RaceDayQuads
RaceDayQuads 0.8mm Heat Shrink Tubing 1 Ft. - Choose Color
We have expanded our line of building supplies with the addition of a variety of 0.8mm heat shrinks. Good for protecting those smaller wiring connections. Check out all our tools and building supplies! Specifications Outer Diameter: 0.8mm Temperature Rating: 125 C Voltage Rating: 600V Includes 1x 0.8mm Heat Shrink Tubing by the foot
$0.34
RaceDayQuads 1 Meter Carbon Fiber Rod (1pc) - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. These 1 meter (39.37") pultruded Carbon Fiber rods are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model. Be sure to choose the dimensions right for you. We carry Rods, Strips, Tubes and Square Tubes! Includes 1x 1 Meter Carbon Fiber Rod - Choose Your Size
$0.99
RaceDayQuads 1 Meter Carbon Fiber Square Tube (1pc) - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. These 1 meter (39.37") pultruded Carbon Fiber Square/Square Tubes are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model. Be sure to choose the dimensions right for you.(Outer Dimensions x Thickness x Length) We carry Rods, Strips, Tubes and Square Tubes! Includes 1x 1 Meter Carbon Fiber Square Tubes - Choose Your Size
$2.99
RaceDayQuads 1 Meter Carbon Fiber Strip (1pc) - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. These 1 meter (39.37") pultruded Carbon Fiber strips are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model. Be sure to choose the dimensions right for you.We carry Rods, Strips, Tubes and Square Tubes! Includes 1x 1 Meter Carbon Fiber Strip - Choose Your Size
$1.49
RaceDayQuads 1 Meter Carbon Fiber Tube (1pc) - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground. These 1 meter (39.37") pultruded Carbon Fiber Tubes are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model. Be sure to choose the dimensions right for you.(Outer Diameter x Thickness x Length) We carry Rods, Strips, Tubes and Square Tubes! Includes 1x 1 Meter Carbon Fiber Tube - Choose Your Size
$2.99
RaceDayQuads 1-8S LiPo Battery Checker Voltage Tester w/ Low Voltage Alarm
This a great two in one tool that gives a loud alarm at low voltage and can quickly display battery voltage. Simply plug a 1-8s battery's balance connector into the voltage meter/buzzer, and you will receive an instant readout of the total voltage and an individual reading of each cell. Don't be caught without this battery checker! Tip: If the buzzers are too loud for you, fill them with a little hot glue to mute it! Check out our other Battery Chargers and Accessories! Specifications Compatible with 1-8S Lipo/Li-ion/LiMn/Li-Fe batteries Voltage detection precision: +/-0.01V Low voltage alarm mode for 2S~8S; Adjustable alarm set value range:~2.7~3.8V Total voltage display range: 0.5V~36V Includes 1x 1-8S LiPo Battery Checker Voltage Tester w/ Low Voltage Alarm
$3.99
RaceDayQuads 16AWG XT30 Pigtail w/ Capacitor
Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Specifications Dimensions: 16AWG x 70mm (80mm Overall) Capacitor: 16V 100uF Weight: 4.5g Includes 1x 16AWG XT30 Pigtail w/ Capacitor
$3.05
RaceDayQuads 18650 Li-Ion Battery Case for FatShark Goggles
7.4V nominal voltage for use with existing Fat Shark goggles and fits into head strap like standard Fat Shark battery packs. Large capacity when used with high capacity cells (batteries not included). Batteries should be removed and charged via a dedicated 18650 style charger. Check out RDQ's goggle battery here. Check out our Lithium Ion Cells & Chargers all our FPV Goggles and Accessories! Includes 1x 18650 Li-Ion Battery Case for FatShark Goggles
$14.99
RaceDayQuads 1S LiPo Whoop Battery Checker - PH2.0 and JST 1.25
This product is the checker only. It does not include cables. This battery checker takes the guesswork out of wondering what levels your Whoop Batteries are at! A much needed accessory for any FPV pilot. Check out our other 1S Battery Chargers and Accessories! Features Accepts both types of the plugs 2.0 JST female and 1.25 JST female Battery voltage detection, reverse connection protection. Does not check HV batteries - only normal 3.7v Includes 1x 1S LiPo Whoop Battery Checker - PH2.0 and JST 1.25
$6.99
RaceDayQuads 24 LED Strip - 5V High Density LEDs for FPV Racing
This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for a long time to come! The strip can be cut into any length you desire. Here at RDQ, we like to cut this into 4x 6 LED strips and put them under each arm of the quad. Check out all our LEDs! Specifications Input voltage: 5V Length: 6.5" Includes 1x 24 LED Strip - 5V High Density LEDs for FPV Racing
