TX is reflashed and the Binding Phrase is configured, you cannot enter the Binding state through the above method. Please set the RX to the same frequency Binding Phrase, and the TX and RX can be connected automatically. When the dual transmit power exceeds 500mW, the SuperG Nano Transmitter exhibits relatively high power consumption, leading to a reduced battery life. To prolong the transmitter's usage time, it is advisable to utilize an external battery as a power source. The power consumption of the transmitter is not only related to the transmit power but also to the telemetry ratio. When using high power of 500mW and above, the return ratio can be set higher to reduce power consumption and extend use time. For example, in Gemini mode, the power consumption of setting the return ratio to 1:128 is 1000mA, while the power consumption of setting the return ratio to 1:2 is only half of 1:128. Note: When the voltage of the radio transmitter battery or external battery is lower than 7V (2S) or 10.5V (3S), please use the Gemini mode of 500mW and 1W carefully, otherwise the transmitter will enter the restart state due to insufficient power supply, resulting in disconnection out of control. FAQ When establishing a link, it is not possible to enter the LUA script. The ELRS LUA script version is outdated and requires an upgrade to elrsV3.lua. The baud rate of the radio transmitter is set below 400K, and it should be adjusted to a value above that. If there is no option to modify the baud rate, it is necessary to update the radio transmitter firmware, ensuring that EdgeTX is at version V2.7.0 or newer. If your radio transmitter is unable to use the F1000 Packet rate or prompts "Baud rate is too low". Reason: F1000 requires a baud rate higher than 400K, and the radio transmitter's baud rate is 400K by default. Solution: First update the baud rate (greater than 400K) setting in the Hardware from the Model Setup menu or System menu, then restart the radio transmitter to ensure the baud rate setting has been applied. Then change the Packet rate. When the F1000 is turned on, the Packet rate between the radio transmitter and the SuperG Nano Transmitter is less than 1000. Reason: EdgeTX version problem Solution: The EdgeTX version needs to be upgraded to 2.8.0 or above. And the LiteRadio 3 Pro Radio Transmitter defaults to EdgeTX 2.8.0 and does not have this problem. The SuperG Nano Transmitter's default firmware is ELRS V3.3.0, and users need to update the receiver to V3.0.0 or above to bind the frequency. Download the Instruction Manual for the SuperG Nano Transmitter Download the firmware for the SuperG Nano Transmitter Download the Backpack firmware for the SuperG Nano Transmitter Download the STL File for the SuperG Nano TX Insulated shell Specification Item: BETAFPV SuperG Nano Transmitter Module | ELRS 2.4G Weight: 44.8g Color: Black, Red, Grey Antenna Connector: 2x RP-SMA RF Power: 25mw/50mW/100mW/250mW/500mW/1000mW Packet Rate: 50Hz/100Hz/150Hz/250Hz/333Hz/500Hz/D250/D500/F500/F1000 Frequency Band: 2.4GHz ISM Backpack: support Input Voltage: 7V~13V DC Rated Current: 8V,1000mA@1000mW, 1:128, Gemini mode USB Port: Type-C Fan Voltage: 5V Default Firmware Version: ExpressLRS V3.3.0 Target Name: BETAFPV SuperG Nano 2.4GHz TX Includes 1x SuperG Nano Transmitter (Black/Red/Grey) 2x 2.4G Glue Stick Antenna 1x USB to Type-C Data Cable 1x Type-C Male to XT30U Male Power Cable 1x GH1.25 Male to FUTABA Male Signal Cable 1x Micro-Nano Module Adapter (Standard Version) 1x Double Side EVA Foam Tape 1x Instruction Manual 1x Service Card
$69.99
RaceDayQuads Caddx Ant Nano 1200TVL CMOS PAL/NTSC FPV Camera (1.8mm) - Choose Color & Aspect Ratio
