RaceDayQuads
RaceDayQuads 24 LED Strip - 5V High Density LEDs for FPV Racing
This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for a long time to come! The strip can be cut into any length you desire. Here at RDQ, we like to cut this into 4x 6 LED strips and put them under each arm of the quad. Check out all our LEDs! Specifications Input voltage: 5V Length: 6.5" Includes 1x 24 LED Strip - 5V High Density LEDs for FPV Racing
$6.99
RaceDayQuads CLRacing 32 Programmable RGB LED Strip
The CLRacing 32 Programmable RGB LED Strip will make your quad light up the sky with their 32 ultra-bright RGB LEDs! Check out all our LEDs and all of our CLRacing products! Features Flexible, can set, cut and stick LED Lamps Spacing is 7.4mm, 1-32pcs bits RGB can be cut at will Specifications Input Voltage: 5V; 6.5V Power: 6.8W LED Lamp Spacing: 7.4mm Size: 4.5x238mm Weight: 2.6g Includes 1x CLRacing 32 Programmable RGB LED Strip 1x Heat Shrink (50cm) 1x Double Side Tape ( 30cm ) 1x Silicone Wire (3x60cm)
$9.99
RaceDayQuads FETtec Race Wire 6 3-6S RGB LEDs (2pc)
Enhance your RC car, wing, and quad with FETtec Race Wire 6 3-6S RGB LEDs (2pc). Constructed with advanced FET technology and high-quality components these LEDs are designed for maximum performance and reliability. With 3-6S adjustable voltage, these LEDs offer a bright and colorful light show that you can rely on. Check out all our LEDs and all of our FETtec products! Features 6 WS2812 2020 RGB LEDs, bright and every color is an option Easy handling Only one additional GND-wire needed when connected to FETtec ESC Low resistance For use with 3-6S 2 FETtec Race Wire 6 can be combited on one arm Configurable via FETtec Configurator / KISS GUI, Transmitter and OSD Specifications Weight: 1g Dimension: 8mm x 35mm User Manual User Manual Includes 1x FETtec Race Wire 6 3-6S RGB LEDs (2pc)
$10.99
RaceDayQuads Flywoo Digital RGB Motor LED M2 9x9mm - 4 PCS
Flywoo has just released their RGB motor LEDs compatible with any 9x9mm motor! Add these LEDs to your drones for more visibility and super glow aesthetics!! The TPU motor skids protect these LEDs and will diffuse those cool colors making your drone look next level!! Don't forget to check out our other LEDs and Flywoo Products! Specifications Hole: M2 / 9x9mm Weight: 1g Input Voltage: 5v (over 5v will burn the LEDs) Betaflight LED control Includes 4x Flywoo Digital RGB Motor LEDs 4x 3 conductor connection wire 4x Tpu protect mount
$7.99
RaceDayQuads Flywoo Frame Arm LED Racewire 1-4S (1pc) - Choose your color
Customize your quadcopter with Flywoo's 4x10x1mm racewire LED Board! Choose from five colors - white, red, green, blue, and pink - and enjoy the bright LED lighting during night flights. Solder each LED piece to your motor wires and get ready to be amazed! Buy one and it will snap into four pieces for each arm on your quad! Great for toothpick quads where you may need a little more wire length. Don't forget to check out our other LEDs and Flywoo Products! Specifications Color: white / red / green / blue / Pink Quantity: 4 PCS Power support: 1-4S Racewire with build in LED Includes 1x Flywoo Frame Arm LED Racewire 1-4S (1pc) - Choose your color
$1.29
RaceDayQuads Hee Wing T1 Ranger Full Color LED Driver Board
Take full control over your LED functionality with this LED driver board from HeeWing! This driver board runs off of 5V input and allows you to change color as well as flashing pattern of the LEDs on your T1 ranger! Check out our LED gear and the rest of our HeeWing products! Specifications Input Voltage: 5V Mounting Pattern: 20x20, M2 Driver Capability: 200 Lights (100 left, 100 right) Includes 1x HeeWing T1 Ranger Full Color LED Driver Board 1x Accessories Pack
$5.99
RaceDayQuads HGLRC RGB LED Lite 4 Pack - (25mm)
HGLRC brings you a brand new and upgraded HGLRC LED Lite -（25mm). The HGLRC LED Lite (25mm) light bar can be connected directly, which is more convenient for replacement/maintenance. The light board uses RGB LED light source, which can be controlled by a flight controller for programming the desired color effect. Check out all our LEDs, and all our HGLRC products Specifications Input voltage: 5V Size: 25mmx7.1mmx5mm Cable length: 70mm Weight: 0.65g (single) Includes 1x HGLRC LED Lite 4 Pack - (25mm) 4x SH1.03P double-ended 70mm cable