$6.99
RaceDayQuads 2S Balance Lead JST-XH 2S1P Balance Connector Male/Female Plug - 10 Pack
Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 2S batteries! Note: Please check the colors of the wires and their respective polarities before connecting to your device. Check out the rest of our Tools & Building Supplies! Specifications Material: 22 AWG Silicon Wire Diameter (OD): 1.5mm Conductor: Tinned Copper Insulation: Silicone Rubber Diameter of single metal wire / quantity: 0.08mm / 30 Length of wire: approx. 16cm / 6.26 inch Includes 10x 2S1P JST Connector Male Plug with Wire 10x 2S1P JST Connector Female Plug
$4.99
RaceDayQuads 300W Portable Mini Heat Gun - White
Portable lightweight handheld electric hot air gun perfect for your heat shrink tubing! Check out our ever growing selection of tools and building supplies! Features The nozzle can reach 200°C/392°F in seconds. Made of high quality stainless steel inside and ABS plastic outside. Vents in both sides of the tail to reduce internal temps and extend lifespan. Built in folding rest Two pin US plug and 1m / 3ft cable Even a great substitute for your toaster oven! Includes 1x Portable Mini Heatgun
$12.99
RaceDayQuads 3mm Solder Wick - 1.5m
Desoldering wick is a copper braid used in the rework and repair of printed circuit boards, computers, cell phones or other electronics. Desoldering wick lets you easily remove the extra solder from components or pads on the circuit board. Just press the braid onto the connection with a hot iron and the solder wicks up into the braid. Check out all our soldering equipment and tools & building supplies ! Specifications Oxygen free copper Length: 1.5m Width: 3mm Includes 1x Solder Wick - 1.5m
$2.45
RaceDayQuads 3S Balance Lead JST-XH 3S1P Balance Connector Male/Female Plug - 10 Pack
Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please check the colors of the wires and their respective polarities before connecting to your device. Check out the rest of our Tools & Building Supplies! Features For IMAX B6 or Battery test. 3 cell 11.1V Lipo battery balance charger plug. For Vehicle Type: Multirotor, Airplane, Helicopter. Specifications Material: 22 AWG Silicon Wire Diameter (OD): 1.5mm Conductor: Tinned Copper Insulation: Silicone Rubber Length of wire: approx. 16cm / 6.26 inch Diameter of Single Metal wire/Quantity: 0.08mm/30 Includes 10x 3S1P JST Connector Male Plug with Wire 10x 3S1P JST Connector Female Plug
$4.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 45° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 45 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes.
$1.99
RaceDayQuads 4S Balance Lead JST-XH 4S1P Balance Connector Male/Female Plug - 10 Pack
Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please check the colors of the wires and their respective polarities before connecting to your device. Check out the rest of our Tools & Building Supplies! Features For IMAX B6 or Battery test. 4 cell 14.8V Lipo battery balance charger plug. Specifications Material: 26 AWG Silicon Wire Diameter (OD): 1.5mm Conductor: Tinned Copper Insulation: Silicone Rubber Length of wire: approx. 15cm / 5.9 inch Diameter of Single Metal wire/Quantity: 0.08mm/30 Includes 10x 4S1P JST Connector Male Plug with Wire 10x 4S1P JST Connector Female Plug
$5.05
RaceDayQuads 5S Balance Lead JST-XH 5S1P Balance Connector Male/Female Plug - 10 Pack
Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 5S batteries! Note: Please check the colors of the wires and their respective polarities before connecting to your device. Check out the rest of our Tools & Building Supplies! Features For IMAX B6 or Battery test. 5 cell 18.5V Lipo battery balance charger plug. For Vehicle Type: Multirotor, Airplane, Helicopter. Specifications Material: 26 AWG Silicon Wire Diameter (OD): 1.5mm Conductor: Tinned Copper Insulation: Silicone Rubber Length of wire: approx. 15cm / 5.9 inch Diameter of Single Metal wire/Quantity: 0.08mm/30 Includes 10x 5S1P JST Connector Male Plug with Wire 10x 5S1P JST Connector Female Plug
$4.99
RaceDayQuads 6S Balance Lead JST-XH 6S1P Balance Connector Male/Female Plug - 10 Pack
Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please check the colors of the wires and their respective polarities before connecting to your device. Check out the rest of our Tools & Building Supplies! Features For IMAX B6 or Battery test. 6 cell 22.2V Lipo battery balance charger plug. For Vehicle Type: Multirotor, Airplane, Helicopter. Specifications Material: 26 AWG Silicon Wire Diameter (OD): 1.5mm Conductor: Tinned Copper Insulation: Silicone Rubber Length of wire: approx. 15cm / 5.9 inch Diameter of Single Metal wire/Quantity: 0.08mm/30 Includes 10x 6S1P JST Connector Male Plug with Wire 10x 6S1P JST Connector Female Plug