The newest Caddx nano cam comes equipped with a 1200TVL 1/3" CMOS. Check out the rest of our ever growing selection of Caddx cameras! Specifications Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL Menu: Support Image: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio: >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Work Humidity: 20%~80% Weight: 2g (N.W.) Includes 1x Caddx Ant 1200TVL Nano FPV Camera (1.8mm) - Choose Color & Aspect Ratio
$17.89
RaceDayQuads Caddx Nebula Pro Nano 720p/120fps HD FPV Camera for DJI
The Caddx Nebula Pro Nano features the same great 720p/120fps performance and low 28ms latency of it's big brother the Nebula Pro Micro and weighs in at only 3.5 grams! If you want 120fps low latency HD in a nano form factor, this is your camera! We also carry the Caddx Nebula Pro Nano Vista Kit! Check out all our DJI compatible gear and our CADDX product selection! Specifications Image Sensor: 1/3 inch CMOS Sensor Aperture: F/2.0 Resolution: 720p/120fps Aspect Ratio: 16:9 & 4:3 (Switchable) Lens Size: 2.1mm f/2.1 Field of View: 150°(D);122°(H);93°(V)° Latency: 12-28ms (low latency mode), 30-40ms (high quality mode) Cable Length: 8cm Dimensions: 16.5x16x14mm Weight: 3.5g Includes 1x Caddx Nebula Pro Nano 720p/120fps HD FPV Camera for DJI 1x 8cm Cable
$66.89
RaceDayQuads Caddx Ratel 2 Micro 1200TVL CMOS 4:3/16:9 NTSC/PAL FPV Camera (2.1mm) - Choose Your Color
The second generation of the Caddx Ratel Camera, 1200TVL 1/1.8" starlight sensor with a 2.1mm lens. Check out the rest of our ever growing selection Micro FPV Cameras and all our Caddx products! Specifications Sensor: 1/1.8'' Inch Starlight Resolution: 1200TVL FOV: 165° Lens: 2.1mm TV System: NTSC & PAL (switchable) Image: 4:3 & 16:9 (switchable) WDR: Super WDR DNR: 3DNR Min. Illumination: 0.0001LUX Video Output: CVBS Day/Night: Auto/Color/B&W/EXT Shutter Speed: PAL:1/50~100,000; NTSC: 1/60~100,000 Wide Power Input: 5-40V Working Temperature: -20℃ ~ +60 ℃ Weight: 5.9g Dimension: 19*19*20mm Includes 1x Caddx Ratel 2 1200TVL 16:9/4:3 NTSC/PAL Micro FPV Camera
$30.99
RaceDayQuads Clip on Soldering Iron Stand for TS100
This handy little printed piece keeps the business end of your TS-100 off the table, cutting mat, silicone build mat, carpet, dirt, you get the idea! 3D printed with PLA material, it stands up to hours of soldering without warping. Need something else 3D printed for your bench? Check out all our tools, building supplies, and 3d printed accessories! Specifications Material: PLA Weight: 1.2g Includes 1x Soldering Iron Stand
$1.49
RaceDayQuads CNC Aluminum Transmitter Stand - Choose Your Color
The classic lightweight aluminum alloy TX kickstand, available in 3 color options. Fits X9D, QX7, and other transmitters with similar carry handles. We recommend setting the clamp screw tension just how you like, and keeping it there with some threadlocker. Check out our wide variety of RC Transmitters, parts & accessories! Specifications Dimensions: 77x138mm Weight: 66g Includes 1x CNC Aluminum Transmitter Stand
$6.49
RaceDayQuads EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color
The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop. Best match for 2206 - 2207 - 2306 motors around 2400kv. The Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints, aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller. Be sure to check out all our 5" props, and all our EMAX gear! Specifications Size: 5" Pitch: 4.3" Blades: 3-Blade Weight: 4.4 grams Moment of Inertia: 13.4 g*cm^2 Includes 4x EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop (2CW, 2CCW)
$3.49
RaceDayQuads EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop 12 Pack - Choose Your Color
EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear! The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props. The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight. A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable. The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. Be sure to check out all our 3" props, and all our EMAX gear! Specifications 3 inch diameter 2.4 inch pitch 3 blades Weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2 Includes 12x EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop (6CW, 6CCW)
$4.49
RaceDayQuads EMAX Avan Rush 2.5x1.9x3 Tri-Blade 2.5" Prop 4 Pack - Choose Your Color
The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit Geometry:2.5 inch diameter1.9 inch pitch3 bladesInertial Properties:weight: 1.4 gramsMoment of Inertia: 1.24 g*cm^2
$1.59
RaceDayQuads FIVE33 TinyTrainer TPU Kit - Choose Version
Replacement set of TPU prints for the Five33 TinyTrainer colored in teal or black, depending on your choice! Check out all our FIVE33 Frames & Accessories and FIVE33 Flying Gear! Includes 1x FIVE33 TinyTrainer TPU Kit - Choose Version 1x Battery Tray 1x Camera Mount 1x VTX/RX Tray 1x Turtle Fin 1x Turtle Stick 1x Sticker
$11.50
RaceDayQuads FIVE33 TinyTrainer V2 3" Replacement TPU Battery Tray - Choose Color
Replacement TPU battery tray for the FIVE33 TinyTrainer V2 3" Micro Frame Kit w/out TPU Check out all our FIVE33 Frames & Accessories and FIVE33 Flying Gear! Includes 1x FIVE33 TinyTrainer V2 3" Replacement TPU Battery Tray - Choose Color
$6.49
RaceDayQuads FlyFishRC Flash 2306 1750Kv Motor - Choose Your Color
The FlyFishRC Flash 2306 Motor uses the Uni-Bell structure design providing high crash resistance while shedding unwanted weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.During months of design, and testing, we are now proud to release these excellent motors, that combine top-notch performance, a slick look, reliable structure, and different color schemes.The motors use high-quality materials and have a sturdy structural design, with NMB bearings with N52HS heat-resistant magnets, and up to 220 ° high heat-resistant copper wire ensuring top-level performance and a much longer lifespan.High-quality 7075 Unibell bells make the motors even more durable. We haven’t forgotten about appearance! Stunning minimalist color schemes paired with a matte texture deliver smoothness and power with just enough responsiveness and controllable precision to fly. These motors give that unforgettable feeling of being locked in! The gray-purple series is produced with a delicate matte surface treatment process for even better visual aesthetics of the motor. The two-color matte texture is extremely difficult to manufacture compared to the regular process and we were able to overcome the difficulties and make it mass-producible. At present, FlyFishRC is the first company to have accomplished that. If you've been looking for a high-quality motor, the Flash motor is definitely a good choice. Check out our vast brushless motors selection, and our FlyFishRC product selection! Features Frosted Matte Unibell Design High-strength titanium alloy shaft and 7075 aluminum Ingenious non-slip structure of the prop seat 220°high temperature resistant copper wire NMB imported bearings and N52HS magnets Thickened motor base and wire outlet protection braces High-precision manufacturing and assembly process Strict dynamic balance and performance QC 34.2g (including 150mm wires) Specifications Model: Flash 2306 Kv: 1750Kv Configuration: 12N14P Mounting pattern: 16x16mm Stator Diameter: 23mm Stator Height: 6mm Shaft Diameter: Φ5.0mm Size: Φ29.4x31.8MMmm Weight: 32.2g Target: Freestyle & Racing FPV Includes 1x Flash 2306 Motor 1x Hardware Set
$20.89