$7.99
RaceDayQuads HGLRC RGB LED Mini 4 Pack - (38mm)
HGLRC brings you a brand new and upgraded HGLRC LED Mini -（38mm). The HGLRC LED Mini (38mm) light bar can be connected directly, which is more convenient for replacement/maintenance. The light board uses RGB LED light source, which can be controlled by a flight controller for programming the desired color effect. Check out all our LEDs, and all our HGLRC products Specifications Input voltage: 5V Size: 28mmx7.1mmx5mm Cable length: 70mm Weight: 0.7g (single) Includes 4x HGLRC LED MINI Strips (38mm) 4x SH1.03P double-ended 70mm cable
$7.99
RaceDayQuads Matek 2812 5V Slim LED Strip Board 2 Pack
Pair of Matek WS2812 RGB LED Strips. Check out all our LEDs as well as the entire Matek selection! Specifications Voltage: 5V Size: 57x8mm Includes 2x Mateksys 2812 5V Slim LED Strip Board
$5.99
RaceDayQuads MenaceRC COB LED 4 Pack - Choose Color
These RC LEDs are perfect to be seen racing, for freestyle flying, lighting up your aircraft and also excellent for creative light painting at night! Check out all our LEDs, and all our and our Menace selection! Specifications Weight: 1.5g Size: 60mm x 8mm x 1.9mm Lipo Input: 4-6S Color Choices: Red, White, Blue, Green (select one) Unit Quantity: 4pc Includes 4x MenaceRC COB LED 4 Pack
$6.99
RaceDayQuads MenaceRC COB LED Driver
The Menace driver takes care of you. It converts the power from your model battery to the power requirement for the RC LEDs and can be configured from 2 to 8 LEDs depending on how brave or how bright you want to go. The ergonomically designed driver layout assists for simple installations into your model and with being light weight makes them a hardly noticeable weight addition to your model. Also the driver is designed as a constant current control circuit for improved power conversion and efficiency.Check out the LEDS made for this driver here! Check out all our LEDs, and all our and our Menace selection! Manuals Click here for the PDF Manual Click here for the PDF of how to wire up for Navigation Lighting Specifications Weight: 2.4g Size: 26mm x 26mm x 5.7mm Lipo Input: 2-6S Includes 4x MenaceRC COB LED 4 Pack
$9.99
RaceDayQuads SkyStarsRC Motor LED/PCB Race Wire 4 Pack
LED Race Wire with 4 programmable LEDs per board. Each pack comes with 4 race wires. Add customizable lights to your builds. Connects between motor wires and ESC. Works with most flight controllers with LED control pads. Specifications Weight: 1.1g LED Quantity: 6 Size: 9x35x1.6mm Lipo Input: 3-6S Color: Red, White, Blue, Green Unit Quantity: 4pc Includes 4x SkyStarsRC LED Race Wire Boards 4x Wire Sets 4x Clear Shrink Tube
$9.99
RaceDayQuads SpeedyBee Programmable RGB 2812 Cellular LED for the Master 5 V1 & V2
This part is perfect for your SpeedyBee Master 5 v1 & v2 Frame. This hexagonal board contains 20x 2812 LEDs that offer customizable, programmable lighting. It's easy to use - simply plug it into the SpeedyBee F7 V3 FC using the provided cable, or solder it in place. While it's designed for use with the Master 5 frame and SpeedyBee F7 V3 FC, feel free to use it on any other drone build! Check out all our LEDs, and our SpeedyBee products! Specification Logic power voltage(VDD): 3.0~7.5V R/G/B outport withstand voltage(Vds): 9V Logic input voltage(VI1): 0.5~5.5V R/G/B output voltage(Iout): 12mA Working temperature(Topr): -40~+85℃ Storage temperature(Tstg): -50~+150℃ ESD withstand voltage(Vesd): 5V Demension (LxWxH): 19x21x4.7mm Weight: 1g Includes 1x SpeedyBee Programmable RGB 2812 Cellular LED for the Master 5 V1 & V2
$4.99
RaceDayQuads TinysLEDs 2' 5v Addressable LED 30 AWG Silicone Wire Kit
2 feet of Grey, White, Black 30 gauge Silicone wire for riggin up those addressable LED's! Check out all our LEDs and all our TinysLEDs! Features Super flexible High strand count Specifications Diameter: 30AWG Length: 2' per wire Temperature Rating: 200C Inner Core: Multi-strand Outer Sheath: Pure silicone Color:Black, White, Grey Includes 1x 2'5v Addressable LED 30 AWG Silicone Wire - Grey 1x 2'5v Addressable LED 30 AWG Silicone Wire - Black 1x 2'5v Addressable LED 30 AWG Silicone Wire - White