$4.99
RaceDayQuads 8mm Fabric Tape (2ft)
This is that adhesive backed fabric tape you've probably seen holding motor wires on lots of pre-built micros. It's super handy stuff and its matte finish makes for a cleaner looking build than zip ties or electrical tape. We offer it in 2ft strips that are easily enough to fasten the motor wires of a couple 5" builds, and several more micros. Check out all our tools and building supplies! Includes 2ft 8mm Fabric Tape
$1.55
RaceDayQuads 900MHz Micro RC Antenna - Choose Your Connector
Micro RX Antenna made for 900MHz Receivers. Check out the rest of our RC transmitters, modules, and accessories! Specifications Frequency: 868MHz/915MHz Cable Length: 37mm Antenna Width: 62mm Connector: Ipex 1 or Ipex 4 Weight: 1.6g Includes 1x 900MHz Micro RC Antenna
$2.49
RaceDayQuads 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU - Choose Your Color
RX antenna tube holders compatible with both the normal and knurled standoffs. The antenna tubes are at a 90 degree angle and come in sets of 2. Works perfect with the Forever Antenna Tubes. Check out all our 3D printed accessories! Includes 1x 90° RX Antenna Tube Holder for Standoff 2 Pack - 3D Printed TPU
$1.99
RaceDayQuads Adjustable Servo Pushrod Linkage 5 Pack - Choose Your Size
Set of 5 simple adjustable pushrod linkages available for three rod sizes. Check out the rest of our servos, linkages & accessories and all our tools & building supplies! Includes 5x Adjustable Servo Pushrod Linkage
$2.05
RaceDayQuads Airbot OpenLager MicroSD Blackbox Module
The Airbot OpenLager gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and finding issues in your system. This device needs to be flashed with updated firmware before use. Follow the simple instructions in the wiring & info tab. Check out our other flight controller accessories, as well as the rest of our Airbot selection! Features It's faster than an average black box with a 4 bit SD interface clocked at 19.2MHz with DMA. It has buffer memory to ride out times when the SD card is busy (125kbytes with the current firmware) It fits in a smaller form factor builds with ease. ESD protection on input pins. And it has a flip-up microSD connector that is better at retaining the card in crashes and hard landings. Specifications Dimensions: 20x15mm Weight: 2g Includes 1x Airbot OpenLager Blackbox Wiring & Info The OpenLager is easy to use with async serial. First, wire according to the diagram below (an example of an OpenPilot-style connector is in the drawing). Note that you should attach the flight board's TX to Openlager's RX pin! OpenLager has an onboard regulator and can be powered with 3.3-5.5V (the regulator dropout voltage is low enough that the SD card will still work properly at 3.3V input).SD CARD MUST BE FAT16 OR FAT32 FORMAT. FIRMWARE MUST BE UPDATED BEFORE USING: Format your SD card. It must be either FAT or FAT32 format (SanDisk Extreme Pro 8GB recommended) Put the firmware lager.bin file into the sdcard and insert into the OpenLager Power on. The RED led should blink for several seconds. Wait until the RED led is stops blinking and continue to wait 10s more. Power off Format the SD card again Insert the SD card into OpenLager and power on. Power off; remove the card, and attach it to your computer. You'll find openLager has written a file to it called lager.cfg: { "startupMorse" : "", "useSPI" : false, "baudRate" : 2000000, "preallocBytes" : 104857600, "preallocGrow" : false} The important field to change is baudRate -- set it to the speed of the serial you'll be using for logging. dRonin supports 115200, 250000, 1500000, 2000000, and 2470000 bits per second. Cleanflight prefers 250000 bits per second, etc. The green LED is on always when power is applied, and the red LED blinks with activity when the card is writing. After 200ms of inactivity, the buffers on openLager will be forcibly flushed. If power is suddenly removed, the file may not be completed in the filesystem; this can be changed by setting preallocGrow to 'true' at the possible cost of garbage being present at the end of the file in this scenario. The firmware for openlager may be updated by putting an appropriate firmware image called lager.bin on the card.