RaceDayQuads FlyFishRC Osprey 5.8GHz 150mm RP-SMA Antenna LHCP - Black
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside. Check out all our DJI-compatible gear and our FlyFishRC product selection! Specifications Radiation Efficiency: 99% Avg. Gain: 2.82dbi Polarization: LHCP Connector: Gold-plated RP-SMA Dimensions(head): 14.1mm dia. X 14mm height. Length: 150mm Cable: Protection tube RG141 coax. Weight: 11.29g Includes 1x FlyFishRC Osprey 5.8Ghz 150mm RP-SMA Antenna LHCP - Black
$7.69
RaceDayQuads FlyFishRC Osprey 5.8GHz 150mm SMA Antenna RHCP - Choose Color
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside. Check out all our DJI-compatible gear and our FlyFishRC product selection!! Specifications Radiation Efficiency: 99% Avg. Gain: 2.82dbi Polarization: RHCP Connector: Gold plated SMA Dimensions(head): 14.1mm dia. X 14mm height. Length: 150mm Cable: Protection tube RG141 coax. Weight: 11.29g Includes 1x FlyFishRC Osprey 5.8Ghz 150mm SMA Antenna RHCP
$7.69
RaceDayQuads FlyFishRC Osprey 5.8GHz 60mm RP-SMA Antenna LHCP - Choose Color
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside. Check out all our DJI-compatible gear and our FlyFishRC product selection! Specifications Radiation Efficiency: 99% Avg. Gain: 2.82dbi Polarization: LHCP Connector: Gold-plated RP-SMA Dimensions(head): 14.1mm dia. X 14mm height. Length: 104mm Cable: Protection tube RG1.13 coax. Weight: 6.90g Includes 1x FlyFishRC Osprey 5.8Ghz 60mm RP-SMA Antenna LHCP
$6.69
RaceDayQuads FlyFishRC Osprey 5.8GHz 60mm SMA Antenna RHCP - Choose Color
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside. Check out all our DJI-compatible gear and our FlyFishRC product selection! Specifications Radiation Efficiency: 99% Avg. Gain: 2.82dbi Polarization: RHCP Connector: Gold-plated SMA Dimensions(head): 14.1mm dia. X 14mm height. Length: 60mm Cable: Protection tube RG1.13 coax. Weight: 6.90g Includes 1x FlyFishRC Osprey 5.8Ghz 60mm SMA Antenna RHCP
$6.69
RaceDayQuads FlyFishRC Volador II VX5 O3 5" Freestyle Frame Kit - Choose Color
The Volador II series is specifically designed for FPV freestyle and cinematic flying. Made with CNC aluminum alloy parts and high-quality T700 carbon. These frames have undergone countless design improvements and extensive testing to create ultra-crash resistant platform fit for beginners and professional pilots. The FlyFishRC Volador II Frame Kit is the perfect choice for freestyle pilots who want an easy-to-assemble aircraft. This frame offers high compatibility and is equipped with the necessary accessories to make assembly effortless and organized. 20x20mm and 30.5x30.5mm stack mounting holes, 20x20mm, 25x25mm VTX mounting makes this frame super convenient! With its simple construction design and reliable parts, you can enjoy your flying experience without any worries. Choose between the tropical mix color, and black for your TPU parts, on your quad. Great efforts have been made on the TPU parts. These TPU parts are cleverly designed for a more integrated and neat installation. They fit the frame perfectly, and improve the overall durability of the frame. The frame comes with all the accessories needed for analog and HD builds and is equipped with hardware with Loctite thread-locking agent for additional reliability. The tight structure design fully minimizes resonance. Check out our other 5" frames as well as the rest of our FlyFishRC products selection! Make sure to check out our other O3 compatible frames! Features High-end T700 carbon fiber Tight structure design minimizes resonance The new CNC aluminum camera plates effectively protect the camera The silicone shock-absorbers for the O3 AU eliminate jello Integrated XT60 connector for safety and reliability