$2.69
RaceDayQuads TinysLEDs 2-3S Micro LED - Choose Your Color
Yet another amazing product from our friends over at TinysLEDS! This time we have 2-3S Micro LEDs that can be used for all of your low voltage lighting needs. Perfect for RC cars or the RMRC Nano Goblin. Running on 2S these lights will be great for headlights or taillights. Don't forget to check out our other LEDs and TinysLEDs selection! Specifications Input Voltage: 2-3S Dimensions: 6.3x21.75mm Includes 1x Tinys LEDs 2-3S Micro LED
$2.70
RaceDayQuads TinysLEDs EasyLED PDB (2 Wire) w/ Connectors
This is the PDB for the new EasyLED series. Features 2-pin JST-SH connectors. This PDB comes with 5 ports, one for power, and 4 for LEDS to plug into. This product is here to make adding LEDs simpler and more stress-free. Check out all our LEDs, and all our TinysLEDs products! Specifications Dimensions: 12 x 16 mm with M3 mounting hole Weight: .75 with Connectors Weight: .3 grams without connectors Includes 1x TinysLEDs EasyLED PDB (2 Wire) w/ Connectors
$0.59
RaceDayQuads TinysLEDs Femto 4 Pro RGB LED (1PC)
The TinysLEDs Femto 4 Pro RGB LED is less than 3mm wide! It will fit on all micro frames! 4x 2020 WS2812b 5V addressable LEDs. Setup in Betaflight or Flight controller as 8 LEDs. Pro line is built for bigger quads that have space for larger 5v Regulators. Check out all our LEDs, and all our TinysLEDs products! Specifications Dimensions: 2.82 x 20.9 mm Weight: 0.2 gram Current: 180ma Full white (16ma Per Color/Per LED) Includes 1x TinysLEDs Femto 4 Pro RGB LED
$2.99
RaceDayQuads TinysLEDs Femto 8 Lite RGB LED w/ Side Connectors
8x 5 volt addressable LEDs with connectors on each side. Input and Output. Connectors are sideways to make connections easier for tight spots. Built for micros and will have no issues running off the onboard 5v regulators. Setup in Betaflight or Flight controller as 8 LEDs. Check out all our LEDs, and all our TinysLEDs products! Specifications Dimensions: 6x38 mm Weight: 1.2g Current: 8x 15mA LEDs on White Color ( 120mA on White ) Includes 1x TinysLEDs Femto 8 Lite RGB LED w/ Side Connectors
$3.75
RaceDayQuads TinysLEDs Lil' Lites 1-3S Micro LED (1pc) - Choose Your Color
Note: Use 5v Regulator on FC/ESC for 1s operation. It draws only 60mA per led board, so it will not be a lot. Most FCs will have enough overhead to power 1-2 LEDs The TinysLEDs Lil' Lites 1-3S Micro LED is the perfect choice for your next project. Featuring a small form factor and the ability to choose from 8 different colors, you can find the perfect LED to suit your needs. Don't forget to check out our other LEDs and TinysLEDs selection! Specifications Current Draw: 60mA Dimensions: 15.9mm x 3.99mm Weight: 0.19 grams each Contains: 1 LED Includes 1x TinysLEDs Lil' Lites 1-3S Micro LED (1pc) - Choose Your Color
$3.49
RaceDayQuads TinysLEDs Micro RaceLiteWire V2 2-4S (4pc) - Choose Your Color
Light up your quad with TinysLEDs Micro RaceliteWire V2 2-4S. This one-piece PCB will snap into four pieces. You will have to solder motor wires from the ESC to the LED PCB. With a straightforward process, you can set up your quad to light up, looking awesome during your races and freestyling. Works with most flight controllers with LED control pads. Note: Built for 2-4S batteries only. Comes as one PDB that splits up to 4 peices. Check out all our LEDs and all our TinysLEDs! Features Racelites brightness changes with throttle input. These are not constant on full brightness. They illuminate only when motors are spinning. Specifications Weight: 0.35g Voltage: 2-4S LiPo Dimensions: 9 x 15mm Includes 1x TinysLEDs Micro RaceLiteWire V2 2-4S (4pc) - Choose Your Color
$2.99
RaceDayQuads TinysLEDs PodLite V2 20x20 & 30x30 RGB LED Board w/ Connectors