$21.49
RaceDayQuads AKK Infinite DVR 30x30 25-1000mW 5.8GHz VTX - MMCX
in AKK's newest VTX which has built-in DVR, Smart Audio, up to 6s (7 - 26v) direct Lipo input, adjustable power output (25, 200, 600 & 1000 mW) w/ pit mode, and a 5v cam power output. Check out the rest of our selection of VTX's! Specifications Brand name: AKK Item name: Infinite DVR VTX Input voltage: 7V to 26V Extra features: Smart audio DVR Power supply: 5V output for camera Output power: 25/200/600mW/1000mW Antenna connector: MMCX Cable connector: Solder pads Records Video Size: VGA (640*480) Max Support TF Card: 32G Dimension: 36x36mm, 30.5 stackable hole Weight: 8.8g (excluding antenna) Features Support Smart audio 25/200/600/1000mW power switchable One button frequency and power setupOSD configuration using smart audio 7-26V input with 5V output for camera With MIC Notice: 5645/5925/5945 (E4/E7/E8) are not available due to FCC regulation. Selecting 5645/5925/5945 (E4/E7/E8) will be invalid action. Note: 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license. This equipment is being sold under FCC’s amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC.By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.Pacakge Included: 1x VTX 1x pigtail 1x cable FPV REGULATORY NOTICE The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
$23.99
RaceDayQuads Alligator Clips to XT60 Male Adapter Cable
Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check out our selection of chargers and accessories and our pigtails and adapters! Specifications Wire Gauge: 14 AWG Length: 250mm (10") Includes 1x Alligator Clips to XT60 Male Adapter Cable
$4.05
RaceDayQuads Aluminum 16x19mm Wing Motor Mount w/ Screws
Aluminum 16x19mm Wing Motor Mount w/ Screws Check out all of our wing hardware! Includes 1x Aluminum 16x19mm Wing Motor Mount w/ Screws
$3.05
RaceDayQuads Aluminum XT60 Surface Mount Bracket (1PC)
This socket mount will hold a male XT60 securely against carbon meaning you now have more options for safely mounting your power leads! The mounting hole distance is 20mmMale XT60 Not Included. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Specifications Mounting Pattern: 20mm, M2.5 Includes 1x Aluminum XT60 Surface Mount Bracket 2x M2.5 Screw
$2.05
RaceDayQuads AMASS MR60 Connector Male/Female Set
These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections and part swaps. Check out all our pigtails, adapters and connectors! Features Suitable for connecting ESCs and motors With protective sleeve Assistive weld foot, more stable Specifications Body Material and Surface Plating: Brass and gold plated Includes 1x AMASS MR60 Connector Male w/ Protective Shield 1x AMASS MR60 Connector Female w/ Protective Shield
$2.05
RaceDayQuads AMASS MT30 Connector Male/Female Set
These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections and part swaps. Check out all our pigtails, adapters and connectors! Features Suitable for connecting ESCs and motors With protective sleeve Assistive weld foot, more stable Specifications Body Material and Surface Plating: Brass and gold plated Includes 1x AMASS MT30 Connector Male w/ Protective Shield 1x AMASS MT30 Connector Female w/ Protective Shield
$2.30
RaceDayQuads AMASS XT150 w/ 6mm Gold Connector (1PC) - Choose Your Version & Color
These XT150 connector sets are ideal for large batteries, ESC, or motors! The durable nylon material is less likely to experience damage than other connectors and works well with up to 150 amps of current. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Features Nylon material holds 150A current for extended periods without exceeding 80 Degrees. Male connectors use a collet-style spliced contact area. Dovetail linking. Easy to solder. Specifications Max Amps: 150 Diameter: 6mm Connection Type: Male or Female Includes 1x AMASS XT150 w/ 6mm Gold Connector - Choose Version & Color
$0.90
RaceDayQuads Amass XT60E1 Male Connector (1PC)
This genuine Amass connector is an ideal option for safely and securely mounting your power leads. Amass is known for their quality and there is no exception with this connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Specifications Plating: Brass and Gold Mounting Pattern: 20mm, M2.5 Includes 1x Amass XT60E1 Male
$1.05
RaceDayQuads Amass XT60H Connector (1PC) - Choose Your Version
