Hitec
Hitec HRC35055S, Hitec HS-5055MG Digital Metal Gear Sub Micro Servo
HRC35055S, Hitec HS-5055MG Digital Metal Gear Sub Micro Servo This is a Hitec HS-5055MG Digital Metal Gear Sub Micro Servo. Since its introduction, the HS-55 has set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Enter the new HS-5055MG digital, metal geared version...with this new servo Hitec takes ultra micro performance to the next level without breaking the bank. The new HS-5055MG is a perfect choice for ”smaller” high performance electric helicopters, aircraft and sailplanes, as well as micro surface applications. Specifications: Speed: 4.8V: 0.2 sec/60 deg. 6.0V: 0.17 sec/60 deg. Torque: 4.8V: 18.05 oz/in 6.0V: 22.2 oz/in Length: 0.9in (22.8mm) Width: 0.46in (11.6mm) Height: 0.94in (24mm) Weight: 0.34oz (9.5g) Limited Warranty: Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product. This product was added to our catalog on December 16, 2021
$26.99
Hitec HRC44178, Hitec Universal Balancing Adapter
HRC44178, Hitec Universal Balancing Adapter This product was added to our catalog on December 16, 2021
$16.99
Hitec HRC31422S, Hitec HS-422 Deluxe Servo
HRC31422S, Hitec HS-422 Deluxe ServoThis product was added to our catalog on December 16, 2021
$23.99
Hitec HRC32065S, Hitec HS-65MG Mighty Feather Servo
HRC32065S, Hitec HS-65MG Mighty Feather ServoThis product was added to our catalog on December 16, 2021
$49.55
Hitec HRC33065S, Hitec HS-65HB Karbonite Micro Servo
HRC33065S, Hitec HS-65HB Karbonite Micro Servo This is the HS-65HB Karbonite Micro Servo from Hitec. Considered one of the most powerful servos in the micro class, the HS-65 is offered with a choice of “shock resistant” Metal or “zero wear” Karbonite gears. The 65 series features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars. This version of the servo has a universal connector which will fit Airtronics, JR, Hitec and Futaba receivers (be careful with the polarity of the connector for Futaba radios). As most servo gears wear, they develop lash and slop. Loose gears mean less control of your model. As a Hitec exclusive, Karbonite gears have eliminated gear lash and slop forever. Karbonite gears are four times stronger than conventional white resin gears, and they are less likely to strip under the shock and loads that would usually break standard gears. We tested Karbonite gears with 250,000 cycles under load and they showed no sign of wear. The result, greater reliability and control with Hitec's Karbonite gear technology. Specifications: Speed: 4.8V: 0.14 sec/60 deg. 6.0V: 0.11 sec/60 deg. Torque: 4.8V: 24.99 oz/in 6.0V: 30.55 oz/in Length: 0.93in (23.6mm) Width: 0.46in (11.6mm) Height: 0.94in (24mm) Weight: 0.39oz (11.1g) This product was added to our catalog on December 16, 2021
$29.99
Hitec HRC31055S, Hitec HS-55 Sub Micro Servo
HRC31055S, Hitec HS-55 Sub Micro Servo Hitec HS-55 Sub Micro Analog Servo. Small in size, this servo is best at home in small electric park flyers. This version of the servo has a universal connector which will fit Airtronics, JR, Hitec and Futaba receivers (be careful with the polarity of the connector for Futaba radios). Specifications: Speed: 4.8V: .17 sec/60 degrees 6.0V: .14 Sec/60 Degrees Torque: 4.8V: 15.27 oz-in 6.0V: 18.05 oz-in Weight: 0.28 oz Length: .89" (22.8mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm) This product was added to our catalog on December 16, 2021
$19.99
Hitec HRC32082S, Hitec HS-82MG Micro Metal Gear Servo
HRC32082S, Hitec HS-82MG Micro Metal Gear Servo This is the HS-82MG Micro Metal Gear Servo from Hitec. The HS-82MG, is the replacement for the HS-81 series of servo which features many improvements over its predecessor. A more powerful motor, updated electronics and longer life potentiometer yield higher torque, more speed and better centering for today’s more demanding Radio Control Applications. The HS-82MG is perfect for smaller aircraft and helicopters where a durable geartrain is required.Specifications: Speed: 4.8V: 0.12 sec/60 deg. 6.0V: 0.1 sec/60 deg. Torque: 4.8V: 39 oz/in 6.0V: 47 oz/in Length: 1.17in (29.72mm) Width: 0.47in (11.94mm) Height: 1.16in (29.46mm) Weight: 0.66oz (18.7g) This product was added to our catalog on December 16, 2021
$24.99
Hitec HS-7955TG, Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo
HS-7955TG, Hitec HS-7955TG V2 Torque Titanium Gear Digital Servo Overview Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case. Features: G2 Digital Circuit Coreless Motor Dual Ball Bearing Supported Output Shaft Titanium Gear Train (MK first gear) *** Programmable Features Include: *** Dead Band Width Direction of Rotation Speed of Rotation (slower) End Points Neutral Points Fail Safe On/Off Fail Safe Point Resolution* (default is high resolution) Overload Protection* (default is off) *these features are only programable with the HFP-20 field programmer (#44430) Specifications: Speed: 4.8V: 0.19 sec/60 deg. 6.0V: 0.15 sec/60 deg. Torque: 4.8V: 250 oz/in 6.0V: 333 oz/in Length: 1.57in (39.87mm) Width: 0.78in (19.81mm) Height: 1.45in (36.83mm) Weight: 2.29oz (65g) Limited Warranty:Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product. This product was added to our catalog on December 16, 2022
$99.99
Hitec HRC33765S, Hitec HS-765HB Universal Sail Arm Analog Servo
HRC33765S, Hitec HS-765HB Universal Sail Arm Analog Servo Overview The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters. Key Features: Up to 140 degrees of travel 4.5 inch arm Dual Ball Bearing Supported Output Shaft *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail Specifications: Speed: 4.8V: 0.28 sec/60 deg. 6.0V: 0.23 sec/60 deg. Torque: 4.8V: 153 oz/in 6.0V: 183 oz/in Length: 2.32in (59mm) Width: 1.14in (29mm) Height: 1.97in (50mm) Weight: 3.88oz (110g) Limited Warranty:Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product. This product was added to our catalog on July 2, 2020 This product was added to our catalog on December 16, 2022
$75.95