The PodliteV2 now comes with connectors to make wiring easier. Compatible with any tiny rainbow cable kits and LEDs. Adding addressable lighting to your Quad Pods is easier now with the PodLite! it has 30x30mm and 20x20mm Mounting. Flat Bottom for mounting other items. For 20x20 mounting, clip the tabs and mount. Check out all our LEDs, and all our TinysLEDs products! Features 5x WS2812B Addressable LEDs M3 Sized holes for both 30 and 20mm mount spacing. 5 Volts, 300ma MAX Draw 2x LED Connector Flight controller addressable Weight: 2.1 Grams Includes 1x TinysLEDs PodLite V2 20x20 & 30x30 RGB LED Board w/ Connectors Instructions Layout for PodLite in BetaFlight: The top is where the 4 pads are on the board.
$4.99
RaceDayQuads TinysLEDs PodLite Whoop RGB LED Board w/ Connectors
Whoop PodLite. Femto LED on a Whoop mounting pattern. 7x LEDs in series. 8th LED is output to all connectors for the arms. Check out all our LEDs and our TinysLEDs selection! Specifications Current Draw: 7x 15mA LEDs on white Includes 1x Tinys LEDs PodLite Whoop RGB LED Board w/ Connectors CLI Dump Betaflight CLI Config Dump, Copy and Paste in CLI. # featurefeature LED_STRIP# ledled 0 2,3::C:1led 1 3,3::C:1led 2 4,3::C:1led 3 5,3::C:1led 4 6,3::C:1led 5 7,3::C:1led 6 8,3::C:1led 7 7,5::C:10led 8 8,6::C:10led 9 9,7::C:10led 10 10,8::C:10led 11 11,9::C:10led 12 12,10::C:10led 13 13,11::C:10led 14 14,12::C:10 Save Wiring Diagram
$4.99
RaceDayQuads TinysLEDs RGB RaceLiteWire LEDs (1PC)
Tiny's RaceLiteWires are racewires with the addition of configurable 5050 size RGB LEDs that get brighter the harder you send it! Also available in Mini size! Check out all our LEDs and all our TinysLEDs! Features 4x 5050 RGB LEDs integrated into Racewire. Racelites brightness changes with throttle input. These are not constant on full brightness. They illuminate only when motors are spinning. These are integrated Racewire and Racelites. These can be installed in any direction. There are pads to Allow you to wire up additional Racelites to the bottom of your Arms. Use the pads labeled "1,2,3" and wire them to the same pads on the second Racelite. You must insulate the bottom of the boards. Specifications Dimensions:8 x 40 mm Voltage: 3-6s Includes 1x TinysLEDs RGB RaceLiteWire LED Color Breakout Not Soldered = - Soldered = | Blue / Red / Green Yellow - | | White | | | Cyan. | - | Green - - | Blue | - - Red - | - Pink/Purple | | - Check out how to use them HERE
$1.79
RaceDayQuads TinysLEDs RGB RaceLiteWire Mini LEDs (1PC)
Tiny's RaceLiteWires Minis are race wires with the addition of configurable RGB LEDs that get brighter the harder you send it! Also available in full size! Check out all our LEDs and all our TinysLEDs! Features These are integrated Racewire and Racelites. These can be installed in any direction. There are pads to Allow you to wire up additional Racelites to the bottom of your Arms. Use the pads labeled "1,2,3" and wire them to the same pads on the second racelite. You must insulate the bottom of the boards. Specifications Lights: 4 Dimensions: 8 x 25 mm Voltage: 3-6s Weight: .7 grams each Includes 1x TinysLEDs RGB RaceLiteWire Mini LED RGB Color Key Check out how to use them HERE
$1.79
RaceDayQuads TinysLEDs SaddleLites V2 RGB LED 4 Pack
How do you mount LEDs to the side of a quad? It has always been a challenge until now! Just Slide these on like a saddle on a horse. Easy to install, Compact and hard to damage. No extra weight of TPU mounting or special tape or glue. The most clean install possible. LEDs are configured to act as 1 chip in your configuration. This ensures maximum safety for racing. No strings going out due to a damaged chip. Version 2 now includes a data out pad.Check out all our LEDs and our TinysLEDs selection! Betaflight or Other Flight Controller Setup instructions: Setup 1 LED in your Flight controller software. The saddlelite is 4 leds with the same signal. Specifications Input Voltage: 5V (Requires LED Signal) Current Draw: 150ma MAX per board on white. Dimensions: 10 x 9 x 5 mm Weight: 1 gram w/o wires Includes 4x TinysLEDs Saddle Lites V2 RGB LED
$11.99
RaceDayQuads TinysLEDs Super Bright 3-6S Thin LEDs - Choose Your Color
Same as the tiny ones, but a little more thin to fit on Catalyst frames. Check out all our LEDs, and all our TinysLEDs products! Size: 6mmx30mmx1.9mm Voltage: 3-6s Capable LED Features: 3x 5730 LED chips.
