RaceDayQuads
RaceDayQuads Flywoo Finder V1.0 Buzzer w/ LED
Multipurpose buzzer from Flywoo, never lose your quad again. Check out the rest of our Buzzers & Alarms and our Flywoo gear selection! Features 100dB Buzzer w/ built in LED Active/Passive Buzzer Functionality Charges when plugged into flight controller Specifications Buzzer dB: 100 dB Size: 21*11*9.5MM Weight: 2.7 grams Includes 1x Flywoo Finder V1.0 Buzzer w/ LED Instructions for use The buzzer has two modes of operation: 1. It is compatible with the functions of the traditional active buzzer and synchronized with the flight control.2. When the flight control is normally connected, if the main battery in the flight is powered off, it can still automatically emit 100 dB of drip sound after 30 seconds of power failure, and the LED will emit white light.To turn off the buzzer: Press and hold the release button for more than 2 seconds, the Finder V1.0 turns off the sound.The Finder is compatible with all BF and CF flight controls. Just connect to the buzzer interface of the flight controller and it will work. When the flight control wiring is correct, the multi-rotor aircraft is powered on, and the flight control power supply will be automatically charged for the Finder (the red LED will light to indicate charging is in progress, the red light is off to indicate charging saturation; the red light flashing indicates flight control) Electricity, enter 30 seconds waiting time).
$8.99
RaceDayQuads JHE20B Quad Finder LED Buzzer Beacon w/ Internal Battery
The JHE20B Finder is compatible with all BF and CF flight controls. Just connect to the buzzer interface of the flight controller and it will work. Check out the rest of our Buzzers & Alarms while you're here! When the flight control wiring is correct, the multi-rotor aircraft is powered on, and the flight control power supply will automatically charge the JHE20B Finder. The red LED will light to indicate that charging is in progress, Red LED off means charging is saturated; red light flashing means flight controller is powered off, wait 30 seconds waiting time. The buzzer has two modes of operation: 1. It is compatible with the functions of the traditional active buzzer and synchronized with the flight control. 2. When the flight control is normally connected, if the main battery in the flight is powered off, it can still automatically emit 100 dB of drip sound after 30 seconds of power failure, and the LED will emit white light. How to turn off the buzzer: Press and hold the release button for more than 2 seconds, the JHE20B Finder turns off the sound. Features 100db audible alarm LED Beacon Specifications Size: 22x12x9.5mm Weight: 2.7 g Includes 1x JHE20B Finder 1x Wire Set
$6.99
RaceDayQuads Matek Lost Model Beeper & FPV FC 5V Loud Buzzer
It can be used on traditional PWM receivers or FPV racing flight controller. The tiny buzzer is drived by on board MCU. It can output louder sound than 5V active buzzers. Check out all our buzzers and alarms! Specifications Built-in MCU Working voltage range: 4.5~5.2V DC Power: 1W Max. Sound Output: 90dB Max. Size & Weight: 18x13x8mm, 2g Includes 1x Matek Lost Model Beeper & FPV FC 5V Loud Buzzer
$3.59
RaceDayQuads TuneRC Buzzer V2 with Built-in Driver Circuit
TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight controllers as long as there's a free/available port on it. Check out our selection of Buzzers and Alarms, and all TuneRC Products we carry. While you're at it, maybe a GPS module is a good idea? Feature V2 update of this buzzer comes with a Plug-in style configuration for ease of use. How to Connect the Buzzer to Flight Controllers that features “Buzzer+” “Buzzer-” Soldering Pads? You just need to wire the buzzer with the flight controller as per the instruction below. Note: You don’t need to do the mapping in Betaflight.FC “Buzzer+” — Buzzer Red Wire (3V-5V)FC “GND”— Buzzer Black Wire (GND)FC “Buzzer-” — Buzzer Blue Wire (Signal) How to Connect the Buzzer to EZ F411 AIO and Other Flight Controllers that don’t Feature Buzzer Pads？ Step 1. Firstly, please solder the buzzer’s signal wire ( blue wire) to any available/free port on the flight controller.For example, RX1 is mostly the available port on the EZ AIO, so you can connect theFC RX1 with the Buzzer Signal Wire (Blue Wire), FC 5V–Buzzer 3V-5V (Red Wire), FC GND–Buzzer GND (Black Wire) Step 2. In Betaflight, Enter “resource” in the CLI to find out the pin number corresponding to the port.For example, pin number on the EZ corresponding to RX1 is A10. Step 3. Free the available port in the CLI and then set the corresponding pin as beeper, finally enter “save” in the CLIFor example, on the EZ AIO board, in the CLI, enter “resource serial_RX 1 NONE” , and then enter “resource beeper 1 A10”. Finally enter “save” and you are done. Specifications Sound Loudness: ≥80db@3V, ≥85db@5V Length: 10.5mm Height: 7.5mm Weight: 1.4g (including wires) Wires Length: 75mm Blue wire: for signal Red wire: for 3V-5V Black wire: for GND Input Voltage 3-5V Includes 1x TuneRC Buzzer V2 with Built-in Driver Circuit