High-quality TPU parts Innovative anti-slip battery pads New motor wire protection tubes Compatible with both 19/20mm cameras Equipped with all accessories needed for analog and HD builds 12.9-grade strength hardware with Loctite threadlocker pre-applied High electronics compatibility V1 to V2 notable differences The frame is now significantly lighter. The new CNC side plate is lighter and perfectly fits the DJI O3 AU camera. The new battery anti-slip pad is more “sticky” and has better adhesion. Added keystone to even further reduce arm vibration. Added bottom screw gasket. Added motor wire protection tubes. The four middle screws on the top plate are now countersunk and sit flush, to eliminate possible battery damage during crashes.The new TPU arm protectors are now lighter and allow for easier disassembly. All models now come with two types of TPU antenna mount (with or without GPS mount). The thickness of the bottom and middle plates has been adjusted to 2.5mm. The connection structure between the arm and the clamp plate is slightly adjustedto distribute stress better. XT60 plug cutout on the top plate is now symmetrical, allowing installation of the XT60 in both orientations. Specifications Arm Thickness: 6mm Top plate thickness: 2.5mm Middle plate thickness: 2.5mm Bottom plate thickness: 2.5mm Keystone thickness: 5mm Side plate thickness: 2mm CNC Side plate thickness: 5mm Propeller size: 5~5.1 inch Material: T700 carbon plate FPV cam spacing: 19mm/20mm Weight: 177.4g(with TPU parts) Colour: Black/Tropical Mix (Optional) Total Dimensions: 177mmx165mm Wheelbase: 225mm Stack mounting holes: 20mmx20mm/30.5mmx30.5mm(M3) VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2) Includes 1x FlyFishRC Volador II VX5" O3 Freestyle Frame Kit - Choose Color 1x User Manual
$69.89
RaceDayQuads Forever Antenna Tube 2 Pack - Choose Your Color
The Forever Antenna Tube is the best way to protect your receiver antennas! Available in a number of colors, you receive two tubes and two black caps. Check out our other tools and building supplies! Includes 2x Forever Antenna Tube 2x Tube Cap
$3.05
RaceDayQuads Foxeer Apollo Micro HD FPV Camera for DJI - Choose Version
Foxeer enters the realm of digital starlight cameras with their new Apollo! This new camera is sure to impress and also comes in a standard lens option. Check out all our DJI compatible gear and our Foxeer product selection! Specifications Sensor: Sony 1/2" CMOS Video out: Digital Mipi Menu: No Aspect Ratio: 16:9 Resolution: Digital 720P/60fps FOV: Standard 160°, Starlight 170° Minimum Illumination 0.00001Lux White Balance Auto S/N Ratio: >65dB(AGC OFF) WDR: 100dB Size: 19*19mm Weight: 9.8g Includes 1x Foxeer Apollo Micro HD FPV Camera for DJI
$49.89
RaceDayQuads Foxeer Cat 3 Micro 1200TVL CMOS 4:3/16:9 PAL/NTSC FPV Camera (2.1mm) - Choose Your Color
The Foxeer Cat 3's large aperture lens excels in low light conditions while also providing optimal footage when exposed to LED's. No more worrying about getting a blown out image when going through a race gate at night. Looking for the Mini size? Check out the rest of our FPV cameras, and all our Foxeer products. Specifications Sensor Type: Sony 1/3" CMOS Sensor Scale: 4:3 (Default)/ 16:9 Switchable Tv System: PAL(Default)/NTSC Switchable Resolution: 1200TVL Lens: M12 2.1mm Low Light Lens FOV: 4:3 FOV-H: 100° FOV-D:125° 16:9 FOV-H: 100° FOV-D:115° Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec Video Output: CVBS Analog Signal Minimum Illumination: 0.00001Lux White Balance: Auto DNR: 3DNR WDR: 100dB DAY/NIGHT: EXT/Auto/Color/B&W Flight OSD: Voltage/Cam Title/Time Input Voltage: 4.6V~20V Language: ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本语 / EAAHNIKA Working Temperature: -10°~50°C RH90% MAX Working Humidity: 20~80% Storage Temperature: -20°~70°C Consumption: 95mA±15% @ DC12V Dimension: 19x19mm Weight: 10.7g (Exclude cable) Includes 1x Foxeer Cat 3 Micro Starlight 1200TVL FPV Camera 4:3/16:9 PAL/NTSC (2.1mm)