Premium Amass XT60H connector for when the classic XT60 just won't cut it. The snap on cover for the wire side of the connector means no need for heat shrink. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x Amass XT60H Connector - Male or Female
$0.65
RaceDayQuads Amass XT90H Connector (1PC) - Choose Version
These genuine Amass XT90H connectors are perfect for those that like to go big with their builds. If you need a connector that can to handle a lot of current, the XT90 will do the job with ease! Choose male or female, and your color preference! Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Specifications Plating: Brass and Gold Includes 1x Amass XT90 H Connector
$1.05
RaceDayQuads AMAXinno Competition 2207 1950Kv Motor
Upgrade your racing drone with the AMAXinno Competition 2207 1950Kv Motor. Built for speed and agility, this motor delivers powerful performance and precision control. Take your racing to new heights and leave the competition in the dust. Check out all our brushless motors and the entire AMAX selection! Specifications KV: 1950 Motor Mounting: M3 16x16 Shaft Size: 5mm Stator diameter: 22mm Stator height: 7mm Configuration: 12N14P Peak power (10S): >1000W Cable length: 150mm Weight with cables: 35g Weight without cables: 31.5g Includes 1x AMAXinno Competition 2207 1950Kv Motor 1x M5 Self-Locking Nut 4x M3x8mm Screw
$17.99
RaceDayQuads AMAXinno Competition Bando 2207 1950Kv Motor
Upgrade your racing drone with the AMAXinno Competition 2207 1950Kv Motor. Built for speed and agility, this motor delivers powerful performance and precision control. Take your racing to new heights and leave the competition in the dust. The Bando version takes the same design and performance but with a tougher bell construction intended for those who fly and crash over hard surfaces. Check out all our brushless motors and the entire AMAX selection! Specifications KV: 1950 Motor Mounting: M3 16x16 Shaft Size: 5mm Stator diameter: 22mm Stator height: 7mm Configuration: 12N14P Peak power (10S): >1000W Cable length: 150mm Weight with cables: 37g Weight without cables: 33.5g Includes 1x AMAXinno Competition Bando 2207 1950Kv Motor 1x M5 Self-Locking Nut 4x M3x8mm Screw
$18.69
RaceDayQuads AMAXinno Competition Bando 2306 1950Kv Motor
Upgrade your racing drone with the AMAXinno Competition 2306 1950Kv Motor. Built for speed and agility, this motor delivers powerful performance and precision control. Take your racing to new heights and leave the competition in the dust. The Bando version takes the same design and performance but with a tougher bell construction intended for those who fly and crash over hard surfaces. Check out all our brushless motors and the entire AMAX selection! Specifications KV: 1950 Motor Mounting: M3 16x16 Shaft Size: 5mm Stator diameter: 23mm Stator height: 6mm Configuration: 12N14P Peak power (10S): >1000W Cable length: 150mm Weight with cables: 35g Weight without cables: 31.5g Includes 1x AMAXinno Competition Bando 2306 1950Kv Motor 1x M5 Self-Locking Nut 4x M3x8mm Screw
$17.99
RaceDayQuads AMAXinno Performante A-Bell 2207 2550Kv Motor
AMAX Motors are back with a special half-hollow shaft and further improved "A-Bell" design, making slipped magnets and dented bells a thing of the past! Smooth, powerful and extremely durable!Check out all our brushless motors and the entire AMAX selection! Features Half-hollow shaft is for strength and light weight Fully encased magnets in the new A-Bell design Wave structure on bell for enhanced cooling and robustness Specifications Kv: 2550 Input Voltage: 3-4S Motor Height: 16.5mm Stator Dimensions: Φ22x7mm Output Shaft Dimensions: M5 Wire Dimensions: AWG x 150mm Mounting Pattern: 16x16mm Weight (w/o wires): 28.1g Includes 1x AMAX Performante A-Bell 2207 2550Kv Motor
$20.99
RaceDayQuads AMAXinno Superleggera A-Bell 2305.5 1750Kv Motor
AMAX Motors are back with a special half-hollow shaft and further improved "A-Bell" design, making slipped magnets and dented bells a thing of the past! Smooth, powerful and extremely durable!Check out all our brushless motors and the entire AMAX selection! Features Half-hollow shaft is for strength and light weight Fully encased magnets in the new A-Bell design Wave structure on bell for enhanced cooling and robustness Specifications Kv: 1750 Input Voltage: 4-6S Motor Height: 15.4mm Stator Dimensions: Φ23x5.5mm Output Shaft Dimensions: M5 Wire Dimensions: AWG x 150mm Mounting Pattern: 16x16mm Weight (w/o wires): 23.9g Includes 1x AMAX Superleggera 2305.5 1750Kv Motor