$1.99
RaceDayQuads ViFly Beacon Wireless Self-Powered Drone Buzzer
Some drones like DJI models are installed with GPS that only provide you the craft location, with the sound help, you can find your lost drone precisely. With the built-in motion sensor and lipo battery, VIFLY Beacon can detect the drone crash automatically and make the alarm to help you locate the lost drone. Check out our selection of Buzzers and Alarms, and all ViFly products we carry. While you're at it, maybe a GPS module is a good idea? Wireless, No Soldering Required The mechanism of VIFLY Beacon is based on the motion sensor, attach it anywhere on the drone to detect the movement, no wire, no soldering. Loud Sound & Bright LED To easily find the lost drone in long distance, VIFLY Beacon is installed with a very loud beeper that the dB is over 100. In addition, the LED on VIFLY Beacon can flash automatically when the built-in light sensor detects the light darkness Anti-theft Technology If someone wants to take the done away when it is in alarm status, VIFLY Beacon will beep continuously to warn the picker. Position Light at Night VIFLY Beacon LED light can flash automatically at night to make the drone visible when the built-in light sensor detects the darkness. Weighs only 6 grams that almost no impact on your drone’s flight performance. Specifications Size (L x W x H) 25x14x15 mm Weight 6 grams Volume Up to 105 dB Working Time Up to 30 hours Charge Time 1.5 hours Battery 80mAh LiPo Input Voltage 4.5 - 5.5 V Alarm Pattern First 30 Seconds: Low Volume 30s to 2 Hours: Max Volume Every 6s After 2 Hours: Every 12s / Idle Until Dawn Includes 1x VIFLY Beacon Wireless Self-Powered Drone Buzzer 1x Double Sided Tape 1x Ziptie 1x Instructions
$15.99
RaceDayQuads ViFly Finder 2 Buzzer - Lost Drone Finder/Locater/Alarm
The Vifly Finder 2 is compatible with any flight controller or receiver with buzzer or pwm connection (just about everything) and its internal battery means it keeps functioning even if your flight battery is ejected, damaged or drained. This is a very simple to use, very effective drone recovery device. For the VILFY Finder 2, we have released a new version. The new version has longer working time and louder volume. In addition, the battery discharge rate lowered a lot and it can be stored for very long time even you didn't charge it. " Check out all our buzzers and alarms and all our Vifly products! Features Advanced ViSense Technology. With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer automatically enter into sleep mode at night to save power and not disturb. Much Louder than Standard Buzzer.To easily find the lost drone in long distance, the VIFLY Finder 2 buzzer is designed to install a very loud beeper that the DB is over 100. Two Options to Disarm the Buzzer. Option 1, Disarm with button: Disconnect main battery, hold disarm button on VIFLY Finder 2 for 1-5 seconds then release. Option 2, Disarm with main battery: Disconnect main battery, then connect main battery for 3-6 seconds and disconnect it again. It will beep 3 times when disarmed successfully. Compatible with Both FPV quadcopter and RC Airplane. VIFLY finder 2 is programmed to be compatible with any flight controllers with PWM or Buzzer connections in your FPV quads, and regular receivers in your RC airplanes. No extra setup required, it will automatically recognize the device it is connected to. Specifications Volume: Up to 105 dB Working Time: Up to 30 hours Charge Time: 1.5 hours Battery: 80mAh LiPo Input Voltage:4.5-8.5V Dimensions: 24x13x16 mm Weight: 5 g Wiring Diagram Wiring Diagram: Simply connects the VIFLY Finder 2 to your flight controller(racing drone) or receiver(RC airplane) via 3 wires, and it’s ready to enjoy your flight. How To Use
$14.99
RaceDayQuads ViFly Finder Mini - Lost Drone Finder/Locater/Alarm
The ViFly Finder Mini is a smaller more compact version of the ViFly Finder 2, weighing only 2.7g. This buzzer is perfect for compact builds and uses a buzzer that operates at up to 100 dB. Check out all our buzzers and alarms and all our Vifly products! Specifications Volume: Up to 100 dB Working Time: Up to 7 hours Battery: 40mAh LiPo Dimensions: 19x11x12 mm Weight: 2.7g Includes 1x Vifly Finder Mini - Lost Drone Finder/Locater/Alarm
$12.99