$2.49
RaceDayQuads TinysLEDs Super Bright 3-6S Tiny LEDs - Choose Your Color
These are the Super bright LEDs from our friends at TINYSLEDs. Grab the larger version here Check out all our LEDs and all our TinysLEDs! Specifications 3 - 6S rated 3 lights per board Board weight 0.40 Grams SUPER BRIGHT Includes 1x TinysLEDs Super Bright 3-6S Tiny LEDs
$1.99
RaceDayQuads TinysLEDs Super Bright Not-as-Tiny 3-6S LEDs - Choose Your Color
Same as the little ones, just twice as many LEDs. Check out all our LEDs and all our TinysLEDs! Specifications Voltage: 3-6s / 12-26 Volt. Size: 8 x 28 x 1.8 mm Weight: 0.4 Grams Power: 6x 0.5 watt LED Chips Includes 1x TinysLEDs Super Bright Not-as-Tiny 3-6S LEDs
$3.89
RaceDayQuads TinysLEDs Tiny Rainbow V2 4 Pack
Updated V2 of the Tiny Rainbow. Now with connector and connector-less options. These LEDs have the option to have connectors. If your connectors get broken off the pads to solder directly to the board are underneath. No longer do you need to worry about connectors rendering your LEDs worthless! Check out all our LEDs, and all our TinysLEDs products! Specifications Dimensions: 5.75x25mm Current Draw: 240mA on Full White, less with other colors per board Weight With Connectors: .75g Without Connectors: .60g Includes 4x Tiny Rainbow V2 LEDs
$8.99
RaceDayQuads TinysLEDs Tiny Trainer LED Kit - Standard
LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop PodLite 4x Femto8 Lite w/ Connectors 4x Short LED wires Betaflight Setup. Here is a quick CLI command config for LEDS # featurefeature LED_STRIP# ledled 0 2,3::C:1led 1 3,3::C:1led 2 4,3::C:1led 3 5,3::C:1led 4 6,3::C:1led 5 7,3::C:1led 6 8,3::C:1led 7 7,5::C:10led 8 8,6::C:10led 9 9,7::C:10led 10 10,8::C:10led 11 11,9::C:10led 12 12,10::C:10led 13 13,11::C:10led 14 14,12::C:10 Save
$19.99
RaceDayQuads ViFly Strobe Anti Collision Drone Light
VIFLY Strobe uses 5 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night. Each color has 3 modes, strobe, slow flash, and solid. You can use 3 white LEDs for the FAA 3-mile visibility request and a green/red LED for maintaining Line of sight (LOS). The strobe can remember your last setting of the mode, no need to set it again for the next time flight. Check out the rest of our LEDs, as well as our other ViFly Offerings. Features 3+ Miles of visibility 3 Different colors 3 Different light modes Compact and lightweight Easy installation for any drone Specifications Weight: 6g Working Time: 4 hours LED Colors: White, Red, and Green Visibility: 3+ Miles Charging voltage: 4.5-5.5V Charging Port: Micro USB Charging Time: 1.5 Hours Includes 1x ViFly Strobe Anti Collision Drone Light 1x Micro USB Cable 1x Velcro Pad Set
$14.99