$23.99
RaceDayQuads AMAXinno Superleggera A-Bell 2305.5 1950Kv Motor
AMAX Motors are back with a special half-hollow shaft and further improved "A-Bell" design, making slipped magnets and dented bells a thing of the past! Smooth, powerful and extremely durable!Check out all our brushless motors and the entire AMAX selection! Features Half-hollow shaft is for strength and light weight Fully encased magnets in the new A-Bell design Wave structure on bell for enhanced cooling and robustness Specifications Kv: 1950 Input Voltage: 4-6S Motor Height: 15.4mm Stator Dimensions: Φ23x5.5mm Output Shaft Dimensions: M5 Wire Dimensions: AWG x 150mm Mounting Pattern: 16x16mm Weight (w/o wires): 23.9g Includes 1x AMAX Superleggera 2305.5 1950Kv Motor
$23.99
RaceDayQuads Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles
Revised version now includes a power switch and additional solder pads.The Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles fits so well you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!Specifications Input Voltage: 2S-4S (DC5.5x2.1mm) Internal Voltage: 5V 3A (with pad output) Output Voltage: 2S-4S (DC 5.5x2.1mm) Signal Input: Standard Fat Shark Receiver Port Including third-party receivers: Realacc, Furious, etc. Signal output: standard audio / video Power Switch Dimension: 48x28x12mm Weight: 10g (without extension cable) Includes 1x Analog FPV Adapter for DJI Goggles 1x Adapter mounting board and screws 1x Audio and video cable 1x Power cable Wiring Diagram
$11.99
RaceDayQuads Analog FPV FatShark Module Adapter V3 w/ Voltage Display for DJI Digital FPV Goggles
V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digital FPV Goggles so you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! We also have the V2 Adapter if you don't need the voltage display. Seen below installed in the Aluminum Case we carry specifically for this device:Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection! Specifications Input Voltage: 2S-4S (DC5.5x2.1mm) Internal Voltage: 5V 3A (with pad output) Output Voltage: 2S-4S (DC 5.5x2.1mm) Signal Input: Standard Fat Shark Receiver Port Including third-party receivers: Realacc, Furious, etc. Signal output: standard audio / video Dimension: 55x28x12mm Weight: 13g (without extension cable) Includes 1x Analog FPV Adapter V3 for DJI Goggles 1x Adapter mounting board and screws 1x Audio and video cable 1x Power cable 1x Allen Key Wiring Diagram
$15.99
RaceDayQuads Antenna Holder/Mount for Standoff - 3D Printed TPU - Choose Your Color
This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x Antenna Holder/Mount for Standoff - 3D Printed TPU
$1.99
RaceDayQuads Armattan Beaver 5" Antenna Mount - Rubber
Rubber antenna mount for the Armattan Beaver 5" frame. Check out our other 5" frames, as well as the rest of our Armattan selection! Includes 1x Armattan Beaver 5" Rubber Antenna Mount
$6.99
RaceDayQuads Armattan Beaver 5" Antenna Mount - TPU
TPU antenna mount for the Armattan Beaver 5" frame. Check out our other 5" frames, as well as the rest of our Armattan selection! Includes 1x Armattan Beaver 5" TPU Antenna Mount
$6.99
RaceDayQuads Armattan Beaver 5" Replacement Arm Core
Replacement arm core for the Armattan Beaver 5" frame. Check out our other 5" frames, as well as the rest of our Armattan selection! Includes 1x Spare Beaver 5" Arm Core
$2.49
RaceDayQuads Armattan Beaver 5" Replacement Bottom Plate
Replacement bottom plate for the Armattan Beaver 5" frame. Check out our other 5" frames, as well as the rest of our Armattan selection! Includes 1x Spare Beaver 5" Bottom Plate
$7.89
RaceDayQuads Armattan Bobcat HD 4" Replacement Aluminum Cam Brace
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/ Replacement part for the Armattan Bobcat 4", pieces go missing or break when you choose fun over risk, so we got you covered with this replacement aluminum cam brace. Check out the rest of our 4" frames, as well as the rest of our Armattan selection! Includes 1x Armattan Bobcat HD 4" Replacement Aluminum Cam Brace
$6.55
You have seen 48 out of 1940 products