$49.89
RaceDayQuads Foxeer Cat 3 Mini 1200TVL CMOS 2MP 4:3/16:9 PAL/NTSC LUX Night FPV Camera (2.1mm) - Choose Your Color
The Foxeer Cat 3 Mini is a professional night vision FPV camera. It features a 1200TVL resolution and 0.00001lux night vision, allowing for clear footage even in the dark. This camera is perfect for nighttime flying. As it offers a large aperture night vision lens, this cam is designed to capture clear images and videos even in dark settings. With PAL/NTSC switchable video system, 4:3/16:9 aspect ratio, and 100dB WDR, you get balanced, low noise, and low latency footage. Enjoy your nighttime FPV flights with Foxeer Cat 3 Mini. - Choose between Black and Red for your preference of color! Check out our selection of mini FPV camera and our ever-growing selection of Foxeer products. Features Less Noise Less Latency 0.00001LUX Super Starlight Exclusive Optimization for LED Large Aperture Night Vision Support OSD & Menu Remote Control with Foxeer FC Specifications Sensor Type: Sony 1/3" CMOS Sensor Scale: 4:3(Default)/16:9 Switchable Tv System: PAL(Default)/NTSC Switchable Resolution: 1200TVL Lens: M12 2.1mm Low Light Lens FOV 4:3: FOV-H: 100° FOV-D:125° FOV 16:9: 100° FOV-D:115° Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec Flip: Up, Down, Left and Right Video Output: CVBS Analog Signal Latency: Low to 2ms Minimum Illumination: 0.00001Lux White Balance: Auto DNR: 3DNR WDR: 100dB DAY/NIGHT: EXT/Auto/Color/B&W Flight OSD: Voltage/Cam Title/Time Input Voltage: 4.6V~20V Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V Language: ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本语 / EAAHNIKA Working Temperature: -10°~50°C RH90% MAX Working Humidity: 20~80% Storage Temperature: -20°~70°C Consumption: 95mA±15% @ DC12V Dimension: 22 x 22mm; 28 x 22mm(with bracket) Weight: 12.2g(Exclude cable) User Manual Manual Includes 1x Foxeer Cat 3 Mini 1200TVL CMOS 2MP 4:3/16:9 PAL/NTSC LUX Night FPV Camera (2.1mm) - Choose Your Color 1x OSD Board 1x 2pin OSD Cable 12x Screws 6x Gasket Ring 1x Servo Cable
$49.89
RaceDayQuads Foxeer Lollipop V4 5.8GHz 10cm SMA Antenna 2 Pack
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. Plenty of variants for every build type. More variants coming soon!Check out all our VTX antennas and our Foxeer selection! Features Higher Gain than previous Lollipops Durable Structure Better Signal Due to Gold Plating Technology High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Gain: 2.6dBi Axial Ratio: Close to 1 Band Width: 5.5G~6GHz Radiation Efficiency: 98% SWR: 1.07 at Center Frequency Connector: SMA Dimension: 17x100mm Polarization: RHCP Case Material: PC+ABS Weight: 9.7g Includes 2x Foxeer Lollipop V4 5.8GHz 10cm SMA Antenna
$19.89
RaceDayQuads Foxeer Lollipop V4 5.8GHz 90° MMCX Antenna w/Tube 2 Pack - Choose Version
The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!Check out all our VTX antennas and our Foxeer Selection! Features Durable Structure Higher gain than previous versions High Quality Oxidation Resistant Materials Specifications Center Frequency: 5.7GHz Bandwidth: 5.5-6.0GHz Polarization: RHCP and LHCP Gain: 2.6Dbi Axial Ratio: Close to 1 VSWR: < 1.07 (at center frequency) Radiation Efficiency: 98% Shell Material: PC + ABS Antenna Dimensions: Φ11*85mm(short), Φ11*150mm(long) Connection: 90° MMCX Weight: 4.8g(short), 6.8g(long) Includes 2x Foxeer Lollipop V4 5.8GHz 90° MMCX Antenna
$19.89
You have seen 48 out of 155 products